/spare/repo/netdev-2.6 branch 'ieee80211'

include/net/ieee80211.h

@@ -24,15 +24,6 @@
 #include <linux/kernel.h>   /* ARRAY_SIZE */
 #include <linux/wireless.h>
 
-#if WIRELESS_EXT < 17
-#define IW_QUAL_QUAL_INVALID   0x10
-#define IW_QUAL_LEVEL_INVALID  0x20
-#define IW_QUAL_NOISE_INVALID  0x40
-#define IW_QUAL_QUAL_UPDATED   0x1
-#define IW_QUAL_LEVEL_UPDATED  0x2
-#define IW_QUAL_NOISE_UPDATED  0x4
-#endif
-
 #define IEEE80211_DATA_LEN		2304
 /* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
    6.2.1.1.2.
@@ -65,35 +56,6 @@ struct ieee80211_hdr_3addr {
 	__le16 seq_ctl;
 } __attribute__ ((packed));
 
-enum eap_type {
-	EAP_PACKET = 0,
-	EAPOL_START,
-	EAPOL_LOGOFF,
-	EAPOL_KEY,
-	EAPOL_ENCAP_ASF_ALERT
-};
-
-static const char *eap_types[] = {
-	[EAP_PACKET]		= "EAP-Packet",
-	[EAPOL_START]		= "EAPOL-Start",
-	[EAPOL_LOGOFF]		= "EAPOL-Logoff",
-	[EAPOL_KEY]		= "EAPOL-Key",
-	[EAPOL_ENCAP_ASF_ALERT]	= "EAPOL-Encap-ASF-Alert"
-};
-
-static inline const char *eap_get_type(int type)
-{
-	return (type >= ARRAY_SIZE(eap_types)) ? "Unknown" : eap_types[type];
-}
-
-struct eapol {
-	u8 snap[6];
-	__be16 ethertype;
-	u8 version;
-	u8 type;
-	__be16 length;
-} __attribute__ ((packed));
-
 #define IEEE80211_1ADDR_LEN 10
 #define IEEE80211_2ADDR_LEN 16
 #define IEEE80211_3ADDR_LEN 24
@@ -196,11 +158,11 @@ const char *escape_essid(const char *essid, u8 essid_len);
  *
  * To add your debug level to the list of levels seen when you perform
  *
- * % cat /proc/net/ipw/debug_level
+ * % cat /proc/net/ieee80211/debug_level
  *
- * you simply need to add your entry to the ipw_debug_levels array.
+ * you simply need to add your entry to the ieee80211_debug_level array.
  *
- * If you do not see debug_level in /proc/net/ipw then you do not have
+ * If you do not see debug_level in /proc/net/ieee80211 then you do not have
  * CONFIG_IEEE80211_DEBUG defined in your kernel configuration
  *
  */
@@ -211,7 +173,6 @@ const char *escape_essid(const char *essid, u8 essid_len);
 #define IEEE80211_DL_STATE         (1<<3)
 #define IEEE80211_DL_MGMT          (1<<4)
 #define IEEE80211_DL_FRAG          (1<<5)
-#define IEEE80211_DL_EAP           (1<<6)
 #define IEEE80211_DL_DROP          (1<<7)
 
 #define IEEE80211_DL_TX            (1<<8)
@@ -226,7 +187,6 @@ const char *escape_essid(const char *essid, u8 essid_len);
 #define IEEE80211_DEBUG_STATE(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_STATE, f, ## a)
 #define IEEE80211_DEBUG_MGMT(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_MGMT, f, ## a)
 #define IEEE80211_DEBUG_FRAG(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_FRAG, f, ## a)
-#define IEEE80211_DEBUG_EAP(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_EAP, f, ## a)
 #define IEEE80211_DEBUG_DROP(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_DROP, f, ## a)
 #define IEEE80211_DEBUG_TX(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_TX, f, ## a)
 #define IEEE80211_DEBUG_RX(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_RX, f, ## a)

net/ieee80211/ieee80211_rx.c

@@ -628,14 +628,8 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
 	if (crypt && !(fc & IEEE80211_FCTL_PROTECTED) && !ieee->open_wep) {
 		if (/*ieee->ieee802_1x &&*/
 		    ieee80211_is_eapol_frame(ieee, skb)) {
-#ifdef CONFIG_IEEE80211_DEBUG
 			/* pass unencrypted EAPOL frames even if encryption is
 			 * configured */
-			struct eapol *eap = (struct eapol *)(skb->data +
-				24);
-			IEEE80211_DEBUG_EAP("RX: IEEE 802.1X EAPOL frame: %s\n",
-						eap_get_type(eap->type));
-#endif
 		} else {
 			IEEE80211_DEBUG_DROP(
 				"encryption configured, but RX "
@@ -645,16 +639,6 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
 		}
 	}
 
-#ifdef CONFIG_IEEE80211_DEBUG
-	if (crypt && !(fc & IEEE80211_FCTL_PROTECTED) &&
-	    ieee80211_is_eapol_frame(ieee, skb)) {
-			struct eapol *eap = (struct eapol *)(skb->data +
-				24);
-			IEEE80211_DEBUG_EAP("RX: IEEE 802.1X EAPOL frame: %s\n",
-						eap_get_type(eap->type));
-	}
-#endif
-
 	if (crypt && !(fc & IEEE80211_FCTL_PROTECTED) && !ieee->open_wep &&
 	    !ieee80211_is_eapol_frame(ieee, skb)) {
 		IEEE80211_DEBUG_DROP(

net/ieee80211/ieee80211_tx.c

@@ -292,15 +292,6 @@ int ieee80211_xmit(struct sk_buff *skb,
 		goto success;
 	}
 
-#ifdef CONFIG_IEEE80211_DEBUG
-	if (crypt && !encrypt && ether_type == ETH_P_PAE) {
-		struct eapol *eap = (struct eapol *)(skb->data +
-			sizeof(struct ethhdr) - SNAP_SIZE - sizeof(u16));
-		IEEE80211_DEBUG_EAP("TX: IEEE 802.11 EAPOL frame: %s\n",
-			eap_get_type(eap->type));
-	}
-#endif
-
 	/* Save source and destination addresses */
 	memcpy(&dest, skb->data, ETH_ALEN);
 	memcpy(&src, skb->data+ETH_ALEN, ETH_ALEN);