clk: qcom: mmcc-msm8998: Add hardware clockgating registers to some clks

Hardware clock gating is supported on some of the clocks declared in
there: ignoring that it does exist may lead to unstabilities on some
firmwares.
Add the HWCG registers where applicable to stop potential crashes.

This was verified on a smartphone shipped with a recent MSM8998
firmware, which will experience random crashes without this change.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210114221059.483390-9-angelogioacchino.delregno@somainline.orgSigned-off-by: Stephen Boyd <sboyd@kernel.org>

drivers/clk/qcom/mmcc-msm8998.c

@@ -1211,6 +1211,8 @@ static struct clk_rcg2 vfe1_clk_src = {
 
 static struct clk_branch misc_ahb_clk = {
 	.halt_reg = 0x328,
+	.hwcg_reg = 0x328,
+	.hwcg_bit = 1,
 	.clkr = {
 		.enable_reg = 0x328,
 		.enable_mask = BIT(0),
@@ -1241,6 +1243,8 @@ static struct clk_branch video_core_clk = {
 
 static struct clk_branch video_ahb_clk = {
 	.halt_reg = 0x1030,
+	.hwcg_reg = 0x1030,
+	.hwcg_bit = 1,
 	.clkr = {
 		.enable_reg = 0x1030,
 		.enable_mask = BIT(0),
@@ -1315,6 +1319,8 @@ static struct clk_branch video_subcore1_clk = {
 
 static struct clk_branch mdss_ahb_clk = {
 	.halt_reg = 0x2308,
+	.hwcg_reg = 0x2308,
+	.hwcg_bit = 1,
 	.clkr = {
 		.enable_reg = 0x2308,
 		.enable_mask = BIT(0),
@@ -2496,6 +2502,8 @@ static struct clk_branch mnoc_ahb_clk = {
 
 static struct clk_branch bimc_smmu_ahb_clk = {
 	.halt_reg = 0xe004,
+	.hwcg_reg = 0xe004,
+	.hwcg_bit = 1,
 	.clkr = {
 		.enable_reg = 0xe004,
 		.enable_mask = BIT(0),
@@ -2511,6 +2519,8 @@ static struct clk_branch bimc_smmu_ahb_clk = {
 
 static struct clk_branch bimc_smmu_axi_clk = {
 	.halt_reg = 0xe008,
+	.hwcg_reg = 0xe008,
+	.hwcg_bit = 1,
 	.clkr = {
 		.enable_reg = 0xe008,
 		.enable_mask = BIT(0),