Commit fa40f377 authored by Grant Likely's avatar Grant Likely

irqdomain: Clean up aftermath of irq_domain refactoring

After refactoring the irqdomain code, there are a number of API
functions that are merely empty wrappers around core code. Drop those
wrappers out of the C file and replace them with static inlines in the
header.
Signed-off-by: default avatarGrant Likely <grant.likely@linaro.org>
parent 1aa0dd94
......@@ -239,7 +239,7 @@ void __init beatic_init_IRQ(void)
ppc_md.get_irq = beatic_get_irq;
/* Allocate an irq host */
beatic_host = irq_domain_add_nomap(NULL, 0, &beatic_pic_host_ops, NULL);
beatic_host = irq_domain_add_nomap(NULL, ~0, &beatic_pic_host_ops, NULL);
BUG_ON(beatic_host == NULL);
irq_set_default_host(beatic_host);
}
......
......@@ -192,7 +192,7 @@ static int psurge_secondary_ipi_init(void)
{
int rc = -ENOMEM;
psurge_host = irq_domain_add_nomap(NULL, 0, &psurge_host_ops, NULL);
psurge_host = irq_domain_add_nomap(NULL, ~0, &psurge_host_ops, NULL);
if (psurge_host)
psurge_secondary_virq = irq_create_direct_mapping(psurge_host);
......
......@@ -110,6 +110,10 @@ struct irq_domain {
};
#ifdef CONFIG_IRQ_DOMAIN
struct irq_domain *__irq_domain_add(struct device_node *of_node,
int size, int direct_max,
const struct irq_domain_ops *ops,
void *host_data);
struct irq_domain *irq_domain_add_simple(struct device_node *of_node,
unsigned int size,
unsigned int first_irq,
......@@ -121,17 +125,30 @@ struct irq_domain *irq_domain_add_legacy(struct device_node *of_node,
irq_hw_number_t first_hwirq,
const struct irq_domain_ops *ops,
void *host_data);
struct irq_domain *irq_domain_add_linear(struct device_node *of_node,
extern struct irq_domain *irq_find_host(struct device_node *node);
extern void irq_set_default_host(struct irq_domain *host);
/**
* irq_domain_add_linear() - Allocate and register a linear revmap irq_domain.
* @of_node: pointer to interrupt controller's device tree node.
* @size: Number of interrupts in the domain.
* @ops: map/unmap domain callbacks
* @host_data: Controller private data pointer
*/
static inline struct irq_domain *irq_domain_add_linear(struct device_node *of_node,
unsigned int size,
const struct irq_domain_ops *ops,
void *host_data);
struct irq_domain *irq_domain_add_nomap(struct device_node *of_node,
void *host_data)
{
return __irq_domain_add(of_node, size, 0, ops, host_data);
}
static inline struct irq_domain *irq_domain_add_nomap(struct device_node *of_node,
unsigned int max_irq,
const struct irq_domain_ops *ops,
void *host_data);
extern struct irq_domain *irq_find_host(struct device_node *node);
extern void irq_set_default_host(struct irq_domain *host);
void *host_data)
{
return __irq_domain_add(of_node, 0, max_irq, ops, host_data);
}
static inline struct irq_domain *irq_domain_add_legacy_isa(
struct device_node *of_node,
const struct irq_domain_ops *ops,
......
......@@ -23,8 +23,11 @@ static DEFINE_MUTEX(revmap_trees_mutex);
static struct irq_domain *irq_default_domain;
/**
* irq_domain_alloc() - Allocate a new irq_domain data structure
* __irq_domain_add() - Allocate a new irq_domain data structure
* @of_node: optional device-tree node of the interrupt controller
* @size: Size of linear map; 0 for radix mapping only
* @direct_max: Maximum value of direct maps; Use ~0 for no limit; 0 for no
* direct mapping
* @ops: map/unmap domain callbacks
* @host_data: Controller private data pointer
*
......@@ -32,10 +35,10 @@ static struct irq_domain *irq_default_domain;
* register allocated irq_domain with irq_domain_register(). Returns pointer
* to IRQ domain, or NULL on failure.
*/
static struct irq_domain *irq_domain_alloc(struct device_node *of_node,
int size,
const struct irq_domain_ops *ops,
void *host_data)
struct irq_domain *__irq_domain_add(struct device_node *of_node,
int size, int direct_max,
const struct irq_domain_ops *ops,
void *host_data)
{
struct irq_domain *domain;
......@@ -50,23 +53,16 @@ static struct irq_domain *irq_domain_alloc(struct device_node *of_node,
domain->host_data = host_data;
domain->of_node = of_node_get(of_node);
domain->revmap_size = size;
domain->revmap_direct_max_irq = direct_max;
return domain;
}
static void irq_domain_free(struct irq_domain *domain)
{
of_node_put(domain->of_node);
kfree(domain);
}
static void irq_domain_add(struct irq_domain *domain)
{
mutex_lock(&irq_domain_mutex);
list_add(&domain->link, &irq_domain_list);
mutex_unlock(&irq_domain_mutex);
pr_debug("Added domain %s\n", domain->name);
return domain;
}
EXPORT_SYMBOL_GPL(__irq_domain_add);
/**
* irq_domain_remove() - Remove an irq domain.
......@@ -99,30 +95,28 @@ void irq_domain_remove(struct irq_domain *domain)
pr_debug("Removed domain %s\n", domain->name);
irq_domain_free(domain);
of_node_put(domain->of_node);
kfree(domain);
}
EXPORT_SYMBOL_GPL(irq_domain_remove);
/**
* irq_domain_add_simple() - Allocate and register a simple irq_domain.
* irq_domain_add_simple() - Register an irq_domain and optionally map a range of irqs
* @of_node: pointer to interrupt controller's device tree node.
* @size: total number of irqs in mapping
* @first_irq: first number of irq block assigned to the domain,
* pass zero to assign irqs on-the-fly. This will result in a
* linear IRQ domain so it is important to use irq_create_mapping()
* for each used IRQ, especially when SPARSE_IRQ is enabled.
* pass zero to assign irqs on-the-fly. If first_irq is non-zero, then
* pre-map all of the irqs in the domain to virqs starting at first_irq.
* @ops: map/unmap domain callbacks
* @host_data: Controller private data pointer
*
* Allocates a legacy irq_domain if irq_base is positive or a linear
* domain otherwise. For the legacy domain, IRQ descriptors will also
* be allocated.
* Allocates an irq_domain, and optionally if first_irq is positive then also
* allocate irq_descs and map all of the hwirqs to virqs starting at first_irq.
*
* This is intended to implement the expected behaviour for most
* interrupt controllers which is that a linear mapping should
* normally be used unless the system requires a legacy mapping in
* order to support supplying interrupt numbers during non-DT
* registration of devices.
* interrupt controllers. If device tree is used, then first_irq will be 0 and
* irqs get mapped dynamically on the fly. However, if the controller requires
* static virq assignments (non-DT boot) then it will set that up correctly.
*/
struct irq_domain *irq_domain_add_simple(struct device_node *of_node,
unsigned int size,
......@@ -130,33 +124,25 @@ struct irq_domain *irq_domain_add_simple(struct device_node *of_node,
const struct irq_domain_ops *ops,
void *host_data)
{
if (first_irq > 0) {
int irq_base;
struct irq_domain *domain;
domain = __irq_domain_add(of_node, size, 0, ops, host_data);
if (!domain)
return NULL;
if (first_irq > 0) {
if (IS_ENABLED(CONFIG_SPARSE_IRQ)) {
/*
* Set the descriptor allocator to search for a
* 1-to-1 mapping, such as irq_alloc_desc_at().
* Use of_node_to_nid() which is defined to
* numa_node_id() on platforms that have no custom
* implementation.
*/
irq_base = irq_alloc_descs(first_irq, first_irq, size,
of_node_to_nid(of_node));
if (irq_base < 0) {
/* attempt to allocated irq_descs */
int rc = irq_alloc_descs(first_irq, first_irq, size,
of_node_to_nid(of_node));
if (rc < 0)
pr_info("Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n",
first_irq);
irq_base = first_irq;
}
} else
irq_base = first_irq;
return irq_domain_add_legacy(of_node, size, irq_base, 0,
ops, host_data);
}
WARN_ON(irq_domain_associate_many(domain, first_irq, 0, size));
}
/* A linear domain is the default */
return irq_domain_add_linear(of_node, size, ops, host_data);
return domain;
}
EXPORT_SYMBOL_GPL(irq_domain_add_simple);
......@@ -184,11 +170,7 @@ struct irq_domain *irq_domain_add_legacy(struct device_node *of_node,
{
struct irq_domain *domain;
pr_debug("Setting up legacy domain virq[%i:%i] ==> hwirq[%i:%i]\n",
first_irq, first_irq + size - 1,
(int)first_hwirq, (int)first_hwirq + size -1);
domain = irq_domain_add_linear(of_node, first_hwirq + size, ops, host_data);
domain = __irq_domain_add(of_node, first_hwirq + size, 0, ops, host_data);
if (!domain)
return NULL;
......@@ -198,43 +180,6 @@ struct irq_domain *irq_domain_add_legacy(struct device_node *of_node,
}
EXPORT_SYMBOL_GPL(irq_domain_add_legacy);
/**
* irq_domain_add_linear() - Allocate and register a linear revmap irq_domain.
* @of_node: pointer to interrupt controller's device tree node.
* @size: Number of interrupts in the domain.
* @ops: map/unmap domain callbacks
* @host_data: Controller private data pointer
*/
struct irq_domain *irq_domain_add_linear(struct device_node *of_node,
unsigned int size,
const struct irq_domain_ops *ops,
void *host_data)
{
struct irq_domain *domain;
domain = irq_domain_alloc(of_node, size, ops, host_data);
if (!domain)
return NULL;
irq_domain_add(domain);
return domain;
}
EXPORT_SYMBOL_GPL(irq_domain_add_linear);
struct irq_domain *irq_domain_add_nomap(struct device_node *of_node,
unsigned int max_irq,
const struct irq_domain_ops *ops,
void *host_data)
{
struct irq_domain *domain = irq_domain_alloc(of_node, 0, ops, host_data);
if (domain) {
domain->revmap_direct_max_irq = max_irq ? max_irq : ~0;
irq_domain_add(domain);
}
return domain;
}
EXPORT_SYMBOL_GPL(irq_domain_add_nomap);
/**
* irq_find_host() - Locates a domain for a given device node
* @node: device-tree node of the interrupt controller
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment