Commit fdd13b36 authored by David Brownell's avatar David Brownell Committed by Greg Kroah-Hartman

[PATCH] USB: OHCI relies less on NDP register

Some OHCI implementations have differences in the way the NDP register
(in roothub_a) reports the number of ports present. This patch allows the
platform specific code to optionally supply the number of ports. The
driver just reads the value at init (if not supplied) instead of reading
it every time its needed (except for an AMD756 bug workaround).

It also sets the value correctly for the ARM pxa27x architecture.
Signed-Off-By: default avatarRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent e0fd3cbc
......@@ -228,23 +228,22 @@ ohci_dump_roothub (
char **next,
unsigned *size)
{
u32 temp, ndp, i;
u32 temp, i;
temp = roothub_a (controller);
if (temp == ~(u32)0)
return;
ndp = (temp & RH_A_NDP);
if (verbose) {
ohci_dbg_sw (controller, next, size,
"roothub.a %08x POTPGT=%d%s%s%s%s%s NDP=%d\n", temp,
"roothub.a %08x POTPGT=%d%s%s%s%s%s NDP=%d(%d)\n", temp,
((temp & RH_A_POTPGT) >> 24) & 0xff,
(temp & RH_A_NOCP) ? " NOCP" : "",
(temp & RH_A_OCPM) ? " OCPM" : "",
(temp & RH_A_DT) ? " DT" : "",
(temp & RH_A_NPS) ? " NPS" : "",
(temp & RH_A_PSM) ? " PSM" : "",
ndp
(temp & RH_A_NDP), controller->num_ports
);
temp = roothub_b (controller);
ohci_dbg_sw (controller, next, size,
......@@ -266,7 +265,7 @@ ohci_dump_roothub (
);
}
for (i = 0; i < ndp; i++) {
for (i = 0; i < controller->num_ports; i++) {
temp = roothub_portstatus (controller, i);
dbg_port_sw (controller, i, temp, next, size);
}
......
......@@ -484,6 +484,10 @@ static int ohci_init (struct ohci_hcd *ohci)
// flush the writes
(void) ohci_readl (ohci, &ohci->regs->control);
/* Read the number of ports unless overridden */
if (ohci->num_ports == 0)
ohci->num_ports = roothub_a(ohci) & RH_A_NDP;
if (ohci->hcca)
return 0;
......@@ -560,10 +564,8 @@ static int ohci_run (struct ohci_hcd *ohci)
msleep(temp);
temp = roothub_a (ohci);
if (!(temp & RH_A_NPS)) {
unsigned ports = temp & RH_A_NDP;
/* power down each port */
for (temp = 0; temp < ports; temp++)
for (temp = 0; temp < ohci->num_ports; temp++)
ohci_writel (ohci, RH_PS_LSDA,
&ohci->regs->roothub.portstatus [temp]);
}
......@@ -861,7 +863,7 @@ static int ohci_restart (struct ohci_hcd *ohci)
* and that if we try to turn them back on the root hub
* will respond to CSC processing.
*/
i = roothub_a (ohci) & RH_A_NDP;
i = ohci->num_ports;
while (i--)
ohci_writel (ohci, RH_PS_PSS,
&ohci->regs->roothub.portstatus [temp]);
......
......@@ -184,7 +184,7 @@ static int ohci_hub_resume (struct usb_hcd *hcd)
if (status != -EINPROGRESS)
return status;
temp = roothub_a (ohci) & RH_A_NDP;
temp = ohci->num_ports;
enables = 0;
while (temp--) {
u32 stat = ohci_readl (ohci,
......@@ -304,7 +304,7 @@ static int
ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
int ports, i, changed = 0, length = 1;
int i, changed = 0, length = 1;
int can_suspend = hcd->can_wakeup;
unsigned long flags;
......@@ -319,9 +319,10 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
goto done;
}
ports = roothub_a (ohci) & RH_A_NDP;
if (ports > MAX_ROOT_PORTS) {
ohci_err (ohci, "bogus NDP=%d, rereads as NDP=%d\n", ports,
/* undocumented erratum seen on at least rev D */
if ((ohci->flags & OHCI_QUIRK_AMD756)
&& (roothub_a (ohci) & RH_A_NDP) > MAX_ROOT_PORTS) {
ohci_warn (ohci, "bogus NDP, rereads as NDP=%d\n",
ohci_readl (ohci, &ohci->regs->roothub.a) & RH_A_NDP);
/* retry later; "should not happen" */
goto done;
......@@ -332,13 +333,13 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
buf [0] = changed = 1;
else
buf [0] = 0;
if (ports > 7) {
if (ohci->num_ports > 7) {
buf [1] = 0;
length++;
}
/* look at each port */
for (i = 0; i < ports; i++) {
for (i = 0; i < ohci->num_ports; i++) {
u32 status = roothub_portstatus (ohci, i);
if (status & (RH_PS_CSC | RH_PS_PESC | RH_PS_PSSC
......@@ -395,15 +396,14 @@ ohci_hub_descriptor (
struct usb_hub_descriptor *desc
) {
u32 rh = roothub_a (ohci);
int ports = rh & RH_A_NDP;
u16 temp;
desc->bDescriptorType = 0x29;
desc->bPwrOn2PwrGood = (rh & RH_A_POTPGT) >> 24;
desc->bHubContrCurrent = 0;
desc->bNbrPorts = ports;
temp = 1 + (ports / 8);
desc->bNbrPorts = ohci->num_ports;
temp = 1 + (ohci->num_ports / 8);
desc->bDescLength = 7 + 2 * temp;
temp = 0;
......@@ -421,7 +421,7 @@ ohci_hub_descriptor (
rh = roothub_b (ohci);
memset(desc->bitmap, 0xff, sizeof(desc->bitmap));
desc->bitmap [0] = rh & RH_B_DR;
if (ports > 7) {
if (ohci->num_ports > 7) {
desc->bitmap [1] = (rh & RH_B_DR) >> 8;
desc->bitmap [2] = 0xff;
} else
......
......@@ -258,6 +258,9 @@ ohci_pxa27x_start (struct usb_hcd *hcd)
ohci_dbg (ohci, "ohci_pxa27x_start, ohci:%p", ohci);
/* The value of NDP in roothub_a is incorrect on this hardware */
ohci->num_ports = 3;
if ((ret = ohci_init(ohci)) < 0)
return ret;
......
......@@ -383,6 +383,7 @@ struct ohci_hcd {
/*
* driver state
*/
int num_ports;
int load [NUM_INTS];
u32 hc_control; /* copy of hc control reg */
unsigned long next_statechange; /* suspend/resume */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment