Commit fa0406a8 authored by Paul Walmsley's avatar Paul Walmsley Committed by paul

OMAP3 SRAM: clear the SDRC PWRENA bit during SDRC frequency change

Clear the SDRC_POWER.PWRENA bit before putting the SDRAM into self-refresh
mode.  This prevents the SDRC from attempting to power off the SDRAM,
which can cause the system to hang.
Signed-off-by: default avatarPaul Walmsley <paul@pwsan.com>
parent d75d9e73
......@@ -77,7 +77,9 @@ lock_dll:
sdram_in_selfrefresh:
ldr r4, omap3_sdrc_power @ read the SDRC_POWER register
ldr r5, [r4] @ read the contents of SDRC_POWER
mov r9, r5 @ keep a copy of SDRC_POWER bits
orr r5, r5, #0x40 @ enable self refresh on idle req
bic r5, r5, #0x4 @ clear PWDENA
str r5, [r4] @ write back to SDRC_POWER register
ldr r5, [r4] @ posted-write barrier for SDRC
ldr r4, omap3_cm_iclken1_core @ read the CM_ICLKEN1_CORE reg
......@@ -128,10 +130,9 @@ wait_sdrc_idle1:
and r5, r5, #0x2
cmp r5, #0
bne wait_sdrc_idle1
restore_sdrc_power_val:
ldr r4, omap3_sdrc_power
ldr r5, [r4]
bic r5, r5, #0x40
str r5, [r4]
str r9, [r4] @ restore SDRC_POWER, no barrier needed
bx lr
wait_dll_lock:
ldr r4, omap3_sdrc_dlla_status
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment