Merge tag 'mailbox-v5.3' of git://git.linaro.org/landing-teams/working/fujitsu/integration

Pull mailbox updates from Jassi Brar:

 - stm32: race fix by adding a spinlock

 - mhu: trim included headers

 - omap: add support for K3 SoCs

 - imx: Irq disable fix

 - bcm: tidy up extracting driver data

 - tegra: make resume 'noirq'

 - api: fix error handling

* tag 'mailbox-v5.3' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox: handle failed named mailbox channel request
  mailbox: tegra: avoid resume NULL mailboxes
  mailbox: tegra: hsp: add noirq resume
  mailbox: bcm-flexrm-mailbox: using dev_get_drvdata directly
  mailbox: imx: Clear GIEn bit at shutdown
  mailbox: omap: Add support for TI K3 SoCs
  dt-bindings: mailbox: omap: Update bindings for TI K3 SoCs
  mailbox: arm_mhu: reorder header inclusion and drop unneeded ones
  mailbox: stm32_ipcc: add spinlock to fix channels concurrent access

Documentation/devicetree/bindings/mailbox/omap-mailbox.txt

-OMAP2+ Mailbox Driver
+OMAP2+ and K3 Mailbox
 =====================
 
 The OMAP mailbox hardware facilitates communication between different processors
@@ -7,7 +7,7 @@ various processor subsystems and is connected on an interconnect bus. The
 communication is achieved through a set of registers for message storage and
 interrupt configuration registers.
 
-Each mailbox IP block has a certain number of h/w fifo queues and output
+Each mailbox IP block/cluster has a certain number of h/w fifo queues and output
 interrupt lines. An output interrupt line is routed to an interrupt controller
 within a processor subsystem, and there can be more than one line going to a
 specific processor's interrupt controller. The interrupt line connections are
@@ -23,12 +23,16 @@ All the current OMAP SoCs except for the newest DRA7xx SoC has a single IP
 instance. DRA7xx has multiple instances with different number of h/w fifo queues
 and interrupt lines between different instances. The interrupt lines can also be
 routed to different processor sub-systems on DRA7xx as they are routed through
-the Crossbar, a kind of interrupt router/multiplexer.
+the Crossbar, a kind of interrupt router/multiplexer. The K3 AM65x and J721E
+SoCs has each of these instances form a cluster and combine multiple clusters
+into a single IP block present within the Main NavSS. The interrupt lines from
+all these clusters are multiplexed and routed to different processor subsystems
+over a limited number of common interrupt output lines of an Interrupt Router.
 
 Mailbox Device Node:
 ====================
-A Mailbox device node is used to represent a Mailbox IP instance within a SoC.
-The sub-mailboxes are represented as child nodes of this parent node.
+A Mailbox device node is used to represent a Mailbox IP instance/cluster within
+a SoC. The sub-mailboxes are represented as child nodes of this parent node.
 
 Required properties:
 --------------------
@@ -37,12 +41,12 @@ Required properties:
 			    "ti,omap3-mailbox" for OMAP3430, OMAP3630 SoCs
 			    "ti,omap4-mailbox" for OMAP44xx, OMAP54xx, AM33xx,
 						   AM43xx and DRA7xx SoCs
+			    "ti,am654-mailbox" for K3 AM65x and J721E SoCs
 - reg:			Contains the mailbox register address range (base
 			address and length)
 - interrupts:		Contains the interrupt information for the mailbox
 			device. The format is dependent on which interrupt
-			controller the OMAP device uses
-- ti,hwmods:		Name of the hwmod associated with the mailbox
+			controller the Mailbox device uses
 - #mbox-cells:		Common mailbox binding property to identify the number
 			of cells required for the mailbox specifier. Should be
 			1
@@ -50,6 +54,23 @@ Required properties:
 			device can interrupt
 - ti,mbox-num-fifos:	Number of h/w fifo queues within the mailbox IP block
 
+SoC-specific Required properties:
+---------------------------------
+The following are mandatory properties for the OMAP architecture based SoCs
+only:
+- ti,hwmods:		Name of the hwmod associated with the mailbox. This
+			should be defined in the mailbox node only if the node
+			is not defined as a child node of a corresponding sysc
+			interconnect node.
+
+The following are mandatory properties for the K3 AM65x and J721E SoCs only:
+- interrupt-parent:	Should contain a phandle to the TI-SCI interrupt
+			controller node that is used to dynamically program
+			the interrupt routes between the IP and the main GIC
+			controllers. See the following binding for additional
+			details,
+			Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt
+
 Child Nodes:
 ============
 A child node is used for representing the actual sub-mailbox device that is
@@ -98,7 +119,7 @@ to be used by the client user.
 Example:
 --------
 
-/* OMAP4 */
+1. /* OMAP4 */
 mailbox: mailbox@4a0f4000 {
 	compatible = "ti,omap4-mailbox";
 	reg = <0x4a0f4000 0x200>;
@@ -123,7 +144,7 @@ dsp {
 	...
 };
 
-/* AM33xx */
+2. /* AM33xx */
 mailbox: mailbox@480c8000 {
 	compatible = "ti,omap4-mailbox";
 	reg = <0x480C8000 0x200>;
@@ -137,3 +158,23 @@ mailbox: mailbox@480c8000 {
 		ti,mbox-rx = <0 0 3>;
 	};
 };
+
+3. /* AM65x */
+&cbass_main {
+	cbass_main_navss: interconnect0 {
+		mailbox0_cluster0: mailbox@31f80000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f80000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&intr_main_navss>;
+			interrupts = <164 0>;
+
+			mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+				ti,mbox-tx = <1 0 0>;
+				ti,mbox-rx = <0 0 0>;
+			};
+		};
+	};
+};

drivers/mailbox/Kconfig

@@ -54,7 +54,7 @@ config ARMADA_37XX_RWTM_MBOX
 
 config OMAP2PLUS_MBOX
 	tristate "OMAP2+ Mailbox framework support"
-	depends on ARCH_OMAP2PLUS
+	depends on ARCH_OMAP2PLUS || ARCH_K3
 	help
 	  Mailbox implementation for OMAP family chips with hardware for
 	  interprocessor communication involving DSP, IVA1.0 and IVA2 in

drivers/mailbox/arm_mhu.c

@@ -5,16 +5,13 @@
  * Author: Jassi Brar <jaswinder.singh@linaro.org>
  */
 
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/mutex.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
+#include <linux/amba/bus.h>
+#include <linux/device.h>
 #include <linux/err.h>
+#include <linux/interrupt.h>
 #include <linux/io.h>
-#include <linux/module.h>
-#include <linux/amba/bus.h>
 #include <linux/mailbox_controller.h>
+#include <linux/module.h>
 
 #define INTR_STAT_OFS	0x0
 #define INTR_SET_OFS	0x8

drivers/mailbox/bcm-flexrm-mailbox.c

@@ -1163,8 +1163,7 @@ static int flexrm_process_completions(struct flexrm_ring *ring)
 
 static int flexrm_debugfs_conf_show(struct seq_file *file, void *offset)
 {
-	struct platform_device *pdev = to_platform_device(file->private);
-	struct flexrm_mbox *mbox = platform_get_drvdata(pdev);
+	struct flexrm_mbox *mbox = dev_get_drvdata(file->private);
 
 	/* Write config in file */
 	flexrm_write_config_in_seqfile(mbox, file);
@@ -1174,8 +1173,7 @@ static int flexrm_debugfs_conf_show(struct seq_file *file, void *offset)
 
 static int flexrm_debugfs_stats_show(struct seq_file *file, void *offset)
 {
-	struct platform_device *pdev = to_platform_device(file->private);
-	struct flexrm_mbox *mbox = platform_get_drvdata(pdev);
+	struct flexrm_mbox *mbox = dev_get_drvdata(file->private);
 
 	/* Write stats in file */
 	flexrm_write_stats_in_seqfile(mbox, file);

drivers/mailbox/imx-mailbox.c

@@ -217,8 +217,8 @@ static void imx_mu_shutdown(struct mbox_chan *chan)
 	if (cp->type == IMX_MU_TYPE_TXDB)
 		tasklet_kill(&cp->txdb_tasklet);
 
-	imx_mu_xcr_rmw(priv, 0,
-		   IMX_MU_xCR_TIEn(cp->idx) | IMX_MU_xCR_RIEn(cp->idx));
+	imx_mu_xcr_rmw(priv, 0, IMX_MU_xCR_TIEn(cp->idx) |
+		       IMX_MU_xCR_RIEn(cp->idx) | IMX_MU_xCR_GIEn(cp->idx));
 
 	free_irq(priv->irq, chan);
 }

drivers/mailbox/mailbox.c

@@ -418,11 +418,13 @@ struct mbox_chan *mbox_request_channel_byname(struct mbox_client *cl,
 
 	of_property_for_each_string(np, "mbox-names", prop, mbox_name) {
 		if (!strncmp(name, mbox_name, strlen(name)))
-			break;
+			return mbox_request_channel(cl, index);
 		index++;
 	}
 
-	return mbox_request_channel(cl, index);
+	dev_err(cl->dev, "%s() could not locate channel named \"%s\"\n",
+		__func__, name);
+	return ERR_PTR(-EINVAL);
 }
 EXPORT_SYMBOL_GPL(mbox_request_channel_byname);
 

drivers/mailbox/omap-mailbox.c

@@ -3,7 +3,7 @@
  * OMAP mailbox driver
  *
  * Copyright (C) 2006-2009 Nokia Corporation. All rights reserved.
- * Copyright (C) 2013-2016 Texas Instruments Incorporated - http://www.ti.com
+ * Copyright (C) 2013-2019 Texas Instruments Incorporated - http://www.ti.com
  *
  * Contact: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
  *          Suman Anna <s-anna@ti.com>
@@ -141,14 +141,14 @@ void mbox_write_reg(struct omap_mbox_device *mdev, u32 val, size_t ofs)
 }
 
 /* Mailbox FIFO handle functions */
-static mbox_msg_t mbox_fifo_read(struct omap_mbox *mbox)
+static u32 mbox_fifo_read(struct omap_mbox *mbox)
 {
 	struct omap_mbox_fifo *fifo = &mbox->rx_fifo;
 
-	return (mbox_msg_t)mbox_read_reg(mbox->parent, fifo->msg);
+	return mbox_read_reg(mbox->parent, fifo->msg);
 }
 
-static void mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg)
+static void mbox_fifo_write(struct omap_mbox *mbox, u32 msg)
 {
 	struct omap_mbox_fifo *fifo = &mbox->tx_fifo;
 
@@ -256,14 +256,16 @@ static void mbox_rx_work(struct work_struct *work)
 {
 	struct omap_mbox_queue *mq =
 			container_of(work, struct omap_mbox_queue, work);
-	mbox_msg_t msg;
+	mbox_msg_t data;
+	u32 msg;
 	int len;
 
 	while (kfifo_len(&mq->fifo) >= sizeof(msg)) {
 		len = kfifo_out(&mq->fifo, (unsigned char *)&msg, sizeof(msg));
 		WARN_ON(len != sizeof(msg));
+		data = msg;
 
-		mbox_chan_received_data(mq->mbox->chan, (void *)msg);
+		mbox_chan_received_data(mq->mbox->chan, (void *)data);
 		spin_lock_irq(&mq->lock);
 		if (mq->full) {
 			mq->full = false;
@@ -286,7 +288,7 @@ static void __mbox_tx_interrupt(struct omap_mbox *mbox)
 static void __mbox_rx_interrupt(struct omap_mbox *mbox)
 {
 	struct omap_mbox_queue *mq = mbox->rxq;
-	mbox_msg_t msg;
+	u32 msg;
 	int len;
 
 	while (!mbox_fifo_empty(mbox)) {
@@ -540,13 +542,13 @@ static void omap_mbox_chan_shutdown(struct mbox_chan *chan)
 	mutex_unlock(&mdev->cfg_lock);
 }
 
-static int omap_mbox_chan_send_noirq(struct omap_mbox *mbox, void *data)
+static int omap_mbox_chan_send_noirq(struct omap_mbox *mbox, u32 msg)
 {
 	int ret = -EBUSY;
 
 	if (!mbox_fifo_full(mbox)) {
 		_omap_mbox_enable_irq(mbox, IRQ_RX);
-		mbox_fifo_write(mbox, (mbox_msg_t)data);
+		mbox_fifo_write(mbox, msg);
 		ret = 0;
 		_omap_mbox_disable_irq(mbox, IRQ_RX);
 
@@ -558,12 +560,12 @@ static int omap_mbox_chan_send_noirq(struct omap_mbox *mbox, void *data)
 	return ret;
 }
 
-static int omap_mbox_chan_send(struct omap_mbox *mbox, void *data)
+static int omap_mbox_chan_send(struct omap_mbox *mbox, u32 msg)
 {
 	int ret = -EBUSY;
 
 	if (!mbox_fifo_full(mbox)) {
-		mbox_fifo_write(mbox, (mbox_msg_t)data);
+		mbox_fifo_write(mbox, msg);
 		ret = 0;
 	}
 
@@ -576,14 +578,15 @@ static int omap_mbox_chan_send_data(struct mbox_chan *chan, void *data)
 {
 	struct omap_mbox *mbox = mbox_chan_to_omap_mbox(chan);
 	int ret;
+	u32 msg = omap_mbox_message(data);
 
 	if (!mbox)
 		return -EINVAL;
 
 	if (mbox->send_no_irq)
-		ret = omap_mbox_chan_send_noirq(mbox, data);
+		ret = omap_mbox_chan_send_noirq(mbox, msg);
 	else
-		ret = omap_mbox_chan_send(mbox, data);
+		ret = omap_mbox_chan_send(mbox, msg);
 
 	return ret;
 }
@@ -656,6 +659,10 @@ static const struct of_device_id omap_mailbox_of_match[] = {
 		.compatible	= "ti,omap4-mailbox",
 		.data		= &omap4_data,
 	},
+	{
+		.compatible	= "ti,am654-mailbox",
+		.data		= &omap4_data,
+	},
 	{
 		/* end */
 	},
@@ -830,7 +837,10 @@ static int omap_mbox_probe(struct platform_device *pdev)
 	mdev->intr_type = intr_type;
 	mdev->mboxes = list;
 
-	/* OMAP does not have a Tx-Done IRQ, but rather a Tx-Ready IRQ */
+	/*
+	 * OMAP/K3 Mailbox IP does not have a Tx-Done IRQ, but rather a Tx-Ready
+	 * IRQ and is needed to run the Tx state machine
+	 */
 	mdev->controller.txdone_irq = true;
 	mdev->controller.dev = mdev->dev;
 	mdev->controller.ops = &omap_mbox_chan_ops;
@@ -899,9 +909,8 @@ static int __init omap_mbox_init(void)
 		return err;
 
 	/* kfifo size sanity check: alignment and minimal size */
-	mbox_kfifo_size = ALIGN(mbox_kfifo_size, sizeof(mbox_msg_t));
-	mbox_kfifo_size = max_t(unsigned int, mbox_kfifo_size,
-							sizeof(mbox_msg_t));
+	mbox_kfifo_size = ALIGN(mbox_kfifo_size, sizeof(u32));
+	mbox_kfifo_size = max_t(unsigned int, mbox_kfifo_size, sizeof(u32));
 
 	err = platform_driver_register(&omap_mbox_driver);
 	if (err)

drivers/mailbox/stm32-ipcc.c

@@ -50,6 +50,7 @@ struct stm32_ipcc {
 	void __iomem *reg_base;
 	void __iomem *reg_proc;
 	struct clk *clk;
+	spinlock_t lock; /* protect access to IPCC registers */
 	int irqs[IPCC_IRQ_NUM];
 	int wkp;
 	u32 proc_id;
@@ -58,14 +59,24 @@ struct stm32_ipcc {
 	u32 xmr;
 };
 
-static inline void stm32_ipcc_set_bits(void __iomem *reg, u32 mask)
+static inline void stm32_ipcc_set_bits(spinlock_t *lock, void __iomem *reg,
+				       u32 mask)
 {
+	unsigned long flags;
+
+	spin_lock_irqsave(lock, flags);
 	writel_relaxed(readl_relaxed(reg) | mask, reg);
+	spin_unlock_irqrestore(lock, flags);
 }
 
-static inline void stm32_ipcc_clr_bits(void __iomem *reg, u32 mask)
+static inline void stm32_ipcc_clr_bits(spinlock_t *lock, void __iomem *reg,
+				       u32 mask)
 {
+	unsigned long flags;
+
+	spin_lock_irqsave(lock, flags);
 	writel_relaxed(readl_relaxed(reg) & ~mask, reg);
+	spin_unlock_irqrestore(lock, flags);
 }
 
 static irqreturn_t stm32_ipcc_rx_irq(int irq, void *data)
@@ -92,7 +103,7 @@ static irqreturn_t stm32_ipcc_rx_irq(int irq, void *data)
 
 		mbox_chan_received_data(&ipcc->controller.chans[chan], NULL);
 
-		stm32_ipcc_set_bits(ipcc->reg_proc + IPCC_XSCR,
+		stm32_ipcc_set_bits(&ipcc->lock, ipcc->reg_proc + IPCC_XSCR,
 				    RX_BIT_CHAN(chan));
 
 		ret = IRQ_HANDLED;
@@ -121,7 +132,7 @@ static irqreturn_t stm32_ipcc_tx_irq(int irq, void *data)
 		dev_dbg(dev, "%s: chan:%d tx\n", __func__, chan);
 
 		/* mask 'tx channel free' interrupt */
-		stm32_ipcc_set_bits(ipcc->reg_proc + IPCC_XMR,
+		stm32_ipcc_set_bits(&ipcc->lock, ipcc->reg_proc + IPCC_XMR,
 				    TX_BIT_CHAN(chan));
 
 		mbox_chan_txdone(&ipcc->controller.chans[chan], 0);
@@ -141,10 +152,12 @@ static int stm32_ipcc_send_data(struct mbox_chan *link, void *data)
 	dev_dbg(ipcc->controller.dev, "%s: chan:%d\n", __func__, chan);
 
 	/* set channel n occupied */
-	stm32_ipcc_set_bits(ipcc->reg_proc + IPCC_XSCR, TX_BIT_CHAN(chan));
+	stm32_ipcc_set_bits(&ipcc->lock, ipcc->reg_proc + IPCC_XSCR,
+			    TX_BIT_CHAN(chan));
 
 	/* unmask 'tx channel free' interrupt */
-	stm32_ipcc_clr_bits(ipcc->reg_proc + IPCC_XMR, TX_BIT_CHAN(chan));
+	stm32_ipcc_clr_bits(&ipcc->lock, ipcc->reg_proc + IPCC_XMR,
+			    TX_BIT_CHAN(chan));
 
 	return 0;
 }
@@ -163,7 +176,8 @@ static int stm32_ipcc_startup(struct mbox_chan *link)
 	}
 
 	/* unmask 'rx channel occupied' interrupt */
-	stm32_ipcc_clr_bits(ipcc->reg_proc + IPCC_XMR, RX_BIT_CHAN(chan));
+	stm32_ipcc_clr_bits(&ipcc->lock, ipcc->reg_proc + IPCC_XMR,
+			    RX_BIT_CHAN(chan));
 
 	return 0;
 }
@@ -175,7 +189,7 @@ static void stm32_ipcc_shutdown(struct mbox_chan *link)
 					       controller);
 
 	/* mask rx/tx interrupt */
-	stm32_ipcc_set_bits(ipcc->reg_proc + IPCC_XMR,
+	stm32_ipcc_set_bits(&ipcc->lock, ipcc->reg_proc + IPCC_XMR,
 			    RX_BIT_CHAN(chan) | TX_BIT_CHAN(chan));
 
 	clk_disable_unprepare(ipcc->clk);
@@ -208,6 +222,8 @@ static int stm32_ipcc_probe(struct platform_device *pdev)
 	if (!ipcc)
 		return -ENOMEM;
 
+	spin_lock_init(&ipcc->lock);
+
 	/* proc_id */
 	if (of_property_read_u32(np, "st,proc-id", &ipcc->proc_id)) {
 		dev_err(dev, "Missing st,proc-id\n");
@@ -259,9 +275,10 @@ static int stm32_ipcc_probe(struct platform_device *pdev)
 	}
 
 	/* mask and enable rx/tx irq */
-	stm32_ipcc_set_bits(ipcc->reg_proc + IPCC_XMR,
+	stm32_ipcc_set_bits(&ipcc->lock, ipcc->reg_proc + IPCC_XMR,
 			    RX_BIT_MASK | TX_BIT_MASK);
-	stm32_ipcc_set_bits(ipcc->reg_proc + IPCC_XCR, XCR_RXOIE | XCR_TXOIE);
+	stm32_ipcc_set_bits(&ipcc->lock, ipcc->reg_proc + IPCC_XCR,
+			    XCR_RXOIE | XCR_TXOIE);
 
 	/* wakeup */
 	if (of_property_read_bool(np, "wakeup-source")) {

drivers/mailbox/tegra-hsp.c

@@ -775,18 +775,28 @@ static int __maybe_unused tegra_hsp_resume(struct device *dev)
 {
 	struct tegra_hsp *hsp = dev_get_drvdata(dev);
 	unsigned int i;
+	struct tegra_hsp_doorbell *db;
 
-	for (i = 0; i < hsp->num_sm; i++) {
-		struct tegra_hsp_mailbox *mb = &hsp->mailboxes[i];
+	list_for_each_entry(db, &hsp->doorbells, list) {
+		if (db && db->channel.chan)
+			tegra_hsp_doorbell_startup(db->channel.chan);
+	}
+
+	if (hsp->mailboxes) {
+		for (i = 0; i < hsp->num_sm; i++) {
+			struct tegra_hsp_mailbox *mb = &hsp->mailboxes[i];
 
-		if (mb->channel.chan->cl)
-			tegra_hsp_mailbox_startup(mb->channel.chan);
+			if (mb->channel.chan->cl)
+				tegra_hsp_mailbox_startup(mb->channel.chan);
+		}
 	}
 
 	return 0;
 }
 
-static SIMPLE_DEV_PM_OPS(tegra_hsp_pm_ops, NULL, tegra_hsp_resume);
+static const struct dev_pm_ops tegra_hsp_pm_ops = {
+	.resume_noirq = tegra_hsp_resume,
+};
 
 static const struct tegra_hsp_db_map tegra186_hsp_db_map[] = {
 	{ "ccplex", TEGRA_HSP_DB_MASTER_CCPLEX, HSP_DB_CCPLEX, },

include/linux/omap-mailbox.h

@@ -6,7 +6,9 @@
 #ifndef OMAP_MAILBOX_H
 #define OMAP_MAILBOX_H
 
-typedef u32 mbox_msg_t;
+typedef uintptr_t mbox_msg_t;
+
+#define omap_mbox_message(data) (u32)(mbox_msg_t)(data)
 
 typedef int __bitwise omap_mbox_irq_t;
 #define IRQ_TX ((__force omap_mbox_irq_t) 1)