Commit fa78cc51 authored by Matt Porter's avatar Matt Porter Committed by Linus Torvalds

[PATCH] rapidio: core updates

Addresses issues raised with the 2.6.12-rc6-mm1 RIO support.  Fix dma_mask
init, shrink some code, general cleanup.
Signed-off-by: default avatarMatt Porter <mporter@kernel.crashing.org>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent eb188d0e
......@@ -15,6 +15,7 @@
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/init.h>
#include <linux/rio.h>
#include <linux/rio_drv.h>
......@@ -33,7 +34,8 @@ static LIST_HEAD(rio_switches);
static void rio_enum_timeout(unsigned long);
spinlock_t rio_global_list_lock = SPIN_LOCK_UNLOCKED;
DEFINE_SPINLOCK(rio_global_list_lock);
static int next_destid = 0;
static int next_switchid = 0;
static int next_net = 0;
......@@ -55,9 +57,6 @@ static int rio_sport_phys_table[] = {
-1,
};
extern struct rio_route_ops __start_rio_route_ops[];
extern struct rio_route_ops __end_rio_route_ops[];
/**
* rio_get_device_id - Get the base/extended device id for a device
* @port: RIO master port
......@@ -85,8 +84,7 @@ static u16 rio_get_device_id(struct rio_mport *port, u16 destid, u8 hopcount)
*
* Writes the base/extended device id from a device.
*/
static void
rio_set_device_id(struct rio_mport *port, u16 destid, u8 hopcount, u16 did)
static void rio_set_device_id(struct rio_mport *port, u16 destid, u8 hopcount, u16 did)
{
rio_mport_write_config_32(port, destid, hopcount, RIO_DID_CSR,
RIO_SET_DID(did));
......@@ -192,23 +190,9 @@ static int rio_enum_host(struct rio_mport *port)
static int rio_device_has_destid(struct rio_mport *port, int src_ops,
int dst_ops)
{
if (((src_ops & RIO_SRC_OPS_READ) ||
(src_ops & RIO_SRC_OPS_WRITE) ||
(src_ops & RIO_SRC_OPS_ATOMIC_TST_SWP) ||
(src_ops & RIO_SRC_OPS_ATOMIC_INC) ||
(src_ops & RIO_SRC_OPS_ATOMIC_DEC) ||
(src_ops & RIO_SRC_OPS_ATOMIC_SET) ||
(src_ops & RIO_SRC_OPS_ATOMIC_CLR)) &&
((dst_ops & RIO_DST_OPS_READ) ||
(dst_ops & RIO_DST_OPS_WRITE) ||
(dst_ops & RIO_DST_OPS_ATOMIC_TST_SWP) ||
(dst_ops & RIO_DST_OPS_ATOMIC_INC) ||
(dst_ops & RIO_DST_OPS_ATOMIC_DEC) ||
(dst_ops & RIO_DST_OPS_ATOMIC_SET) ||
(dst_ops & RIO_DST_OPS_ATOMIC_CLR))) {
return 1;
} else
return 0;
u32 mask = RIO_OPS_READ | RIO_OPS_WRITE | RIO_OPS_ATOMIC_TST_SWP | RIO_OPS_ATOMIC_INC | RIO_OPS_ATOMIC_DEC | RIO_OPS_ATOMIC_SET | RIO_OPS_ATOMIC_CLR;
return !!((src_ops | dst_ops) & mask);
}
/**
......@@ -383,8 +367,9 @@ static struct rio_dev *rio_setup_device(struct rio_net *net,
rdev->dev.release = rio_release_dev;
rio_dev_get(rdev);
rdev->dev.dma_mask = (u64 *) 0xffffffff;
rdev->dev.coherent_dma_mask = 0xffffffffULL;
rdev->dma_mask = DMA_32BIT_MASK;
rdev->dev.dma_mask = &rdev->dma_mask;
rdev->dev.coherent_dma_mask = DMA_32BIT_MASK;
if ((rdev->pef & RIO_PEF_INB_DOORBELL) &&
(rdev->dst_ops & RIO_DST_OPS_DOORBELL))
......
......@@ -26,6 +26,9 @@ extern int rio_disc_mport(struct rio_mport *mport);
extern struct device_attribute rio_dev_attrs[];
extern spinlock_t rio_global_list_lock;
extern struct rio_route_ops __start_rio_route_ops[];
extern struct rio_route_ops __end_rio_route_ops[];
/* Helpers internal to the RIO core code */
#define DECLARE_RIO_ROUTE_SECTION(section, vid, did, add_hook, get_hook) \
static struct rio_route_ops __rio_route_ops __attribute_used__ \
......
......@@ -91,6 +91,7 @@ struct rio_mport;
* @swpinfo: Switch port info
* @src_ops: Source operation capabilities
* @dst_ops: Destination operation capabilities
* @dma_mask: Mask of bits of RIO address this device implements
* @rswitch: Pointer to &struct rio_switch if valid for this device
* @driver: Driver claiming this device
* @dev: Device model device
......@@ -112,6 +113,7 @@ struct rio_dev {
u32 swpinfo; /* Only used for switches */
u32 src_ops;
u32 dst_ops;
u64 dma_mask;
struct rio_switch *rswitch; /* RIO switch info */
struct rio_driver *driver; /* RIO driver claiming this device */
struct device dev; /* LDM device structure */
......
......@@ -78,6 +78,19 @@
#define RIO_DST_OPS_ATOMIC_CLR 0x00000010 /* [I] Atomic clr op */
#define RIO_DST_OPS_PORT_WRITE 0x00000004 /* [I] Port-write op */
#define RIO_OPS_READ 0x00008000 /* [I] Read op */
#define RIO_OPS_WRITE 0x00004000 /* [I] Write op */
#define RIO_OPS_STREAM_WRITE 0x00002000 /* [I] Str-write op */
#define RIO_OPS_WRITE_RESPONSE 0x00001000 /* [I] Write/resp op */
#define RIO_OPS_DATA_MSG 0x00000800 /* [II] Data msg op */
#define RIO_OPS_DOORBELL 0x00000400 /* [II] Doorbell op */
#define RIO_OPS_ATOMIC_TST_SWP 0x00000100 /* [I] Atomic TAS op */
#define RIO_OPS_ATOMIC_INC 0x00000080 /* [I] Atomic inc op */
#define RIO_OPS_ATOMIC_DEC 0x00000040 /* [I] Atomic dec op */
#define RIO_OPS_ATOMIC_SET 0x00000020 /* [I] Atomic set op */
#define RIO_OPS_ATOMIC_CLR 0x00000010 /* [I] Atomic clr op */
#define RIO_OPS_PORT_WRITE 0x00000004 /* [I] Port-write op */
/* 0x20-0x3c *//* Reserved */
#define RIO_MBOX_CSR 0x40 /* [II] Mailbox CSR */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment