Commit fc8c7238 authored by Steve Longerbeam's avatar Steve Longerbeam Committed by Mauro Carvalho Chehab

media: gpu: ipu-csi: Swap fields according to input/output field types

The function ipu_csi_init_interface() was inverting the F-bit for
NTSC case, in the CCIR_CODE_1/2 registers. The result being that
for NTSC bottom-top field order, the CSI would swap fields and
capture in top-bottom order.

Instead, base field swap on the field order of the input to the CSI,
and the field order of the requested output. If the input/output
fields are sequential but different, swap fields, otherwise do
not swap. This requires passing both the input and output mbus
frame formats to ipu_csi_init_interface().

Move this code to a new private function ipu_csi_set_bt_interlaced_codes()
that programs the CCIR_CODE_1/2 registers for interlaced BT.656 (and
possibly interlaced BT.1120 in the future).

When detecting input video standard from the input frame width/height,
make sure to double height if input field type is alternate, since
in that case input height only includes lines for one field.
Signed-off-by: default avatarSteve Longerbeam <slongerbeam@gmail.com>
Reviewed-by: default avatarPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: default avatarHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab+samsung@kernel.org>
parent 1c3721b1
......@@ -325,12 +325,21 @@ static int mbus_code_to_bus_cfg(struct ipu_csi_bus_config *cfg, u32 mbus_code,
return 0;
}
/* translate alternate field mode based on given standard */
static inline enum v4l2_field
ipu_csi_translate_field(enum v4l2_field field, v4l2_std_id std)
{
return (field != V4L2_FIELD_ALTERNATE) ? field :
((std & V4L2_STD_525_60) ?
V4L2_FIELD_SEQ_BT : V4L2_FIELD_SEQ_TB);
}
/*
* Fill a CSI bus config struct from mbus_config and mbus_framefmt.
*/
static int fill_csi_bus_cfg(struct ipu_csi_bus_config *csicfg,
struct v4l2_mbus_config *mbus_cfg,
struct v4l2_mbus_framefmt *mbus_fmt)
const struct v4l2_mbus_config *mbus_cfg,
const struct v4l2_mbus_framefmt *mbus_fmt)
{
int ret;
......@@ -374,22 +383,76 @@ static int fill_csi_bus_cfg(struct ipu_csi_bus_config *csicfg,
return 0;
}
static int
ipu_csi_set_bt_interlaced_codes(struct ipu_csi *csi,
const struct v4l2_mbus_framefmt *infmt,
const struct v4l2_mbus_framefmt *outfmt,
v4l2_std_id std)
{
enum v4l2_field infield, outfield;
bool swap_fields;
/* get translated field type of input and output */
infield = ipu_csi_translate_field(infmt->field, std);
outfield = ipu_csi_translate_field(outfmt->field, std);
/*
* Write the H-V-F codes the CSI will match against the
* incoming data for start/end of active and blanking
* field intervals. If input and output field types are
* sequential but not the same (one is SEQ_BT and the other
* is SEQ_TB), swap the F-bit so that the CSI will capture
* field 1 lines before field 0 lines.
*/
swap_fields = (V4L2_FIELD_IS_SEQUENTIAL(infield) &&
V4L2_FIELD_IS_SEQUENTIAL(outfield) &&
infield != outfield);
if (!swap_fields) {
/*
* Field0BlankEnd = 110, Field0BlankStart = 010
* Field0ActiveEnd = 100, Field0ActiveStart = 000
* Field1BlankEnd = 111, Field1BlankStart = 011
* Field1ActiveEnd = 101, Field1ActiveStart = 001
*/
ipu_csi_write(csi, 0x40596 | CSI_CCIR_ERR_DET_EN,
CSI_CCIR_CODE_1);
ipu_csi_write(csi, 0xD07DF, CSI_CCIR_CODE_2);
} else {
dev_dbg(csi->ipu->dev, "capture field swap\n");
/* same as above but with F-bit inverted */
ipu_csi_write(csi, 0xD07DF | CSI_CCIR_ERR_DET_EN,
CSI_CCIR_CODE_1);
ipu_csi_write(csi, 0x40596, CSI_CCIR_CODE_2);
}
ipu_csi_write(csi, 0xFF0000, CSI_CCIR_CODE_3);
return 0;
}
int ipu_csi_init_interface(struct ipu_csi *csi,
struct v4l2_mbus_config *mbus_cfg,
struct v4l2_mbus_framefmt *mbus_fmt)
const struct v4l2_mbus_config *mbus_cfg,
const struct v4l2_mbus_framefmt *infmt,
const struct v4l2_mbus_framefmt *outfmt)
{
struct ipu_csi_bus_config cfg;
unsigned long flags;
u32 width, height, data = 0;
v4l2_std_id std;
int ret;
ret = fill_csi_bus_cfg(&cfg, mbus_cfg, mbus_fmt);
ret = fill_csi_bus_cfg(&cfg, mbus_cfg, infmt);
if (ret < 0)
return ret;
/* set default sensor frame width and height */
width = mbus_fmt->width;
height = mbus_fmt->height;
width = infmt->width;
height = infmt->height;
if (infmt->field == V4L2_FIELD_ALTERNATE)
height *= 2;
/* Set the CSI_SENS_CONF register remaining fields */
data |= cfg.data_width << CSI_SENS_CONF_DATA_WIDTH_SHIFT |
......@@ -416,42 +479,22 @@ int ipu_csi_init_interface(struct ipu_csi *csi,
ipu_csi_write(csi, 0xFF0000, CSI_CCIR_CODE_3);
break;
case IPU_CSI_CLK_MODE_CCIR656_INTERLACED:
if (mbus_fmt->width == 720 && mbus_fmt->height == 576) {
/*
* PAL case
*
* Field0BlankEnd = 0x6, Field0BlankStart = 0x2,
* Field0ActiveEnd = 0x4, Field0ActiveStart = 0
* Field1BlankEnd = 0x7, Field1BlankStart = 0x3,
* Field1ActiveEnd = 0x5, Field1ActiveStart = 0x1
*/
height = 625; /* framelines for PAL */
ipu_csi_write(csi, 0x40596 | CSI_CCIR_ERR_DET_EN,
CSI_CCIR_CODE_1);
ipu_csi_write(csi, 0xD07DF, CSI_CCIR_CODE_2);
ipu_csi_write(csi, 0xFF0000, CSI_CCIR_CODE_3);
} else if (mbus_fmt->width == 720 && mbus_fmt->height == 480) {
/*
* NTSC case
*
* Field0BlankEnd = 0x7, Field0BlankStart = 0x3,
* Field0ActiveEnd = 0x5, Field0ActiveStart = 0x1
* Field1BlankEnd = 0x6, Field1BlankStart = 0x2,
* Field1ActiveEnd = 0x4, Field1ActiveStart = 0
*/
height = 525; /* framelines for NTSC */
ipu_csi_write(csi, 0xD07DF | CSI_CCIR_ERR_DET_EN,
CSI_CCIR_CODE_1);
ipu_csi_write(csi, 0x40596, CSI_CCIR_CODE_2);
ipu_csi_write(csi, 0xFF0000, CSI_CCIR_CODE_3);
if (width == 720 && height == 480) {
std = V4L2_STD_NTSC;
height = 525;
} else if (width == 720 && height == 576) {
std = V4L2_STD_PAL;
height = 625;
} else {
dev_err(csi->ipu->dev,
"Unsupported CCIR656 interlaced video mode\n");
spin_unlock_irqrestore(&csi->lock, flags);
return -EINVAL;
"Unsupported interlaced video mode\n");
ret = -EINVAL;
goto out_unlock;
}
ret = ipu_csi_set_bt_interlaced_codes(csi, infmt, outfmt, std);
if (ret)
goto out_unlock;
break;
case IPU_CSI_CLK_MODE_CCIR1120_PROGRESSIVE_DDR:
case IPU_CSI_CLK_MODE_CCIR1120_PROGRESSIVE_SDR:
......@@ -476,9 +519,10 @@ int ipu_csi_init_interface(struct ipu_csi *csi,
dev_dbg(csi->ipu->dev, "CSI_ACT_FRM_SIZE = 0x%08X\n",
ipu_csi_read(csi, CSI_ACT_FRM_SIZE));
out_unlock:
spin_unlock_irqrestore(&csi->lock, flags);
return 0;
return ret;
}
EXPORT_SYMBOL_GPL(ipu_csi_init_interface);
......
......@@ -679,12 +679,7 @@ static int csi_setup(struct csi_priv *priv)
priv->upstream_ep.bus.parallel.flags :
priv->upstream_ep.bus.mipi_csi2.flags;
/*
* we need to pass input frame to CSI interface, but
* with translated field type from output format
*/
if_fmt = *infmt;
if_fmt.field = outfmt->field;
crop = priv->crop;
/*
......@@ -702,7 +697,7 @@ static int csi_setup(struct csi_priv *priv)
priv->crop.width == 2 * priv->compose.width,
priv->crop.height == 2 * priv->compose.height);
ipu_csi_init_interface(priv->csi, &mbus_cfg, &if_fmt);
ipu_csi_init_interface(priv->csi, &mbus_cfg, &if_fmt, outfmt);
ipu_csi_set_dest(priv->csi, priv->dest);
......
......@@ -354,8 +354,9 @@ int ipu_prg_channel_configure(struct ipuv3_channel *ipu_chan,
*/
struct ipu_csi;
int ipu_csi_init_interface(struct ipu_csi *csi,
struct v4l2_mbus_config *mbus_cfg,
struct v4l2_mbus_framefmt *mbus_fmt);
const struct v4l2_mbus_config *mbus_cfg,
const struct v4l2_mbus_framefmt *infmt,
const struct v4l2_mbus_framefmt *outfmt);
bool ipu_csi_is_interlaced(struct ipu_csi *csi);
void ipu_csi_get_window(struct ipu_csi *csi, struct v4l2_rect *w);
void ipu_csi_set_window(struct ipu_csi *csi, struct v4l2_rect *w);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment