Commit fdc509b1 authored by Tony Lindgren's avatar Tony Lindgren

ARM: omap2plus_defconfig: Add cpufreq to defconfig

Note that we can now use the CONFIG_GENERIC_CPUFREQ_CPU0,
so let's only enable that. Let's use CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND
as suggested by Nishant.

And also let's enable thermal as explained by Nishant Menon:

Many TI SoCs using Highest frequency is not really too nice of an idea for
long periods of time. And not everything is upstream to support things
optimially - example avs class 0, 1.5 ABB consolidation with cpufreq etc..
We definitely need thermal enabled as well for device safety needs.

[tony@atomide.com: updated per Nishant's suggestions]
Acked-by: default avatarNishanth Menon <nm@ti.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent d7c517b5
...@@ -43,6 +43,14 @@ CONFIG_ARM_APPENDED_DTB=y ...@@ -43,6 +43,14 @@ CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200" CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200"
CONFIG_KEXEC=y CONFIG_KEXEC=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
CONFIG_GENERIC_CPUFREQ_CPU0=y
# CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set
CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE=y
CONFIG_BINFMT_MISC=y CONFIG_BINFMT_MISC=y
CONFIG_PM_DEBUG=y CONFIG_PM_DEBUG=y
...@@ -162,7 +170,9 @@ CONFIG_SENSORS_LM75=m ...@@ -162,7 +170,9 @@ CONFIG_SENSORS_LM75=m
CONFIG_THERMAL=y CONFIG_THERMAL=y
CONFIG_THERMAL_GOV_FAIR_SHARE=y CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_USER_SPACE=y CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_CPU_THERMAL=y
CONFIG_TI_SOC_THERMAL=y CONFIG_TI_SOC_THERMAL=y
CONFIG_TI_THERMAL=y
CONFIG_OMAP4_THERMAL=y CONFIG_OMAP4_THERMAL=y
CONFIG_OMAP5_THERMAL=y CONFIG_OMAP5_THERMAL=y
CONFIG_DRA752_THERMAL=y CONFIG_DRA752_THERMAL=y
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment