Commit fb12b6c7 authored by Irina Tirdea's avatar Irina Tirdea Committed by Jonathan Cameron

iio: remove gpio interrupt probing from drivers that use a single interrupt

Commit 845c8770 ("i2c / ACPI: Assign IRQ for devices that have
GpioInt automatically") automatically assigns the first ACPI GPIO
interrupt in client->irq, so we can remove the probing code from
drivers that use only one interrupt.

Commit 0f079650 ("iio: remove gpio interrupt probing from drivers
that use a single interrupt") removes gpio interrupt probing from most
drivers. This patch cleans the remaining ones.
Signed-off-by: default avatarIrina Tirdea <irina.tirdea@intel.com>
Signed-off-by: default avatarJonathan Cameron <jic23@kernel.org>
parent b1532909
......@@ -17,7 +17,6 @@
#include <linux/i2c.h>
#include <linux/iio/iio.h>
#include <linux/acpi.h>
#include <linux/gpio/consumer.h>
#include <linux/regmap.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/trigger.h>
......@@ -380,31 +379,6 @@ static const struct iio_trigger_ops mxc4005_trigger_ops = {
.owner = THIS_MODULE,
};
static int mxc4005_gpio_probe(struct i2c_client *client,
struct mxc4005_data *data)
{
struct device *dev;
struct gpio_desc *gpio;
int ret;
if (!client)
return -EINVAL;
dev = &client->dev;
gpio = devm_gpiod_get_index(dev, "mxc4005_int", 0, GPIOD_IN);
if (IS_ERR(gpio)) {
dev_err(dev, "failed to get acpi gpio index\n");
return PTR_ERR(gpio);
}
ret = gpiod_to_irq(gpio);
dev_dbg(dev, "GPIO resource, no:%d irq:%d\n", desc_to_gpio(gpio), ret);
return ret;
}
static int mxc4005_chip_init(struct mxc4005_data *data)
{
int ret;
......@@ -470,9 +444,6 @@ static int mxc4005_probe(struct i2c_client *client,
return ret;
}
if (client->irq < 0)
client->irq = mxc4005_gpio_probe(client, data);
if (client->irq > 0) {
data->dready_trig = devm_iio_trigger_alloc(&client->dev,
"%s-dev%d",
......
......@@ -17,7 +17,6 @@
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/acpi.h>
#include <linux/gpio/consumer.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
#include <linux/iio/iio.h>
......@@ -31,7 +30,6 @@
#include "bmg160.h"
#define BMG160_IRQ_NAME "bmg160_event"
#define BMG160_GPIO_NAME "gpio_int"
#define BMG160_REG_CHIP_ID 0x00
#define BMG160_CHIP_ID_VAL 0x0F
......@@ -954,29 +952,6 @@ static const struct iio_buffer_setup_ops bmg160_buffer_setup_ops = {
.postdisable = bmg160_buffer_postdisable,
};
static int bmg160_gpio_probe(struct bmg160_data *data)
{
struct device *dev;
struct gpio_desc *gpio;
dev = data->dev;
/* data ready gpio interrupt pin */
gpio = devm_gpiod_get_index(dev, BMG160_GPIO_NAME, 0, GPIOD_IN);
if (IS_ERR(gpio)) {
dev_err(dev, "acpi gpio get index failed\n");
return PTR_ERR(gpio);
}
data->irq = gpiod_to_irq(gpio);
dev_dbg(dev, "GPIO resource, no:%d irq:%d\n", desc_to_gpio(gpio),
data->irq);
return 0;
}
static const char *bmg160_match_acpi_device(struct device *dev)
{
const struct acpi_device_id *id;
......@@ -1022,9 +997,6 @@ int bmg160_core_probe(struct device *dev, struct regmap *regmap, int irq,
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &bmg160_info;
if (data->irq <= 0)
bmg160_gpio_probe(data);
if (data->irq > 0) {
ret = devm_request_threaded_irq(dev,
data->irq,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment