Commit fdea904e authored by Aisheng Dong's avatar Aisheng Dong Committed by Shawn Guo

arm64: dts: imx: add imx8qxp mek support

i.MX 8QuadXPlus is a quad (4x) Cortex-A35 proccessor with powerful
graphic and multimedia features. This patch adds imx8qxp mek board
support.

Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarDong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 3d91ba65
......@@ -20,3 +20,4 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2017~2018 NXP
*/
/dts-v1/;
#include "imx8qxp.dtsi"
/ {
model = "Freescale i.MX8QXP MEK";
compatible = "fsl,imx8qxp-mek", "fsl,imx8qxp";
chosen {
stdout-path = &adma_lpuart0;
};
memory@80000000 {
device_type = "memory";
reg = <0x00000000 0x80000000 0 0x40000000>;
};
reg_usdhc2_vmmc: usdhc2-vmmc {
compatible = "regulator-fixed";
regulator-name = "SD1_SPWR";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
&adma_lpuart0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart0>;
status = "okay";
};
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
phy-mode = "rgmii-id";
phy-handle = <&ethphy0>;
fsl,magic-packet;
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
ethphy0: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
};
ethphy1: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
};
};
};
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
bus-width = <8>;
no-sd;
no-sdio;
non-removable;
status = "okay";
};
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
bus-width = <4>;
vmmc-supply = <&reg_usdhc2_vmmc>;
cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>;
wp-gpios = <&lsio_gpio4 21 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&iomuxc {
pinctrl_fec1: fec1grp {
fsl,pins = <
IMX8QXP_ENET0_MDC_CONN_ENET0_MDC 0x06000020
IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020
IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x06000020
IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x06000020
IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x06000020
IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x06000020
IMX8QXP_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x06000020
IMX8QXP_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x06000020
IMX8QXP_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x06000020
IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x06000020
IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x06000020
IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x06000020
IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x06000020
IMX8QXP_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x06000020
>;
};
pinctrl_lpuart0: lpuart0grp {
fsl,pins = <
IMX8QXP_UART0_RX_ADMA_UART0_RX 0x06000020
IMX8QXP_UART0_TX_ADMA_UART0_TX 0x06000020
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041
IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021
IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021
IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021
IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021
IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021
IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021
IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021
IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021
IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021
IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041
IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x00000021
IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000021
IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000021
IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000021
IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021
IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021
>;
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment