Skip to content

L
linux
Commit fb954c48 authored by Peter Griffin's avatar Peter Griffin Committed by Kishon Vijay Abraham I
Browse files
Options

phy: stih41x-usb: Remove usb phy driver and dt binding 

 documentation.

This phy is only used on STiH415/6 based silicon, and support for
these SoC's is being removed from the kernel.
Signed-off-by: default avatarPeter Griffin <peter.griffin@linaro.org>
Acked-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarKishon Vijay Abraham I <kishon@ti.com>
parent 4eb8eb1d
Hide whitespace changes
Inline Side-by-side
Showing with 0 additions and 197 deletions
drivers/phy/Kconfig
View file @ fb954c48
......@@ -428,14 +428,6 @@ config PHY_STIH407_USB
Enable this support to enable the picoPHY device used by USB2
and USB3 controllers on STMicroelectronics STiH407 SoC families.
config PHY_STIH41X_USB
tristate "STMicroelectronics USB2 PHY driver for STiH41x series"
depends on ARCH_STI
select GENERIC_PHY
help
Enable this to support the USB transceiver that is part of
STMicroelectronics STiH41x SoC series.
config PHY_QCOM_UFS
tristate "Qualcomm UFS PHY driver"
depends on OF && ARCH_QCOM
......
drivers/phy/Makefile
View file @ fb954c48
......@@ -49,7 +49,6 @@ obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o
obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o
obj-$(CONFIG_PHY_XGENE) += phy-xgene.o
obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o
obj-$(CONFIG_PHY_STIH41X_USB) += phy-stih41x-usb.o
obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o
obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o
obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o
......
drivers/phy/phy-stih41x-usb.c deleted 100644 → 0
View file @ 4eb8eb1d
/*
* Copyright (C) 2014 STMicroelectronics
*
* STMicroelectronics PHY driver for STiH41x USB.
*
* Author: Maxime Coquelin <maxime.coquelin@st.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2, as
* published by the Free Software Foundation.
*
*/
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/clk.h>
#include <linux/phy/phy.h>
#include <linux/regmap.h>
#include <linux/mfd/syscon.h>
#define SYSCFG332 0x80
#define SYSCFG2520 0x820
/**
* struct stih41x_usb_cfg - SoC specific PHY register mapping
* @syscfg: Offset in syscfg registers bank
* @cfg_mask: Bits mask for PHY configuration
* @cfg: Static configuration value for PHY
* @oscok: Notify the PHY oscillator clock is ready
* Setting this bit enable the PHY
*/
struct stih41x_usb_cfg {
u32 syscfg;
u32 cfg_mask;
u32 cfg;
u32 oscok;
};
/**
* struct stih41x_usb_phy - Private data for the PHY
* @dev: device for this controller
* @regmap: Syscfg registers bank in which PHY is configured
* @cfg: SoC specific PHY register mapping
* @clk: Oscillator used by the PHY
*/
struct stih41x_usb_phy {
struct device *dev;
struct regmap *regmap;
const struct stih41x_usb_cfg *cfg;
struct clk *clk;
};
static struct stih41x_usb_cfg stih415_usb_phy_cfg = {
.syscfg = SYSCFG332,
.cfg_mask = 0x3f,
.cfg = 0x38,
.oscok = BIT(6),
};
static struct stih41x_usb_cfg stih416_usb_phy_cfg = {
.syscfg = SYSCFG2520,
.cfg_mask = 0x33f,
.cfg = 0x238,
.oscok = BIT(6),
};
static int stih41x_usb_phy_init(struct phy *phy)
{
struct stih41x_usb_phy *phy_dev = phy_get_drvdata(phy);
return regmap_update_bits(phy_dev->regmap, phy_dev->cfg->syscfg,
phy_dev->cfg->cfg_mask, phy_dev->cfg->cfg);
}
static int stih41x_usb_phy_power_on(struct phy *phy)
{
struct stih41x_usb_phy *phy_dev = phy_get_drvdata(phy);
int ret;
ret = clk_prepare_enable(phy_dev->clk);
if (ret) {
dev_err(phy_dev->dev, "Failed to enable osc_phy clock\n");
return ret;
}
ret = regmap_update_bits(phy_dev->regmap, phy_dev->cfg->syscfg,
phy_dev->cfg->oscok, phy_dev->cfg->oscok);
if (ret)
clk_disable_unprepare(phy_dev->clk);
return ret;
}
static int stih41x_usb_phy_power_off(struct phy *phy)
{
struct stih41x_usb_phy *phy_dev = phy_get_drvdata(phy);
int ret;
ret = regmap_update_bits(phy_dev->regmap, phy_dev->cfg->syscfg,
phy_dev->cfg->oscok, 0);
if (ret) {
dev_err(phy_dev->dev, "Failed to clear oscok bit\n");
return ret;
}
clk_disable_unprepare(phy_dev->clk);
return 0;
}
static const struct phy_ops stih41x_usb_phy_ops = {
.init = stih41x_usb_phy_init,
.power_on = stih41x_usb_phy_power_on,
.power_off = stih41x_usb_phy_power_off,
.owner = THIS_MODULE,
};
static const struct of_device_id stih41x_usb_phy_of_match[];
static int stih41x_usb_phy_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
const struct of_device_id *match;
struct stih41x_usb_phy *phy_dev;
struct device *dev = &pdev->dev;
struct phy_provider *phy_provider;
struct phy *phy;
phy_dev = devm_kzalloc(dev, sizeof(*phy_dev), GFP_KERNEL);
if (!phy_dev)
return -ENOMEM;
match = of_match_device(stih41x_usb_phy_of_match, &pdev->dev);
if (!match)
return -ENODEV;
phy_dev->cfg = match->data;
phy_dev->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg");
if (IS_ERR(phy_dev->regmap)) {
dev_err(dev, "No syscfg phandle specified\n");
return PTR_ERR(phy_dev->regmap);
}
phy_dev->clk = devm_clk_get(dev, "osc_phy");
if (IS_ERR(phy_dev->clk)) {
dev_err(dev, "osc_phy clk not found\n");
return PTR_ERR(phy_dev->clk);
}
phy = devm_phy_create(dev, NULL, &stih41x_usb_phy_ops);
if (IS_ERR(phy)) {
dev_err(dev, "failed to create phy\n");
return PTR_ERR(phy);
}
phy_dev->dev = dev;
phy_set_drvdata(phy, phy_dev);
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
return PTR_ERR_OR_ZERO(phy_provider);
}
static const struct of_device_id stih41x_usb_phy_of_match[] = {
{ .compatible = "st,stih415-usb-phy", .data = &stih415_usb_phy_cfg },
{ .compatible = "st,stih416-usb-phy", .data = &stih416_usb_phy_cfg },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, stih41x_usb_phy_of_match);
static struct platform_driver stih41x_usb_phy_driver = {
.probe = stih41x_usb_phy_probe,
.driver = {
.name = "stih41x-usb-phy",
.of_match_table = stih41x_usb_phy_of_match,
}
};
module_platform_driver(stih41x_usb_phy_driver);
MODULE_AUTHOR("Maxime Coquelin <maxime.coquelin@st.com>");
MODULE_DESCRIPTION("STMicroelectronics USB PHY driver for STiH41x series");
MODULE_LICENSE("GPL v2");
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7