Skip to content

L
linux
Commit f9aaa1a2 authored by Nicolas Ferre's avatar Nicolas Ferre
Browse files
Options

ARM: at91: remove unneeded header files 

These files were left behind with no reason. Remove them.
Signed-off-by: default avatarNicolas Ferre <nicolas.ferre@atmel.com>
parent 50755f6f
Hide whitespace changes
Inline Side-by-side
Showing with 0 additions and 179 deletions
arch/arm/mach-at91/at91_tc.h deleted 100644 → 0
View file @ 50755f6f
/*
* arch/arm/mach-at91/include/mach/at91_tc.h
*
* Copyright (C) SAN People
*
* Timer/Counter Unit (TC) registers.
* Based on AT91RM9200 datasheet revision E.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef AT91_TC_H
#define AT91_TC_H
#define AT91_TC_BCR 0xc0 /* TC Block Control Register */
#define AT91_TC_SYNC (1 << 0) /* Synchro Command */
#define AT91_TC_BMR 0xc4 /* TC Block Mode Register */
#define AT91_TC_TC0XC0S (3 << 0) /* External Clock Signal 0 Selection */
#define AT91_TC_TC0XC0S_TCLK0 (0 << 0)
#define AT91_TC_TC0XC0S_NONE (1 << 0)
#define AT91_TC_TC0XC0S_TIOA1 (2 << 0)
#define AT91_TC_TC0XC0S_TIOA2 (3 << 0)
#define AT91_TC_TC1XC1S (3 << 2) /* External Clock Signal 1 Selection */
#define AT91_TC_TC1XC1S_TCLK1 (0 << 2)
#define AT91_TC_TC1XC1S_NONE (1 << 2)
#define AT91_TC_TC1XC1S_TIOA0 (2 << 2)
#define AT91_TC_TC1XC1S_TIOA2 (3 << 2)
#define AT91_TC_TC2XC2S (3 << 4) /* External Clock Signal 2 Selection */
#define AT91_TC_TC2XC2S_TCLK2 (0 << 4)
#define AT91_TC_TC2XC2S_NONE (1 << 4)
#define AT91_TC_TC2XC2S_TIOA0 (2 << 4)
#define AT91_TC_TC2XC2S_TIOA1 (3 << 4)
#define AT91_TC_CCR 0x00 /* Channel Control Register */
#define AT91_TC_CLKEN (1 << 0) /* Counter Clock Enable Command */
#define AT91_TC_CLKDIS (1 << 1) /* Counter CLock Disable Command */
#define AT91_TC_SWTRG (1 << 2) /* Software Trigger Command */
#define AT91_TC_CMR 0x04 /* Channel Mode Register */
#define AT91_TC_TCCLKS (7 << 0) /* Capture/Waveform Mode: Clock Selection */
#define AT91_TC_TIMER_CLOCK1 (0 << 0)
#define AT91_TC_TIMER_CLOCK2 (1 << 0)
#define AT91_TC_TIMER_CLOCK3 (2 << 0)
#define AT91_TC_TIMER_CLOCK4 (3 << 0)
#define AT91_TC_TIMER_CLOCK5 (4 << 0)
#define AT91_TC_XC0 (5 << 0)
#define AT91_TC_XC1 (6 << 0)
#define AT91_TC_XC2 (7 << 0)
#define AT91_TC_CLKI (1 << 3) /* Capture/Waveform Mode: Clock Invert */
#define AT91_TC_BURST (3 << 4) /* Capture/Waveform Mode: Burst Signal Selection */
#define AT91_TC_LDBSTOP (1 << 6) /* Capture Mode: Counter Clock Stopped with TB Loading */
#define AT91_TC_LDBDIS (1 << 7) /* Capture Mode: Counter Clock Disable with RB Loading */
#define AT91_TC_ETRGEDG (3 << 8) /* Capture Mode: External Trigger Edge Selection */
#define AT91_TC_ABETRG (1 << 10) /* Capture Mode: TIOA or TIOB External Trigger Selection */
#define AT91_TC_CPCTRG (1 << 14) /* Capture Mode: RC Compare Trigger Enable */
#define AT91_TC_WAVE (1 << 15) /* Capture/Waveform mode */
#define AT91_TC_LDRA (3 << 16) /* Capture Mode: RA Loading Selection */
#define AT91_TC_LDRB (3 << 18) /* Capture Mode: RB Loading Selection */
#define AT91_TC_CPCSTOP (1 << 6) /* Waveform Mode: Counter Clock Stopped with RC Compare */
#define AT91_TC_CPCDIS (1 << 7) /* Waveform Mode: Counter Clock Disable with RC Compare */
#define AT91_TC_EEVTEDG (3 << 8) /* Waveform Mode: External Event Edge Selection */
#define AT91_TC_EEVTEDG_NONE (0 << 8)
#define AT91_TC_EEVTEDG_RISING (1 << 8)
#define AT91_TC_EEVTEDG_FALLING (2 << 8)
#define AT91_TC_EEVTEDG_BOTH (3 << 8)
#define AT91_TC_EEVT (3 << 10) /* Waveform Mode: External Event Selection */
#define AT91_TC_EEVT_TIOB (0 << 10)
#define AT91_TC_EEVT_XC0 (1 << 10)
#define AT91_TC_EEVT_XC1 (2 << 10)
#define AT91_TC_EEVT_XC2 (3 << 10)
#define AT91_TC_ENETRG (1 << 12) /* Waveform Mode: External Event Trigger Enable */
#define AT91_TC_WAVESEL (3 << 13) /* Waveform Mode: Waveform Selection */
#define AT91_TC_WAVESEL_UP (0 << 13)
#define AT91_TC_WAVESEL_UP_AUTO (2 << 13)
#define AT91_TC_WAVESEL_UPDOWN (1 << 13)
#define AT91_TC_WAVESEL_UPDOWN_AUTO (3 << 13)
#define AT91_TC_ACPA (3 << 16) /* Waveform Mode: RA Compare Effect on TIOA */
#define AT91_TC_ACPA_NONE (0 << 16)
#define AT91_TC_ACPA_SET (1 << 16)
#define AT91_TC_ACPA_CLEAR (2 << 16)
#define AT91_TC_ACPA_TOGGLE (3 << 16)
#define AT91_TC_ACPC (3 << 18) /* Waveform Mode: RC Compre Effect on TIOA */
#define AT91_TC_ACPC_NONE (0 << 18)
#define AT91_TC_ACPC_SET (1 << 18)
#define AT91_TC_ACPC_CLEAR (2 << 18)
#define AT91_TC_ACPC_TOGGLE (3 << 18)
#define AT91_TC_AEEVT (3 << 20) /* Waveform Mode: External Event Effect on TIOA */
#define AT91_TC_AEEVT_NONE (0 << 20)
#define AT91_TC_AEEVT_SET (1 << 20)
#define AT91_TC_AEEVT_CLEAR (2 << 20)
#define AT91_TC_AEEVT_TOGGLE (3 << 20)
#define AT91_TC_ASWTRG (3 << 22) /* Waveform Mode: Software Trigger Effect on TIOA */
#define AT91_TC_ASWTRG_NONE (0 << 22)
#define AT91_TC_ASWTRG_SET (1 << 22)
#define AT91_TC_ASWTRG_CLEAR (2 << 22)
#define AT91_TC_ASWTRG_TOGGLE (3 << 22)
#define AT91_TC_BCPB (3 << 24) /* Waveform Mode: RB Compare Effect on TIOB */
#define AT91_TC_BCPB_NONE (0 << 24)
#define AT91_TC_BCPB_SET (1 << 24)
#define AT91_TC_BCPB_CLEAR (2 << 24)
#define AT91_TC_BCPB_TOGGLE (3 << 24)
#define AT91_TC_BCPC (3 << 26) /* Waveform Mode: RC Compare Effect on TIOB */
#define AT91_TC_BCPC_NONE (0 << 26)
#define AT91_TC_BCPC_SET (1 << 26)
#define AT91_TC_BCPC_CLEAR (2 << 26)
#define AT91_TC_BCPC_TOGGLE (3 << 26)
#define AT91_TC_BEEVT (3 << 28) /* Waveform Mode: External Event Effect on TIOB */
#define AT91_TC_BEEVT_NONE (0 << 28)
#define AT91_TC_BEEVT_SET (1 << 28)
#define AT91_TC_BEEVT_CLEAR (2 << 28)
#define AT91_TC_BEEVT_TOGGLE (3 << 28)
#define AT91_TC_BSWTRG (3 << 30) /* Waveform Mode: Software Trigger Effect on TIOB */
#define AT91_TC_BSWTRG_NONE (0 << 30)
#define AT91_TC_BSWTRG_SET (1 << 30)
#define AT91_TC_BSWTRG_CLEAR (2 << 30)
#define AT91_TC_BSWTRG_TOGGLE (3 << 30)
#define AT91_TC_CV 0x10 /* Counter Value */
#define AT91_TC_RA 0x14 /* Register A */
#define AT91_TC_RB 0x18 /* Register B */
#define AT91_TC_RC 0x1c /* Register C */
#define AT91_TC_SR 0x20 /* Status Register */
#define AT91_TC_COVFS (1 << 0) /* Counter Overflow Status */
#define AT91_TC_LOVRS (1 << 1) /* Load Overrun Status */
#define AT91_TC_CPAS (1 << 2) /* RA Compare Status */
#define AT91_TC_CPBS (1 << 3) /* RB Compare Status */
#define AT91_TC_CPCS (1 << 4) /* RC Compare Status */
#define AT91_TC_LDRAS (1 << 5) /* RA Loading Status */
#define AT91_TC_LDRBS (1 << 6) /* RB Loading Status */
#define AT91_TC_ETRGS (1 << 7) /* External Trigger Status */
#define AT91_TC_CLKSTA (1 << 16) /* Clock Enabling Status */
#define AT91_TC_MTIOA (1 << 17) /* TIOA Mirror */
#define AT91_TC_MTIOB (1 << 18) /* TIOB Mirror */
#define AT91_TC_IER 0x24 /* Interrupt Enable Register */
#define AT91_TC_IDR 0x28 /* Interrupt Disable Register */
#define AT91_TC_IMR 0x2c /* Interrupt Mask Register */
#endif
arch/arm/mach-at91/gsia18s.h deleted 100644 → 0
View file @ 50755f6f
/* Buttons */
#define GPIO_TRIG_NET_IN AT91_PIN_PB21
#define GPIO_CARD_UNMOUNT_0 AT91_PIN_PB13
#define GPIO_CARD_UNMOUNT_1 AT91_PIN_PB12
#define GPIO_KEY_POWER AT91_PIN_PA25
/* PCF8574 0x20 GPIO - U1 on the GS_IA18-CB_V3 board */
#define GS_IA18_S_PCF_GPIO_BASE0 NR_BUILTIN_GPIO
#define PCF_GPIO_HDC_POWER (GS_IA18_S_PCF_GPIO_BASE0 + 0)
#define PCF_GPIO_WIFI_SETUP (GS_IA18_S_PCF_GPIO_BASE0 + 1)
#define PCF_GPIO_WIFI_ENABLE (GS_IA18_S_PCF_GPIO_BASE0 + 2)
#define PCF_GPIO_WIFI_RESET (GS_IA18_S_PCF_GPIO_BASE0 + 3)
#define PCF_GPIO_ETH_DETECT 4 /* this is a GPI */
#define PCF_GPIO_GPS_SETUP (GS_IA18_S_PCF_GPIO_BASE0 + 5)
#define PCF_GPIO_GPS_STANDBY (GS_IA18_S_PCF_GPIO_BASE0 + 6)
#define PCF_GPIO_GPS_POWER (GS_IA18_S_PCF_GPIO_BASE0 + 7)
/* PCF8574 0x22 GPIO - U1 on the GS_2G_OPT1-A_V0 board (Alarm) */
#define GS_IA18_S_PCF_GPIO_BASE1 (GS_IA18_S_PCF_GPIO_BASE0 + 8)
#define PCF_GPIO_ALARM1 (GS_IA18_S_PCF_GPIO_BASE1 + 0)
#define PCF_GPIO_ALARM2 (GS_IA18_S_PCF_GPIO_BASE1 + 1)
#define PCF_GPIO_ALARM3 (GS_IA18_S_PCF_GPIO_BASE1 + 2)
#define PCF_GPIO_ALARM4 (GS_IA18_S_PCF_GPIO_BASE1 + 3)
/* bits 4, 5, 6 not used */
#define PCF_GPIO_ALARM_V_RELAY_ON (GS_IA18_S_PCF_GPIO_BASE1 + 7)
/* PCF8574 0x24 GPIO U1 on the GS_2G-OPT23-A_V0 board (Modem) */
#define GS_IA18_S_PCF_GPIO_BASE2 (GS_IA18_S_PCF_GPIO_BASE1 + 8)
#define PCF_GPIO_MODEM_POWER (GS_IA18_S_PCF_GPIO_BASE2 + 0)
#define PCF_GPIO_MODEM_RESET (GS_IA18_S_PCF_GPIO_BASE2 + 3)
/* bits 1, 2, 4, 5 not used */
#define PCF_GPIO_TRX_RESET (GS_IA18_S_PCF_GPIO_BASE2 + 6)
/* bit 7 not used */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7