Commit fcb1991c authored by Lucas Stach's avatar Lucas Stach Committed by Shawn Guo

arm64: dts: imx8mq: add missing SAI nodes

Currently only SAI2 is present in the DT. Add all the other SAI
instances present on the SoC.
Signed-off-by: default avatarLucas Stach <l.stach@pengutronix.de>
Reviewed-by: default avatarDaniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 4999236e
...@@ -295,6 +295,62 @@ bus@30000000 { /* AIPS1 */ ...@@ -295,6 +295,62 @@ bus@30000000 { /* AIPS1 */
#size-cells = <1>; #size-cells = <1>;
ranges = <0x30000000 0x30000000 0x400000>; ranges = <0x30000000 0x30000000 0x400000>;
sai1: sai@30010000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx8mq-sai";
reg = <0x30010000 0x10000>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MQ_CLK_SAI1_IPG>,
<&clk IMX8MQ_CLK_SAI1_ROOT>,
<&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dmas = <&sdma2 8 24 0>, <&sdma1 9 24 0>;
dma-names = "rx", "tx";
status = "disabled";
};
sai6: sai@30030000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx8mq-sai";
reg = <0x30030000 0x10000>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MQ_CLK_SAI6_IPG>,
<&clk IMX8MQ_CLK_SAI6_ROOT>,
<&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dmas = <&sdma2 4 24 0>, <&sdma2 5 24 0>;
dma-names = "rx", "tx";
status = "disabled";
};
sai5: sai@30040000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx8mq-sai";
reg = <0x30040000 0x10000>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MQ_CLK_SAI5_IPG>,
<&clk IMX8MQ_CLK_SAI5_ROOT>,
<&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dmas = <&sdma2 2 24 0>, <&sdma2 3 24 0>;
dma-names = "rx", "tx";
status = "disabled";
};
sai4: sai@30050000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx8mq-sai";
reg = <0x30050000 0x10000>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MQ_CLK_SAI4_IPG>,
<&clk IMX8MQ_CLK_SAI4_ROOT>,
<&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dmas = <&sdma2 0 24 0>, <&sdma2 1 24 0>;
dma-names = "rx", "tx";
status = "disabled";
};
gpio1: gpio@30200000 { gpio1: gpio@30200000 {
compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio"; compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
reg = <0x30200000 0x10000>; reg = <0x30200000 0x10000>;
...@@ -784,6 +840,20 @@ sai2: sai@308b0000 { ...@@ -784,6 +840,20 @@ sai2: sai@308b0000 {
status = "disabled"; status = "disabled";
}; };
sai3: sai@308c0000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx8mq-sai";
reg = <0x308c0000 0x10000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MQ_CLK_SAI3_IPG>,
<&clk IMX8MQ_CLK_SAI3_ROOT>,
<&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dmas = <&sdma1 12 24 0>, <&sdma1 13 24 0>;
dma-names = "rx", "tx";
status = "disabled";
};
crypto: crypto@30900000 { crypto: crypto@30900000 {
compatible = "fsl,sec-v4.0"; compatible = "fsl,sec-v4.0";
#address-cells = <1>; #address-cells = <1>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment