Commit faecfb17 authored by Manu Abraham's avatar Manu Abraham Committed by Mauro Carvalho Chehab

V4L/DVB (3539): Move bttv fragments to bt8xx/

Signed-off-by: default avatarManu Abraham <manu@linuxtv.org>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@infradead.org>
parent 280323dd
...@@ -16,31 +16,7 @@ config VIDEO_ADV_DEBUG ...@@ -16,31 +16,7 @@ config VIDEO_ADV_DEBUG
V4L devices. V4L devices.
In doubt, say N. In doubt, say N.
config VIDEO_BT848 source "drivers/media/video/bt8xx/Kconfig"
tristate "BT848 Video For Linux"
depends on VIDEO_DEV && PCI && I2C
select I2C_ALGOBIT
select FW_LOADER
select VIDEO_BTCX
select VIDEO_BUF
select VIDEO_IR
select VIDEO_TUNER
select VIDEO_TVEEPROM
select VIDEO_MSP3400
---help---
Support for BT848 based frame grabber/overlay boards. This includes
the Miro, Hauppauge and STB boards. Please read the material in
<file:Documentation/video4linux/bttv/> for more information.
To compile this driver as a module, choose M here: the
module will be called bttv.
config VIDEO_BT848_DVB
bool "DVB/ATSC Support for bt878 based TV cards"
depends on VIDEO_BT848 && DVB_CORE
select DVB_BT8XX
---help---
This adds support for DVB/ATSC cards based on the BT878 chip.
config VIDEO_SAA6588 config VIDEO_SAA6588
tristate "SAA6588 Radio Chip RDS decoder support on BT848 cards" tristate "SAA6588 Radio Chip RDS decoder support on BT848 cards"
......
...@@ -2,9 +2,6 @@ ...@@ -2,9 +2,6 @@
# Makefile for the video capture/playback device drivers. # Makefile for the video capture/playback device drivers.
# #
bttv-objs := bttv-driver.o bttv-cards.o bttv-if.o \
bttv-risc.o bttv-vbi.o bttv-i2c.o bttv-gpio.o \
bttv-input.o
zoran-objs := zr36120.o zr36120_i2c.o zr36120_mem.o zoran-objs := zr36120.o zr36120_i2c.o zr36120_mem.o
zr36067-objs := zoran_procfs.o zoran_device.o \ zr36067-objs := zoran_procfs.o zoran_device.o \
zoran_driver.o zoran_card.o zoran_driver.o zoran_card.o
...@@ -15,8 +12,8 @@ msp3400-objs := msp3400-driver.o msp3400-kthreads.o ...@@ -15,8 +12,8 @@ msp3400-objs := msp3400-driver.o msp3400-kthreads.o
obj-$(CONFIG_VIDEO_DEV) += videodev.o v4l2-common.o v4l1-compat.o compat_ioctl32.o obj-$(CONFIG_VIDEO_DEV) += videodev.o v4l2-common.o v4l1-compat.o compat_ioctl32.o
obj-$(CONFIG_VIDEO_BT848) += bttv.o tvaudio.o \ obj-$(CONFIG_VIDEO_BT848) += bt8xx/
tda7432.o tda9875.o ir-kbd-i2c.o obj-$(CONFIG_VIDEO_BT848) += tvaudio.o tda7432.o tda9875.o ir-kbd-i2c.o
obj-$(CONFIG_SOUND_TVMIXER) += tvmixer.o obj-$(CONFIG_SOUND_TVMIXER) += tvmixer.o
obj-$(CONFIG_VIDEO_ZR36120) += zoran.o obj-$(CONFIG_VIDEO_ZR36120) += zoran.o
......
config VIDEO_BT848
tristate "BT848 Video For Linux"
depends on VIDEO_DEV && PCI && I2C
select I2C_ALGOBIT
select FW_LOADER
select VIDEO_BTCX
select VIDEO_BUF
select VIDEO_IR
select VIDEO_TUNER
select VIDEO_TVEEPROM
select VIDEO_MSP3400
---help---
Support for BT848 based frame grabber/overlay boards. This includes
the Miro, Hauppauge and STB boards. Please read the material in
<file:Documentation/video4linux/bttv/> for more information.
To compile this driver as a module, choose M here: the
module will be called bttv.
config VIDEO_BT848_DVB
bool "DVB/ATSC Support for bt878 based TV cards"
depends on VIDEO_BT848 && DVB_CORE
select DVB_BT8XX
---help---
This adds support for DVB/ATSC cards based on the BT878 chip.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment