Skip to content

L
linux
Commit fccdaba4 authored by Zhao Yakui's avatar Zhao Yakui Committed by Eric Anholt
Browse files
Options

drm/i915: Avoid saving/restore the modesetting registers twice in KMS mode 

In KMS mode we now use the normal mode-setting paths to set the modes
back to the current configuration, so we don't need to also run the more
limited non-KMS implementation of modesetting for resume.
Signed-off-by: default avatarZhao Yakui <yakui.zhao@intel.com>
Acked-by: default avatarJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: default avatarEric Anholt <eric@anholt.net>
parent af4fcb57
Hide whitespace changes
Inline Side-by-side
Showing with 121 additions and 100 deletions
drivers/gpu/drm/i915/i915_suspend.c
View file @ fccdaba4
......@@ -222,23 +222,12 @@ static void i915_restore_vga(struct drm_device *dev)
I915_WRITE8(VGA_DACMASK, dev_priv->saveDACMASK);
}
int i915_save_state(struct drm_device *dev)
static void i915_save_modeset_reg(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int i;
pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB);
/* Render Standby */
if (IS_I965G(dev) && IS_MOBILE(dev))
dev_priv->saveRENDERSTANDBY = I915_READ(MCHBAR_RENDER_STANDBY);
/* Hardware status page */
dev_priv->saveHWS = I915_READ(HWS_PGA);
/* Display arbitration control */
dev_priv->saveDSPARB = I915_READ(DSPARB);
if (drm_core_check_feature(dev, DRIVER_MODESET))
return;
/* Pipe & plane A info */
dev_priv->savePIPEACONF = I915_READ(PIPEACONF);
dev_priv->savePIPEASRC = I915_READ(PIPEASRC);
......@@ -294,7 +283,122 @@ int i915_save_state(struct drm_device *dev)
}
i915_save_palette(dev, PIPE_B);
dev_priv->savePIPEBSTAT = I915_READ(PIPEBSTAT);
return;
}
static void i915_restore_modeset_reg(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (drm_core_check_feature(dev, DRIVER_MODESET))
return;
/* Pipe & plane A info */
/* Prime the clock */
if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) {
I915_WRITE(DPLL_A, dev_priv->saveDPLL_A &
~DPLL_VCO_ENABLE);
DRM_UDELAY(150);
}
I915_WRITE(FPA0, dev_priv->saveFPA0);
I915_WRITE(FPA1, dev_priv->saveFPA1);
/* Actually enable it */
I915_WRITE(DPLL_A, dev_priv->saveDPLL_A);
DRM_UDELAY(150);
if (IS_I965G(dev))
I915_WRITE(DPLL_A_MD, dev_priv->saveDPLL_A_MD);
DRM_UDELAY(150);
/* Restore mode */
I915_WRITE(HTOTAL_A, dev_priv->saveHTOTAL_A);
I915_WRITE(HBLANK_A, dev_priv->saveHBLANK_A);
I915_WRITE(HSYNC_A, dev_priv->saveHSYNC_A);
I915_WRITE(VTOTAL_A, dev_priv->saveVTOTAL_A);
I915_WRITE(VBLANK_A, dev_priv->saveVBLANK_A);
I915_WRITE(VSYNC_A, dev_priv->saveVSYNC_A);
I915_WRITE(BCLRPAT_A, dev_priv->saveBCLRPAT_A);
/* Restore plane info */
I915_WRITE(DSPASIZE, dev_priv->saveDSPASIZE);
I915_WRITE(DSPAPOS, dev_priv->saveDSPAPOS);
I915_WRITE(PIPEASRC, dev_priv->savePIPEASRC);
I915_WRITE(DSPAADDR, dev_priv->saveDSPAADDR);
I915_WRITE(DSPASTRIDE, dev_priv->saveDSPASTRIDE);
if (IS_I965G(dev)) {
I915_WRITE(DSPASURF, dev_priv->saveDSPASURF);
I915_WRITE(DSPATILEOFF, dev_priv->saveDSPATILEOFF);
}
I915_WRITE(PIPEACONF, dev_priv->savePIPEACONF);
i915_restore_palette(dev, PIPE_A);
/* Enable the plane */
I915_WRITE(DSPACNTR, dev_priv->saveDSPACNTR);
I915_WRITE(DSPAADDR, I915_READ(DSPAADDR));
/* Pipe & plane B info */
if (dev_priv->saveDPLL_B & DPLL_VCO_ENABLE) {
I915_WRITE(DPLL_B, dev_priv->saveDPLL_B &
~DPLL_VCO_ENABLE);
DRM_UDELAY(150);
}
I915_WRITE(FPB0, dev_priv->saveFPB0);
I915_WRITE(FPB1, dev_priv->saveFPB1);
/* Actually enable it */
I915_WRITE(DPLL_B, dev_priv->saveDPLL_B);
DRM_UDELAY(150);
if (IS_I965G(dev))
I915_WRITE(DPLL_B_MD, dev_priv->saveDPLL_B_MD);
DRM_UDELAY(150);
/* Restore mode */
I915_WRITE(HTOTAL_B, dev_priv->saveHTOTAL_B);
I915_WRITE(HBLANK_B, dev_priv->saveHBLANK_B);
I915_WRITE(HSYNC_B, dev_priv->saveHSYNC_B);
I915_WRITE(VTOTAL_B, dev_priv->saveVTOTAL_B);
I915_WRITE(VBLANK_B, dev_priv->saveVBLANK_B);
I915_WRITE(VSYNC_B, dev_priv->saveVSYNC_B);
I915_WRITE(BCLRPAT_B, dev_priv->saveBCLRPAT_B);
/* Restore plane info */
I915_WRITE(DSPBSIZE, dev_priv->saveDSPBSIZE);
I915_WRITE(DSPBPOS, dev_priv->saveDSPBPOS);
I915_WRITE(PIPEBSRC, dev_priv->savePIPEBSRC);
I915_WRITE(DSPBADDR, dev_priv->saveDSPBADDR);
I915_WRITE(DSPBSTRIDE, dev_priv->saveDSPBSTRIDE);
if (IS_I965G(dev)) {
I915_WRITE(DSPBSURF, dev_priv->saveDSPBSURF);
I915_WRITE(DSPBTILEOFF, dev_priv->saveDSPBTILEOFF);
}
I915_WRITE(PIPEBCONF, dev_priv->savePIPEBCONF);
i915_restore_palette(dev, PIPE_B);
/* Enable the plane */
I915_WRITE(DSPBCNTR, dev_priv->saveDSPBCNTR);
I915_WRITE(DSPBADDR, I915_READ(DSPBADDR));
return;
}
int i915_save_state(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int i;
pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB);
/* Render Standby */
if (IS_I965G(dev) && IS_MOBILE(dev))
dev_priv->saveRENDERSTANDBY = I915_READ(MCHBAR_RENDER_STANDBY);
/* Hardware status page */
dev_priv->saveHWS = I915_READ(HWS_PGA);
/* Display arbitration control */
dev_priv->saveDSPARB = I915_READ(DSPARB);
/* This is only meaningful in non-KMS mode */
/* Don't save them in KMS mode */
i915_save_modeset_reg(dev);
/* Cursor state */
dev_priv->saveCURACNTR = I915_READ(CURACNTR);
dev_priv->saveCURAPOS = I915_READ(CURAPOS);
......@@ -430,92 +534,9 @@ int i915_restore_state(struct drm_device *dev)
I915_WRITE(PIPEA_DP_LINK_N, dev_priv->savePIPEA_DP_LINK_N);
I915_WRITE(PIPEB_DP_LINK_N, dev_priv->savePIPEB_DP_LINK_N);
}
/* Pipe & plane A info */
/* Prime the clock */
if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) {
I915_WRITE(DPLL_A, dev_priv->saveDPLL_A &
~DPLL_VCO_ENABLE);
DRM_UDELAY(150);
}
I915_WRITE(FPA0, dev_priv->saveFPA0);
I915_WRITE(FPA1, dev_priv->saveFPA1);
/* Actually enable it */
I915_WRITE(DPLL_A, dev_priv->saveDPLL_A);
DRM_UDELAY(150);
if (IS_I965G(dev))
I915_WRITE(DPLL_A_MD, dev_priv->saveDPLL_A_MD);
DRM_UDELAY(150);
/* Restore mode */
I915_WRITE(HTOTAL_A, dev_priv->saveHTOTAL_A);
I915_WRITE(HBLANK_A, dev_priv->saveHBLANK_A);
I915_WRITE(HSYNC_A, dev_priv->saveHSYNC_A);
I915_WRITE(VTOTAL_A, dev_priv->saveVTOTAL_A);
I915_WRITE(VBLANK_A, dev_priv->saveVBLANK_A);
I915_WRITE(VSYNC_A, dev_priv->saveVSYNC_A);
I915_WRITE(BCLRPAT_A, dev_priv->saveBCLRPAT_A);
/* Restore plane info */
I915_WRITE(DSPASIZE, dev_priv->saveDSPASIZE);
I915_WRITE(DSPAPOS, dev_priv->saveDSPAPOS);
I915_WRITE(PIPEASRC, dev_priv->savePIPEASRC);
I915_WRITE(DSPAADDR, dev_priv->saveDSPAADDR);
I915_WRITE(DSPASTRIDE, dev_priv->saveDSPASTRIDE);
if (IS_I965G(dev)) {
I915_WRITE(DSPASURF, dev_priv->saveDSPASURF);
I915_WRITE(DSPATILEOFF, dev_priv->saveDSPATILEOFF);
}
I915_WRITE(PIPEACONF, dev_priv->savePIPEACONF);
i915_restore_palette(dev, PIPE_A);
/* Enable the plane */
I915_WRITE(DSPACNTR, dev_priv->saveDSPACNTR);
I915_WRITE(DSPAADDR, I915_READ(DSPAADDR));
/* Pipe & plane B info */
if (dev_priv->saveDPLL_B & DPLL_VCO_ENABLE) {
I915_WRITE(DPLL_B, dev_priv->saveDPLL_B &
~DPLL_VCO_ENABLE);
DRM_UDELAY(150);
}
I915_WRITE(FPB0, dev_priv->saveFPB0);
I915_WRITE(FPB1, dev_priv->saveFPB1);
/* Actually enable it */
I915_WRITE(DPLL_B, dev_priv->saveDPLL_B);
DRM_UDELAY(150);
if (IS_I965G(dev))
I915_WRITE(DPLL_B_MD, dev_priv->saveDPLL_B_MD);
DRM_UDELAY(150);
/* Restore mode */
I915_WRITE(HTOTAL_B, dev_priv->saveHTOTAL_B);
I915_WRITE(HBLANK_B, dev_priv->saveHBLANK_B);
I915_WRITE(HSYNC_B, dev_priv->saveHSYNC_B);
I915_WRITE(VTOTAL_B, dev_priv->saveVTOTAL_B);
I915_WRITE(VBLANK_B, dev_priv->saveVBLANK_B);
I915_WRITE(VSYNC_B, dev_priv->saveVSYNC_B);
I915_WRITE(BCLRPAT_B, dev_priv->saveBCLRPAT_B);
/* Restore plane info */
I915_WRITE(DSPBSIZE, dev_priv->saveDSPBSIZE);
I915_WRITE(DSPBPOS, dev_priv->saveDSPBPOS);
I915_WRITE(PIPEBSRC, dev_priv->savePIPEBSRC);
I915_WRITE(DSPBADDR, dev_priv->saveDSPBADDR);
I915_WRITE(DSPBSTRIDE, dev_priv->saveDSPBSTRIDE);
if (IS_I965G(dev)) {
I915_WRITE(DSPBSURF, dev_priv->saveDSPBSURF);
I915_WRITE(DSPBTILEOFF, dev_priv->saveDSPBTILEOFF);
}
I915_WRITE(PIPEBCONF, dev_priv->savePIPEBCONF);
i915_restore_palette(dev, PIPE_B);
/* Enable the plane */
I915_WRITE(DSPBCNTR, dev_priv->saveDSPBCNTR);
I915_WRITE(DSPBADDR, I915_READ(DSPBADDR));
/* This is only meaningful in non-KMS mode */
/* Don't restore them in KMS mode */
i915_restore_modeset_reg(dev);
/* Cursor state */
I915_WRITE(CURAPOS, dev_priv->saveCURAPOS);
I915_WRITE(CURACNTR, dev_priv->saveCURACNTR);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7