Merge tag 'renesas-soc-for-v3.12' of...

Merge tag 'renesas-soc-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

From Simon Horman:
Renesas ARM based SoC updates for v3.12

* Setup arch timer based on MD pins on r8a7790 SoC
* Thermal driver support for r8a7790 SoC
* Make arch timer optional for r8a7790 and r8a73a4 SoCs
* CMT10 clock event for r8a7790 and r8a73a4 SoCs
* Increased clock coverage for r8a73a4 SoC
* MMCIF DMA definitions for r8a7740 SoC
* Disconnect SMP code from clocks on emev2 SoC

* tag 'renesas-soc-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (49 commits)
  ARM: shmobile: Setup r8a7790 arch timer based on MD pins
  ARM: shmobile: Introduce r8a7790_read_mode_pins()
  ARM: shmobile: r8a7740: add MMCIF DMA definitions
  ARM: shmobile: Disconnect EMEV2 SMP code from clocks
  ARM: shmobile: Make r8a73a4 Arch timer optional
  ARM: shmobile: Add r8a73a4 CMT10 clock event
  ARM: shmobile: Make r8a7790 Arch timer optional
  ARM: shmobile: Add r8a7790 CMT00 clock event
  ARM: shmobile: Sort r8a7790 MSTP entries
  ARM: shmobile: r8a73a4: add clocks for I2C controllers
  ARM: shmobile: r8a73a4: add Z2 clock support
  ARM: shmobile: r8a73a4: safeguard against wrong clk_set_rate() uses
  ARM: shmobile: r8a73a4: implement CPU clock scaling for CPUFreq
  ARM: shmobile: r8a73a4: wait for completion when kicking the clock
  ARM: shmobile: r8a7790: add thermal driver support
  ARM: shmobile: r8a7790: add clocks for thermal
  ARM: shmobile: Add SMSC ethernet chip to KZM9D DT reference
  ARM: shmobile: KZM9D DT reference implementation
  ARM: shmobile: r8a7790: add MMCIF and SDHI DT templates
  ARM: shmobile: r8a73a4: add MMCIF and SDHI DT templates
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/boot/dts/Makefile

@@ -183,6 +183,7 @@ dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \
 	ccu9540.dtb
 dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb
 dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
+	emev2-kzm9d-reference.dtb \
 	r8a7740-armadillo800eva.dtb \
 	r8a7778-bockw.dtb \
 	r8a7740-armadillo800eva-reference.dtb \

arch/arm/boot/dts/emev2-kzm9d-reference.dts

+/*
+ * Device Tree Source for the KZM9D board
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+/dts-v1/;
+
+/include/ "emev2.dtsi"
+
+/ {
+	model = "EMEV2 KZM9D Board";
+	compatible = "renesas,kzm9d-reference", "renesas,emev2";
+
+	memory {
+		device_type = "memory";
+		reg = <0x40000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096";
+	};
+
+	reg_1p8v: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_3p3v: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	lan9220@20000000 {
+		compatible = "smsc,lan9220", "smsc,lan9115";
+		reg = <0x20000000 0x10000>;
+		phy-mode = "mii";
+		interrupt-parent = <&gpio0>;
+		interrupts = <1 1>;	/* active high */
+		reg-io-width = <4>;
+		smsc,irq-active-high;
+		smsc,irq-push-pull;
+		vddvario-supply = <&reg_1p8v>;
+		vdd33a-supply = <&reg_3p3v>;
+	};
+};

arch/arm/boot/dts/emev2-kzm9d.dts

@@ -21,6 +21,6 @@ memory {
 	};
 
 	chosen {
-		bootargs = "console=tty0 console=ttyS1,115200n81 earlyprintk=serial8250-em.1,115200n81 mem=128M@0x40000000 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096";
+		bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096";
 	};
 };

arch/arm/boot/dts/emev2.dtsi

@@ -14,6 +14,14 @@ / {
 	compatible = "renesas,emev2";
 	interrupt-parent = <&gic>;
 
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -67,4 +75,55 @@ uart@e1050000 {
 		reg = <0xe1050000 0x38>;
 		interrupts = <0 11 0>;
 	};
+
+	gpio0: gpio@e0050000 {
+		compatible = "renesas,em-gio";
+		reg = <0xe0050000 0x2c>, <0xe0050040 0x20>;
+		interrupts = <0 67 0>, <0 68 0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ngpios = <32>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+	gpio1: gpio@e0050080 {
+		compatible = "renesas,em-gio";
+		reg = <0xe0050080 0x2c>, <0xe00500c0 0x20>;
+		interrupts = <0 69 0>, <0 70 0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ngpios = <32>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+	gpio2: gpio@e0050100 {
+		compatible = "renesas,em-gio";
+		reg = <0xe0050100 0x2c>, <0xe0050140 0x20>;
+		interrupts = <0 71 0>, <0 72 0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ngpios = <32>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+	gpio3: gpio@e0050180 {
+		compatible = "renesas,em-gio";
+		reg = <0xe0050180 0x2c>, <0xe00501c0 0x20>;
+		interrupts = <0 73 0>, <0 74 0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ngpios = <32>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+	gpio4: gpio@e0050200 {
+		compatible = "renesas,em-gio";
+		reg = <0xe0050200 0x2c>, <0xe0050240 0x20>;
+		interrupts = <0 75 0>, <0 76 0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ngpios = <31>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
 };

arch/arm/boot/dts/r8a73a4-ape6evm.dts

@@ -50,3 +50,25 @@ ethernet@8000000 {
 		};
 	};
 };
+
+&i2c5 {
+	vdd_dvfs: max8973@1b {
+		compatible = "maxim,max8973";
+		reg = <0x1b>;
+
+		regulator-min-microvolt = <935000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_dvfs>;
+	operating-points = <
+		/* kHz  uV */
+		1950000 1115000
+		1462500  995000
+	>;
+	voltage-tolerance = <1>; /* 1% */
+};

arch/arm/boot/dts/r8a73a4.dtsi

@@ -85,4 +85,130 @@ thermal@e61f0000 {
 		interrupt-parent = <&gic>;
 		interrupts = <0 69 4>;
 	};
+
+	i2c0: i2c@e6500000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe6500000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 174 0x4>;
+	};
+
+	i2c1: i2c@e6510000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe6510000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 175 0x4>;
+	};
+
+	i2c2: i2c@e6520000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe6520000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 176 0x4>;
+	};
+
+	i2c3: i2c@e6530000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe6530000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 177 0x4>;
+	};
+
+	i2c4: i2c@e6540000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe6540000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 178 0x4>;
+	};
+
+	i2c5: i2c@e60b0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe60b0000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 179 0x4>;
+	};
+
+	i2c6: i2c@e6550000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe6550000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 184 0x4>;
+	};
+
+	i2c7: i2c@e6560000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe6560000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 185 0x4>;
+	};
+
+	i2c8: i2c@e6570000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe6570000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 173 0x4>;
+	};
+
+	mmcif0: mmcif@ee200000 {
+		compatible = "renesas,sh-mmcif";
+		reg = <0 0xee200000 0 0x80>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 169 0x4>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	mmcif1: mmcif@ee220000 {
+		compatible = "renesas,sh-mmcif";
+		reg = <0 0xee220000 0 0x80>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 170 0x4>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	sdhi0: sdhi@ee100000 {
+		compatible = "renesas,r8a73a4-sdhi";
+		reg = <0 0xee100000 0 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 165 4>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
+
+	sdhi1: sdhi@ee120000 {
+		compatible = "renesas,r8a73a4-sdhi";
+		reg = <0 0xee120000 0 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 166 4>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
+
+	sdhi2: sdhi@ee140000 {
+		compatible = "renesas,r8a73a4-sdhi";
+		reg = <0 0xee140000 0 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 167 4>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
 };

arch/arm/boot/dts/r8a7790.dtsi

@@ -54,4 +54,58 @@ irqc0: interrupt-controller@e61c0000 {
 		interrupt-parent = <&gic>;
 		interrupts = <0 0 4>, <0 1 4>, <0 2 4>,	<0 3 4>;
 	};
+
+	mmcif0: mmcif@ee200000 {
+		compatible = "renesas,sh-mmcif";
+		reg = <0 0xee200000 0 0x80>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 169 0x4>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	mmcif1: mmcif@ee220000 {
+		compatible = "renesas,sh-mmcif";
+		reg = <0 0xee220000 0 0x80>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 170 0x4>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	sdhi0: sdhi@ee100000 {
+		compatible = "renesas,r8a7790-sdhi";
+		reg = <0 0xee100000 0 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 165 4>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
+
+	sdhi1: sdhi@ee120000 {
+		compatible = "renesas,r8a7790-sdhi";
+		reg = <0 0xee120000 0 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 166 4>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
+
+	sdhi2: sdhi@ee140000 {
+		compatible = "renesas,r8a7790-sdhi";
+		reg = <0 0xee140000 0 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 167 4>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
+
+	sdhi3: sdhi@ee160000 {
+		compatible = "renesas,r8a7790-sdhi";
+		reg = <0 0xee160000 0 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 168 4>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
 };

arch/arm/mach-shmobile/Kconfig

@@ -23,9 +23,10 @@ config ARCH_R8A73A4
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_GIC
 	select CPU_V7
-	select HAVE_ARM_ARCH_TIMER
 	select SH_CLK_CPG
 	select RENESAS_IRQC
+	select ARCH_HAS_CPUFREQ
+	select ARCH_HAS_OPP
 
 config ARCH_R8A7740
 	bool "R-Mobile A1 (R8A77400)"
@@ -59,7 +60,6 @@ config ARCH_R8A7790
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_GIC
 	select CPU_V7
-	select HAVE_ARM_ARCH_TIMER
 	select SH_CLK_CPG
 	select RENESAS_IRQC
 
@@ -156,6 +156,18 @@ config MACH_KZM9D
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	select USE_OF
 
+config MACH_KZM9D_REFERENCE
+	bool "KZM9D board - Reference Device Tree Implementation"
+	depends on ARCH_EMEV2
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	select USE_OF
+	---help---
+	   Use reference implementation of KZM9D board support
+	   which makes a greater use of device tree at the expense
+	   of not supporting a number of devices.
+
+	   This is intended to aid developers
+
 config MACH_KZM9G
 	bool "KZM-A9-GT board"
 	depends on ARCH_SH73A0

arch/arm/mach-shmobile/Makefile

@@ -46,6 +46,7 @@ obj-$(CONFIG_MACH_LAGER)	+= board-lager.o
 obj-$(CONFIG_MACH_ARMADILLO800EVA)	+= board-armadillo800eva.o
 obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE)	+= board-armadillo800eva-reference.o
 obj-$(CONFIG_MACH_KZM9D)	+= board-kzm9d.o
+obj-$(CONFIG_MACH_KZM9D_REFERENCE)	+= board-kzm9d-reference.o
 obj-$(CONFIG_MACH_KZM9G)	+= board-kzm9g.o
 obj-$(CONFIG_MACH_KZM9G_REFERENCE)	+= board-kzm9g-reference.o
 

arch/arm/mach-shmobile/Makefile.boot

@@ -7,6 +7,7 @@ loadaddr-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += 0x40008000
 loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
 loadaddr-$(CONFIG_MACH_KOTA2) += 0x41008000
 loadaddr-$(CONFIG_MACH_KZM9D) += 0x40008000
+loadaddr-$(CONFIG_MACH_KZM9D_REFERENCE) += 0x40008000
 loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000
 loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000
 loadaddr-$(CONFIG_MACH_LAGER) += 0x40008000

arch/arm/mach-shmobile/board-ape6evm.c

@@ -20,7 +20,6 @@
 
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
-#include <linux/irqchip.h>
 #include <linux/kernel.h>
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_device.h>
@@ -102,7 +101,7 @@ static const char *ape6evm_boards_compat_dt[] __initdata = {
 };
 
 DT_MACHINE_START(APE6EVM_DT, "ape6evm")
-	.init_irq	= irqchip_init,
+	.init_early	= r8a73a4_init_delay,
 	.init_time	= shmobile_timer_init,
 	.init_machine	= ape6evm_add_standard_devices,
 	.dt_compat	= ape6evm_boards_compat_dt,

arch/arm/mach-shmobile/board-armadillo800eva.c

@@ -679,15 +679,6 @@ static struct platform_device vcc_sdhi1 = {
 };
 
 /* SDHI0 */
-/*
- * FIXME
- *
- * It use polling mode here, since
- * CD (= Card Detect) pin is not connected to SDHI0_CD.
- * We can use IRQ31 as card detect irq,
- * but it needs chattering removal operation
- */
-#define IRQ31	irq_pin(31)
 static struct sh_mobile_sdhi_info sdhi0_info = {
 	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
 	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,

arch/arm/mach-shmobile/board-kzm9d-reference.c

+/*
+ * kzm9d board support - Reference DT implementation
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+#include <mach/emev2.h>
+#include <mach/common.h>
+#include <asm/mach/arch.h>
+
+static void __init kzm9d_add_standard_devices(void)
+{
+	emev2_clock_init();
+
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char *kzm9d_boards_compat_dt[] __initdata = {
+	"renesas,kzm9d-reference",
+	NULL,
+};
+
+DT_MACHINE_START(KZM9D_DT, "kzm9d")
+	.smp		= smp_ops(emev2_smp_ops),
+	.map_io		= emev2_map_io,
+	.init_early	= emev2_init_delay,
+	.init_machine	= kzm9d_add_standard_devices,
+	.init_late	= shmobile_init_late,
+	.dt_compat	= kzm9d_boards_compat_dt,
+MACHINE_END

arch/arm/mach-shmobile/board-kzm9d.c

@@ -85,9 +85,7 @@ static const char *kzm9d_boards_compat_dt[] __initdata = {
 DT_MACHINE_START(KZM9D_DT, "kzm9d")
 	.smp		= smp_ops(emev2_smp_ops),
 	.map_io		= emev2_map_io,
-	.init_early	= emev2_add_early_devices,
-	.nr_irqs	= NR_IRQS_LEGACY,
-	.init_irq	= emev2_init_irq,
+	.init_early	= emev2_init_delay,
 	.init_machine	= kzm9d_add_standard_devices,
 	.init_late	= shmobile_init_late,
 	.dt_compat	= kzm9d_boards_compat_dt,

arch/arm/mach-shmobile/board-kzm9g-reference.c

@@ -24,7 +24,6 @@
 #include <linux/gpio.h>
 #include <linux/io.h>
 #include <linux/irq.h>
-#include <linux/irqchip.h>
 #include <linux/input.h>
 #include <linux/of_platform.h>
 #include <linux/pinctrl/machine.h>
@@ -99,7 +98,6 @@ DT_MACHINE_START(KZM9G_DT, "kzm9g-reference")
 	.map_io		= sh73a0_map_io,
 	.init_early	= sh73a0_init_delay,
 	.nr_irqs	= NR_IRQS_LEGACY,
-	.init_irq	= irqchip_init,
 	.init_machine	= kzm_init,
 	.init_time	= shmobile_timer_init,
 	.dt_compat	= kzm9g_boards_compat_dt,

arch/arm/mach-shmobile/board-lager.c

@@ -22,7 +22,6 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
-#include <linux/irqchip.h>
 #include <linux/kernel.h>
 #include <linux/leds.h>
 #include <linux/pinctrl/machine.h>
@@ -103,7 +102,7 @@ static const char *lager_boards_compat_dt[] __initdata = {
 };
 
 DT_MACHINE_START(LAGER_DT, "lager")
-	.init_irq	= irqchip_init,
+	.init_early	= r8a7790_init_delay,
 	.init_time	= r8a7790_timer_init,
 	.init_machine	= lager_add_standard_devices,
 	.dt_compat	= lager_boards_compat_dt,

arch/arm/mach-shmobile/clock-emev2.c

@@ -40,7 +40,6 @@
 #define USIB2SCLKDIV 0x65c
 #define USIB3SCLKDIV 0x660
 #define STI_CLKSEL 0x688
-#define SMU_GENERAL_REG0 0x7c0
 
 /* not pretty, but hey */
 static void __iomem *smu_base;
@@ -51,11 +50,6 @@ static void emev2_smu_write(unsigned long value, int offs)
 	iowrite32(value, smu_base + offs);
 }
 
-void emev2_set_boot_vector(unsigned long value)
-{
-	emev2_smu_write(value, SMU_GENERAL_REG0);
-}
-
 static struct clk_mapping smu_mapping = {
 	.phys	= EMEV2_SMU_BASE,
 	.len	= PAGE_SIZE,
@@ -205,23 +199,11 @@ static struct clk_lookup lookups[] = {
 void __init emev2_clock_init(void)
 {
 	int k, ret = 0;
-	static int is_setup;
-
-	/* yuck, this is ugly as hell, but the non-smp case of clocks
-	 * code is now designed to rely on ioremap() instead of static
-	 * entity maps. in the case of smp we need access to the SMU
-	 * register earlier than ioremap() is actually working without
-	 * any static maps. to enable SMP in ugly but with dynamic
-	 * mappings we have to call emev2_clock_init() from different
-	 * places depending on UP and SMP...
-	 */
-	if (is_setup++)
-		return;
 
 	smu_base = ioremap(EMEV2_SMU_BASE, PAGE_SIZE);
 	BUG_ON(!smu_base);
 
-	/* setup STI timer to run on 37.768 kHz and deassert reset */
+	/* setup STI timer to run on 32.768 kHz and deassert reset */
 	emev2_smu_write(0, STI_CLKSEL);
 	emev2_smu_write(1, STI_RSTCTRL);
 

arch/arm/mach-shmobile/clock-r8a73a4.c

@@ -30,10 +30,12 @@
 
 #define SMSTPCR2 0xe6150138
 #define SMSTPCR3 0xe615013c
+#define SMSTPCR4 0xe6150140
 #define SMSTPCR5 0xe6150144
 
 #define FRQCRA		0xE6150000
 #define FRQCRB		0xE6150004
+#define FRQCRC		0xE61500E0
 #define VCLKCR1		0xE6150008
 #define VCLKCR2		0xE615000C
 #define VCLKCR3		0xE615001C
@@ -52,6 +54,7 @@
 #define HSICKCR		0xE615026C
 #define M4CKCR		0xE6150098
 #define PLLECR		0xE61500D0
+#define PLL0CR		0xE61500D8
 #define PLL1CR		0xE6150028
 #define PLL2CR		0xE615002C
 #define PLL2SCR		0xE61501F4
@@ -177,6 +180,7 @@ static struct sh_clk_ops pll_clk_ops = {
 		.mapping	= &cpg_mapping,		\
 	}
 
+PLL_CLOCK(pll0_clk,  &main_clk,      pll_parent_main,      1, 20, PLL0CR,  0);
 PLL_CLOCK(pll1_clk,  &main_clk,      pll_parent_main,       1, 7, PLL1CR,  1);
 PLL_CLOCK(pll2_clk,  &main_div2_clk, pll_parent_main_extal, 3, 5, PLL2CR,  2);
 PLL_CLOCK(pll2s_clk, &main_div2_clk, pll_parent_main_extal, 3, 5, PLL2SCR, 4);
@@ -184,6 +188,157 @@ PLL_CLOCK(pll2h_clk, &main_div2_clk, pll_parent_main_extal, 3, 5, PLL2HCR, 5);
 
 SH_FIXED_RATIO_CLK(pll1_div2_clk,	pll1_clk,	div2);
 
+static atomic_t frqcr_lock;
+
+/* Several clocks need to access FRQCRB, have to lock */
+static bool frqcr_kick_check(struct clk *clk)
+{
+	return !(ioread32(CPG_MAP(FRQCRB)) & BIT(31));
+}
+
+static int frqcr_kick_do(struct clk *clk)
+{
+	int i;
+
+	/* set KICK bit in FRQCRB to update hardware setting, check success */
+	iowrite32(ioread32(CPG_MAP(FRQCRB)) | BIT(31), CPG_MAP(FRQCRB));
+	for (i = 1000; i; i--)
+		if (ioread32(CPG_MAP(FRQCRB)) & BIT(31))
+			cpu_relax();
+		else
+			return 0;
+
+	return -ETIMEDOUT;
+}
+
+static int zclk_set_rate(struct clk *clk, unsigned long rate)
+{
+	void __iomem *frqcrc;
+	int ret;
+	unsigned long step, p_rate;
+	u32 val;
+
+	if (!clk->parent || !__clk_get(clk->parent))
+		return -ENODEV;
+
+	if (!atomic_inc_and_test(&frqcr_lock) || !frqcr_kick_check(clk)) {
+		ret = -EBUSY;
+		goto done;
+	}
+
+	/*
+	 * Users are supposed to first call clk_set_rate() only with
+	 * clk_round_rate() results. So, we don't fix wrong rates here, but
+	 * guard against them anyway
+	 */
+
+	p_rate = clk_get_rate(clk->parent);
+	if (rate == p_rate) {
+		val = 0;
+	} else {
+		step = DIV_ROUND_CLOSEST(p_rate, 32);
+
+		if (rate > p_rate || rate < step) {
+			ret = -EINVAL;
+			goto done;
+		}
+
+		val = 32 - rate / step;
+	}
+
+	frqcrc = clk->mapped_reg + (FRQCRC - (u32)clk->enable_reg);
+
+	iowrite32((ioread32(frqcrc) & ~(clk->div_mask << clk->enable_bit)) |
+		  (val << clk->enable_bit), frqcrc);
+
+	ret = frqcr_kick_do(clk);
+
+done:
+	atomic_dec(&frqcr_lock);
+	__clk_put(clk->parent);
+	return ret;
+}
+
+static long zclk_round_rate(struct clk *clk, unsigned long rate)
+{
+	/*
+	 * theoretical rate = parent rate * multiplier / 32,
+	 * where 1 <= multiplier <= 32. Therefore we should do
+	 * multiplier = rate * 32 / parent rate
+	 * rounded rate = parent rate * multiplier / 32.
+	 * However, multiplication before division won't fit in 32 bits, so
+	 * we sacrifice some precision by first dividing and then multiplying.
+	 * To find the nearest divisor we calculate both and pick up the best
+	 * one. This avoids 64-bit arithmetics.
+	 */
+	unsigned long step, mul_min, mul_max, rate_min, rate_max;
+
+	rate_max = clk_get_rate(clk->parent);
+
+	/* output freq <= parent */
+	if (rate >= rate_max)
+		return rate_max;
+
+	step = DIV_ROUND_CLOSEST(rate_max, 32);
+	/* output freq >= parent / 32 */
+	if (step >= rate)
+		return step;
+
+	mul_min = rate / step;
+	mul_max = DIV_ROUND_UP(rate, step);
+	rate_min = step * mul_min;
+	if (mul_max == mul_min)
+		return rate_min;
+
+	rate_max = step * mul_max;
+
+	if (rate_max - rate <  rate - rate_min)
+		return rate_max;
+
+	return rate_min;
+}
+
+static unsigned long zclk_recalc(struct clk *clk)
+{
+	void __iomem *frqcrc = FRQCRC - (u32)clk->enable_reg + clk->mapped_reg;
+	unsigned int max = clk->div_mask + 1;
+	unsigned long val = ((ioread32(frqcrc) >> clk->enable_bit) &
+			     clk->div_mask);
+
+	return DIV_ROUND_CLOSEST(clk_get_rate(clk->parent), max) *
+		(max - val);
+}
+
+static struct sh_clk_ops zclk_ops = {
+	.recalc = zclk_recalc,
+	.set_rate = zclk_set_rate,
+	.round_rate = zclk_round_rate,
+};
+
+static struct clk z_clk = {
+	.parent = &pll0_clk,
+	.div_mask = 0x1f,
+	.enable_bit = 8,
+	/* We'll need to access FRQCRB and FRQCRC */
+	.enable_reg = (void __iomem *)FRQCRB,
+	.ops = &zclk_ops,
+};
+
+/*
+ * It seems only 1/2 divider is usable in manual mode. 1/2 / 2/3
+ * switching is only available in auto-DVFS mode
+ */
+SH_FIXED_RATIO_CLK(pll0_div2_clk,	pll0_clk,		div2);
+
+static struct clk z2_clk = {
+	.parent = &pll0_div2_clk,
+	.div_mask = 0x1f,
+	.enable_bit = 0,
+	/* We'll need to access FRQCRB and FRQCRC */
+	.enable_reg = (void __iomem *)FRQCRB,
+	.ops = &zclk_ops,
+};
+
 static struct clk *main_clks[] = {
 	&extalr_clk,
 	&extal1_clk,
@@ -195,22 +350,23 @@ static struct clk *main_clks[] = {
 	&main_div2_clk,
 	&fsiack_clk,
 	&fsibck_clk,
+	&pll0_clk,
 	&pll1_clk,
 	&pll1_div2_clk,
 	&pll2_clk,
 	&pll2s_clk,
 	&pll2h_clk,
+	&z_clk,
+	&pll0_div2_clk,
+	&z2_clk,
 };
 
 /* DIV4 */
 static void div4_kick(struct clk *clk)
 {
-	unsigned long value;
-
-	/* set KICK bit in FRQCRB to update hardware setting */
-	value = ioread32(CPG_MAP(FRQCRB));
-	value |= (1 << 31);
-	iowrite32(value, CPG_MAP(FRQCRB));
+	if (!WARN(!atomic_inc_and_test(&frqcr_lock), "FRQCR* lock broken!\n"))
+		frqcr_kick_do(clk);
+	atomic_dec(&frqcr_lock);
 }
 
 static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18, 24, 0, 36, 48, 10};
@@ -349,8 +505,10 @@ static struct clk div6_clks[DIV6_NR] = {
 /* MSTP */
 enum {
 	MSTP217, MSTP216, MSTP207, MSTP206, MSTP204, MSTP203,
-	MSTP315, MSTP314, MSTP313, MSTP312, MSTP305,
-	MSTP522,
+	MSTP329, MSTP323, MSTP318, MSTP317, MSTP316,
+	MSTP315, MSTP314, MSTP313, MSTP312, MSTP305, MSTP300,
+	MSTP411, MSTP410, MSTP409,
+	MSTP522, MSTP515,
 	MSTP_NR
 };
 
@@ -361,12 +519,22 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP207] = SH_CLK_MSTP32(&div6_clks[DIV6_MP],	SMSTPCR2, 7, 0), /* SCIFB1 */
 	[MSTP216] = SH_CLK_MSTP32(&div6_clks[DIV6_MP],	SMSTPCR2, 16, 0), /* SCIFB2 */
 	[MSTP217] = SH_CLK_MSTP32(&div6_clks[DIV6_MP],	SMSTPCR2, 17, 0), /* SCIFB3 */
+	[MSTP300] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 0, 0), /* IIC2 */
 	[MSTP305] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC1],SMSTPCR3, 5, 0), /* MMCIF1 */
 	[MSTP312] = SH_CLK_MSTP32(&div6_clks[DIV6_SDHI2],SMSTPCR3, 12, 0), /* SDHI2 */
 	[MSTP313] = SH_CLK_MSTP32(&div6_clks[DIV6_SDHI1],SMSTPCR3, 13, 0), /* SDHI1 */
 	[MSTP314] = SH_CLK_MSTP32(&div6_clks[DIV6_SDHI0],SMSTPCR3, 14, 0), /* SDHI0 */
 	[MSTP315] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC0],SMSTPCR3, 15, 0), /* MMCIF0 */
+	[MSTP316] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 16, 0), /* IIC6 */
+	[MSTP317] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 17, 0), /* IIC7 */
+	[MSTP318] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 18, 0), /* IIC0 */
+	[MSTP323] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 23, 0), /* IIC1 */
+	[MSTP329] = SH_CLK_MSTP32(&extalr_clk, SMSTPCR3, 29, 0), /* CMT10 */
+	[MSTP409] = SH_CLK_MSTP32(&main_div2_clk,	SMSTPCR4, 9, 0), /* IIC5 */
+	[MSTP410] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR4, 10, 0), /* IIC4 */
+	[MSTP411] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR4, 11, 0), /* IIC3 */
 	[MSTP522] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR5, 22, 0), /* Thermal */
+	[MSTP515] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR5, 15, 0), /* IIC8 */
 };
 
 static struct clk_lookup lookups[] = {
@@ -386,6 +554,9 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("pll2s",			&pll2s_clk),
 	CLKDEV_CON_ID("pll2h",			&pll2h_clk),
 
+	/* CPU clock */
+	CLKDEV_DEV_ID("cpufreq-cpu0",		&z_clk),
+
 	/* DIV6 */
 	CLKDEV_CON_ID("zb",			&div6_clks[DIV6_ZB]),
 	CLKDEV_CON_ID("vck1",			&div6_clks[DIV6_VCK1]),
@@ -408,6 +579,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]),
 	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP217]),
 	CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
+	CLKDEV_DEV_ID("e6520000.i2c", &mstp_clks[MSTP300]),
 	CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]),
 	CLKDEV_DEV_ID("ee220000.mmcif", &mstp_clks[MSTP305]),
 	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP312]),
@@ -418,6 +590,15 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("ee100000.sdhi", &mstp_clks[MSTP314]),
 	CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP315]),
 	CLKDEV_DEV_ID("ee200000.mmcif", &mstp_clks[MSTP315]),
+	CLKDEV_DEV_ID("e6550000.i2c", &mstp_clks[MSTP316]),
+	CLKDEV_DEV_ID("e6560000.i2c", &mstp_clks[MSTP317]),
+	CLKDEV_DEV_ID("e6500000.i2c", &mstp_clks[MSTP318]),
+	CLKDEV_DEV_ID("e6510000.i2c", &mstp_clks[MSTP323]),
+	CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]),
+	CLKDEV_DEV_ID("e60b0000.i2c", &mstp_clks[MSTP409]),
+	CLKDEV_DEV_ID("e6540000.i2c", &mstp_clks[MSTP410]),
+	CLKDEV_DEV_ID("e6530000.i2c", &mstp_clks[MSTP411]),
+	CLKDEV_DEV_ID("e6570000.i2c", &mstp_clks[MSTP515]),
 
 	/* for DT */
 	CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]),
@@ -429,6 +610,8 @@ void __init r8a73a4_clock_init(void)
 	int k, ret = 0;
 	u32 ckscr;
 
+	atomic_set(&frqcr_lock, -1);
+
 	reg = ioremap_nocache(CKSCR, PAGE_SIZE);
 	BUG_ON(!reg);
 	ckscr = ioread32(reg);

arch/arm/mach-shmobile/clock-r8a7790.c

@@ -24,6 +24,7 @@
 #include <linux/clkdev.h>
 #include <mach/clock.h>
 #include <mach/common.h>
+#include <mach/r8a7790.h>
 
 /*
  *   MD		EXTAL		PLL0	PLL1	PLL3
@@ -42,16 +43,15 @@
  *	see "p1 / 2" on R8A7790_CLOCK_ROOT() below
  */
 
-#define MD(nr)	(1 << nr)
-
 #define CPG_BASE 0xe6150000
 #define CPG_LEN 0x1000
 
+#define SMSTPCR1 0xe6150134
 #define SMSTPCR2 0xe6150138
 #define SMSTPCR3 0xe615013c
+#define SMSTPCR5 0xe6150144
 #define SMSTPCR7 0xe615014c
 
-#define MODEMR		0xE6160060
 #define SDCKCR		0xE6150074
 #define SD2CKCR		0xE6150078
 #define SD3CKCR		0xE615007C
@@ -182,14 +182,19 @@ static struct clk div6_clks[DIV6_NR] = {
 enum {
 	MSTP721, MSTP720,
 	MSTP717, MSTP716,
+	MSTP522,
 	MSTP315, MSTP314, MSTP313, MSTP312, MSTP311, MSTP305, MSTP304,
 	MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202,
+	MSTP124,
 	MSTP_NR
 };
 
 static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP721] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 21, 0), /* SCIF0 */
 	[MSTP720] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 20, 0), /* SCIF1 */
+	[MSTP717] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 17, 0), /* HSCIF0 */
+	[MSTP716] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 16, 0), /* HSCIF1 */
+	[MSTP522] = SH_CLK_MSTP32(&extal_clk, SMSTPCR5, 22, 0), /* Thermal */
 	[MSTP315] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC0], SMSTPCR3, 15, 0), /* MMC0 */
 	[MSTP314] = SH_CLK_MSTP32(&div4_clks[DIV4_SD0], SMSTPCR3, 14, 0), /* SDHI0 */
 	[MSTP313] = SH_CLK_MSTP32(&div4_clks[DIV4_SD1], SMSTPCR3, 13, 0), /* SDHI1 */
@@ -203,8 +208,7 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP204] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 4, 0), /* SCIFA0 */
 	[MSTP203] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 3, 0), /* SCIFA1 */
 	[MSTP202] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 2, 0), /* SCIFA2 */
-	[MSTP717] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 17, 0), /* HSCIF0 */
-	[MSTP716] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 16, 0), /* HSCIF1 */
+	[MSTP124] = SH_CLK_MSTP32(&rclk_clk, SMSTPCR1, 24, 0), /* CMT0 */
 };
 
 static struct clk_lookup lookups[] = {
@@ -254,6 +258,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP720]),
 	CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP717]),
 	CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP716]),
+	CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
 	CLKDEV_DEV_ID("ee200000.mmcif", &mstp_clks[MSTP315]),
 	CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP315]),
 	CLKDEV_DEV_ID("ee100000.sdhi", &mstp_clks[MSTP314]),
@@ -266,6 +271,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh_mobile_sdhi.3", &mstp_clks[MSTP311]),
 	CLKDEV_DEV_ID("ee220000.mmcif", &mstp_clks[MSTP305]),
 	CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]),
+	CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]),
 };
 
 #define R8A7790_CLOCK_ROOT(e, m, p0, p1, p30, p31)		\
@@ -280,14 +286,9 @@ static struct clk_lookup lookups[] = {
 
 void __init r8a7790_clock_init(void)
 {
-	void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE);
-	u32 mode;
+	u32 mode = r8a7790_read_mode_pins();
 	int k, ret = 0;
 
-	BUG_ON(!modemr);
-	mode = ioread32(modemr);
-	iounmap(modemr);
-
 	switch (mode & (MD(14) | MD(13))) {
 	case 0:
 		R8A7790_CLOCK_ROOT(15, &extal_clk, 172, 208, 106, 88);

arch/arm/mach-shmobile/include/mach/dma.h

-/* empty */

arch/arm/mach-shmobile/include/mach/emev2.h

@@ -2,11 +2,9 @@
 #define __ASM_EMEV2_H__
 
 extern void emev2_map_io(void);
-extern void emev2_init_irq(void);
-extern void emev2_add_early_devices(void);
+extern void emev2_init_delay(void);
 extern void emev2_add_standard_devices(void);
 extern void emev2_clock_init(void);
-extern void emev2_set_boot_vector(unsigned long value);
 
 #define EMEV2_GPIO_BASE 200
 #define EMEV2_GPIO_IRQ(n) (EMEV2_GPIO_BASE + (n))

arch/arm/mach-shmobile/include/mach/r8a73a4.h

@@ -4,5 +4,6 @@
 void r8a73a4_add_standard_devices(void);
 void r8a73a4_clock_init(void);
 void r8a73a4_pinmux_init(void);
+void r8a73a4_init_delay(void);
 
 #endif /* __ASM_R8A73A4_H__ */

arch/arm/mach-shmobile/include/mach/r8a7740.h

@@ -42,6 +42,8 @@ enum {
 	SHDMA_SLAVE_FSIB_TX,
 	SHDMA_SLAVE_USBHS_TX,
 	SHDMA_SLAVE_USBHS_RX,
+	SHDMA_SLAVE_MMCIF_TX,
+	SHDMA_SLAVE_MMCIF_RX,
 };
 
 extern void r8a7740_meram_workaround(void);

arch/arm/mach-shmobile/include/mach/r8a7778.h

@@ -33,7 +33,6 @@ extern void r8a7778_add_mmc_device(struct sh_mmcif_plat_data *info);
 
 extern void r8a7778_init_late(void);
 extern void r8a7778_init_delay(void);
-extern void r8a7778_init_irq(void);
 extern void r8a7778_init_irq_dt(void);
 extern void r8a7778_clock_init(void);
 extern void r8a7778_init_irq_extpin(int irlm);

arch/arm/mach-shmobile/include/mach/r8a7790.h

@@ -4,6 +4,10 @@
 void r8a7790_add_standard_devices(void);
 void r8a7790_clock_init(void);
 void r8a7790_pinmux_init(void);
+void r8a7790_init_delay(void);
 void r8a7790_timer_init(void);
 
+#define MD(nr) BIT(nr)
+u32 r8a7790_read_mode_pins(void);
+
 #endif /* __ASM_R8A7790_H__ */

arch/arm/mach-shmobile/setup-r8a73a4.c

@@ -18,11 +18,11 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include <linux/irq.h>
-#include <linux/irqchip.h>
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
 #include <linux/platform_data/irq-renesas-irqc.h>
 #include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
 #include <mach/common.h>
 #include <mach/irqs.h>
 #include <mach/r8a73a4.h>
@@ -169,6 +169,25 @@ static const struct resource thermal0_resources[] = {
 					thermal0_resources,		\
 					ARRAY_SIZE(thermal0_resources))
 
+static struct sh_timer_config cmt10_platform_data = {
+	.name = "CMT10",
+	.timer_bit = 0,
+	.clockevent_rating = 80,
+};
+
+static struct resource cmt10_resources[] = {
+	DEFINE_RES_MEM(0xe6130010, 0x0c),
+	DEFINE_RES_MEM(0xe6130000, 0x04),
+	DEFINE_RES_IRQ(gic_spi(120)), /* CMT1_0 */
+};
+
+#define r8a7790_register_cmt(idx)					\
+	platform_device_register_resndata(&platform_bus, "sh_cmt",	\
+					  idx, cmt##idx##_resources,	\
+					  ARRAY_SIZE(cmt##idx##_resources), \
+					  &cmt##idx##_platform_data,	\
+					  sizeof(struct sh_timer_config))
+
 void __init r8a73a4_add_standard_devices(void)
 {
 	r8a73a4_register_scif(SCIFA0);
@@ -180,11 +199,20 @@ void __init r8a73a4_add_standard_devices(void)
 	r8a73a4_register_irqc(0);
 	r8a73a4_register_irqc(1);
 	r8a73a4_register_thermal();
+	r8a7790_register_cmt(10);
+}
+
+void __init r8a73a4_init_delay(void)
+{
+#ifndef CONFIG_ARM_ARCH_TIMER
+	shmobile_setup_delay(1500, 2, 4); /* Cortex-A15 @ 1500MHz */
+#endif
 }
 
 #ifdef CONFIG_USE_OF
 void __init r8a73a4_add_standard_devices_dt(void)
 {
+	platform_device_register_simple("cpufreq-cpu0", -1, NULL, 0);
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
@@ -194,7 +222,7 @@ static const char *r8a73a4_boards_compat_dt[] __initdata = {
 };
 
 DT_MACHINE_START(R8A73A4_DT, "Generic R8A73A4 (Flattened Device Tree)")
-	.init_irq	= irqchip_init,
+	.init_early	= r8a73a4_init_delay,
 	.init_machine	= r8a73a4_add_standard_devices_dt,
 	.init_time	= shmobile_timer_init,
 	.dt_compat	= r8a73a4_boards_compat_dt,

arch/arm/mach-shmobile/setup-r8a7740.c

@@ -588,6 +588,16 @@ static const struct sh_dmae_slave_config r8a7740_dmae_slaves[] = {
 		.addr		= 0xfe1f0064,
 		.chcr		= CHCR_TX(XMIT_SZ_32BIT),
 		.mid_rid	= 0xb5,
+	}, {
+		.slave_id	= SHDMA_SLAVE_MMCIF_TX,
+		.addr		= 0xe6bd0034,
+		.chcr		= CHCR_TX(XMIT_SZ_32BIT),
+		.mid_rid	= 0xd1,
+	}, {
+		.slave_id	= SHDMA_SLAVE_MMCIF_RX,
+		.addr		= 0xe6bd0034,
+		.chcr		= CHCR_RX(XMIT_SZ_32BIT),
+		.mid_rid	= 0xd2,
 	},
 };
 
@@ -986,16 +996,22 @@ void __init r8a7740_add_early_devices(void)
 
 #ifdef CONFIG_USE_OF
 
-static const struct of_dev_auxdata r8a7740_auxdata_lookup[] __initconst = {
-	{ }
-};
+void __init r8a7740_add_early_devices_dt(void)
+{
+	shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */
+
+	early_platform_add_devices(r8a7740_early_devices,
+				   ARRAY_SIZE(r8a7740_early_devices));
+
+	/* setup early console here as well */
+	shmobile_setup_console();
+}
 
 void __init r8a7740_add_standard_devices_dt(void)
 {
 	platform_add_devices(r8a7740_devices_dt,
 			    ARRAY_SIZE(r8a7740_devices_dt));
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     r8a7740_auxdata_lookup, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 void __init r8a7740_init_delay(void)

arch/arm/mach-shmobile/setup-r8a7778.c

@@ -53,7 +53,7 @@
 	.irqs		= SCIx_IRQ_MUXED(irq),			\
 }
 
-static struct plat_sci_port scif_platform_data[] = {
+static struct plat_sci_port scif_platform_data[] __initdata = {
 	SCIF_INFO(0xffe40000, gic_iid(0x66)),
 	SCIF_INFO(0xffe41000, gic_iid(0x67)),
 	SCIF_INFO(0xffe42000, gic_iid(0x68)),
@@ -63,24 +63,24 @@ static struct plat_sci_port scif_platform_data[] = {
 };
 
 /* TMU */
-static struct resource sh_tmu0_resources[] = {
+static struct resource sh_tmu0_resources[] __initdata = {
 	DEFINE_RES_MEM(0xffd80008, 12),
 	DEFINE_RES_IRQ(gic_iid(0x40)),
 };
 
-static struct sh_timer_config sh_tmu0_platform_data = {
+static struct sh_timer_config sh_tmu0_platform_data __initdata = {
 	.name			= "TMU00",
 	.channel_offset		= 0x4,
 	.timer_bit		= 0,
 	.clockevent_rating	= 200,
 };
 
-static struct resource sh_tmu1_resources[] = {
+static struct resource sh_tmu1_resources[] __initdata = {
 	DEFINE_RES_MEM(0xffd80014, 12),
 	DEFINE_RES_IRQ(gic_iid(0x41)),
 };
 
-static struct sh_timer_config sh_tmu1_platform_data = {
+static struct sh_timer_config sh_tmu1_platform_data __initdata = {
 	.name			= "TMU01",
 	.channel_offset		= 0x10,
 	.timer_bit		= 1,
@@ -189,7 +189,7 @@ USB_PLATFORM_INFO(ehci);
 USB_PLATFORM_INFO(ohci);
 
 /* Ether */
-static struct resource ether_resources[] = {
+static struct resource ether_resources[] __initdata = {
 	DEFINE_RES_MEM(0xfde00000, 0x400),
 	DEFINE_RES_IRQ(gic_iid(0x89)),
 };
@@ -203,17 +203,17 @@ void __init r8a7778_add_ether_device(struct sh_eth_plat_data *pdata)
 }
 
 /* PFC/GPIO */
-static struct resource pfc_resources[] = {
+static struct resource pfc_resources[] __initdata = {
 	DEFINE_RES_MEM(0xfffc0000, 0x118),
 };
 
 #define R8A7778_GPIO(idx)						\
-static struct resource r8a7778_gpio##idx##_resources[] = {		\
+static struct resource r8a7778_gpio##idx##_resources[] __initdata = {	\
 	DEFINE_RES_MEM(0xffc40000 + 0x1000 * (idx), 0x30),		\
 	DEFINE_RES_IRQ(gic_iid(0x87)),					\
 };									\
 									\
-static struct gpio_rcar_config r8a7778_gpio##idx##_platform_data = {	\
+static struct gpio_rcar_config r8a7778_gpio##idx##_platform_data __initdata = { \
 	.gpio_base	= 32 * (idx),					\
 	.irq_base	= GPIO_IRQ_BASE(idx),				\
 	.number_of_pins	= 32,						\
@@ -249,7 +249,7 @@ void __init r8a7778_pinmux_init(void)
 };
 
 /* SDHI */
-static struct resource sdhi_resources[] = {
+static struct resource sdhi_resources[] __initdata = {
 	/* SDHI0 */
 	DEFINE_RES_MEM(0xFFE4C000, 0x100),
 	DEFINE_RES_IRQ(gic_iid(0x77)),
@@ -365,12 +365,12 @@ void __init r8a7778_init_late(void)
 	platform_device_register_full(&ohci_info);
 }
 
-static struct renesas_intc_irqpin_config irqpin_platform_data = {
+static struct renesas_intc_irqpin_config irqpin_platform_data __initdata = {
 	.irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */
 	.sense_bitfield_width = 2,
 };
 
-static struct resource irqpin_resources[] = {
+static struct resource irqpin_resources[] __initdata = {
 	DEFINE_RES_MEM(0xfe78001c, 4), /* ICR1 */
 	DEFINE_RES_MEM(0xfe780010, 4), /* INTPRI */
 	DEFINE_RES_MEM(0xfe780024, 4), /* INTREQ */
@@ -408,17 +408,25 @@ void __init r8a7778_init_irq_extpin(int irlm)
 			&irqpin_platform_data, sizeof(irqpin_platform_data));
 }
 
+void __init r8a7778_init_delay(void)
+{
+	shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */
+}
+
+#ifdef CONFIG_USE_OF
 #define INT2SMSKCR0	0x82288 /* 0xfe782288 */
 #define INT2SMSKCR1	0x8228c /* 0xfe78228c */
 
 #define INT2NTSR0	0x00018 /* 0xfe700018 */
 #define INT2NTSR1	0x0002c /* 0xfe70002c */
-static void __init r8a7778_init_irq_common(void)
+void __init r8a7778_init_irq_dt(void)
 {
 	void __iomem *base = ioremap_nocache(0xfe700000, 0x00100000);
 
 	BUG_ON(!base);
 
+	irqchip_init();
+
 	/* route all interrupts to ARM */
 	__raw_writel(0x73ffffff, base + INT2NTSR0);
 	__raw_writel(0xffffffff, base + INT2NTSR1);
@@ -430,43 +438,6 @@ static void __init r8a7778_init_irq_common(void)
 	iounmap(base);
 }
 
-void __init r8a7778_init_irq(void)
-{
-	void __iomem *gic_dist_base;
-	void __iomem *gic_cpu_base;
-
-	gic_dist_base = ioremap_nocache(0xfe438000, PAGE_SIZE);
-	gic_cpu_base  = ioremap_nocache(0xfe430000, PAGE_SIZE);
-	BUG_ON(!gic_dist_base || !gic_cpu_base);
-
-	/* use GIC to handle interrupts */
-	gic_init(0, 29, gic_dist_base, gic_cpu_base);
-
-	r8a7778_init_irq_common();
-}
-
-void __init r8a7778_init_delay(void)
-{
-	shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */
-}
-
-#ifdef CONFIG_USE_OF
-void __init r8a7778_init_irq_dt(void)
-{
-	irqchip_init();
-	r8a7778_init_irq_common();
-}
-
-static const struct of_dev_auxdata r8a7778_auxdata_lookup[] __initconst = {
-	{},
-};
-
-void __init r8a7778_add_standard_devices_dt(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     r8a7778_auxdata_lookup, NULL);
-}
-
 static const char *r8a7778_compat_dt[] __initdata = {
 	"renesas,r8a7778",
 	NULL,
@@ -475,7 +446,6 @@ static const char *r8a7778_compat_dt[] __initdata = {
 DT_MACHINE_START(R8A7778_DT, "Generic R8A7778 (Flattened Device Tree)")
 	.init_early	= r8a7778_init_delay,
 	.init_irq	= r8a7778_init_irq_dt,
-	.init_machine	= r8a7778_add_standard_devices_dt,
 	.init_time	= shmobile_timer_init,
 	.dt_compat	= r8a7778_compat_dt,
 	.init_late      = r8a7778_init_late,

arch/arm/mach-shmobile/setup-r8a7779.c

@@ -665,10 +665,6 @@ void __init r8a7779_init_delay(void)
 	shmobile_setup_delay(1000, 2, 4); /* Cortex-A9 @ 1000MHz */
 }
 
-static const struct of_dev_auxdata r8a7779_auxdata_lookup[] __initconst = {
-	{},
-};
-
 void __init r8a7779_add_standard_devices_dt(void)
 {
 	/* clocks are setup late during boot in the case of DT */
@@ -676,8 +672,7 @@ void __init r8a7779_add_standard_devices_dt(void)
 
 	platform_add_devices(r8a7779_devices_dt,
 			     ARRAY_SIZE(r8a7779_devices_dt));
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     r8a7779_auxdata_lookup, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static const char *r8a7779_compat_dt[] __initdata = {

arch/arm/mach-shmobile/setup-r8a7790.c

@@ -19,12 +19,12 @@
  */
 
 #include <linux/irq.h>
-#include <linux/irqchip.h>
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
-#include <linux/serial_sci.h>
 #include <linux/platform_data/gpio-rcar.h>
 #include <linux/platform_data/irq-renesas-irqc.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
 #include <mach/common.h>
 #include <mach/irqs.h>
 #include <mach/r8a7790.h>
@@ -149,6 +149,36 @@ static struct resource irqc0_resources[] __initdata = {
 					  &irqc##idx##_data,		\
 					  sizeof(struct renesas_irqc_config))
 
+static struct resource thermal_resources[] __initdata = {
+	DEFINE_RES_MEM(0xe61f0000, 0x14),
+	DEFINE_RES_MEM(0xe61f0100, 0x38),
+	DEFINE_RES_IRQ(gic_spi(69)),
+};
+
+#define r8a7790_register_thermal()					\
+	platform_device_register_simple("rcar_thermal", -1,		\
+					thermal_resources,		\
+					ARRAY_SIZE(thermal_resources))
+
+static struct sh_timer_config cmt00_platform_data = {
+	.name = "CMT00",
+	.timer_bit = 0,
+	.clockevent_rating = 80,
+};
+
+static struct resource cmt00_resources[] = {
+	DEFINE_RES_MEM(0xffca0510, 0x0c),
+	DEFINE_RES_MEM(0xffca0500, 0x04),
+	DEFINE_RES_IRQ(gic_spi(142)), /* CMT0_0 */
+};
+
+#define r8a7790_register_cmt(idx)					\
+	platform_device_register_resndata(&platform_bus, "sh_cmt",	\
+					  idx, cmt##idx##_resources,	\
+					  ARRAY_SIZE(cmt##idx##_resources), \
+					  &cmt##idx##_platform_data,	\
+					  sizeof(struct sh_timer_config))
+
 void __init r8a7790_add_standard_devices(void)
 {
 	r8a7790_register_scif(SCIFA0);
@@ -162,34 +192,91 @@ void __init r8a7790_add_standard_devices(void)
 	r8a7790_register_scif(HSCIF0);
 	r8a7790_register_scif(HSCIF1);
 	r8a7790_register_irqc(0);
+	r8a7790_register_thermal();
+	r8a7790_register_cmt(00);
 }
 
+#define MODEMR 0xe6160060
+
+u32 __init r8a7790_read_mode_pins(void)
+{
+	void __iomem *modemr = ioremap_nocache(MODEMR, 4);
+	u32 mode;
+
+	BUG_ON(!modemr);
+	mode = ioread32(modemr);
+	iounmap(modemr);
+
+	return mode;
+}
+
+#define CNTCR 0
+#define CNTFID0 0x20
+
 void __init r8a7790_timer_init(void)
 {
-	void __iomem *cntcr;
+#ifdef CONFIG_ARM_ARCH_TIMER
+	u32 mode = r8a7790_read_mode_pins();
+	void __iomem *base;
+	int extal_mhz = 0;
+	u32 freq;
+
+	/* At Linux boot time the r8a7790 arch timer comes up
+	 * with the counter disabled. Moreover, it may also report
+	 * a potentially incorrect fixed 13 MHz frequency. To be
+	 * correct these registers need to be updated to use the
+	 * frequency EXTAL / 2 which can be determined by the MD pins.
+	 */
+
+	switch (mode & (MD(14) | MD(13))) {
+	case 0:
+		extal_mhz = 15;
+		break;
+	case MD(13):
+		extal_mhz = 20;
+		break;
+	case MD(14):
+		extal_mhz = 26;
+		break;
+	case MD(13) | MD(14):
+		extal_mhz = 30;
+		break;
+	}
 
-	/* make sure arch timer is started by setting bit 0 of CNTCT */
-	cntcr = ioremap(0xe6080000, PAGE_SIZE);
-	iowrite32(1, cntcr);
-	iounmap(cntcr);
+	/* The arch timer frequency equals EXTAL / 2 */
+	freq = extal_mhz * (1000000 / 2);
+
+	/* Remap "armgcnt address map" space */
+	base = ioremap(0xe6080000, PAGE_SIZE);
+
+	/* Update registers with correct frequency */
+	iowrite32(freq, base + CNTFID0);
+	asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq));
+
+	/* make sure arch timer is started by setting bit 0 of CNTCR */
+	iowrite32(1, base + CNTCR);
+	iounmap(base);
+#endif /* CONFIG_ARM_ARCH_TIMER */
 
 	shmobile_timer_init();
 }
 
-#ifdef CONFIG_USE_OF
-void __init r8a7790_add_standard_devices_dt(void)
+void __init r8a7790_init_delay(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+#ifndef CONFIG_ARM_ARCH_TIMER
+	shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */
+#endif
 }
 
+#ifdef CONFIG_USE_OF
+
 static const char *r8a7790_boards_compat_dt[] __initdata = {
 	"renesas,r8a7790",
 	NULL,
 };
 
 DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)")
-	.init_irq	= irqchip_init,
-	.init_machine	= r8a7790_add_standard_devices_dt,
+	.init_early	= r8a7790_init_delay,
 	.init_time	= r8a7790_timer_init,
 	.dt_compat	= r8a7790_boards_compat_dt,
 MACHINE_END

arch/arm/mach-shmobile/setup-sh7372.c

@@ -1147,10 +1147,6 @@ void __init sh7372_add_early_devices_dt(void)
 	shmobile_setup_console();
 }
 
-static const struct of_dev_auxdata sh7372_auxdata_lookup[] __initconst = {
-	{ }
-};
-
 void __init sh7372_add_standard_devices_dt(void)
 {
 	/* clocks are setup late during boot in the case of DT */
@@ -1159,8 +1155,7 @@ void __init sh7372_add_standard_devices_dt(void)
 	platform_add_devices(sh7372_early_devices,
 			    ARRAY_SIZE(sh7372_early_devices));
 
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     sh7372_auxdata_lookup, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static const char *sh7372_boards_compat_dt[] __initdata = {

arch/arm/mach-shmobile/setup-sh73a0.c

@@ -22,7 +22,6 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/irqchip.h>
 #include <linux/platform_device.h>
 #include <linux/of_platform.h>
 #include <linux/delay.h>
@@ -61,29 +60,16 @@ void __init sh73a0_map_io(void)
 	iotable_init(sh73a0_io_desc, ARRAY_SIZE(sh73a0_io_desc));
 }
 
-static struct resource sh73a0_pfc_resources[] = {
-	[0] = {
-		.start	= 0xe6050000,
-		.end	= 0xe6057fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 0xe605801c,
-		.end	= 0xe6058027,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device sh73a0_pfc_device = {
-	.name		= "pfc-sh73a0",
-	.id		= -1,
-	.resource	= sh73a0_pfc_resources,
-	.num_resources	= ARRAY_SIZE(sh73a0_pfc_resources),
+/* PFC */
+static struct resource pfc_resources[] __initdata = {
+	DEFINE_RES_MEM(0xe6050000, 0x8000),
+	DEFINE_RES_MEM(0xe605801c, 0x000c),
 };
 
 void __init sh73a0_pinmux_init(void)
 {
-	platform_device_register(&sh73a0_pfc_device);
+	platform_device_register_simple("pfc-sh73a0", -1, pfc_resources,
+					ARRAY_SIZE(pfc_resources));
 }
 
 static struct plat_sci_port scif0_platform_data = {
@@ -958,10 +944,6 @@ void __init sh73a0_add_early_devices(void)
 
 #ifdef CONFIG_USE_OF
 
-static const struct of_dev_auxdata sh73a0_auxdata_lookup[] __initconst = {
-	{},
-};
-
 void __init sh73a0_add_standard_devices_dt(void)
 {
 	struct platform_device_info devinfo = { .name = "cpufreq-cpu0", .id = -1, };
@@ -971,8 +953,7 @@ void __init sh73a0_add_standard_devices_dt(void)
 
 	platform_add_devices(sh73a0_devices_dt,
 			     ARRAY_SIZE(sh73a0_devices_dt));
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     sh73a0_auxdata_lookup, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 
 	/* Instantiate cpufreq-cpu0 */
 	platform_device_register_full(&devinfo);
@@ -988,7 +969,6 @@ DT_MACHINE_START(SH73A0_DT, "Generic SH73A0 (Flattened Device Tree)")
 	.map_io		= sh73a0_map_io,
 	.init_early	= sh73a0_init_delay,
 	.nr_irqs	= NR_IRQS_LEGACY,
-	.init_irq	= irqchip_init,
 	.init_machine	= sh73a0_add_standard_devices_dt,
 	.dt_compat	= sh73a0_boards_compat_dt,
 MACHINE_END

arch/arm/mach-shmobile/smp-emev2.c

@@ -29,6 +29,8 @@
 #include <asm/smp_scu.h>
 
 #define EMEV2_SCU_BASE 0x1e000000
+#define EMEV2_SMU_BASE 0xe0110000
+#define SMU_GENERAL_REG0 0x7c0
 
 static int emev2_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
@@ -38,10 +40,18 @@ static int emev2_boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 static void __init emev2_smp_prepare_cpus(unsigned int max_cpus)
 {
+	void __iomem *smu;
+
+	/* setup EMEV2 specific SCU base, enable */
+	shmobile_scu_base = ioremap(EMEV2_SCU_BASE, PAGE_SIZE);
 	scu_enable(shmobile_scu_base);
 
 	/* Tell ROM loader about our vector (in headsmp-scu.S, headsmp.S) */
-	emev2_set_boot_vector(__pa(shmobile_boot_vector));
+	smu = ioremap(EMEV2_SMU_BASE, PAGE_SIZE);
+	if (smu) {
+		iowrite32(__pa(shmobile_boot_vector), smu + SMU_GENERAL_REG0);
+		iounmap(smu);
+	}
 	shmobile_boot_fn = virt_to_phys(shmobile_boot_scu);
 	shmobile_boot_arg = (unsigned long)shmobile_scu_base;
 
@@ -49,21 +59,7 @@ static void __init emev2_smp_prepare_cpus(unsigned int max_cpus)
 	scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL);
 }
 
-static void __init emev2_smp_init_cpus(void)
-{
-	unsigned int ncores;
-
-	/* setup EMEV2 specific SCU base */
-	shmobile_scu_base = ioremap(EMEV2_SCU_BASE, PAGE_SIZE);
-	emev2_clock_init(); /* need ioremapped SMU */
-
-	ncores = shmobile_scu_base ? scu_get_core_count(shmobile_scu_base) : 1;
-
-	shmobile_smp_init_cpus(ncores);
-}
-
 struct smp_operations emev2_smp_ops __initdata = {
-	.smp_init_cpus		= emev2_smp_init_cpus,
 	.smp_prepare_cpus	= emev2_smp_prepare_cpus,
 	.smp_boot_secondary	= emev2_boot_secondary,
 };