Commit fc0f8e25 authored by Sonika Jindal's avatar Sonika Jindal Committed by Daniel Vetter

drm/i915/skl: Read sink supported rates from edp panel

v2: Using DP_SUPPORTED_LINK_RATES macro for supported_rates array (Satheesh).
v3: Reading dpcd's supported link rates tables based upon edp version in the
same patch.
v4: Move version check under is_edp (Satheesh)
v5: Using le16 for rates, some naming, and removing nested if block (Ville)
v6: Correctly using DP_MAX_SUPPORTED_RATES and removing DP_SUPPORTED_LINK_RATES
(Ville)
v7: Incorrectly removed DP_SUPPORTED_LINK_RATES in v6, re-adding it
v8: Checking return value of intel_dp_dpcd_read_wake() (Ville)
Reviewed-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: default avatarSonika Jindal <sonika.jindal@intel.com>
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
parent dbef0f15
......@@ -1117,6 +1117,33 @@ hsw_dp_set_ddi_pll_sel(struct intel_crtc_state *pipe_config, int link_bw)
}
}
static int
intel_read_sink_rates(struct intel_dp *intel_dp, uint32_t *sink_rates)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
int i = 0;
uint16_t val;
if (INTEL_INFO(dev)->gen >= 9 && intel_dp->supported_rates[0]) {
/*
* Receiver supports only main-link rate selection by
* link rate table method, so read link rates from
* supported_link_rates
*/
for (i = 0; i < DP_MAX_SUPPORTED_RATES; ++i) {
val = le16_to_cpu(intel_dp->supported_rates[i]);
if (val == 0)
break;
sink_rates[i] = val * 200;
}
if (i <= 0)
DRM_ERROR("No rates in SUPPORTED_LINK_RATES");
}
return i;
}
static void
intel_dp_set_clock(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config, int link_bw)
......@@ -3578,6 +3605,7 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
uint8_t rev;
if (intel_dp_dpcd_read_wake(&intel_dp->aux, 0x000, intel_dp->dpcd,
sizeof(intel_dp->dpcd)) < 0)
......@@ -3609,6 +3637,16 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)
} else
intel_dp->use_tps3 = false;
/* Intermediate frequency support */
if (is_edp(intel_dp) &&
(intel_dp->dpcd[DP_EDP_CONFIGURATION_CAP] & DP_DPCD_DISPLAY_CONTROL_CAPABLE) &&
(intel_dp_dpcd_read_wake(&intel_dp->aux, DP_EDP_DPCD_REV, &rev, 1) == 1) &&
(rev >= 0x03)) { /* eDp v1.4 or higher */
intel_dp_dpcd_read_wake(&intel_dp->aux,
DP_SUPPORTED_LINK_RATES,
intel_dp->supported_rates,
sizeof(intel_dp->supported_rates));
}
if (!(intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] &
DP_DWN_STRM_PORT_PRESENT))
return true; /* native DP sink */
......
......@@ -626,6 +626,7 @@ struct intel_dp {
uint8_t dpcd[DP_RECEIVER_CAP_SIZE];
uint8_t psr_dpcd[EDP_PSR_RECEIVER_CAP_SIZE];
uint8_t downstream_ports[DP_MAX_DOWNSTREAM_PORTS];
__le16 supported_rates[DP_MAX_SUPPORTED_RATES];
struct drm_dp_aux aux;
uint8_t train_set[4];
int panel_power_up_delay;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment