ARM: dts: use macros in clock bindings for exynos5250

The patch replaces magic numbers with macros defined in DT header
in exynos5250 clock bindings.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

Documentation/devicetree/bindings/clock/exynos5250-clock.txt

@@ -13,163 +13,12 @@ Required Properties:
 
 - #clock-cells: should be 1.
 
-The following is the list of clocks generated by the controller. Each clock is
-assigned an identifier and client nodes use this identifier to specify the
-clock which they consume.
-
-
-       [Core Clocks]
-
-  Clock			ID
-  ----------------------------
-
-  fin_pll		1
-
-  [Clock Gate for Special Clocks]
-
-  Clock			ID
-  ----------------------------
-
-  sclk_cam_bayer	128
-  sclk_cam0		129
-  sclk_cam1		130
-  sclk_gscl_wa		131
-  sclk_gscl_wb		132
-  sclk_fimd1		133
-  sclk_mipi1		134
-  sclk_dp		135
-  sclk_hdmi		136
-  sclk_pixel		137
-  sclk_audio0		138
-  sclk_mmc0		139
-  sclk_mmc1		140
-  sclk_mmc2		141
-  sclk_mmc3		142
-  sclk_sata		143
-  sclk_usb3		144
-  sclk_jpeg		145
-  sclk_uart0		146
-  sclk_uart1		147
-  sclk_uart2		148
-  sclk_uart3		149
-  sclk_pwm		150
-  sclk_audio1		151
-  sclk_audio2		152
-  sclk_spdif		153
-  sclk_spi0		154
-  sclk_spi1		155
-  sclk_spi2		156
-  div_i2s1		157
-  div_i2s2		158
-  sclk_hdmiphy		159
-  div_pcm0		160
-
-
-   [Peripheral Clock Gates]
-
-  Clock			ID
-  ----------------------------
-
-  gscl0			256
-  gscl1			257
-  gscl2			258
-  gscl3			259
-  gscl_wa		260
-  gscl_wb		261
-  smmu_gscl0		262
-  smmu_gscl1		263
-  smmu_gscl2		264
-  smmu_gscl3		265
-  mfc			266
-  smmu_mfcl		267
-  smmu_mfcr		268
-  rotator		269
-  jpeg			270
-  mdma1			271
-  smmu_rotator		272
-  smmu_jpeg		273
-  smmu_mdma1		274
-  pdma0			275
-  pdma1			276
-  sata			277
-  usbotg		278
-  mipi_hsi		279
-  sdmmc0		280
-  sdmmc1		281
-  sdmmc2		282
-  sdmmc3		283
-  sromc			284
-  usb2			285
-  usb3			286
-  sata_phyctrl		287
-  sata_phyi2c		288
-  uart0			289
-  uart1			290
-  uart2			291
-  uart3			292
-  uart4			293
-  i2c0			294
-  i2c1			295
-  i2c2			296
-  i2c3			297
-  i2c4			298
-  i2c5			299
-  i2c6			300
-  i2c7			301
-  i2c_hdmi		302
-  adc			303
-  spi0			304
-  spi1			305
-  spi2			306
-  i2s1			307
-  i2s2			308
-  pcm1			309
-  pcm2			310
-  pwm			311
-  spdif			312
-  ac97			313
-  hsi2c0		314
-  hsi2c1		315
-  hs12c2		316
-  hs12c3		317
-  chipid		318
-  sysreg		319
-  pmu			320
-  cmu_top		321
-  cmu_core		322
-  cmu_mem		323
-  tzpc0			324
-  tzpc1			325
-  tzpc2			326
-  tzpc3			327
-  tzpc4			328
-  tzpc5			329
-  tzpc6			330
-  tzpc7			331
-  tzpc8			332
-  tzpc9			333
-  hdmi_cec		334
-  mct			335
-  wdt			336
-  rtc			337
-  tmu			338
-  fimd1			339
-  mie1			340
-  dsim0			341
-  dp			342
-  mixer			343
-  hdmi			344
-  g2d			345
-  mdma0			346
-  smmu_mdma0		347
-
-
-   [Clock Muxes]
-
-  Clock			ID
-  ----------------------------
-  mout_hdmi		1024
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume.
 
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos5250.h header and can be used in device
+tree sources.
 
 Example 1: An example of a clock controller node is listed below.
 
@@ -187,6 +36,6 @@ Example 2: UART controller node that consumes the clock generated by the clock
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13820000 0x100>;
 		interrupts = <0 54 0>;
-		clocks = <&clock 314>, <&clock 153>;
+		clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
 		clock-names = "uart", "clk_uart_baud0";
 	};