Commit fb85205a authored by Sergey Matyukevich's avatar Sergey Matyukevich Committed by Russell King

ARM: 5631/1: Platform data for CF/IDE support in AT91SAM9260

This patch adds platform data for CF/IDE support
and SMC init code for AT91SAM9260 SoC.
Tested-by: default avatarSergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: default avatarSergey Matyukevich <geomatsi@gmail.com>
Acked-by: default avatarAndrew Victor <linux@maxim.org.za>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent 10233a93
...@@ -1113,6 +1113,122 @@ void __init at91_set_serial_console(unsigned portnr) {} ...@@ -1113,6 +1113,122 @@ void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {} void __init at91_add_device_serial(void) {}
#endif #endif
/* --------------------------------------------------------------------
* CF/IDE
* -------------------------------------------------------------------- */
#if defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE) || \
defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \
defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
static struct at91_cf_data cf0_data;
static struct resource cf0_resources[] = {
[0] = {
.start = AT91_CHIPSELECT_4,
.end = AT91_CHIPSELECT_4 + SZ_256M - 1,
.flags = IORESOURCE_MEM,
}
};
static struct platform_device cf0_device = {
.id = 0,
.dev = {
.platform_data = &cf0_data,
},
.resource = cf0_resources,
.num_resources = ARRAY_SIZE(cf0_resources),
};
static struct at91_cf_data cf1_data;
static struct resource cf1_resources[] = {
[0] = {
.start = AT91_CHIPSELECT_5,
.end = AT91_CHIPSELECT_5 + SZ_256M - 1,
.flags = IORESOURCE_MEM,
}
};
static struct platform_device cf1_device = {
.id = 1,
.dev = {
.platform_data = &cf1_data,
},
.resource = cf1_resources,
.num_resources = ARRAY_SIZE(cf1_resources),
};
void __init at91_add_device_cf(struct at91_cf_data *data)
{
struct platform_device *pdev;
unsigned long csa;
if (!data)
return;
csa = at91_sys_read(AT91_MATRIX_EBICSA);
switch (data->chipselect) {
case 4:
at91_set_multi_drive(AT91_PIN_PC8, 0);
at91_set_A_periph(AT91_PIN_PC8, 0);
csa |= AT91_MATRIX_CS4A_SMC_CF1;
cf0_data = *data;
pdev = &cf0_device;
break;
case 5:
at91_set_multi_drive(AT91_PIN_PC9, 0);
at91_set_A_periph(AT91_PIN_PC9, 0);
csa |= AT91_MATRIX_CS5A_SMC_CF2;
cf1_data = *data;
pdev = &cf1_device;
break;
default:
printk(KERN_ERR "AT91 CF: bad chip-select requested (%u)\n",
data->chipselect);
return;
}
at91_sys_write(AT91_MATRIX_EBICSA, csa);
if (data->rst_pin) {
at91_set_multi_drive(data->rst_pin, 0);
at91_set_gpio_output(data->rst_pin, 1);
}
if (data->irq_pin) {
at91_set_gpio_input(data->irq_pin, 0);
at91_set_deglitch(data->irq_pin, 1);
}
if (data->det_pin) {
at91_set_gpio_input(data->det_pin, 0);
at91_set_deglitch(data->det_pin, 1);
}
at91_set_B_periph(AT91_PIN_PC6, 0); /* CFCE1 */
at91_set_B_periph(AT91_PIN_PC7, 0); /* CFCE2 */
at91_set_A_periph(AT91_PIN_PC10, 0); /* CFRNW */
at91_set_A_periph(AT91_PIN_PC15, 1); /* NWAIT */
if (data->flags & AT91_CF_TRUE_IDE)
#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE)
pdev->name = "pata_at91";
#elif defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE)
pdev->name = "at91_ide";
#else
#warning "board requires AT91_CF_TRUE_IDE: enable either at91_ide or pata_at91"
#endif
else
pdev->name = "at91_cf";
platform_device_register(pdev);
}
#else
void __init at91_add_device_cf(struct at91_cf_data * data) {}
#endif
/* -------------------------------------------------------------------- */ /* -------------------------------------------------------------------- */
/* /*
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment