Commit fd17ed68 authored by Kunihiko Hayashi's avatar Kunihiko Hayashi Committed by Tejun Heo

Revert "ata: ahci-platform: add reset control support"

This reverts commit f0f56716.

According to Thierry's view,
https://www.spinics.net/lists/linux-ide/msg55357.html
some hardware-specific drivers already use their own resets,
and the common reset might make a path to occur double controls of resets.

For now, revert the commit that adds reset control support to ahci-platform,
and hold until the solution is confirmed not be affect all hardware-specific
drivers.

Fixes: f0f56716 ("ata: ahci-platform: add reset control support")
Reported-by: default avatarThierry Reding <thierry.reding@gmail.com>
Suggested-by: default avatarHans de Goede <hdegoede@redhat.com>
Acked-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarKunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
parent fd3b36d2
......@@ -30,7 +30,6 @@ compatible:
Optional properties:
- dma-coherent : Present if dma operations are coherent
- clocks : a list of phandle + clock specifier pairs
- resets : a list of phandle + reset specifier pairs
- target-supply : regulator for SATA target power
- phys : reference to the SATA PHY node
- phy-names : must be "sata-phy"
......
......@@ -350,7 +350,6 @@ struct ahci_host_priv {
u32 em_msg_type; /* EM message type */
bool got_runtime_pm; /* Did we do pm_runtime_get? */
struct clk *clks[AHCI_MAX_CLKS]; /* Optional */
struct reset_control *rsts; /* Optional */
struct regulator **target_pwrs; /* Optional */
/*
* If platform uses PHYs. There is a 1:1 relation between the port number and
......
......@@ -25,7 +25,6 @@
#include <linux/phy/phy.h>
#include <linux/pm_runtime.h>
#include <linux/of_platform.h>
#include <linux/reset.h>
#include "ahci.h"
static void ahci_host_stop(struct ata_host *host);
......@@ -196,8 +195,7 @@ EXPORT_SYMBOL_GPL(ahci_platform_disable_regulators);
* following order:
* 1) Regulator
* 2) Clocks (through ahci_platform_enable_clks)
* 3) Resets
* 4) Phys
* 3) Phys
*
* If resource enabling fails at any point the previous enabled resources
* are disabled in reverse order.
......@@ -217,19 +215,12 @@ int ahci_platform_enable_resources(struct ahci_host_priv *hpriv)
if (rc)
goto disable_regulator;
rc = reset_control_deassert(hpriv->rsts);
if (rc)
goto disable_clks;
rc = ahci_platform_enable_phys(hpriv);
if (rc)
goto disable_resets;
goto disable_clks;
return 0;
disable_resets:
reset_control_assert(hpriv->rsts);
disable_clks:
ahci_platform_disable_clks(hpriv);
......@@ -248,15 +239,12 @@ EXPORT_SYMBOL_GPL(ahci_platform_enable_resources);
* following order:
* 1) Phys
* 2) Clocks (through ahci_platform_disable_clks)
* 3) Resets
* 4) Regulator
* 3) Regulator
*/
void ahci_platform_disable_resources(struct ahci_host_priv *hpriv)
{
ahci_platform_disable_phys(hpriv);
reset_control_assert(hpriv->rsts);
ahci_platform_disable_clks(hpriv);
ahci_platform_disable_regulators(hpriv);
......@@ -405,12 +393,6 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev)
hpriv->clks[i] = clk;
}
hpriv->rsts = devm_reset_control_array_get_optional_shared(dev);
if (IS_ERR(hpriv->rsts)) {
rc = PTR_ERR(hpriv->rsts);
goto err_out;
}
hpriv->nports = child_nodes = of_get_child_count(dev->of_node);
/*
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment