Skip to content

L
linux
Commit fdb0a1a6 authored by Russell King's avatar Russell King Committed by Russell King
Browse files
Options

Merge branch 'next-merged' of git://aeryn.fluff.org.uk/bjdooks/linux into devel

parents fc0b7a20 7bb56d01
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 10761 additions and 1189 deletions
arch/arm/Kconfig
View file @ fdb0a1a6
......@@ -518,6 +518,13 @@ config ARCH_S3C2410
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
the Samsung SMDK2410 development board (and derivatives).
config ARCH_S3C64XX
bool "Samsung S3C64XX"
select GENERIC_GPIO
select HAVE_CLK
help
Samsung S3C64XX series based systems
config ARCH_SHARK
bool "Shark"
select CPU_SA110
......@@ -621,6 +628,7 @@ source "arch/arm/mach-orion5x/Kconfig"
source "arch/arm/mach-kirkwood/Kconfig"
source "arch/arm/plat-s3c24xx/Kconfig"
source "arch/arm/plat-s3c64xx/Kconfig"
source "arch/arm/plat-s3c/Kconfig"
if ARCH_S3C2410
......@@ -632,6 +640,11 @@ source "arch/arm/mach-s3c2442/Kconfig"
source "arch/arm/mach-s3c2443/Kconfig"
endif
if ARCH_S3C64XX
source "arch/arm/mach-s3c6400/Kconfig"
source "arch/arm/mach-s3c6410/Kconfig"
endif
source "arch/arm/mach-lh7a40x/Kconfig"
source "arch/arm/mach-imx/Kconfig"
......
arch/arm/Makefile
View file @ fdb0a1a6
......@@ -121,7 +121,10 @@ endif
machine-$(CONFIG_ARCH_OMAP3) := omap2
plat-$(CONFIG_ARCH_OMAP) := omap
machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0
plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c
machine-$(CONFIG_ARCH_S3C64XX) := s3c6400 s3c6410
plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c
machine-$(CONFIG_ARCH_LH7A40X) := lh7a40x
machine-$(CONFIG_ARCH_VERSATILE) := versatile
machine-$(CONFIG_ARCH_IMX) := imx
......
arch/arm/common/vic.c
View file @ fdb0a1a6
......@@ -69,12 +69,12 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
/*
* Make sure we clear all existing interrupts
*/
writel(0, base + VIC_VECT_ADDR);
writel(0, base + VIC_PL190_VECT_ADDR);
for (i = 0; i < 19; i++) {
unsigned int value;
value = readl(base + VIC_VECT_ADDR);
writel(value, base + VIC_VECT_ADDR);
value = readl(base + VIC_PL190_VECT_ADDR);
writel(value, base + VIC_PL190_VECT_ADDR);
}
for (i = 0; i < 16; i++) {
......@@ -82,7 +82,7 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
writel(VIC_VECT_CNTL_ENABLE | i, reg);
}
writel(32, base + VIC_DEF_VECT_ADDR);
writel(32, base + VIC_PL190_DEF_VECT_ADDR);
for (i = 0; i < 32; i++) {
unsigned int irq = irq_start + i;
......
arch/arm/configs/s3c6400_defconfig 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/include/asm/hardware/vic.h
View file @ fdb0a1a6
......@@ -29,15 +29,17 @@
#define VIC_INT_SOFT 0x18
#define VIC_INT_SOFT_CLEAR 0x1c
#define VIC_PROTECT 0x20
#define VIC_VECT_ADDR 0x30
#define VIC_DEF_VECT_ADDR 0x34
#define VIC_PL190_VECT_ADDR 0x30 /* PL190 only */
#define VIC_PL190_DEF_VECT_ADDR 0x34 /* PL190 only */
#define VIC_VECT_ADDR0 0x100 /* 0 to 15 */
#define VIC_VECT_CNTL0 0x200 /* 0 to 15 */
#define VIC_VECT_ADDR0 0x100 /* 0 to 15 (0..31 PL192) */
#define VIC_VECT_CNTL0 0x200 /* 0 to 15 (0..31 PL192) */
#define VIC_ITCR 0x300 /* VIC test control register */
#define VIC_VECT_CNTL_ENABLE (1 << 5)
#define VIC_PL192_VECT_ADDR 0xF00
#ifndef __ASSEMBLY__
void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources);
#endif
......
arch/arm/mach-s3c2410/Kconfig
View file @ fdb0a1a6
......@@ -33,11 +33,6 @@ config S3C2410_GPIO
help
GPIO code for S3C2410 and similar processors
config S3C2410_CLOCK
bool
help
Clock code for the S3C2410, and similar processors
config SIMTEC_NOR
bool
help
......@@ -85,6 +80,7 @@ config ARCH_BAST
select PM_SIMTEC if PM
select SIMTEC_NOR
select MACH_BAST_IDE
select S3C24XX_DCLK
select ISA
help
Say Y here if you are using the Simtec Electronics EB2410ITX
......@@ -122,6 +118,7 @@ config MACH_TCT_HAMMER
config MACH_VR1000
bool "Thorcom VR1000"
select PM_SIMTEC if PM
select S3C24XX_DCLK
select SIMTEC_NOR
select MACH_BAST_IDE
select CPU_S3C2410
......
arch/arm/mach-s3c2410/Makefile
View file @ fdb0a1a6
......@@ -15,7 +15,6 @@ obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o
obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o
obj-$(CONFIG_S3C2410_PM) += pm.o sleep.o
obj-$(CONFIG_S3C2410_GPIO) += gpio.o
obj-$(CONFIG_S3C2410_CLOCK) += clock.o
# Machine support
......
arch/arm/mach-s3c2410/include/mach/gpio-core.h 0 → 100644
View file @ fdb0a1a6
/* arch/arm/mach-s3c24100/include/mach/gpio-core.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* S3C2410 - GPIO core support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_GPIO_CORE_H
#define __ASM_ARCH_GPIO_CORE_H __FILE__
#include <plat/gpio-core.h>
#include <mach/regs-gpio.h>
extern struct s3c_gpio_chip s3c24xx_gpios[];
static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin)
{
struct s3c_gpio_chip *chip;
if (pin > S3C2410_GPG10)
return NULL;
chip = &s3c24xx_gpios[pin/32];
return (S3C2410_GPIO_OFFSET(pin) > chip->chip.ngpio) ? chip : NULL;
}
#endif /* __ASM_ARCH_GPIO_CORE_H */
arch/arm/mach-s3c2410/include/mach/gpio.h
View file @ fdb0a1a6
......@@ -15,4 +15,10 @@
#define gpio_set_value __gpio_set_value
#define gpio_cansleep __gpio_cansleep
/* some boards require extra gpio capacity to support external
* devices that need GPIO.
*/
#define ARCH_NR_GPIOS (256 + CONFIG_S3C24XX_GPIO_EXTRA)
#include <asm-generic/gpio.h>
arch/arm/mach-s3c2410/include/mach/irqs.h
View file @ fdb0a1a6
......@@ -134,6 +134,8 @@
#define IRQ_S3C2443_HSMMC S3C2410_IRQ(20) /* IRQ_SDI */
#define IRQ_S3C2443_NAND S3C2410_IRQ(24) /* reserved */
#define IRQ_HSMMC0 IRQ_S3C2443_HSMMC
#define IRQ_S3C2443_LCD1 S3C2410_IRQSUB(14)
#define IRQ_S3C2443_LCD2 S3C2410_IRQSUB(15)
#define IRQ_S3C2443_LCD3 S3C2410_IRQSUB(16)
......@@ -160,6 +162,12 @@
#define NR_IRQS (IRQ_S3C2440_AC97+1)
#endif
/* compatibility define. */
#define IRQ_UART3 IRQ_S3C2443_UART3
#define IRQ_S3CUART_RX3 IRQ_S3C2443_RX3
#define IRQ_S3CUART_TX3 IRQ_S3C2443_TX3
#define IRQ_S3CUART_ERR3 IRQ_S3C2443_ERR3
/* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
#define FIQ_START IRQ_EINT0
......
arch/arm/mach-s3c2410/include/mach/map.h
View file @ fdb0a1a6
......@@ -13,34 +13,20 @@
#ifndef __ASM_ARCH_MAP_H
#define __ASM_ARCH_MAP_H
#include <plat/map-base.h>
#include <plat/map.h>
#define S3C2410_ADDR(x) S3C_ADDR(x)
/* interrupt controller is the first thing we put in, to make
* the assembly code for the irq detection easier
*/
#define S3C24XX_VA_IRQ S3C_VA_IRQ
#define S3C2410_PA_IRQ (0x4A000000)
#define S3C24XX_SZ_IRQ SZ_1M
/* memory controller registers */
#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
#define S3C2410_PA_MEMCTRL (0x48000000)
#define S3C24XX_SZ_MEMCTRL SZ_1M
/* USB host controller */
#define S3C2410_PA_USBHOST (0x49000000)
#define S3C24XX_SZ_USBHOST SZ_1M
/* DMA controller */
#define S3C2410_PA_DMA (0x4B000000)
#define S3C24XX_SZ_DMA SZ_1M
/* Clock and Power management */
#define S3C24XX_VA_CLKPWR S3C_VA_SYS
#define S3C2410_PA_CLKPWR (0x4C000000)
#define S3C24XX_SZ_CLKPWR SZ_1M
/* LCD controller */
#define S3C2410_PA_LCD (0x4D000000)
......@@ -48,48 +34,12 @@
/* NAND flash controller */
#define S3C2410_PA_NAND (0x4E000000)
#define S3C24XX_SZ_NAND SZ_1M
/* UARTs */
#define S3C24XX_VA_UART S3C_VA_UART
#define S3C2410_PA_UART (0x50000000)
#define S3C24XX_SZ_UART SZ_1M
/* Timers */
#define S3C24XX_VA_TIMER S3C_VA_TIMER
#define S3C2410_PA_TIMER (0x51000000)
#define S3C24XX_SZ_TIMER SZ_1M
/* USB Device port */
#define S3C2410_PA_USBDEV (0x52000000)
#define S3C24XX_SZ_USBDEV SZ_1M
/* Watchdog */
#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
#define S3C2410_PA_WATCHDOG (0x53000000)
#define S3C24XX_SZ_WATCHDOG SZ_1M
/* IIC hardware controller */
#define S3C2410_PA_IIC (0x54000000)
#define S3C24XX_SZ_IIC SZ_1M
/* IIS controller */
#define S3C2410_PA_IIS (0x55000000)
#define S3C24XX_SZ_IIS SZ_1M
/* GPIO ports */
/* the calculation for the VA of this must ensure that
* it is the same distance apart from the UART in the
* phsyical address space, as the initial mapping for the IO
* is done as a 1:1 maping. This puts it (currently) at
* 0xFA800000, which is not in the way of any current mapping
* by the base system.
*/
#define S3C2410_PA_GPIO (0x56000000)
#define S3C24XX_VA_GPIO ((S3C2410_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
#define S3C24XX_SZ_GPIO SZ_1M
/* RTC */
#define S3C2410_PA_RTC (0x57000000)
......@@ -97,15 +47,12 @@
/* ADC */
#define S3C2410_PA_ADC (0x58000000)
#define S3C24XX_SZ_ADC SZ_1M
/* SPI */
#define S3C2410_PA_SPI (0x59000000)
#define S3C24XX_SZ_SPI SZ_1M
/* SDI */
#define S3C2410_PA_SDI (0x5A000000)
#define S3C24XX_SZ_SDI SZ_1M
/* CAMIF */
#define S3C2440_PA_CAMIF (0x4F000000)
......@@ -120,13 +67,6 @@
#define S3C2443_PA_HSMMC (0x4A800000)
#define S3C2443_SZ_HSMMC (256)
/* ISA style IO, for each machine to sort out mappings for, if it
* implements it. We reserve two 16M regions for ISA.
*/
#define S3C24XX_VA_ISA_WORD S3C2410_ADDR(0x02000000)
#define S3C24XX_VA_ISA_BYTE S3C2410_ADDR(0x03000000)
/* physical addresses of all the chip-select areas */
#define S3C2410_CS0 (0x00000000)
......@@ -152,27 +92,16 @@
#define S3C24XX_PA_TIMER S3C2410_PA_TIMER
#define S3C24XX_PA_USBDEV S3C2410_PA_USBDEV
#define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG
#define S3C24XX_PA_IIC S3C2410_PA_IIC
#define S3C24XX_PA_IIS S3C2410_PA_IIS
#define S3C24XX_PA_GPIO S3C2410_PA_GPIO
#define S3C24XX_PA_RTC S3C2410_PA_RTC
#define S3C24XX_PA_ADC S3C2410_PA_ADC
#define S3C24XX_PA_SPI S3C2410_PA_SPI
#define S3C24XX_PA_SDI S3C2410_PA_SDI
#define S3C24XX_PA_NAND S3C2410_PA_NAND
/* deal with the registers that move under the 2412/2413 */
#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
#ifndef __ASSEMBLY__
extern void __iomem *s3c24xx_va_gpio2;
#endif
#ifdef CONFIG_CPU_S3C2412_ONLY
#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
#else
#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
#endif
#else
#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
#endif
#define S3C_PA_IIC S3C2410_PA_IIC
#define S3C_PA_UART S3C24XX_PA_UART
#define S3C_PA_HSMMC0 S3C2443_PA_HSMMC
#endif /* __ASM_ARCH_MAP_H */
arch/arm/mach-s3c2410/include/mach/regs-clock.h
View file @ fdb0a1a6
......@@ -42,13 +42,6 @@
#define S3C2410_CLKCON_IIS (1<<17)
#define S3C2410_CLKCON_SPI (1<<18)
#define S3C2410_PLLCON_MDIVSHIFT 12
#define S3C2410_PLLCON_PDIVSHIFT 4
#define S3C2410_PLLCON_SDIVSHIFT 0
#define S3C2410_PLLCON_MDIVMASK ((1<<(1+(19-12)))-1)
#define S3C2410_PLLCON_PDIVMASK ((1<<5)-1)
#define S3C2410_PLLCON_SDIVMASK 3
/* DCLKCON register addresses in gpio.h */
#define S3C2410_DCLKCON_DCLK0EN (1<<0)
......@@ -76,32 +69,6 @@
#define S3C2410_CLKSLOW_SLOWVAL(x) (x)
#define S3C2410_CLKSLOW_GET_SLOWVAL(x) ((x) & 7)
#ifndef __ASSEMBLY__
#include <asm/div64.h>
static inline unsigned int
s3c2410_get_pll(unsigned int pllval, unsigned int baseclk)
{
unsigned int mdiv, pdiv, sdiv;
uint64_t fvco;
mdiv = pllval >> S3C2410_PLLCON_MDIVSHIFT;
pdiv = pllval >> S3C2410_PLLCON_PDIVSHIFT;
sdiv = pllval >> S3C2410_PLLCON_SDIVSHIFT;
mdiv &= S3C2410_PLLCON_MDIVMASK;
pdiv &= S3C2410_PLLCON_PDIVMASK;
sdiv &= S3C2410_PLLCON_SDIVMASK;
fvco = (uint64_t)baseclk * (mdiv + 8);
do_div(fvco, (pdiv + 2) << sdiv);
return (unsigned int)fvco;
}
#endif /* __ASSEMBLY__ */
#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
/* extra registers */
......
arch/arm/mach-s3c2410/include/mach/regs-gpio.h
View file @ fdb0a1a6
......@@ -1053,13 +1053,6 @@
#define S3C24XX_EXTINT1 S3C24XX_GPIOREG2(0x8C)
#define S3C24XX_EXTINT2 S3C24XX_GPIOREG2(0x90)
/* values for S3C2410_EXTINT0/1/2 */
#define S3C2410_EXTINT_LOWLEV (0x00)
#define S3C2410_EXTINT_HILEV (0x01)
#define S3C2410_EXTINT_FALLEDGE (0x02)
#define S3C2410_EXTINT_RISEEDGE (0x04)
#define S3C2410_EXTINT_BOTHEDGE (0x06)
/* interrupt filtering conrrol for EINT16..EINT23 */
#define S3C2410_EINFLT0 S3C2410_GPIOREG(0x94)
#define S3C2410_EINFLT1 S3C2410_GPIOREG(0x98)
......
arch/arm/mach-s3c2410/include/mach/spi.h
View file @ fdb0a1a6
......@@ -22,5 +22,12 @@ struct s3c2410_spi_info {
void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol);
};
/* Standard setup / suspend routines for SPI GPIO pins. */
extern void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
int enable);
extern void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
int enable);
#endif /* __ASM_ARCH_SPI_H */
arch/arm/mach-s3c2410/include/mach/tick.h 0 → 100644
View file @ fdb0a1a6
/* linux/arch/arm/mach-s3c2410/include/mach/tick.h
*
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* S3C2410 - timer tick support
*/
#define SRCPND_TIMER4 (1<<(IRQ_TIMER4 - IRQ_EINT0))
static inline int s3c24xx_ostimer_pending(void)
{
return __raw_readl(S3C2410_SRCPND) & SRCPND_TIMER4;
}
arch/arm/mach-s3c2410/include/mach/uncompress.h
View file @ fdb0a1a6
/* arch/arm/mach-s3c2410/include/mach/uncompress.h
*
* Copyright (c) 2003, 2007 Simtec Electronics
......
arch/arm/mach-s3c2410/mach-amlm5900.c
View file @ fdb0a1a6
......@@ -52,6 +52,7 @@
#include <mach/regs-lcd.h>
#include <mach/regs-gpio.h>
#include <plat/iic.h>
#include <plat/devs.h>
#include <plat/cpu.h>
......@@ -150,7 +151,7 @@ static struct platform_device *amlm5900_devices[] __initdata = {
#endif
&s3c_device_adc,
&s3c_device_wdt,
&s3c_device_i2c,
&s3c_device_i2c0,
&s3c_device_usb,
&s3c_device_rtc,
&s3c_device_usbgadget,
......@@ -233,6 +234,7 @@ static void __init amlm5900_init(void)
#ifdef CONFIG_FB_S3C2410
s3c24xx_fb_set_platdata(&amlm5900_fb_info);
#endif
s3c_i2c0_set_platdata(NULL);
platform_add_devices(amlm5900_devices, ARRAY_SIZE(amlm5900_devices));
}
......
arch/arm/mach-s3c2410/mach-bast.c
View file @ fdb0a1a6
......@@ -406,7 +406,7 @@ static struct platform_device bast_sio = {
* standard 100KHz i2c bus frequency
*/
static struct s3c2410_platform_i2c bast_i2c_info = {
static struct s3c2410_platform_i2c __initdata bast_i2c_info = {
.flags = 0,
.slave_addr = 0x10,
.bus_freq = 100*1000,
......@@ -553,7 +553,7 @@ static struct platform_device *bast_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c,
&s3c_device_i2c0,
&s3c_device_rtc,
&s3c_device_nand,
&bast_device_dm9k,
......@@ -588,7 +588,8 @@ static void __init bast_map_io(void)
s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks));
s3c_device_nand.dev.platform_data = &bast_nand_info;
s3c_device_i2c.dev.platform_data = &bast_i2c_info;
s3c_i2c0_set_platdata(&bast_i2c_info);
s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
s3c24xx_init_clocks(0);
......
arch/arm/mach-s3c2410/mach-h1940.c
View file @ fdb0a1a6
......@@ -39,10 +39,12 @@
#include <mach/h1940-latch.h>
#include <mach/fb.h>
#include <plat/udc.h>
#include <plat/iic.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/pll.h>
#include <plat/pm.h>
static struct map_desc h1940_iodesc[] __initdata = {
......@@ -183,7 +185,7 @@ static struct platform_device *h1940_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c,
&s3c_device_i2c0,
&s3c_device_iis,
&s3c_device_usbgadget,
&s3c_device_leds,
......@@ -215,6 +217,7 @@ static void __init h1940_init(void)
s3c24xx_fb_set_platdata(&h1940_fb_info);
s3c24xx_udc_set_platdata(&h1940_udc_cfg);
s3c_i2c0_set_platdata(NULL);
/* Turn off suspend on both USB ports, and switch the
* selectable USB port to USB device mode. */
......@@ -223,10 +226,9 @@ static void __init h1940_init(void)
S3C2410_MISCCR_USBSUSPND0 |
S3C2410_MISCCR_USBSUSPND1, 0x0);
tmp = (
0x78 << S3C2410_PLLCON_MDIVSHIFT)
| (0x02 << S3C2410_PLLCON_PDIVSHIFT)
| (0x03 << S3C2410_PLLCON_SDIVSHIFT);
tmp = (0x78 << S3C24XX_PLLCON_MDIVSHIFT)
| (0x02 << S3C24XX_PLLCON_PDIVSHIFT)
| (0x03 << S3C24XX_PLLCON_SDIVSHIFT);
writel(tmp, S3C2410_UPLLCON);
platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
......
arch/arm/mach-s3c2410/mach-n30.c
View file @ fdb0a1a6
......@@ -17,7 +17,6 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/gpio_keys.h>
#include <linux/init.h>
#include <linux/input.h>
......@@ -320,7 +319,7 @@ static struct s3c2410fb_mach_info n30_fb_info __initdata = {
static struct platform_device *n30_devices[] __initdata = {
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c,
&s3c_device_i2c0,
&s3c_device_iis,
&s3c_device_usb,
&s3c_device_usbgadget,
......@@ -332,7 +331,7 @@ static struct platform_device *n30_devices[] __initdata = {
static struct platform_device *n35_devices[] __initdata = {
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c,
&s3c_device_i2c0,
&s3c_device_iis,
&s3c_device_usbgadget,
&n35_button_device,
......@@ -501,7 +500,7 @@ static void __init n30_init_irq(void)
static void __init n30_init(void)
{
s3c24xx_fb_set_platdata(&n30_fb_info);
s3c_device_i2c.dev.platform_data = &n30_i2ccfg;
s3c_device_i2c0.dev.platform_data = &n30_i2ccfg;
s3c24xx_udc_set_platdata(&n30_udc_cfg);
/* Turn off suspend on both USB ports, and switch the
......
arch/arm/mach-s3c2410/mach-otom.c
View file @ fdb0a1a6
......@@ -35,6 +35,7 @@
#include <plat/s3c2410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/iic.h>
#include <plat/cpu.h>
static struct map_desc otom11_iodesc[] __initdata = {
......@@ -94,7 +95,7 @@ static struct platform_device *otom11_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c,
&s3c_device_i2c0,
&s3c_device_iis,
&s3c_device_rtc,
&otom_device_nor,
......@@ -109,6 +110,7 @@ static void __init otom11_map_io(void)
static void __init otom11_init(void)
{
s3c_i2c0_set_platdata(NULL);
platform_add_devices(otom11_devices, ARRAY_SIZE(otom11_devices));
}
......
arch/arm/mach-s3c2410/mach-qt2410.c
View file @ fdb0a1a6
......@@ -54,6 +54,7 @@
#include <plat/udc.h>
#include <mach/spi.h>
#include <mach/spi-gpio.h>
#include <plat/iic.h>
#include <plat/common-smdk.h>
#include <plat/devs.h>
......@@ -247,7 +248,7 @@ static struct platform_device *qt2410_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c,
&s3c_device_i2c0,
&s3c_device_iis,
&s3c_device_sdi,
&s3c_device_usbgadget,
......@@ -349,6 +350,7 @@ static void __init qt2410_machine_init(void)
s3c2410_gpio_setpin(S3C2410_GPB0, 1);
s3c24xx_udc_set_platdata(&qt2410_udc_cfg);
s3c_i2c0_set_platdata(NULL);
s3c2410_gpio_cfgpin(S3C2410_GPB5, S3C2410_GPIO_OUTPUT);
......
arch/arm/mach-s3c2410/mach-smdk2410.c
View file @ fdb0a1a6
......@@ -47,6 +47,7 @@
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
#include <plat/iic.h>
#include <plat/devs.h>
#include <plat/cpu.h>
......@@ -89,7 +90,7 @@ static struct platform_device *smdk2410_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c,
&s3c_device_i2c0,
&s3c_device_iis,
};
......@@ -102,6 +103,7 @@ static void __init smdk2410_map_io(void)
static void __init smdk2410_init(void)
{
s3c_i2c0_set_platdata(NULL);
platform_add_devices(smdk2410_devices, ARRAY_SIZE(smdk2410_devices));
smdk_machine_init();
}
......
arch/arm/mach-s3c2410/mach-tct_hammer.c
View file @ fdb0a1a6
......@@ -45,6 +45,7 @@
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
#include <plat/iic.h>
#include <plat/devs.h>
#include <plat/cpu.h>
......@@ -127,7 +128,7 @@ static struct s3c2410_uartcfg tct_hammer_uartcfgs[] = {
static struct platform_device *tct_hammer_devices[] __initdata = {
&s3c_device_adc,
&s3c_device_wdt,
&s3c_device_i2c,
&s3c_device_i2c0,
&s3c_device_usb,
&s3c_device_rtc,
&s3c_device_usbgadget,
......@@ -146,6 +147,7 @@ static void __init tct_hammer_map_io(void)
static void __init tct_hammer_init(void)
{
s3c_i2c0_set_platdata(NULL);
platform_add_devices(tct_hammer_devices, ARRAY_SIZE(tct_hammer_devices));
}
......
arch/arm/mach-s3c2410/mach-vr1000.c
View file @ fdb0a1a6
......@@ -47,6 +47,7 @@
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/iic.h>
#include "usb-simtec.h"
#include "nor-simtec.h"
......@@ -334,7 +335,7 @@ static struct platform_device *vr1000_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c,
&s3c_device_i2c0,
&s3c_device_adc,
&serial_device,
&vr1000_dm9k0,
......@@ -384,6 +385,7 @@ static void __init vr1000_map_io(void)
static void __init vr1000_init(void)
{
s3c_i2c0_set_platdata(NULL);
platform_add_devices(vr1000_devices, ARRAY_SIZE(vr1000_devices));
i2c_register_board_info(0, vr1000_i2c_devs,
......
arch/arm/mach-s3c2410/s3c2410.c
View file @ fdb0a1a6
......@@ -16,6 +16,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/sysdev.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
......@@ -28,6 +29,8 @@
#include <mach/hardware.h>
#include <asm/irq.h>
#include <plat/cpu-freq.h>
#include <mach/regs-clock.h>
#include <plat/regs-serial.h>
......@@ -35,6 +38,7 @@
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/clock.h>
#include <plat/pll.h>
/* Initial IO mappings */
......@@ -59,25 +63,28 @@ void __init s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no)
* machine specific initialisation.
*/
void __init s3c2410_map_io(struct map_desc *mach_desc, int mach_size)
void __init s3c2410_map_io(void)
{
/* register our io-tables */
iotable_init(s3c2410_iodesc, ARRAY_SIZE(s3c2410_iodesc));
iotable_init(mach_desc, mach_size);
}
void __init s3c2410_init_clocks(int xtal)
void __init_or_cpufreq s3c2410_setup_clocks(void)
{
struct clk *xtal_clk;
unsigned long tmp;
unsigned long xtal;
unsigned long fclk;
unsigned long hclk;
unsigned long pclk;
xtal_clk = clk_get(NULL, "xtal");
xtal = clk_get_rate(xtal_clk);
clk_put(xtal_clk);
/* now we've got our machine bits initialised, work out what
* clocks we've got */
fclk = s3c2410_get_pll(__raw_readl(S3C2410_MPLLCON), xtal);
fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal);
tmp = __raw_readl(S3C2410_CLKDIVN);
......@@ -95,7 +102,13 @@ void __init s3c2410_init_clocks(int xtal)
* console to use them
*/
s3c24xx_setup_clocks(xtal, fclk, hclk, pclk);
s3c24xx_setup_clocks(fclk, hclk, pclk);
}
void __init s3c2410_init_clocks(int xtal)
{
s3c24xx_register_baseclocks(xtal);
s3c2410_setup_clocks();
s3c2410_baseclk_add();
}
......
arch/arm/mach-s3c2412/clock.c
View file @ fdb0a1a6
......@@ -93,12 +93,6 @@ static int s3c2412_upll_enable(struct clk *clk, int enable)
/* clock selections */
/* CPU EXTCLK input */
static struct clk clk_ext = {
.name = "extclk",
.id = -1,
};
static struct clk clk_erefclk = {
.name = "erefclk",
.id = -1,
......@@ -773,5 +767,6 @@ int __init s3c2412_baseclk_add(void)
s3c2412_clkcon_enable(clkp, 0);
}
s3c_pwmclk_init();
return 0;
}
arch/arm/mach-s3c2412/mach-jive.c
View file @ fdb0a1a6
......@@ -17,7 +17,6 @@
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/sysdev.h>
#include <linux/delay.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
......@@ -53,6 +52,7 @@
#include <plat/cpu.h>
#include <plat/pm.h>
#include <plat/udc.h>
#include <plat/iic.h>
static struct map_desc jive_iodesc[] __initdata = {
};
......@@ -398,11 +398,12 @@ static struct s3c2410_spigpio_info jive_lcd_spi = {
.bus_num = 1,
.pin_clk = S3C2410_GPG8,
.pin_mosi = S3C2410_GPB8,
.num_chipselect = 1,
.chip_select = jive_lcd_spi_chipselect,
};
static struct platform_device jive_device_lcdspi = {
.name = "s3c24xx-spi-gpio",
.name = "spi_s3c24xx_gpio",
.id = 1,
.num_resources = 0,
.dev.platform_data = &jive_lcd_spi,
......@@ -419,11 +420,12 @@ static struct s3c2410_spigpio_info jive_wm8750_spi = {
.bus_num = 2,
.pin_clk = S3C2410_GPB4,
.pin_mosi = S3C2410_GPB9,
.num_chipselect = 1,
.chip_select = jive_wm8750_chipselect,
};
static struct platform_device jive_device_wm8750 = {
.name = "s3c24xx-spi-gpio",
.name = "spi_s3c24xx_gpio",
.id = 2,
.num_resources = 0,
.dev.platform_data = &jive_wm8750_spi,
......@@ -450,14 +452,14 @@ static struct spi_board_info __initdata jive_spi_devs[] = {
/* I2C bus and device configuration. */
static struct s3c2410_platform_i2c jive_i2c_cfg = {
static struct s3c2410_platform_i2c jive_i2c_cfg __initdata = {
.max_freq = 80 * 1000,
.bus_freq = 50 * 1000,
.flags = S3C_IICFLG_FILTER,
.sda_delay = 2,
};
static struct i2c_board_info jive_i2c_devs[] = {
static struct i2c_board_info jive_i2c_devs[] __initdata = {
[0] = {
I2C_BOARD_INFO("lis302dl", 0x1c),
.irq = IRQ_EINT14,
......@@ -470,7 +472,7 @@ static struct platform_device *jive_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_rtc,
&s3c_device_wdt,
&s3c_device_i2c,
&s3c_device_i2c0,
&s3c_device_lcd,
&jive_device_lcdspi,
&jive_device_wm8750,
......@@ -663,7 +665,7 @@ static void __init jive_machine_init(void)
spi_register_board_info(jive_spi_devs, ARRAY_SIZE(jive_spi_devs));
s3c_device_i2c.dev.platform_data = &jive_i2c_cfg;
s3c_i2c0_set_platdata(&jive_i2c_cfg);
i2c_register_board_info(0, jive_i2c_devs, ARRAY_SIZE(jive_i2c_devs));
pm_power_off = jive_power_off;
......
arch/arm/mach-s3c2412/mach-smdk2413.c
View file @ fdb0a1a6
......@@ -38,6 +38,7 @@
#include <mach/idle.h>
#include <plat/udc.h>
#include <plat/iic.h>
#include <mach/fb.h>
#include <plat/s3c2410.h>
......@@ -105,7 +106,7 @@ static struct platform_device *smdk2413_devices[] __initdata = {
&s3c_device_usb,
//&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c,
&s3c_device_i2c0,
&s3c_device_iis,
&s3c_device_usbgadget,
};
......@@ -142,6 +143,7 @@ static void __init smdk2413_machine_init(void)
s3c24xx_udc_set_platdata(&smdk2413_udc_cfg);
s3c_i2c0_set_platdata(NULL);
platform_add_devices(smdk2413_devices, ARRAY_SIZE(smdk2413_devices));
smdk_machine_init();
......
arch/arm/mach-s3c2412/mach-vstms.c
View file @ fdb0a1a6
......@@ -39,6 +39,7 @@
#include <mach/idle.h>
#include <mach/fb.h>
#include <plat/iic.h>
#include <plat/nand.h>
#include <plat/s3c2410.h>
......@@ -122,7 +123,7 @@ static struct s3c2410_platform_nand vstms_nand_info = {
static struct platform_device *vstms_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_wdt,
&s3c_device_i2c,
&s3c_device_i2c0,
&s3c_device_iis,
&s3c_device_rtc,
&s3c_device_nand,
......@@ -151,6 +152,7 @@ static void __init vstms_map_io(void)
static void __init vstms_init(void)
{
s3c_i2c0_set_platdata(NULL);
platform_add_devices(vstms_devices, ARRAY_SIZE(vstms_devices));
}
......
arch/arm/mach-s3c2412/s3c2412.c
View file @ fdb0a1a6
......@@ -16,6 +16,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/sysdev.h>
#include <linux/serial_core.h>
......@@ -33,6 +34,8 @@
#include <mach/reset.h>
#include <mach/idle.h>
#include <plat/cpu-freq.h>
#include <mach/regs-clock.h>
#include <plat/regs-serial.h>
#include <mach/regs-power.h>
......@@ -47,6 +50,7 @@
#include <plat/devs.h>
#include <plat/clock.h>
#include <plat/pm.h>
#include <plat/pll.h>
#ifndef CONFIG_CPU_S3C2412_ONLY
void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO;
......@@ -136,7 +140,7 @@ static void s3c2412_hard_reset(void)
* machine specific initialisation.
*/
void __init s3c2412_map_io(struct map_desc *mach_desc, int mach_size)
void __init s3c2412_map_io(void)
{
/* move base of IO */
......@@ -153,20 +157,25 @@ void __init s3c2412_map_io(struct map_desc *mach_desc, int mach_size)
/* register our io-tables */
iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc));
iotable_init(mach_desc, mach_size);
}
void __init s3c2412_init_clocks(int xtal)
void __init_or_cpufreq s3c2412_setup_clocks(void)
{
struct clk *xtal_clk;
unsigned long tmp;
unsigned long xtal;
unsigned long fclk;
unsigned long hclk;
unsigned long pclk;
xtal_clk = clk_get(NULL, "xtal");
xtal = clk_get_rate(xtal_clk);
clk_put(xtal_clk);
/* now we've got our machine bits initialised, work out what
* clocks we've got */
fclk = s3c2410_get_pll(__raw_readl(S3C2410_MPLLCON), xtal*2);
fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal * 2);
clk_mpll.rate = fclk;
......@@ -183,11 +192,17 @@ void __init s3c2412_init_clocks(int xtal)
printk("S3C2412: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
s3c24xx_setup_clocks(fclk, hclk, pclk);
}
void __init s3c2412_init_clocks(int xtal)
{
/* initialise the clocks here, to allow other things like the
* console to use them
*/
s3c24xx_setup_clocks(xtal, fclk, hclk, pclk);
s3c24xx_register_baseclocks(xtal);
s3c2412_setup_clocks();
s3c2412_baseclk_add();
}
......
arch/arm/mach-s3c2440/Kconfig
View file @ fdb0a1a6
......@@ -29,8 +29,10 @@ menu "S3C2440 Machines"
config MACH_ANUBIS
bool "Simtec Electronics ANUBIS"
select CPU_S3C2440
select S3C24XX_DCLK
select PM_SIMTEC if PM
select HAVE_PATA_PLATFORM
select S3C24XX_GPIO_EXTRA64
help
Say Y here if you are using the Simtec Electronics ANUBIS
development system
......@@ -38,7 +40,9 @@ config MACH_ANUBIS
config MACH_OSIRIS
bool "Simtec IM2440D20 (OSIRIS) module"
select CPU_S3C2440
select S3C24XX_DCLK
select PM_SIMTEC if PM
select S3C24XX_GPIO_EXTRA128
help
Say Y here if you are using the Simtec IM2440D20 module, also
known as the Osiris.
......
arch/arm/mach-s3c2440/mach-anubis.c
View file @ fdb0a1a6
......@@ -40,6 +40,7 @@
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <plat/nand.h>
#include <plat/iic.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
......@@ -366,6 +367,8 @@ static struct sm501_initdata anubis_sm501_initdata = {
.mask = 0,
},
.devices = SM501_USE_GPIO,
/* set the SDRAM and bus clocks */
.mclk = 72 * MHZ,
.m1xclk = 144 * MHZ,
......@@ -373,10 +376,12 @@ static struct sm501_initdata anubis_sm501_initdata = {
static struct sm501_platdata_gpio_i2c anubis_sm501_gpio_i2c[] = {
[0] = {
.bus_num = 1,
.pin_scl = 44,
.pin_sda = 45,
},
[1] = {
.bus_num = 2,
.pin_scl = 40,
.pin_sda = 41,
},
......@@ -384,6 +389,7 @@ static struct sm501_platdata_gpio_i2c anubis_sm501_gpio_i2c[] = {
static struct sm501_platdata anubis_sm501_platdata = {
.init = &anubis_sm501_initdata,
.gpio_base = -1,
.gpio_i2c = anubis_sm501_gpio_i2c,
.gpio_i2c_nr = ARRAY_SIZE(anubis_sm501_gpio_i2c),
};
......@@ -404,7 +410,7 @@ static struct platform_device *anubis_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_wdt,
&s3c_device_adc,
&s3c_device_i2c,
&s3c_device_i2c0,
&s3c_device_rtc,
&s3c_device_nand,
&anubis_device_ide0,
......@@ -468,6 +474,7 @@ static void __init anubis_map_io(void)
static void __init anubis_init(void)
{
s3c_i2c0_set_platdata(NULL);
platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices));
i2c_register_board_info(0, anubis_i2c_devs,
......
arch/arm/mach-s3c2440/mach-at2440evb.c
View file @ fdb0a1a6
......@@ -28,6 +28,7 @@
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/fb.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
......@@ -36,6 +37,7 @@
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <plat/nand.h>
#include <plat/iic.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
......@@ -45,6 +47,7 @@
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <asm/plat-s3c24xx/mci.h>
static struct map_desc at2440evb_iodesc[] __initdata = {
/* Nothing here */
......@@ -162,19 +165,60 @@ static struct platform_device at2440evb_device_eth = {
},
};
static struct s3c24xx_mci_pdata at2440evb_mci_pdata = {
.gpio_detect = S3C2410_GPG10,
};
/* 7" LCD panel */
static struct s3c2410fb_display at2440evb_lcd_cfg __initdata = {
.lcdcon5 = S3C2410_LCDCON5_FRM565 |
S3C2410_LCDCON5_INVVLINE |
S3C2410_LCDCON5_INVVFRAME |
S3C2410_LCDCON5_PWREN |
S3C2410_LCDCON5_HWSWP,
.type = S3C2410_LCDCON1_TFT,
.width = 800,
.height = 480,
.pixclock = 33333, /* HCLK 60 MHz, divisor 2 */
.xres = 800,
.yres = 480,
.bpp = 16,
.left_margin = 88,
.right_margin = 40,
.hsync_len = 128,
.upper_margin = 32,
.lower_margin = 11,
.vsync_len = 2,
};
static struct s3c2410fb_mach_info at2440evb_fb_info __initdata = {
.displays = &at2440evb_lcd_cfg,
.num_displays = 1,
.default_display = 0,
};
static struct platform_device *at2440evb_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_wdt,
&s3c_device_adc,
&s3c_device_i2c,
&s3c_device_i2c0,
&s3c_device_rtc,
&s3c_device_nand,
&s3c_device_sdi,
&s3c_device_lcd,
&at2440evb_device_eth,
};
static void __init at2440evb_map_io(void)
{
s3c_device_nand.dev.platform_data = &at2440evb_nand_info;
s3c_device_sdi.name = "s3c2440-sdi";
s3c_device_sdi.dev.platform_data = &at2440evb_mci_pdata;
s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
s3c24xx_init_clocks(16934400);
......@@ -183,6 +227,9 @@ static void __init at2440evb_map_io(void)
static void __init at2440evb_init(void)
{
s3c24xx_fb_set_platdata(&at2440evb_fb_info);
s3c_i2c0_set_platdata(NULL);
platform_add_devices(at2440evb_devices, ARRAY_SIZE(at2440evb_devices));
}
......
arch/arm/mach-s3c2440/mach-nexcoder.c
View file @ fdb0a1a6
......@@ -37,6 +37,7 @@
//#include <asm/debug-ll.h>
#include <mach/regs-gpio.h>
#include <plat/regs-serial.h>
#include <plat/iic.h>
#include <plat/s3c2410.h>
#include <plat/s3c2440.h>
......@@ -107,7 +108,7 @@ static struct platform_device *nexcoder_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c,
&s3c_device_i2c0,
&s3c_device_iis,
&s3c_device_rtc,
&s3c_device_camif,
......@@ -142,6 +143,7 @@ static void __init nexcoder_map_io(void)
static void __init nexcoder_init(void)
{
s3c_i2c0_set_platdata(NULL);
platform_add_devices(nexcoder_devices, ARRAY_SIZE(nexcoder_devices));
};
......
arch/arm/mach-s3c2440/mach-osiris.c
View file @ fdb0a1a6
......@@ -38,6 +38,7 @@
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <plat/nand.h>
#include <plat/iic.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
......@@ -335,7 +336,7 @@ static struct i2c_board_info osiris_i2c_devs[] __initdata = {
/* Standard Osiris devices */
static struct platform_device *osiris_devices[] __initdata = {
&s3c_device_i2c,
&s3c_device_i2c0,
&s3c_device_wdt,
&s3c_device_nand,
&osiris_pcmcia,
......@@ -398,6 +399,8 @@ static void __init osiris_init(void)
sysdev_class_register(&osiris_pm_sysclass);
sysdev_register(&osiris_pm_sysdev);
s3c_i2c0_set_platdata(NULL);
i2c_register_board_info(0, osiris_i2c_devs,
ARRAY_SIZE(osiris_i2c_devs));
......
arch/arm/mach-s3c2440/mach-rx3715.c
View file @ fdb0a1a6
......@@ -179,7 +179,7 @@ static struct platform_device *rx3715_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c,
&s3c_device_i2c0,
&s3c_device_iis,
&s3c_device_nand,
};
......
arch/arm/mach-s3c2440/mach-smdk2440.c
View file @ fdb0a1a6
......@@ -37,6 +37,7 @@
#include <mach/idle.h>
#include <mach/fb.h>
#include <plat/iic.h>
#include <plat/s3c2410.h>
#include <plat/s3c2440.h>
......@@ -152,7 +153,7 @@ static struct platform_device *smdk2440_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c,
&s3c_device_i2c0,
&s3c_device_iis,
};
......@@ -166,6 +167,7 @@ static void __init smdk2440_map_io(void)
static void __init smdk2440_machine_init(void)
{
s3c24xx_fb_set_platdata(&smdk2440_fb_info);
s3c_i2c0_set_platdata(NULL);
platform_add_devices(smdk2440_devices, ARRAY_SIZE(smdk2440_devices));
smdk_machine_init();
......
arch/arm/mach-s3c2443/Kconfig
View file @ fdb0a1a6
......@@ -24,6 +24,7 @@ config MACH_SMDK2443
bool "SMDK2443"
select CPU_S3C2443
select MACH_SMDK
select S3C_DEV_HSMMC
help
Say Y here if you are using an SMDK2443
......
arch/arm/mach-s3c2443/clock.c
View file @ fdb0a1a6
......@@ -29,7 +29,6 @@
#include <linux/sysdev.h>
#include <linux/clk.h>
#include <linux/mutex.h>
#include <linux/delay.h>
#include <linux/serial_core.h>
#include <linux/io.h>
......@@ -39,6 +38,8 @@
#include <mach/regs-s3c2443-clock.h>
#include <plat/cpu-freq.h>
#include <plat/s3c2443.h>
#include <plat/clock.h>
#include <plat/cpu.h>
......@@ -145,12 +146,6 @@ static unsigned long s3c2443_roundrate_clksrc256(struct clk *clk,
/* clock selections */
/* CPU EXTCLK input */
static struct clk clk_ext = {
.name = "ext",
.id = -1,
};
static struct clk clk_mpllref = {
.name = "mpllref",
.parent = &clk_xtal,
......@@ -165,14 +160,6 @@ static struct clk clk_mpll = {
};
#endif
static struct clk clk_epllref;
static struct clk clk_epll = {
.name = "epll",
.parent = &clk_epllref,
.id = -1,
};
static struct clk clk_i2s_ext = {
.name = "i2s-ext",
.id = -1,
......@@ -1011,22 +998,20 @@ static struct clk *clks[] __initdata = {
&clk_prediv,
};
void __init s3c2443_init_clocks(int xtal)
void __init_or_cpufreq s3c2443_setup_clocks(void)
{
unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON);
unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
struct clk *xtal_clk;
unsigned long xtal;
unsigned long pll;
unsigned long fclk;
unsigned long hclk;
unsigned long pclk;
struct clk *clkp;
int ret;
int ptr;
/* s3c2443 parents h and p clocks from prediv */
clk_h.parent = &clk_prediv;
clk_p.parent = &clk_prediv;
xtal_clk = clk_get(NULL, "xtal");
xtal = clk_get_rate(xtal_clk);
clk_put(xtal_clk);
pll = s3c2443_get_mpll(mpllcon, xtal);
clk_msysclk.rate = pll;
......@@ -1036,13 +1021,29 @@ void __init s3c2443_init_clocks(int xtal)
hclk /= s3c2443_get_hdiv(clkdiv0);
pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1);
s3c24xx_setup_clocks(xtal, fclk, hclk, pclk);
s3c24xx_setup_clocks(fclk, hclk, pclk);
printk("S3C2443: mpll %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n",
(mpllcon & S3C2443_PLLCON_OFF) ? "off":"on",
print_mhz(pll), print_mhz(fclk),
print_mhz(hclk), print_mhz(pclk));
s3c24xx_setup_clocks(fclk, hclk, pclk);
}
void __init s3c2443_init_clocks(int xtal)
{
struct clk *clkp;
unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
int ret;
int ptr;
/* s3c2443 parents h and p clocks from prediv */
clk_h.parent = &clk_prediv;
clk_p.parent = &clk_prediv;
s3c24xx_register_baseclocks(xtal);
s3c2443_setup_clocks();
s3c2443_clk_initparents();
for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
......@@ -1056,7 +1057,7 @@ void __init s3c2443_init_clocks(int xtal)
}
clk_epll.rate = s3c2443_get_epll(epllcon, xtal);
clk_epll.parent = &clk_epllref;
clk_usb_bus.parent = &clk_usb_bus_host;
/* ensure usb bus clock is within correct rate of 48MHz */
......@@ -1105,4 +1106,6 @@ void __init s3c2443_init_clocks(int xtal)
(clkp->enable)(clkp, 0);
}
s3c_pwmclk_init();
}
arch/arm/mach-s3c2443/mach-smdk2443.c
View file @ fdb0a1a6
......@@ -37,6 +37,7 @@
#include <mach/idle.h>
#include <mach/fb.h>
#include <plat/iic.h>
#include <plat/s3c2410.h>
#include <plat/s3c2440.h>
......@@ -103,8 +104,8 @@ static struct s3c2410_uartcfg smdk2443_uartcfgs[] __initdata = {
static struct platform_device *smdk2443_devices[] __initdata = {
&s3c_device_wdt,
&s3c_device_i2c,
&s3c_device_hsmmc,
&s3c_device_i2c0,
&s3c_device_hsmmc0,
};
static void __init smdk2443_map_io(void)
......@@ -116,6 +117,7 @@ static void __init smdk2443_map_io(void)
static void __init smdk2443_machine_init(void)
{
s3c_i2c0_set_platdata(NULL);
platform_add_devices(smdk2443_devices, ARRAY_SIZE(smdk2443_devices));
smdk_machine_init();
}
......
arch/arm/mach-s3c2443/s3c2443.c
View file @ fdb0a1a6
......@@ -81,10 +81,9 @@ void __init s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no)
* machine specific initialisation.
*/
void __init s3c2443_map_io(struct map_desc *mach_desc, int mach_size)
void __init s3c2443_map_io(void)
{
iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc));
iotable_init(mach_desc, mach_size);
}
/* need to register class before we actually register the device, and
......
arch/arm/mach-s3c24a0/include/mach/debug-macro.S 0 → 100644
View file @ fdb0a1a6
/* arch/arm/mach-s3c2410/include/mach/debug-macro.S
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/* pull in the relevant register and map files. */
#include <mach/map.h>
#include <plat/regs-serial.h>
.macro addruart, rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1
ldreq \rx, = S3C24XX_PA_UART
ldrne \rx, = S3C24XX_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0
add \rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
#endif
.endm
/* include the reset of the code which will do the work, we're only
* compiling for a single cpu processor type so the default of s3c2440
* will be fine with us.
*/
#include <plat/debug-macro.S>
arch/arm/mach-s3c24a0/include/mach/irqs.h 0 → 100644
View file @ fdb0a1a6
/* linux/arch/arm/mach-s3c24a0/include/mach/irqs.h
*
* Copyright (c) 2003-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_24A0_IRQS_H
#define __ASM_ARCH_24A0_IRQS_H __FILE__
#define IRQ_EINT0t2 S3C2410_IRQ(0) /* 16 */
/* for generic entry-macro.S */
#define IRQ_EINT0 IRQ_EINT0t2
#define IRQ_EINT3t6 S3C2410_IRQ(1)
#define IRQ_EINT7t10 S3C2410_IRQ(2)
#define IRQ_EINT11t14 S3C2410_IRQ(3)
#define IRQ_EINT15t18 S3C2410_IRQ(4) /* 20 */
#define IRQ_TICK S3C2410_IRQ(5)
#define IRQ_DCTQ S3C2410_IRQ(6)
#define IRQ_MC S3C2410_IRQ(7)
#define IRQ_ME S3C2410_IRQ(8) /* 24 */
#define IRQ_KEYPAD S3C2410_IRQ(9)
#define IRQ_TIMER0 S3C2410_IRQ(10)
#define IRQ_TIMER1 S3C2410_IRQ(11)
#define IRQ_TIMER2 S3C2410_IRQ(12)
#define IRQ_TIMER3_4 S3C2410_IRQ(13)
#define IRQ_OS_TIMER IRQ_TIMER3_4
#define IRQ_LCD S3C2410_IRQ(14)
#define IRQ_CAM_C S3C2410_IRQ(15)
#define IRQ_WDT_BATFLT S3C2410_IRQ(16) /* 32 */
#define IRQ_UART0 S3C2410_IRQ(17)
#define IRQ_CAM_P S3C2410_IRQ(18)
#define IRQ_MODEM S3C2410_IRQ(19)
#define IRQ_DMA S3C2410_IRQ(20)
#define IRQ_SDI S3C2410_IRQ(21)
#define IRQ_SPI0 S3C2410_IRQ(22)
#define IRQ_UART1 S3C2410_IRQ(23)
#define IRQ_AC97_NFLASH S3C2410_IRQ(24) /* 40 */
#define IRQ_USBD S3C2410_IRQ(25)
#define IRQ_USBH S3C2410_IRQ(26)
#define IRQ_IIC S3C2410_IRQ(27)
#define IRQ_IRDA_MSTICK S3C2410_IRQ(28) /* 44 */
#define IRQ_VLX_SPI1 S3C2410_IRQ(29)
#define IRQ_RTC S3C2410_IRQ(30) /* 46 */
#define IRQ_ADC_PEN S3C2410_IRQ(31)
/* interrupts generated from the external interrupts sources */
#define IRQ_EINT00 S3C2410_IRQ(32) /* 48 */
#define IRQ_EINT1 S3C2410_IRQ(33)
#define IRQ_EINT2 S3C2410_IRQ(34)
#define IRQ_EINT3 S3C2410_IRQ(35)
#define IRQ_EINT4 S3C2410_IRQ(36)
#define IRQ_EINT5 S3C2410_IRQ(37)
#define IRQ_EINT6 S3C2410_IRQ(38)
#define IRQ_EINT7 S3C2410_IRQ(39)
#define IRQ_EINT8 S3C2410_IRQ(40)
#define IRQ_EINT9 S3C2410_IRQ(41)
#define IRQ_EINT10 S3C2410_IRQ(42)
#define IRQ_EINT11 S3C2410_IRQ(43)
#define IRQ_EINT12 S3C2410_IRQ(44)
#define IRQ_EINT13 S3C2410_IRQ(45)
#define IRQ_EINT14 S3C2410_IRQ(46)
#define IRQ_EINT15 S3C2410_IRQ(47)
#define IRQ_EINT16 S3C2410_IRQ(48)
#define IRQ_EINT17 S3C2410_IRQ(49)
#define IRQ_EINT18 S3C2410_IRQ(50)
/* SUB IRQS */
#define IRQ_S3CUART_RX0 S3C2410_IRQ(51) /* 67 */
#define IRQ_S3CUART_TX0 S3C2410_IRQ(52)
#define IRQ_S3CUART_ERR0 S3C2410_IRQ(53)
#define IRQ_S3CUART_RX1 S3C2410_IRQ(54)
#define IRQ_S3CUART_TX1 S3C2410_IRQ(55)
#define IRQ_S3CUART_ERR1 S3C2410_IRQ(56)
#define IRQ_S3CUART_RX2 (0x0)
#define IRQ_S3CUART_TX2 (0x0)
#define IRQ_S3CUART_ERR2 (0x0)
#define IRQ_IRDA S3C2410_IRQ(57)
#define IRQ_MSTICK S3C2410_IRQ(58)
#define IRQ_RESERVED0 S3C2410_IRQ(59)
#define IRQ_RESERVED1 S3C2410_IRQ(60)
#define IRQ_RESERVED2 S3C2410_IRQ(61)
#define IRQ_TIMER3 S3C2410_IRQ(62)
#define IRQ_TIMER4 S3C2410_IRQ(63)
#define IRQ_WDT S3C2410_IRQ(64)
#define IRQ_BATFLT S3C2410_IRQ(65)
#define IRQ_POST S3C2410_IRQ(66)
#define IRQ_DISP_FIFO S3C2410_IRQ(67)
#define IRQ_PENUP S3C2410_IRQ(68)
#define IRQ_PENDN S3C2410_IRQ(69)
#define IRQ_ADC S3C2410_IRQ(70)
#define IRQ_DISP_FRAME S3C2410_IRQ(71)
#define IRQ_NFLASH S3C2410_IRQ(72)
#define IRQ_AC97 S3C2410_IRQ(73)
#define IRQ_SPI1 S3C2410_IRQ(74)
#define IRQ_VLX S3C2410_IRQ(75)
#define IRQ_DMA0 S3C2410_IRQ(76)
#define IRQ_DMA1 S3C2410_IRQ(77)
#define IRQ_DMA2 S3C2410_IRQ(78)
#define IRQ_DMA3 S3C2410_IRQ(79)
#define IRQ_TC (0x0)
#define NR_IRQS (IRQ_DMA3+1)
#endif /* __ASM_ARCH_24A0_IRQS_H */
arch/arm/mach-s3c24a0/include/mach/map.h 0 → 100644
View file @ fdb0a1a6
/* linux/arch/arm/mach-s3c24a0/include/mach/map.h
*
* Copyright 2003,2007 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* S3C24A0 - Memory map definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_24A0_MAP_H
#define __ASM_ARCH_24A0_MAP_H __FILE__
#include <plat/map-base.h>
#include <plat/map.h>
#define S3C24A0_PA_IO_BASE (0x40000000)
#define S3C24A0_PA_CLKPWR (0x40000000)
#define S3C24A0_PA_IRQ (0x40200000)
#define S3C24A0_PA_DMA (0x40400000)
#define S3C24A0_PA_MEMCTRL (0x40C00000)
#define S3C24A0_PA_NAND (0x40C00000)
#define S3C24A0_PA_SROM (0x40C20000)
#define S3C24A0_PA_SDRAM (0x40C40000)
#define S3C24A0_PA_BUSM (0x40CE0000)
#define S3C24A0_PA_USBHOST (0x41000000)
#define S3C24A0_PA_MODEMIF (0x41180000)
#define S3C24A0_PA_IRDA (0x41800000)
#define S3C24A0_PA_TIMER (0x44000000)
#define S3C24A0_PA_WATCHDOG (0x44100000)
#define S3C24A0_PA_RTC (0x44200000)
#define S3C24A0_PA_UART (0x44400000)
#define S3C24A0_PA_UART0 (S3C24A0_PA_UART)
#define S3C24A0_PA_UART1 (S3C24A0_PA_UART + 0x4000)
#define S3C24A0_PA_SPI (0x44500000)
#define S3C24A0_PA_IIC (0x44600000)
#define S3C24A0_PA_IIS (0x44700000)
#define S3C24A0_PA_GPIO (0x44800000)
#define S3C24A0_PA_KEYIF (0x44900000)
#define S3C24A0_PA_USBDEV (0x44A00000)
#define S3C24A0_PA_AC97 (0x45000000)
#define S3C24A0_PA_ADC (0x45800000)
#define S3C24A0_PA_SDI (0x46000000)
#define S3C24A0_PA_MS (0x46100000)
#define S3C24A0_PA_LCD (0x4A000000)
#define S3C24A0_PA_VPOST (0x4A100000)
/* physical addresses of all the chip-select areas */
#define S3C24A0_CS0 (0x00000000)
#define S3C24A0_CS1 (0x04000000)
#define S3C24A0_CS2 (0x08000000)
#define S3C24A0_CS3 (0x0C000000)
#define S3C24A0_CS4 (0x10000000)
#define S3C24A0_CS5 (0x40000000)
#define S3C24A0_SDRAM_PA (S3C24A0_CS4)
/* Use a single interface for common resources between S3C24XX cpus */
#define S3C24XX_PA_IRQ S3C24A0_PA_IRQ
#define S3C24XX_PA_MEMCTRL S3C24A0_PA_MEMCTRL
#define S3C24XX_PA_USBHOST S3C24A0_PA_USBHOST
#define S3C24XX_PA_DMA S3C24A0_PA_DMA
#define S3C24XX_PA_CLKPWR S3C24A0_PA_CLKPWR
#define S3C24XX_PA_LCD S3C24A0_PA_LCD
#define S3C24XX_PA_UART S3C24A0_PA_UART
#define S3C24XX_PA_TIMER S3C24A0_PA_TIMER
#define S3C24XX_PA_USBDEV S3C24A0_PA_USBDEV
#define S3C24XX_PA_WATCHDOG S3C24A0_PA_WATCHDOG
#define S3C24XX_PA_IIS S3C24A0_PA_IIS
#define S3C24XX_PA_GPIO S3C24A0_PA_GPIO
#define S3C24XX_PA_RTC S3C24A0_PA_RTC
#define S3C24XX_PA_ADC S3C24A0_PA_ADC
#define S3C24XX_PA_SPI S3C24A0_PA_SPI
#define S3C24XX_PA_SDI S3C24A0_PA_SDI
#define S3C24XX_PA_NAND S3C24A0_PA_NAND
#define S3C_PA_UART S3C24A0_PA_UART
#define S3C_PA_IIC S3C24A0_PA_IIC
#endif /* __ASM_ARCH_24A0_MAP_H */
arch/arm/mach-s3c24a0/include/mach/memory.h 0 → 100644
View file @ fdb0a1a6
/* linux/arch/arm/mach-s3c24a0/include/mach/memory.h
* from linux/include/asm-arm/arch-rpc/memory.h
*
* Copyright (C) 1996,1997,1998 Russell King.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_24A0_MEMORY_H
#define __ASM_ARCH_24A0_MEMORY_H __FILE__
#define PHYS_OFFSET UL(0x10000000)
#define __virt_to_bus(x) __virt_to_phys(x)
#define __bus_to_virt(x) __phys_to_virt(x)
#endif
arch/arm/mach-s3c24a0/include/mach/regs-clock.h 0 → 100644
View file @ fdb0a1a6
/* linux/arch/arm/mach-s3c24a0/include/mach/regs-clock.h
*
* Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* S3C24A0 clock register definitions
*/
#ifndef __ASM_ARCH_24A0_REGS_CLOCK_H
#define __ASM_ARCH_24A0_REGS_CLOCK_H __FILE__
#define S3C24A0_MPLLCON S3C2410_CLKREG(0x10)
#define S3C24A0_UPLLCON S3C2410_CLKREG(0x14)
#define S3C24A0_CLKCON S3C2410_CLKREG(0x20)
#define S3C24A0_CLKSRC S3C2410_CLKREG(0x24)
#define S3C24A0_CLKDIVN S3C2410_CLKREG(0x28)
/* CLKCON register bits */
#define S3C24A0_CLKCON_VLX (1<<29)
#define S3C24A0_CLKCON_VPOST (1<<28)
#define S3C24A0_CLKCON_WDT (1<<27) /* reserved */
#define S3C24A0_CLKCON_MPEGDCTQ (1<<26)
#define S3C24A0_CLKCON_VPOSTIF (1<<25)
#define S3C24A0_CLKCON_MPEG4IF (1<<24)
#define S3C24A0_CLKCON_CAM_UPLL (1<<23)
#define S3C24A0_CLKCON_LCDC (1<<22)
#define S3C24A0_CLKCON_CAM_HCLK (1<<21)
#define S3C24A0_CLKCON_MPEG4 (1<<20)
#define S3C24A0_CLKCON_KEYPAD (1<<19)
#define S3C24A0_CLKCON_ADC (1<<18)
#define S3C24A0_CLKCON_SDI (1<<17)
#define S3C24A0_CLKCON_MS (1<<16) /* memory stick */
#define S3C24A0_CLKCON_USBD (1<<15)
#define S3C24A0_CLKCON_GPIO (1<<14)
#define S3C24A0_CLKCON_IIS (1<<13)
#define S3C24A0_CLKCON_IIC (1<<12)
#define S3C24A0_CLKCON_SPI (1<<11)
#define S3C24A0_CLKCON_UART1 (1<<10)
#define S3C24A0_CLKCON_UART0 (1<<9)
#define S3C24A0_CLKCON_PWMT (1<<8)
#define S3C24A0_CLKCON_USBH (1<<7)
#define S3C24A0_CLKCON_AC97 (1<<6)
#define S3C24A0_CLKCON_IrDA (1<<4)
#define S3C24A0_CLKCON_IDLE (1<<2)
#define S3C24A0_CLKCON_MON (1<<1)
#define S3C24A0_CLKCON_STOP (1<<0)
/* CLKSRC register bits */
#define S3C24A0_CLKSRC_OSC (1<<8) /* CLKSRC */
#define S3C24A0_CLKSRC_UPLL (1<<7)
#define S3C24A0_CLKSRC_MPLL (1<<5)
#define S3C24A0_CLKSRC_EXT (1<<4)
/* Use a single interface with the common code, for s3c24xx */
#define S3C2410_MPLLCON S3C24A0_MPLLCON
#define S3C2410_UPLLCON S3C24A0_UPLLCON
#define S3C2410_CLKCON S3C24A0_CLKCON
#define S3C2410_CLKSLOW S3C24A0_CLKSRC
#define S3C2410_CLKDIVN S3C24A0_CLKDIVN
#define S3C2410_CLKCON_IDLE S3C24A0_CLKCON_IDLE
#define S3C2410_CLKCON_POWER S3C24A0_CLKCON_STOP
#define S3C2410_CLKCON_LCDC S3C24A0_CLKCON_LCDC
#define S3C2410_CLKCON_USBH S3C24A0_CLKCON_USBH
#define S3C2410_CLKCON_USBD S3C24A0_CLKCON_USBD
#define S3C2410_CLKCON_PWMT S3C24A0_CLKCON_PWMT
#define S3C2410_CLKCON_SDI S3C24A0_CLKCON_SDI
#define S3C2410_CLKCON_UART0 S3C24A0_CLKCON_UART0
#define S3C2410_CLKCON_UART1 S3C24A0_CLKCON_UART1
#define S3C2410_CLKCON_GPIO S3C24A0_CLKCON_GPIO
#define S3C2410_CLKCON_ADC S3C24A0_CLKCON_ADC
#define S3C2410_CLKCON_IIC S3C24A0_CLKCON_IIC
#define S3C2410_CLKCON_IIS S3C24A0_CLKCON_IIS
#define S3C2410_CLKCON_SPI S3C24A0_CLKCON_SPI
#define S3C2410_CLKSLOW_UCLK_OFF S3C24A0_CLKSRC_UPLL
#define S3C2410_CLKSLOW_MPLL_OFF S3C24A0_CLKSRC_MPLL
#define S3C2410_CLKSLOW_SLOW (0xFF)
#define S3C2410_CLKSLOW_GET_SLOWVAL(x) (0x1)
#endif /* __ASM_ARCH_24A0_REGS_CLOCK_H */
arch/arm/mach-s3c24a0/include/mach/regs-irq.h 0 → 100644
View file @ fdb0a1a6
/* linux/arch/arm/mach-s3c24a0/include/mach/regs-irq.h
*
* Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
* http://www.simtec.co.uk/products/SWLINUX/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef ___ASM_ARCH_24A0_REGS_IRQ_H
#define ___ASM_ARCH_24A0_REGS_IRQ_H __FILE__
#define S3C2410_EINTMASK S3C2410_EINTREG(0x034)
#define S3C2410_EINTPEND S3C2410_EINTREG(0X038)
#define S3C24XX_EINTMASK S3C24XX_EINTREG(0x034)
#define S3C24XX_EINTPEND S3C24XX_EINTREG(0X038)
#endif /* __ASM_ARCH_24A0_REGS_IRQ_H */
arch/arm/mach-s3c24a0/include/mach/system.h 0 → 100644
View file @ fdb0a1a6
/* linux/arch/arm/mach-s3c24a0/include/mach/system.h
*
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C24A0 - System function defines and includes
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <mach/hardware.h>
#include <asm/io.h>
#include <mach/map.h>
static void arch_idle(void)
{
/* currently no specific idle support. */
}
void (*s3c24xx_reset_hook)(void);
#include <asm/plat-s3c24xx/system-reset.h>
arch/arm/mach-s3c24a0/include/mach/tick.h 0 → 100644
View file @ fdb0a1a6
/* linux/arch/arm/mach-s3c24a0/include/mach/tick.h
*
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* S3C24A0 - timer tick support
*/
#define SUBSRC_TIMER4 (1 << (IRQ_TIMER4 - IRQ_S3CUART_RX0))
static inline int s3c24xx_ostimer_pending(void)
{
return __raw_readl(S3C2410_SUBSRCPND) & SUBSRC_TIMER4;
}
arch/arm/mach-s3c24a0/include/mach/timex.h 0 → 100644
View file @ fdb0a1a6
/* linux/arch/arm/mach-s3c24a0/include/mach/timex.h
*
* Copyright (c) 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 - time parameters
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_TIMEX_H
#define __ASM_ARCH_TIMEX_H
#define CLOCK_TICK_RATE 12000000
#endif /* __ASM_ARCH_TIMEX_H */
arch/arm/mach-s3c24a0/include/mach/vmalloc.h 0 → 100644
View file @ fdb0a1a6
/* linux/include/asm-arm/arch-s3c24ao/vmalloc.h
*
* Copyright 2008 Simtec Electronics <linux@simtec.co.uk>
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* S3C24A0 vmalloc definition
*/
#ifndef __ASM_ARCH_VMALLOC_H
#define __ASM_ARCH_VMALLOC_H
#define VMALLOC_END (0xE0000000)
#endif /* __ASM_ARCH_VMALLOC_H */
arch/arm/mach-s3c6400/Kconfig 0 → 100644
View file @ fdb0a1a6
# arch/arm/mach-s3c6400/Kconfig
#
# Copyright 2008 Openmoko, Inc.
# Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
#
# Licensed under GPLv2
# Currently nothing here, this will be added later
arch/arm/mach-s3c6400/Makefile 0 → 100644
View file @ fdb0a1a6
# arch/arm/mach-s3c6400/Makefile
#
# Copyright 2008 Openmoko, Inc.
# Copyright 2008 Simtec Electronics
#
# Licensed under GPLv2
obj-y :=
obj-m :=
obj-n :=
obj- :=
# Core support for S3C6400 system
obj-n += blank.o
arch/arm/mach-s3c6400/Makefile.boot 0 → 100644
View file @ fdb0a1a6
zreladdr-y := 0x50008000
params_phys-y := 0x50000100
arch/arm/mach-s3c6400/include/mach/debug-macro.S 0 → 100644
View file @ fdb0a1a6
/* arch/arm/mach-s3c6400/include/mach/debug-macro.S
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/* pull in the relevant register and map files. */
#include <mach/map.h>
#include <plat/regs-serial.h>
/* note, for the boot process to work we have to keep the UART
* virtual address aligned to an 1MiB boundary for the L1
* mapping the head code makes. We keep the UART virtual address
* aligned and add in the offset when we load the value here.
*/
.macro addruart, rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1
ldreq \rx, = S3C_PA_UART
ldrne \rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
#if CONFIG_DEBUG_S3C_UART != 0
add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
#endif
.endm
/* include the reset of the code which will do the work, we're only
* compiling for a single cpu processor type so the default of s3c2440
* will be fine with us.
*/
#include <plat/debug-macro.S>
arch/arm/mach-s3c6400/include/mach/dma.h 0 → 100644
View file @ fdb0a1a6
/* linux/arch/arm/mach-s3c6400/include/mach/dma.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* S3C6400 - DMA support
*/
#ifndef __ASM_ARCH_DMA_H
#define __ASM_ARCH_DMA_H __FILE__
/* currently nothing here, placeholder */
#endif /* __ASM_ARCH_IRQ_H */
arch/arm/mach-s3c6400/include/mach/entry-macro.S 0 → 100644
View file @ fdb0a1a6
/* arch/arm/mach-s3c6400/include/mach/entry-macro.S
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* Low-level IRQ helper macros for the Samsung S3C64XX series
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <asm/hardware/vic.h>
#include <mach/map.h>
#include <plat/irqs.h>
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =S3C_VA_VIC0
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
@ check the vic0
mov \irqnr, # S3C_IRQ_OFFSET + 31
ldr \irqstat, [ \base, # VIC_IRQ_STATUS ]
teq \irqstat, #0
@ otherwise try vic1
addeq \tmp, \base, #(S3C_VA_VIC1 - S3C_VA_VIC0)
addeq \irqnr, \irqnr, #32
ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
teqeq \irqstat, #0
clzne \irqstat, \irqstat
subne \irqnr, \irqnr, \irqstat
.endm
arch/arm/mach-s3c6400/include/mach/gpio-core.h 0 → 100644
View file @ fdb0a1a6
/* arch/arm/mach-s3c6400/include/mach/gpio-core.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* S3C64XX - GPIO core support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_GPIO_CORE_H
#define __ASM_ARCH_GPIO_CORE_H __FILE__
/* currently we just include the platform support */
#include <plat/gpio-core.h>
#endif /* __ASM_ARCH_GPIO_CORE_H */
arch/arm/mach-s3c6400/include/mach/gpio.h 0 → 100644
View file @ fdb0a1a6
/* arch/arm/mach-s3c6400/include/mach/gpio.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* S3C6400 - GPIO lib support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#define gpio_get_value __gpio_get_value
#define gpio_set_value __gpio_set_value
#define gpio_cansleep __gpio_cansleep
#define gpio_to_irq __gpio_to_irq
/* GPIO bank sizes */
#define S3C64XX_GPIO_A_NR (8)
#define S3C64XX_GPIO_B_NR (7)
#define S3C64XX_GPIO_C_NR (8)
#define S3C64XX_GPIO_D_NR (5)
#define S3C64XX_GPIO_E_NR (5)
#define S3C64XX_GPIO_F_NR (16)
#define S3C64XX_GPIO_G_NR (7)
#define S3C64XX_GPIO_H_NR (10)
#define S3C64XX_GPIO_I_NR (16)
#define S3C64XX_GPIO_J_NR (12)
#define S3C64XX_GPIO_K_NR (16)
#define S3C64XX_GPIO_L_NR (15)
#define S3C64XX_GPIO_M_NR (6)
#define S3C64XX_GPIO_N_NR (16)
#define S3C64XX_GPIO_O_NR (16)
#define S3C64XX_GPIO_P_NR (15)
#define S3C64XX_GPIO_Q_NR (9)
/* GPIO bank numbes */
/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
* space for debugging purposes so that any accidental
* change from one gpio bank to another can be caught.
*/
#define S3C64XX_GPIO_NEXT(__gpio) \
((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
enum s3c_gpio_number {
S3C64XX_GPIO_A_START = 0,
S3C64XX_GPIO_B_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_A),
S3C64XX_GPIO_C_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_B),
S3C64XX_GPIO_D_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_C),
S3C64XX_GPIO_E_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_D),
S3C64XX_GPIO_F_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_E),
S3C64XX_GPIO_G_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_F),
S3C64XX_GPIO_H_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_G),
S3C64XX_GPIO_I_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_H),
S3C64XX_GPIO_J_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_I),
S3C64XX_GPIO_K_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_J),
S3C64XX_GPIO_L_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_K),
S3C64XX_GPIO_M_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_L),
S3C64XX_GPIO_N_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_M),
S3C64XX_GPIO_O_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_N),
S3C64XX_GPIO_P_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_O),
S3C64XX_GPIO_Q_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_P),
};
/* S3C64XX GPIO number definitions. */
#define S3C64XX_GPA(_nr) (S3C64XX_GPIO_A_START + (_nr))
#define S3C64XX_GPB(_nr) (S3C64XX_GPIO_B_START + (_nr))
#define S3C64XX_GPC(_nr) (S3C64XX_GPIO_C_START + (_nr))
#define S3C64XX_GPD(_nr) (S3C64XX_GPIO_D_START + (_nr))
#define S3C64XX_GPE(_nr) (S3C64XX_GPIO_E_START + (_nr))
#define S3C64XX_GPF(_nr) (S3C64XX_GPIO_F_START + (_nr))
#define S3C64XX_GPG(_nr) (S3C64XX_GPIO_G_START + (_nr))
#define S3C64XX_GPH(_nr) (S3C64XX_GPIO_H_START + (_nr))
#define S3C64XX_GPI(_nr) (S3C64XX_GPIO_I_START + (_nr))
#define S3C64XX_GPJ(_nr) (S3C64XX_GPIO_J_START + (_nr))
#define S3C64XX_GPK(_nr) (S3C64XX_GPIO_K_START + (_nr))
#define S3C64XX_GPL(_nr) (S3C64XX_GPIO_L_START + (_nr))
#define S3C64XX_GPM(_nr) (S3C64XX_GPIO_M_START + (_nr))
#define S3C64XX_GPN(_nr) (S3C64XX_GPIO_N_START + (_nr))
#define S3C64XX_GPO(_nr) (S3C64XX_GPIO_O_START + (_nr))
#define S3C64XX_GPP(_nr) (S3C64XX_GPIO_P_START + (_nr))
#define S3C64XX_GPQ(_nr) (S3C64XX_GPIO_Q_START + (_nr))
/* the end of the S3C64XX specific gpios */
#define S3C64XX_GPIO_END (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
#define S3C_GPIO_END S3C64XX_GPIO_END
/* define the number of gpios we need to the one after the GPQ() range */
#define ARCH_NR_GPIOS (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
#include <asm-generic/gpio.h>
arch/arm/mach-s3c6400/include/mach/hardware.h 0 → 100644
View file @ fdb0a1a6
/* linux/arch/arm/mach-s3c6400/include/mach/hardware.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* S3C6400 - Hardware support
*/
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H __FILE__
/* currently nothing here, placeholder */
#endif /* __ASM_ARCH_IRQ_H */
arch/arm/mach-s3c6400/include/mach/irqs.h 0 → 100644
View file @ fdb0a1a6
/* linux/arch/arm/mach-s3c6400/include/mach/irqs.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* S3C6400 - IRQ definitions
*/
#ifndef __ASM_ARCH_IRQS_H
#define __ASM_ARCH_IRQS_H __FILE__
#ifndef __ASM_ARM_IRQ_H
#error "Do not include this directly, instead #include <asm/irq.h>"
#endif
#include <plat/irqs.h>
#endif /* __ASM_ARCH_IRQ_H */
arch/arm/mach-s3c6400/include/mach/map.h 0 → 100644
View file @ fdb0a1a6
/* linux/arch/arm/mach-s3c6400/include/mach/map.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* S3C64XX - Memory map definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_MAP_H
#define __ASM_ARCH_MAP_H __FILE__
#include <plat/map-base.h>
/* HSMMC units */
#define S3C64XX_PA_HSMMC(x) (0x7C200000 + ((x) * 0x100000))
#define S3C64XX_PA_HSMMC0 S3C64XX_PA_HSMMC(0)
#define S3C64XX_PA_HSMMC1 S3C64XX_PA_HSMMC(1)
#define S3C64XX_PA_HSMMC2 S3C64XX_PA_HSMMC(2)
#define S3C_PA_UART (0x7F005000)
#define S3C_PA_UART0 (S3C_PA_UART + 0x00)
#define S3C_PA_UART1 (S3C_PA_UART + 0x400)
#define S3C_PA_UART2 (S3C_PA_UART + 0x800)
#define S3C_PA_UART3 (S3C_PA_UART + 0xC00)
#define S3C_UART_OFFSET (0x400)
/* See notes on UART VA mapping in debug-macro.S */
#define S3C_VA_UARTx(x) (S3C_VA_UART + (S3C_PA_UART & 0xfffff) + ((x) * S3C_UART_OFFSET))
#define S3C_VA_UART0 S3C_VA_UARTx(0)
#define S3C_VA_UART1 S3C_VA_UARTx(1)
#define S3C_VA_UART2 S3C_VA_UARTx(2)
#define S3C_VA_UART3 S3C_VA_UARTx(3)
#define S3C64XX_PA_FB (0x77100000)
#define S3C64XX_PA_SYSCON (0x7E00F000)
#define S3C64XX_PA_TIMER (0x7F006000)
#define S3C64XX_PA_IIC0 (0x7F004000)
#define S3C64XX_PA_IIC1 (0x7F00F000)
#define S3C64XX_PA_GPIO (0x7F008000)
#define S3C64XX_VA_GPIO S3C_ADDR(0x00500000)
#define S3C64XX_SZ_GPIO SZ_4K
#define S3C64XX_PA_SDRAM (0x50000000)
#define S3C64XX_PA_VIC0 (0x71200000)
#define S3C64XX_PA_VIC1 (0x71300000)
/* place VICs close together */
#define S3C_VA_VIC0 (S3C_VA_IRQ + 0x00)
#define S3C_VA_VIC1 (S3C_VA_IRQ + 0x10000)
/* compatibiltiy defines. */
#define S3C_PA_TIMER S3C64XX_PA_TIMER
#define S3C_PA_HSMMC0 S3C64XX_PA_HSMMC0
#define S3C_PA_HSMMC1 S3C64XX_PA_HSMMC1
#define S3C_PA_HSMMC2 S3C64XX_PA_HSMMC2
#define S3C_PA_IIC S3C64XX_PA_IIC0
#define S3C_PA_IIC1 S3C64XX_PA_IIC1
#define S3C_PA_FB S3C64XX_PA_FB
#endif /* __ASM_ARCH_6400_MAP_H */
arch/arm/mach-s3c6400/include/mach/memory.h 0 → 100644
View file @ fdb0a1a6
/* arch/arm/mach-s3c6400/include/mach/memory.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#define PHYS_OFFSET UL(0x50000000)
#endif
arch/arm/mach-s3c6400/include/mach/pwm-clock.h 0 → 100644
View file @ fdb0a1a6
/* linux/arch/arm/mach-s3c6400/include/mach/pwm-clock.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* S3C64xx - pwm clock and timer support
*/
/**
* pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
* @tcfg: The timer TCFG1 register bits shifted down to 0.
*
* Return true if the given configuration from TCFG1 is a TCLK instead
* any of the TDIV clocks.
*/
static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
{
return tcfg >= S3C64XX_TCFG1_MUX_TCLK;
}
/**
* tcfg_to_divisor() - convert tcfg1 setting to a divisor
* @tcfg1: The tcfg1 setting, shifted down.
*
* Get the divisor value for the given tcfg1 setting. We assume the
* caller has already checked to see if this is not a TCLK source.
*/
static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
{
return 1 << tcfg1;
}
/**
* pwm_tdiv_has_div1() - does the tdiv setting have a /1
*
* Return true if we have a /1 in the tdiv setting.
*/
static inline unsigned int pwm_tdiv_has_div1(void)
{
return 1;
}
/**
* pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
* @div: The divisor to calculate the bit information for.
*
* Turn a divisor into the necessary bit field for TCFG1.
*/
static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
{
return ilog2(div);
}
#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
arch/arm/mach-s3c6400/include/mach/regs-fb.h 0 → 100644
View file @ fdb0a1a6
/* arch/arm/mach-s3c6400/include/mach/regs-fb.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* S3C64XX - new-style framebuffer register definitions
*
* This is the register set for the new style framebuffer interface
* found from the S3C2443 onwards and specifically the S3C64XX series
* S3C6400 and S3C6410.
*
* The file contains the cpu specific items which change between whichever
* architecture is selected. See <plat/regs-fb.h> for the core definitions
* that are the same.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/* include the core definitions here, in case we really do need to
* override them at a later date.
*/
#include <plat/regs-fb.h>
#define S3C_FB_MAX_WIN (5) /* number of hardware windows available. */
#define VIDCON1_FSTATUS_EVEN (1 << 15)
/* Video timing controls */
#define VIDTCON0 (0x10)
#define VIDTCON1 (0x14)
#define VIDTCON2 (0x18)
/* Window position controls */
#define WINCON(_win) (0x20 + ((_win) * 4))
/* OSD1 and OSD4 do not have register D */
#define VIDOSD_A(_win) (0x40 + ((_win) * 16))
#define VIDOSD_B(_win) (0x44 + ((_win) * 16))
#define VIDOSD_C(_win) (0x48 + ((_win) * 16))
#define VIDOSD_D(_win) (0x4C + ((_win) * 16))
/* Video buffer addresses */
#define VIDW_BUF_START(_buff) (0xA0 + ((_buff) * 8))
#define VIDW_BUF_START1(_buff) (0xA4 + ((_buff) * 8))
#define VIDW_BUF_END(_buff) (0xD0 + ((_buff) * 8))
#define VIDW_BUF_END1(_buff) (0xD4 + ((_buff) * 8))
#define VIDW_BUF_SIZE(_buff) (0x100 + ((_buff) * 4))
#define VIDINTCON0 (0x130)
#define WxKEYCONy(_win, _con) ((0x140 + ((_win) * 8)) + ((_con) * 4))
/* WINCONx */
#define WINCONx_CSCWIDTH_MASK (0x3 << 26)
#define WINCONx_CSCWIDTH_SHIFT (26)
#define WINCONx_CSCWIDTH_WIDE (0x0 << 26)
#define WINCONx_CSCWIDTH_NARROW (0x3 << 26)
#define WINCONx_ENLOCAL (1 << 22)
#define WINCONx_BUFSTATUS (1 << 21)
#define WINCONx_BUFSEL (1 << 20)
#define WINCONx_BUFAUTOEN (1 << 19)
#define WINCONx_YCbCr (1 << 13)
#define WINCON1_LOCALSEL_CAMIF (1 << 23)
#define WINCON2_LOCALSEL_CAMIF (1 << 23)
#define WINCON2_BLD_PIX (1 << 6)
#define WINCON2_ALPHA_SEL (1 << 1)
#define WINCON2_BPPMODE_MASK (0xf << 2)
#define WINCON2_BPPMODE_SHIFT (2)
#define WINCON2_BPPMODE_1BPP (0x0 << 2)
#define WINCON2_BPPMODE_2BPP (0x1 << 2)
#define WINCON2_BPPMODE_4BPP (0x2 << 2)
#define WINCON2_BPPMODE_8BPP_1232 (0x4 << 2)
#define WINCON2_BPPMODE_16BPP_565 (0x5 << 2)
#define WINCON2_BPPMODE_16BPP_A1555 (0x6 << 2)
#define WINCON2_BPPMODE_16BPP_I1555 (0x7 << 2)
#define WINCON2_BPPMODE_18BPP_666 (0x8 << 2)
#define WINCON2_BPPMODE_18BPP_A1665 (0x9 << 2)
#define WINCON2_BPPMODE_19BPP_A1666 (0xa << 2)
#define WINCON2_BPPMODE_24BPP_888 (0xb << 2)
#define WINCON2_BPPMODE_24BPP_A1887 (0xc << 2)
#define WINCON2_BPPMODE_25BPP_A1888 (0xd << 2)
#define WINCON2_BPPMODE_28BPP_A4888 (0xd << 2)
#define WINCON3_BLD_PIX (1 << 6)
#define WINCON3_ALPHA_SEL (1 << 1)
#define WINCON3_BPPMODE_MASK (0xf << 2)
#define WINCON3_BPPMODE_SHIFT (2)
#define WINCON3_BPPMODE_1BPP (0x0 << 2)
#define WINCON3_BPPMODE_2BPP (0x1 << 2)
#define WINCON3_BPPMODE_4BPP (0x2 << 2)
#define WINCON3_BPPMODE_16BPP_565 (0x5 << 2)
#define WINCON3_BPPMODE_16BPP_A1555 (0x6 << 2)
#define WINCON3_BPPMODE_16BPP_I1555 (0x7 << 2)
#define WINCON3_BPPMODE_18BPP_666 (0x8 << 2)
#define WINCON3_BPPMODE_18BPP_A1665 (0x9 << 2)
#define WINCON3_BPPMODE_19BPP_A1666 (0xa << 2)
#define WINCON3_BPPMODE_24BPP_888 (0xb << 2)
#define WINCON3_BPPMODE_24BPP_A1887 (0xc << 2)
#define WINCON3_BPPMODE_25BPP_A1888 (0xd << 2)
#define WINCON3_BPPMODE_28BPP_A4888 (0xd << 2)
#define VIDINTCON0_FIFIOSEL_WINDOW2 (0x10 << 5)
#define VIDINTCON0_FIFIOSEL_WINDOW3 (0x20 << 5)
#define VIDINTCON0_FIFIOSEL_WINDOW4 (0x40 << 5)
#define DITHMODE (0x170)
#define WINxMAP(_win) (0x180 + ((_win) * 4))
#define DITHMODE_R_POS_MASK (0x3 << 5)
#define DITHMODE_R_POS_SHIFT (5)
#define DITHMODE_R_POS_8BIT (0x0 << 5)
#define DITHMODE_R_POS_6BIT (0x1 << 5)
#define DITHMODE_R_POS_5BIT (0x2 << 5)
#define DITHMODE_G_POS_MASK (0x3 << 3)
#define DITHMODE_G_POS_SHIFT (3)
#define DITHMODE_G_POS_8BIT (0x0 << 3)
#define DITHMODE_G_POS_6BIT (0x1 << 3)
#define DITHMODE_G_POS_5BIT (0x2 << 3)
#define DITHMODE_B_POS_MASK (0x3 << 1)
#define DITHMODE_B_POS_SHIFT (1)
#define DITHMODE_B_POS_8BIT (0x0 << 1)
#define DITHMODE_B_POS_6BIT (0x1 << 1)
#define DITHMODE_B_POS_5BIT (0x2 << 1)
#define DITHMODE_DITH_EN (1 << 0)
#define WPALCON (0x1A0)
#define WPALCON_W4PAL_16BPP_A555 (1 << 8)
#define WPALCON_W3PAL_16BPP_A555 (1 << 7)
#define WPALCON_W2PAL_16BPP_A555 (1 << 6)
/* Palette registers */
#define WIN2_PAL(_entry) (0x300 + ((_entry) * 2))
#define WIN3_PAL(_entry) (0x320 + ((_entry) * 2))
#define WIN4_PAL(_entry) (0x340 + ((_entry) * 2))
#define WIN0_PAL(_entry) (0x400 + ((_entry) * 4))
#define WIN1_PAL(_entry) (0x800 + ((_entry) * 4))
/* system specific implementation code for palette sizes, and other
* information that changes depending on which architecture is being
* compiled.
*/
/* return true if window _win has OSD register D */
#define s3c_fb_has_osd_d(_win) ((_win) != 4 && (_win) != 0)
static inline unsigned int s3c_fb_win_pal_size(unsigned int win)
{
if (win < 2)
return 256;
if (win < 4)
return 16;
if (win == 4)
return 4;
BUG(); /* shouldn't get here */
}
static inline int s3c_fb_validate_win_bpp(unsigned int win, unsigned int bpp)
{
/* all windows can do 1/2 bpp */
if ((bpp == 25 || bpp == 19) && win == 0)
return 0; /* win 0 does not have 19 or 25bpp modes */
if (bpp == 4 && win == 4)
return 0;
if (bpp == 8 && (win >= 3))
return 0; /* win 3/4 cannot do 8bpp in any mode */
return 1;
}
static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg)
{
switch (window) {
case 0: return WIN0_PAL(reg);
case 1: return WIN1_PAL(reg);
case 2: return WIN2_PAL(reg);
case 3: return WIN3_PAL(reg);
case 4: return WIN4_PAL(reg);
}
BUG();
}
static inline int s3c_fb_pal_is16(unsigned int window)
{
return window > 1;
}
struct s3c_fb_palette {
struct fb_bitfield r;
struct fb_bitfield g;
struct fb_bitfield b;
struct fb_bitfield a;
};
static inline void s3c_fb_init_palette(unsigned int window,
struct s3c_fb_palette *palette)
{
if (window < 2) {
/* Windows 0/1 are 8/8/8 or A/8/8/8 */
palette->r.offset = 16;
palette->r.length = 8;
palette->g.offset = 8;
palette->g.length = 8;
palette->b.offset = 0;
palette->b.length = 8;
} else {
/* currently we assume RGB 5/6/5 */
palette->r.offset = 11;
palette->r.length = 5;
palette->g.offset = 5;
palette->g.length = 6;
palette->b.offset = 0;
palette->b.length = 5;
}
}
/* Notes on per-window bpp settings
*
* Value Win0 Win1 Win2 Win3 Win 4
* 0000 1(P) 1(P) 1(P) 1(P) 1(P)
* 0001 2(P) 2(P) 2(P) 2(P) 2(P)
* 0010 4(P) 4(P) 4(P) 4(P) -none-
* 0011 8(P) 8(P) -none- -none- -none-
* 0100 -none- 8(A232) 8(A232) -none- -none-
* 0101 16(565) 16(565) 16(565) 16(565) 16(565)
* 0110 -none- 16(A555) 16(A555) 16(A555) 16(A555)
* 0111 16(I555) 16(I565) 16(I555) 16(I555) 16(I555)
* 1000 18(666) 18(666) 18(666) 18(666) 18(666)
* 1001 -none- 18(A665) 18(A665) 18(A665) 16(A665)
* 1010 -none- 19(A666) 19(A666) 19(A666) 19(A666)
* 1011 24(888) 24(888) 24(888) 24(888) 24(888)
* 1100 -none- 24(A887) 24(A887) 24(A887) 24(A887)
* 1101 -none- 25(A888) 25(A888) 25(A888) 25(A888)
* 1110 -none- -none- -none- -none- -none-
* 1111 -none- -none- -none- -none- -none-
*/
arch/arm/mach-s3c6400/include/mach/regs-irq.h 0 → 100644
View file @ fdb0a1a6
/* linux/arch/arm/mach-s3c6400/include/mach/regs-irq.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* S3C64XX - IRQ register definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_REGS_IRQ_H
#define __ASM_ARCH_REGS_IRQ_H __FILE__
#include <asm/hardware/vic.h>
#endif /* __ASM_ARCH_6400_REGS_IRQ_H */
arch/arm/mach-s3c6400/include/mach/system.h 0 → 100644
View file @ fdb0a1a6
/* linux/arch/arm/mach-s3c6400/include/mach/system.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* S3C6400 - system implementation
*/
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H __FILE__
static void arch_idle(void)
{
/* nothing here yet */
}
static void arch_reset(char mode)
{
/* nothing here yet */
}
#endif /* __ASM_ARCH_IRQ_H */
arch/arm/mach-s3c6400/include/mach/tick.h 0 → 100644
View file @ fdb0a1a6
/* linux/arch/arm/mach-s3c6400/include/mach/tick.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* S3C64XX - Timer tick support definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_TICK_H
#define __ASM_ARCH_TICK_H __FILE__
/* note, the timer interrutps turn up in 2 places, the vic and then
* the timer block. We take the VIC as the base at the moment.
*/
static inline u32 s3c24xx_ostimer_pending(void)
{
u32 pend = __raw_readl(S3C_VA_VIC0 + VIC_RAW_STATUS);
return pend & 1 << (IRQ_TIMER4_VIC - S3C64XX_IRQ_VIC0(0));
}
#define TICK_MAX (0xffffffff)
#endif /* __ASM_ARCH_6400_TICK_H */
arch/arm/mach-s3c6400/include/mach/uncompress.h 0 → 100644
View file @ fdb0a1a6
/* arch/arm/mach-s3c6400/include/mach/uncompress.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* S3C6400 - uncompress code
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_UNCOMPRESS_H
#define __ASM_ARCH_UNCOMPRESS_H
#include <mach/map.h>
#include <plat/uncompress.h>
static void arch_detect_cpu(void)
{
/* we do not need to do any cpu detection here at the moment. */
fifo_mask = S3C2440_UFSTAT_TXMASK;
fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
}
#endif /* __ASM_ARCH_UNCOMPRESS_H */
arch/arm/mach-s3c6410/Kconfig 0 → 100644
View file @ fdb0a1a6
# arch/arm/mach-s3c6410/Kconfig
#
# Copyright 2008 Openmoko, Inc.
# Copyright 2008 Simtec Electronics
#
# Licensed under GPLv2
# Configuration options for the S3C6410 CPU
config CPU_S3C6410
bool
select CPU_S3C6400_INIT
select CPU_S3C6400_CLOCK
help
Enable S3C6410 CPU support
config S3C6410_SETUP_SDHCI
bool
help
Internal helper functions for S3C6410 based SDHCI systems
config MACH_SMDK6410
bool "SMDK6410"
select CPU_S3C6410
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_I2C1
select S3C_DEV_FB
select S3C6410_SETUP_SDHCI
select S3C64XX_SETUP_I2C1
select S3C64XX_SETUP_FB_24BPP
help
Machine support for the Samsung SMDK6410
# At least some of the SMDK6410s were shipped with the card detect
# for the MMC/SD slots connected to the same input. This means that
# either the boards need to be altered to have channel0 to an alternate
# configuration or that only one slot can be used.
choice
prompt "SMDK6410 MMC/SD slot setup"
depends on MACH_SMDK6410
config SMDK6410_SD_CH0
bool "Use channel 0 only"
depends on MACH_SMDK6410
help
Select CON7 (channel 0) as the MMC/SD slot, as
at least some SMDK6410 boards come with the
resistors fitted so that the card detects for
channels 0 and 1 are the same.
config SMDK6410_SD_CH1
bool "Use channel 1 only"
depends on MACH_SMDK6410
help
Select CON6 (channel 1) as the MMC/SD slot, as
at least some SMDK6410 boards come with the
resistors fitted so that the card detects for
channels 0 and 1 are the same.
endchoice
arch/arm/mach-s3c6410/Makefile 0 → 100644
View file @ fdb0a1a6
# arch/arm/plat-s3c6410/Makefile
#
# Copyright 2008 Openmoko, Inc.
# Copyright 2008 Simtec Electronics
#
# Licensed under GPLv2
obj-y :=
obj-m :=
obj-n :=
obj- :=
# Core support for S3C6410 system
obj-$(CONFIG_CPU_S3C6410) += cpu.o
# Helper and device support
obj-$(CONFIG_S3C6410_SETUP_SDHCI) += setup-sdhci.o
# machine support
obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
arch/arm/mach-s3c6410/cpu.c 0 → 100644
View file @ fdb0a1a6
/* linux/arch/arm/mach-s3c6410/cpu.c
*
* Copyright 2008 Simtec Electronics
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/sysdev.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <plat/cpu-freq.h>
#include <plat/regs-serial.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/clock.h>
#include <plat/sdhci.h>
#include <plat/iic-core.h>
#include <plat/s3c6400.h>
#include <plat/s3c6410.h>
/* Initial IO mappings */
static struct map_desc s3c6410_iodesc[] __initdata = {
};
/* s3c6410_map_io
*
* register the standard cpu IO areas
*/
void __init s3c6410_map_io(void)
{
iotable_init(s3c6410_iodesc, ARRAY_SIZE(s3c6410_iodesc));
/* initialise device information early */
s3c6410_default_sdhci0();
s3c6410_default_sdhci1();
/* the i2c devices are directly compatible with s3c2440 */
s3c_i2c0_setname("s3c2440-i2c");
s3c_i2c1_setname("s3c2440-i2c");
}
void __init s3c6410_init_clocks(int xtal)
{
printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
s3c24xx_register_baseclocks(xtal);
s3c64xx_register_clocks();
s3c6400_register_clocks();
s3c6400_setup_clocks();
}
void __init s3c6410_init_irq(void)
{
/* VIC0 is missing IRQ7, VIC1 is fully populated. */
s3c64xx_init_irq(~0 & ~(1 << 7), ~0);
}
struct sysdev_class s3c6410_sysclass = {
.name = "s3c6410-core",
};
static struct sys_device s3c6410_sysdev = {
.cls = &s3c6410_sysclass,
};
static int __init s3c6410_core_init(void)
{
return sysdev_class_register(&s3c6410_sysclass);
}
core_initcall(s3c6410_core_init);
int __init s3c6410_init(void)
{
printk("S3C6410: Initialising architecture\n");
return sysdev_register(&s3c6410_sysdev);
}
arch/arm/mach-s3c6410/mach-smdk6410.c 0 → 100644
View file @ fdb0a1a6
/* linux/arch/arm/mach-s3c6410/mach-smdk6410.c
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/fb.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <video/platform_lcd.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/regs-fb.h>
#include <mach/map.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
#include <plat/iic.h>
#include <plat/fb.h>
#include <plat/s3c6410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
static struct s3c2410_uartcfg smdk6410_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = 0x3c5,
.ulcon = 0x03,
.ufcon = 0x51,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = 0x3c5,
.ulcon = 0x03,
.ufcon = 0x51,
},
};
/* framebuffer and LCD setup. */
/* GPF15 = LCD backlight control
* GPF13 => Panel power
* GPN5 = LCD nRESET signal
* PWM_TOUT1 => backlight brightness
*/
static void smdk6410_lcd_power_set(struct plat_lcd_data *pd,
unsigned int power)
{
if (power) {
gpio_direction_output(S3C64XX_GPF(13), 1);
gpio_direction_output(S3C64XX_GPF(15), 1);
/* fire nRESET on power up */
gpio_direction_output(S3C64XX_GPN(5), 0);
msleep(10);
gpio_direction_output(S3C64XX_GPN(5), 1);
msleep(1);
} else {
gpio_direction_output(S3C64XX_GPF(15), 0);
gpio_direction_output(S3C64XX_GPF(13), 0);
}
}
static struct plat_lcd_data smdk6410_lcd_power_data = {
.set_power = smdk6410_lcd_power_set,
};
static struct platform_device smdk6410_lcd_powerdev = {
.name = "platform-lcd",
.dev.parent = &s3c_device_fb.dev,
.dev.platform_data = &smdk6410_lcd_power_data,
};
static struct s3c_fb_pd_win smdk6410_fb_win0 = {
/* this is to ensure we use win0 */
.win_mode = {
.pixclock = 41094,
.left_margin = 8,
.right_margin = 13,
.upper_margin = 7,
.lower_margin = 5,
.hsync_len = 3,
.vsync_len = 1,
.xres = 800,
.yres = 480,
},
.max_bpp = 32,
.default_bpp = 16,
};
/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = {
.setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
.win[0] = &smdk6410_fb_win0,
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
};
struct map_desc smdk6410_iodesc[] = {};
static struct platform_device *smdk6410_devices[] __initdata = {
#ifdef CONFIG_SMDK6410_SD_CH0
&s3c_device_hsmmc0,
#endif
#ifdef CONFIG_SMDK6410_SD_CH1
&s3c_device_hsmmc1,
#endif
&s3c_device_i2c0,
&s3c_device_i2c1,
&s3c_device_fb,
&smdk6410_lcd_powerdev,
};
static struct i2c_board_info i2c_devs0[] __initdata = {
{ I2C_BOARD_INFO("24c08", 0x50), },
{ I2C_BOARD_INFO("WM8580", 0X1b), },
};
static struct i2c_board_info i2c_devs1[] __initdata = {
{ I2C_BOARD_INFO("24c128", 0x57), }, /* Samsung S524AD0XD1 */
};
static void __init smdk6410_map_io(void)
{
s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs));
}
static void __init smdk6410_machine_init(void)
{
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
s3c_fb_set_platdata(&smdk6410_lcd_pdata);
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
}
MACHINE_START(SMDK6410, "SMDK6410")
/* Maintainer: Ben Dooks <ben@fluff.org> */
.phys_io = S3C_PA_UART & 0xfff00000,
.io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
.boot_params = S3C64XX_PA_SDRAM + 0x100,
.init_irq = s3c6410_init_irq,
.map_io = smdk6410_map_io,
.init_machine = smdk6410_machine_init,
.timer = &s3c24xx_timer,
MACHINE_END
arch/arm/mach-s3c6410/setup-sdhci.c 0 → 100644
View file @ fdb0a1a6
/* linux/arch/arm/mach-s3c6410/setup-sdhci.c
*
* Copyright 2008 Simtec Electronics
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
#include <mach/gpio.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-sdhci.h>
#include <plat/sdhci.h>
/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
char *s3c6410_hsmmc_clksrcs[4] = {
[0] = "hsmmc",
[1] = "hsmmc",
[2] = "mmc_bus",
/* [3] = "48m", - note not succesfully used yet */
};
void s3c6410_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
{
unsigned int gpio;
unsigned int end;
end = S3C64XX_GPG(2 + width);
/* Set all the necessary GPG pins to special-function 0 */
for (gpio = S3C64XX_GPG(0); gpio < end; gpio++) {
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2));
}
void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
void __iomem *r,
struct mmc_ios *ios,
struct mmc_card *card)
{
u32 ctrl2, ctrl3;
/* don't need to alter anything acording to card-type */
writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
S3C_SDHCI_CTRL2_ENFBCLKRX |
S3C_SDHCI_CTRL2_DFCNT_NONE |
S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
if (ios->clock < 25 * 1000000)
ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
S3C_SDHCI_CTRL3_FCSEL2 |
S3C_SDHCI_CTRL3_FCSEL1 |
S3C_SDHCI_CTRL3_FCSEL0);
else
ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
printk(KERN_INFO "%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
writel(ctrl2, r + S3C_SDHCI_CONTROL2);
writel(ctrl3, r + S3C_SDHCI_CONTROL3);
}
void s3c6410_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
{
unsigned int gpio;
unsigned int end;
end = S3C64XX_GPH(2 + width);
/* Set all the necessary GPG pins to special-function 0 */
for (gpio = S3C64XX_GPH(0); gpio < end; gpio++) {
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
}
arch/arm/plat-s3c/Kconfig
View file @ fdb0a1a6
......@@ -6,8 +6,8 @@
config PLAT_S3C
bool
depends on ARCH_S3C2410
default y if ARCH_S3C2410
depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX
default y
select NO_IOPORT
help
Base platform code for any Samsung S3C device
......@@ -16,24 +16,24 @@ config PLAT_S3C
config CPU_LLSERIAL_S3C2410_ONLY
bool
depends on ARCH_S3C2410
depends on PLAT_S3C
default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440
config CPU_LLSERIAL_S3C2440_ONLY
bool
depends on ARCH_S3C2410
depends on PLAT_S3C
default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410
config CPU_LLSERIAL_S3C2410
bool
depends on ARCH_S3C2410
depends on PLAT_S3C
help
Selected if there is an S3C2410 (or register compatible) serial
low-level implementation needed
config CPU_LLSERIAL_S3C2440
bool
depends on ARCH_S3C2410
depends on PLAT_S3C
help
Selected if there is an S3C2440 (or register compatible) serial
low-level implementation needed
......@@ -57,6 +57,14 @@ config S3C_BOOT_ERROR_RESET
Say y here to use the watchdog to reset the system if the
kernel decompressor detects an error during decompression.
config S3C_BOOT_UART_FORCE_FIFO
bool "Force UART FIFO on during boot process"
depends on PLAT_S3C
default y
help
Say Y here to force the UART FIFOs on during the kernel
uncompressor
comment "Power management"
config S3C2410_PM_DEBUG
......@@ -102,3 +110,73 @@ config S3C_LOWLEVEL_UART_PORT
such as the `Uncompressing...` at start time. The value of
this configuration should be between zero and two. The port
must have been initialised by the boot-loader before use.
# options for gpiolib support
config S3C_GPIO_SPACE
int "Space between gpio banks"
default 0
help
Add a number of spare GPIO entries between each bank for debugging
purposes. This allows any problems where an counter overflows from
one bank to another to be caught, at the expense of using a little
more memory.
config S3C_GPIO_TRACK
bool
help
Internal configuration option to enable the s3c specific gpio
chip tracking if the platform requires it.
config S3C_GPIO_PULL_UPDOWN
bool
help
Internal configuration to enable the correct GPIO pull helper
config S3C_GPIO_PULL_DOWN
bool
help
Internal configuration to enable the correct GPIO pull helper
config S3C_GPIO_PULL_UP
bool
help
Internal configuration to enable the correct GPIO pull helper
config S3C_GPIO_CFG_S3C24XX
bool
help
Internal configuration to enable S3C24XX style GPIO configuration
functions.
config S3C_GPIO_CFG_S3C64XX
bool
help
Internal configuration to enable S3C64XX style GPIO configuration
functions.
# device definitions to compile in
config S3C_DEV_HSMMC
bool
depends on PLAT_S3C
help
Compile in platform device definitions for HSMMC code
config S3C_DEV_HSMMC1
bool
depends on PLAT_S3C
help
Compile in platform device definitions for HSMMC channel 1
config S3C_DEV_I2C1
bool
depends on PLAT_S3C
help
Compile in platform device definitions for I2C channel 1
config S3C_DEV_FB
bool
depends on PLAT_S3C
help
Compile in platform device definition for framebuffer
arch/arm/plat-s3c/Makefile
View file @ fdb0a1a6
# dummy makefile, currently just including asm/arm/plat-s3c/include/plat
# arch/arm/plat-s3c/Makefile
#
# Copyright 2008 Simtec Electronics
#
# Licensed under GPLv2
obj-n := dummy.o
obj-y :=
obj-m :=
obj-n :=
obj- :=
# Core support for all Samsung SoCs
obj-y += init.o
obj-y += time.o
obj-y += clock.o
obj-y += pwm-clock.o
obj-y += gpio.o
obj-y += gpio-config.o
# devices
obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o
obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o
obj-y += dev-i2c0.o
obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o
obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o
arch/arm/plat-s3c/clock.c 0 → 100644
View file @ fdb0a1a6
/* linux/arch/arm/plat-s3c24xx/clock.c
*
* Copyright (c) 2004-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C24XX Core clock control support
*
* Based on, and code from linux/arch/arm/mach-versatile/clock.c
**
** Copyright (C) 2004 ARM Limited.
** Written by Deep Blue Solutions Limited.
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/clk.h>
#include <linux/spinlock.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <plat/cpu-freq.h>
#include <plat/clock.h>
#include <plat/cpu.h>
/* clock information */
static LIST_HEAD(clocks);
/* We originally used an mutex here, but some contexts (see resume)
* are calling functions such as clk_set_parent() with IRQs disabled
* causing an BUG to be triggered.
*/
DEFINE_SPINLOCK(clocks_lock);
/* enable and disable calls for use with the clk struct */
static int clk_null_enable(struct clk *clk, int enable)
{
return 0;
}
/* Clock API calls */
struct clk *clk_get(struct device *dev, const char *id)
{
struct clk *p;
struct clk *clk = ERR_PTR(-ENOENT);
int idno;
if (dev == NULL || dev->bus != &platform_bus_type)
idno = -1;
else
idno = to_platform_device(dev)->id;
spin_lock(&clocks_lock);
list_for_each_entry(p, &clocks, list) {
if (p->id == idno &&
strcmp(id, p->name) == 0 &&
try_module_get(p->owner)) {
clk = p;
break;
}
}
/* check for the case where a device was supplied, but the
* clock that was being searched for is not device specific */
if (IS_ERR(clk)) {
list_for_each_entry(p, &clocks, list) {
if (p->id == -1 && strcmp(id, p->name) == 0 &&
try_module_get(p->owner)) {
clk = p;
break;
}
}
}
spin_unlock(&clocks_lock);
return clk;
}
void clk_put(struct clk *clk)
{
module_put(clk->owner);
}
int clk_enable(struct clk *clk)
{
if (IS_ERR(clk) || clk == NULL)
return -EINVAL;
clk_enable(clk->parent);
spin_lock(&clocks_lock);
if ((clk->usage++) == 0)
(clk->enable)(clk, 1);
spin_unlock(&clocks_lock);
return 0;
}
void clk_disable(struct clk *clk)
{
if (IS_ERR(clk) || clk == NULL)
return;
spin_lock(&clocks_lock);
if ((--clk->usage) == 0)
(clk->enable)(clk, 0);
spin_unlock(&clocks_lock);
clk_disable(clk->parent);
}
unsigned long clk_get_rate(struct clk *clk)
{
if (IS_ERR(clk))
return 0;
if (clk->rate != 0)
return clk->rate;
if (clk->get_rate != NULL)
return (clk->get_rate)(clk);
if (clk->parent != NULL)
return clk_get_rate(clk->parent);
return clk->rate;
}
long clk_round_rate(struct clk *clk, unsigned long rate)
{
if (!IS_ERR(clk) && clk->round_rate)
return (clk->round_rate)(clk, rate);
return rate;
}
int clk_set_rate(struct clk *clk, unsigned long rate)
{
int ret;
if (IS_ERR(clk))
return -EINVAL;
/* We do not default just do a clk->rate = rate as
* the clock may have been made this way by choice.
*/
WARN_ON(clk->set_rate == NULL);
if (clk->set_rate == NULL)
return -EINVAL;
spin_lock(&clocks_lock);
ret = (clk->set_rate)(clk, rate);
spin_unlock(&clocks_lock);
return ret;
}
struct clk *clk_get_parent(struct clk *clk)
{
return clk->parent;
}
int clk_set_parent(struct clk *clk, struct clk *parent)
{
int ret = 0;
if (IS_ERR(clk))
return -EINVAL;
spin_lock(&clocks_lock);
if (clk->set_parent)
ret = (clk->set_parent)(clk, parent);
spin_unlock(&clocks_lock);
return ret;
}
EXPORT_SYMBOL(clk_get);
EXPORT_SYMBOL(clk_put);
EXPORT_SYMBOL(clk_enable);
EXPORT_SYMBOL(clk_disable);
EXPORT_SYMBOL(clk_get_rate);
EXPORT_SYMBOL(clk_round_rate);
EXPORT_SYMBOL(clk_set_rate);
EXPORT_SYMBOL(clk_get_parent);
EXPORT_SYMBOL(clk_set_parent);
/* base clocks */
static int clk_default_setrate(struct clk *clk, unsigned long rate)
{
clk->rate = rate;
return 0;
}
struct clk clk_xtal = {
.name = "xtal",
.id = -1,
.rate = 0,
.parent = NULL,
.ctrlbit = 0,
};
struct clk clk_ext = {
.name = "ext",
.id = -1,
};
struct clk clk_epll = {
.name = "epll",
.id = -1,
};
struct clk clk_mpll = {
.name = "mpll",
.id = -1,
.set_rate = clk_default_setrate,
};
struct clk clk_upll = {
.name = "upll",
.id = -1,
.parent = NULL,
.ctrlbit = 0,
};
struct clk clk_f = {
.name = "fclk",
.id = -1,
.rate = 0,
.parent = &clk_mpll,
.ctrlbit = 0,
.set_rate = clk_default_setrate,
};
struct clk clk_h = {
.name = "hclk",
.id = -1,
.rate = 0,
.parent = NULL,
.ctrlbit = 0,
.set_rate = clk_default_setrate,
};
struct clk clk_p = {
.name = "pclk",
.id = -1,
.rate = 0,
.parent = NULL,
.ctrlbit = 0,
.set_rate = clk_default_setrate,
};
struct clk clk_usb_bus = {
.name = "usb-bus",
.id = -1,
.rate = 0,
.parent = &clk_upll,
};
struct clk s3c24xx_uclk = {
.name = "uclk",
.id = -1,
};
/* initialise the clock system */
int s3c24xx_register_clock(struct clk *clk)
{
clk->owner = THIS_MODULE;
if (clk->enable == NULL)
clk->enable = clk_null_enable;
/* add to the list of available clocks */
/* Quick check to see if this clock has already been registered. */
BUG_ON(clk->list.prev != clk->list.next);
spin_lock(&clocks_lock);
list_add(&clk->list, &clocks);
spin_unlock(&clocks_lock);
return 0;
}
int s3c24xx_register_clocks(struct clk **clks, int nr_clks)
{
int fails = 0;
for (; nr_clks > 0; nr_clks--, clks++) {
if (s3c24xx_register_clock(*clks) < 0)
fails++;
}
return fails;
}
/* initalise all the clocks */
int __init s3c24xx_register_baseclocks(unsigned long xtal)
{
printk(KERN_INFO "S3C24XX Clocks, (c) 2004 Simtec Electronics\n");
clk_xtal.rate = xtal;
/* register our clocks */
if (s3c24xx_register_clock(&clk_xtal) < 0)
printk(KERN_ERR "failed to register master xtal\n");
if (s3c24xx_register_clock(&clk_mpll) < 0)
printk(KERN_ERR "failed to register mpll clock\n");
if (s3c24xx_register_clock(&clk_upll) < 0)
printk(KERN_ERR "failed to register upll clock\n");
if (s3c24xx_register_clock(&clk_f) < 0)
printk(KERN_ERR "failed to register cpu fclk\n");
if (s3c24xx_register_clock(&clk_h) < 0)
printk(KERN_ERR "failed to register cpu hclk\n");
if (s3c24xx_register_clock(&clk_p) < 0)
printk(KERN_ERR "failed to register cpu pclk\n");
return 0;
}
arch/arm/plat-s3c/dev-fb.c 0 → 100644
View file @ fdb0a1a6
/* linux/arch/arm/plat-s3c/dev-fb.c
*
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* S3C series device definition for framebuffer device
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/platform_device.h>
#include <linux/fb.h>
#include <mach/map.h>
#include <mach/regs-fb.h>
#include <plat/fb.h>
#include <plat/devs.h>
#include <plat/cpu.h>
static struct resource s3c_fb_resource[] = {
[0] = {
.start = S3C_PA_FB,
.end = S3C_PA_FB + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_LCD_VSYNC,
.end = IRQ_LCD_VSYNC,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = IRQ_LCD_FIFO,
.end = IRQ_LCD_FIFO,
.flags = IORESOURCE_IRQ,
},
[3] = {
.start = IRQ_LCD_SYSTEM,
.end = IRQ_LCD_SYSTEM,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device s3c_device_fb = {
.name = "s3c-fb",
.id = -1,
.num_resources = ARRAY_SIZE(s3c_fb_resource),
.resource = s3c_fb_resource,
.dev.dma_mask = &s3c_device_fb.dev.coherent_dma_mask,
.dev.coherent_dma_mask = 0xffffffffUL,
};
void __init s3c_fb_set_platdata(struct s3c_fb_platdata *pd)
{
struct s3c_fb_platdata *npd;
if (!pd) {
printk(KERN_ERR "%s: no platform data\n", __func__);
return;
}
npd = kmemdup(pd, sizeof(struct s3c_fb_platdata), GFP_KERNEL);
if (!npd)
printk(KERN_ERR "%s: no memory for platform data\n", __func__);
s3c_device_fb.dev.platform_data = npd;
}
arch/arm/plat-s3c/dev-hsmmc.c 0 → 100644
View file @ fdb0a1a6
/* linux/arch/arm/plat-s3c/dev-hsmmc.c
*
* Copyright (c) 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* S3C series device definition for hsmmc devices
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/mmc/host.h>
#include <mach/map.h>
#include <plat/sdhci.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#define S3C_SZ_HSMMC (0x1000)
static struct resource s3c_hsmmc_resource[] = {
[0] = {
.start = S3C_PA_HSMMC0,
.end = S3C_PA_HSMMC0 + S3C_SZ_HSMMC - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_HSMMC0,
.end = IRQ_HSMMC0,
.flags = IORESOURCE_IRQ,
}
};
static u64 s3c_device_hsmmc_dmamask = 0xffffffffUL;
struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata = {
.max_width = 4,
.host_caps = (MMC_CAP_4_BIT_DATA |
MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
};
struct platform_device s3c_device_hsmmc0 = {
.name = "s3c-sdhci",
.id = 0,
.num_resources = ARRAY_SIZE(s3c_hsmmc_resource),
.resource = s3c_hsmmc_resource,
.dev = {
.dma_mask = &s3c_device_hsmmc_dmamask,
.coherent_dma_mask = 0xffffffffUL,
.platform_data = &s3c_hsmmc0_def_platdata,
},
};
void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd)
{
struct s3c_sdhci_platdata *set = &s3c_hsmmc0_def_platdata;
set->max_width = pd->max_width;
if (pd->cfg_gpio)
set->cfg_gpio = pd->cfg_gpio;
if (pd->cfg_card)
set->cfg_card = pd->cfg_card;
}
arch/arm/plat-s3c/dev-hsmmc1.c 0 → 100644
View file @ fdb0a1a6
/* linux/arch/arm/plat-s3c/dev-hsmmc1.c
*
* Copyright (c) 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* S3C series device definition for hsmmc device 1
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/mmc/host.h>
#include <mach/map.h>
#include <plat/sdhci.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#define S3C_SZ_HSMMC (0x1000)
static struct resource s3c_hsmmc1_resource[] = {
[0] = {
.start = S3C_PA_HSMMC1,
.end = S3C_PA_HSMMC1 + S3C_SZ_HSMMC - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_HSMMC1,
.end = IRQ_HSMMC1,
.flags = IORESOURCE_IRQ,
}
};
static u64 s3c_device_hsmmc1_dmamask = 0xffffffffUL;
struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata = {
.max_width = 4,
.host_caps = (MMC_CAP_4_BIT_DATA |
MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
};
struct platform_device s3c_device_hsmmc1 = {
.name = "s3c-sdhci",
.id = 1,
.num_resources = ARRAY_SIZE(s3c_hsmmc1_resource),
.resource = s3c_hsmmc1_resource,
.dev = {
.dma_mask = &s3c_device_hsmmc1_dmamask,
.coherent_dma_mask = 0xffffffffUL,
.platform_data = &s3c_hsmmc1_def_platdata,
},
};
void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd)
{
struct s3c_sdhci_platdata *set = &s3c_hsmmc1_def_platdata;
set->max_width = pd->max_width;
if (pd->cfg_gpio)
set->cfg_gpio = pd->cfg_gpio;
if (pd->cfg_card)
set->cfg_card = pd->cfg_card;
}
arch/arm/plat-s3c/dev-i2c0.c 0 → 100644
View file @ fdb0a1a6
/* linux/arch/arm/plat-s3c/dev-i2c0.c
*
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* S3C series device definition for i2c device 0
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/platform_device.h>
#include <mach/map.h>
#include <plat/regs-iic.h>
#include <plat/iic.h>
#include <plat/devs.h>
#include <plat/cpu.h>
static struct resource s3c_i2c_resource[] = {
[0] = {
.start = S3C_PA_IIC,
.end = S3C_PA_IIC + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_IIC,
.end = IRQ_IIC,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device s3c_device_i2c0 = {
.name = "s3c2410-i2c",
#ifdef CONFIG_S3C_DEV_I2C1
.id = 0,
#else
.id = -1,
#endif
.num_resources = ARRAY_SIZE(s3c_i2c_resource),
.resource = s3c_i2c_resource,
};
static struct s3c2410_platform_i2c default_i2c_data0 __initdata = {
.flags = 0,
.slave_addr = 0x10,
.bus_freq = 100*1000,
.max_freq = 400*1000,
.sda_delay = S3C2410_IICLC_SDA_DELAY5 | S3C2410_IICLC_FILTER_ON,
};
void __init s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *pd)
{
struct s3c2410_platform_i2c *npd;
if (!pd)
pd = &default_i2c_data0;
npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
if (!npd)
printk(KERN_ERR "%s: no memory for platform data\n", __func__);
else if (!npd->cfg_gpio)
npd->cfg_gpio = s3c_i2c0_cfg_gpio;
s3c_device_i2c0.dev.platform_data = npd;
}
arch/arm/plat-s3c/dev-i2c1.c 0 → 100644
View file @ fdb0a1a6
/* linux/arch/arm/plat-s3c/dev-i2c1.c
*
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* S3C series device definition for i2c device 1
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/platform_device.h>
#include <mach/map.h>
#include <plat/regs-iic.h>
#include <plat/iic.h>
#include <plat/devs.h>
#include <plat/cpu.h>
static struct resource s3c_i2c_resource[] = {
[0] = {
.start = S3C_PA_IIC1,
.end = S3C_PA_IIC1 + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_IIC1,
.end = IRQ_IIC1,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device s3c_device_i2c1 = {
.name = "s3c2410-i2c",
.id = 1,
.num_resources = ARRAY_SIZE(s3c_i2c_resource),
.resource = s3c_i2c_resource,
};
static struct s3c2410_platform_i2c default_i2c_data1 __initdata = {
.flags = 0,
.bus_num = 1,
.slave_addr = 0x10,
.bus_freq = 100*1000,
.max_freq = 400*1000,
.sda_delay = S3C2410_IICLC_SDA_DELAY5 | S3C2410_IICLC_FILTER_ON,
};
void __init s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *pd)
{
struct s3c2410_platform_i2c *npd;
if (!pd)
pd = &default_i2c_data1;
npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
if (!npd)
printk(KERN_ERR "%s: no memory for platform data\n", __func__);
else if (!npd->cfg_gpio)
npd->cfg_gpio = s3c_i2c1_cfg_gpio;
s3c_device_i2c1.dev.platform_data = npd;
}
arch/arm/plat-s3c/gpio-config.c 0 → 100644
View file @ fdb0a1a6
/* linux/arch/arm/plat-s3c/gpio-config.c
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* S3C series GPIO configuration core
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/gpio.h>
#include <linux/io.h>
#include <mach/gpio-core.h>
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
int s3c_gpio_cfgpin(unsigned int pin, unsigned int config)
{
struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
unsigned long flags;
int offset;
int ret;
if (!chip)
return -EINVAL;
offset = pin - chip->chip.base;
local_irq_save(flags);
ret = s3c_gpio_do_setcfg(chip, offset, config);
local_irq_restore(flags);
return ret;
}
int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull)
{
struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
unsigned long flags;
int offset, ret;
if (!chip)
return -EINVAL;
offset = pin - chip->chip.base;
local_irq_save(flags);
ret = s3c_gpio_do_setpull(chip, offset, pull);
local_irq_restore(flags);
return ret;
}
#ifdef CONFIG_S3C_GPIO_CFG_S3C24XX
int s3c_gpio_setcfg_s3c24xx_banka(struct s3c_gpio_chip *chip,
unsigned int off, unsigned int cfg)
{
void __iomem *reg = chip->base;
unsigned int shift = off;
u32 con;
if (s3c_gpio_is_cfg_special(cfg)) {
cfg &= 0xf;
/* Map output to 0, and SFN2 to 1 */
cfg -= 1;
if (cfg > 1)
return -EINVAL;
cfg <<= shift;
}
con = __raw_readl(reg);
con &= ~(0x1 << shift);
con |= cfg;
__raw_writel(con, reg);
return 0;
}
int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip,
unsigned int off, unsigned int cfg)
{
void __iomem *reg = chip->base;
unsigned int shift = off * 2;
u32 con;
if (s3c_gpio_is_cfg_special(cfg)) {
cfg &= 0xf;
if (cfg > 3)
return -EINVAL;
cfg <<= shift;
}
con = __raw_readl(reg);
con &= ~(0x3 << shift);
con |= cfg;
__raw_writel(con, reg);
return 0;
}
#endif
#ifdef CONFIG_S3C_GPIO_CFG_S3C64XX
int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
unsigned int off, unsigned int cfg)
{
void __iomem *reg = chip->base;
unsigned int shift = (off & 7) * 4;
u32 con;
if (off < 8 && chip->chip.ngpio >= 8)
reg -= 4;
if (s3c_gpio_is_cfg_special(cfg)) {
cfg &= 0xf;
cfg <<= shift;
}
con = __raw_readl(reg);
con &= ~(0xf << shift);
con |= cfg;
__raw_writel(con, reg);
return 0;
}
#endif /* CONFIG_S3C_GPIO_CFG_S3C64XX */
#ifdef CONFIG_S3C_GPIO_PULL_UPDOWN
int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip,
unsigned int off, s3c_gpio_pull_t pull)
{
void __iomem *reg = chip->base + 0x08;
int shift = off * 2;
u32 pup;
pup = __raw_readl(reg);
pup &= ~(3 << shift);
pup |= pull << shift;
__raw_writel(pup, reg);
return 0;
}
s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip,
unsigned int off)
{
void __iomem *reg = chip->base + 0x08;
int shift = off * 2;
u32 pup = __raw_readl(reg);
pup >>= shift;
pup &= 0x3;
return (__force s3c_gpio_pull_t)pup;
}
#endif
arch/arm/plat-s3c/gpio.c 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c/include/mach/io.h 0 → 100644
View file @ fdb0a1a6
/* arch/arm/plat-s3c/include/mach/io.h
*
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben-linux@fluff.org>
*
* Default IO routines for plat-s3c based systems, such as S3C24A0
*/
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
/* No current ISA/PCI bus support. */
#define __io(a) ((void __iomem *)(a))
#define __mem_pci(a) (a)
#define IO_SPACE_LIMIT (0xFFFFFFFF)
#endif
arch/arm/mach-s3c2410/include/mach/vmalloc.h → arch/arm/plat-s3c/include/mach/vmalloc.h
View file @ fdb0a1a6
/* arch/arm/mach-s3c2410/include/mach/vmalloc.h
/* arch/arm/plat-s3c/include/mach/vmalloc.h
*
* from arch/arm/mach-iop3xx/include/mach/vmalloc.h
*
......
arch/arm/plat-s3c/include/plat/adc.h 0 → 100644
View file @ fdb0a1a6
/* arch/arm/plat-s3c/include/plat/adc.h
*
* Copyright (c) 2008 Simtec Electronics
* http://armlinux.simnte.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* S3C24XX ADC driver information
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_PLAT_ADC_H
#define __ASM_PLAT_ADC_H __FILE__
struct s3c_adc_client;
extern int s3c_adc_start(struct s3c_adc_client *client,
unsigned int channel, unsigned int nr_samples);
extern struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
void (*select)(unsigned selected),
void (*conv)(unsigned d0, unsigned d1),
unsigned int is_ts);
extern void s3c_adc_release(struct s3c_adc_client *client);
#endif /* __ASM_PLAT_ADC_H */
arch/arm/plat-s3c24xx/include/plat/clock.h → arch/arm/plat-s3c/include/plat/clock.h
View file @ fdb0a1a6
/* linux/include/asm-arm/plat-s3c24xx/clock.h
* linux/arch/arm/mach-s3c2410/clock.h
/* linux/arch/arm/plat-s3c/include/plat/clock.h
*
* Copyright (c) 2004-2005 Simtec Electronics
* http://www.simtec.co.uk/products/SWLINUX/
......@@ -10,6 +9,8 @@
* published by the Free Software Foundation.
*/
#include <linux/spinlock.h>
struct clk {
struct list_head list;
struct module *owner;
......@@ -44,21 +45,44 @@ extern struct clk clk_h;
extern struct clk clk_p;
extern struct clk clk_mpll;
extern struct clk clk_upll;
extern struct clk clk_epll;
extern struct clk clk_xtal;
extern struct clk clk_ext;
/* S3C64XX specific clocks */
extern struct clk clk_27m;
extern struct clk clk_48m;
/* exports for arch/arm/mach-s3c2410
*
* Please DO NOT use these outside of arch/arm/mach-s3c2410
*/
extern struct mutex clocks_mutex;
extern spinlock_t clocks_lock;
extern int s3c2410_clkcon_enable(struct clk *clk, int enable);
extern int s3c24xx_register_clock(struct clk *clk);
extern int s3c24xx_register_clocks(struct clk **clk, int nr_clks);
extern int s3c24xx_setup_clocks(unsigned long xtal,
unsigned long fclk,
unsigned long hclk,
unsigned long pclk);
extern int s3c24xx_register_baseclocks(unsigned long xtal);
extern void s3c64xx_register_clocks(void);
extern void s3c24xx_setup_clocks(unsigned long fclk,
unsigned long hclk,
unsigned long pclk);
extern void s3c2410_setup_clocks(void);
extern void s3c2412_setup_clocks(void);
extern void s3c244x_setup_clocks(void);
extern void s3c2443_setup_clocks(void);
/* S3C64XX specific functions and clocks */
extern int s3c64xx_sclk_ctrl(struct clk *clk, int enable);
/* Init for pwm clock code */
extern void s3c_pwmclk_init(void);
arch/arm/plat-s3c/include/plat/cpu-freq.h 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c/include/plat/debug-macro.S
View file @ fdb0a1a6
......@@ -20,7 +20,7 @@
.endm
#ifndef fifo_level
#define fifo_level fifo_level_s3c2410
#define fifo_level fifo_level_s3c2440
#endif
.macro fifo_full_s3c2440 rd, rx
......
arch/arm/plat-s3c/include/plat/fb.h 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c/include/plat/gpio-cfg.h 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c/include/plat/gpio-core.h 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c/include/plat/iic-core.h 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c/include/plat/iic.h
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c/include/plat/regs-fb.h 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c/include/plat/regs-irqtype.h 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c/include/plat/regs-sdhci.h 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c/include/plat/regs-timer.h
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c/include/plat/sdhci.h 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c/include/plat/uncompress.h
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c/init.c 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c24xx/Kconfig
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c24xx/Makefile
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c24xx/adc.c 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c24xx/clock-dclk.c 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c24xx/clock.c
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c24xx/cpu.c
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c24xx/devs.c
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c24xx/dma.c
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c24xx/gpiolib.c
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c24xx/include/mach/pwm-clock.h 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c24xx/include/plat/map.h 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c24xx/include/plat/pll.h 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c24xx/irq.c
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c24xx/pm.c
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c24xx/s3c244x-clock.c
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c24xx/s3c244x.c
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c24xx/s3c244x.h
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c24xx/setup-i2c.c 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c64xx/Kconfig 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c64xx/Makefile 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c64xx/clock.c 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c64xx/cpu.c 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c64xx/dev-uart.c 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c64xx/gpiolib.c 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c64xx/include/plat/irqs.h 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c64xx/include/plat/pll.h 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c64xx/include/plat/regs-clock.h 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c64xx/include/plat/regs-gpio.h 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c64xx/include/plat/regs-sys.h 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c64xx/include/plat/s3c6400.h 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c64xx/include/plat/s3c6410.h 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c64xx/irq-eint.c 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c64xx/irq.c 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c64xx/s3c6400-clock.c 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c64xx/s3c6400-init.c 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c64xx/setup-fb-24bpp.c 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c64xx/setup-i2c0.c 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
arch/arm/plat-s3c64xx/setup-i2c1.c 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
drivers/serial/Kconfig
View file @ fdb0a1a6
This diff is collapsed.
drivers/serial/Makefile
View file @ fdb0a1a6
This diff is collapsed.
drivers/serial/s3c24a0.c 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
drivers/serial/s3c6400.c 0 → 100644
View file @ fdb0a1a6
This diff is collapsed.
drivers/serial/samsung.c
View file @ fdb0a1a6
This diff is collapsed.
drivers/serial/samsung.h
View file @ fdb0a1a6
This diff is collapsed.
include/linux/serial_core.h
View file @ fdb0a1a6
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7