arm64: dts: ti: Use local header for pinctrl register values

The DTS uses hardware register values directly in pin controller pin
configuration and not an abstraction of any form.

These definitions were previously put in the bindings header to avoid
code duplication and to provide some context meaning (name), but they
do not fit the purpose of bindings.

Store the constants in a header next to DTS and use them instead of
bindings.
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/all/c4d53e9c-dac0-8ccc-dc86-faada324beba@linaro.org/
Link: https://lore.kernel.org/r/20230315155228.1566883-3-nm@ti.comSigned-off-by: Nishanth Menon <nm@ti.com>

arch/arm64/boot/dts/ti/k3-am62.dtsi

@@ -8,9 +8,10 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/k3.h>
 #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
+#include "k3-pinctrl.h"
+
 / {
 	model = "Texas Instruments K3 AM625 SoC";
 	compatible = "ti,am625";

arch/arm64/boot/dts/ti/k3-am62a.dtsi

@@ -8,9 +8,10 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/k3.h>
 #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
+#include "k3-pinctrl.h"
+
 / {
 	model = "Texas Instruments K3 AM62A SoC";
 	compatible = "ti,am62a7";

arch/arm64/boot/dts/ti/k3-am64.dtsi

@@ -8,9 +8,10 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/k3.h>
 #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
+#include "k3-pinctrl.h"
+
 / {
 	model = "Texas Instruments K3 AM642 SoC";
 	compatible = "ti,am642";

arch/arm64/boot/dts/ti/k3-am65.dtsi

@@ -8,9 +8,10 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/k3.h>
 #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
+#include "k3-pinctrl.h"
+
 / {
 	model = "Texas Instruments K3 AM654 SoC";
 	compatible = "ti,am654";

arch/arm64/boot/dts/ti/k3-j7200.dtsi

@@ -7,9 +7,10 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/k3.h>
 #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
+#include "k3-pinctrl.h"
+
 / {
 	model = "Texas Instruments K3 J7200 SoC";
 	compatible = "ti,j7200";

arch/arm64/boot/dts/ti/k3-j721e.dtsi

@@ -7,9 +7,10 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/k3.h>
 #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
+#include "k3-pinctrl.h"
+
 / {
 	model = "Texas Instruments K3 J721E SoC";
 	compatible = "ti,j721e";

arch/arm64/boot/dts/ti/k3-j721s2.dtsi

@@ -10,9 +10,10 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/k3.h>
 #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
+#include "k3-pinctrl.h"
+
 / {
 
 	model = "Texas Instruments K3 J721S2 SoC";

arch/arm64/boot/dts/ti/k3-j784s4.dtsi

@@ -10,9 +10,10 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/k3.h>
 #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
+#include "k3-pinctrl.h"
+
 / {
 	model = "Texas Instruments K3 J784S4 SoC";
 	compatible = "ti,j784s4";

arch/arm64/boot/dts/ti/k3-pinctrl.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This header provides constants for pinctrl bindings for TI's K3 SoC
+ * family.
+ *
+ * Copyright (C) 2018-2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+#ifndef DTS_ARM64_TI_K3_PINCTRL_H
+#define DTS_ARM64_TI_K3_PINCTRL_H
+
+#define PULLUDEN_SHIFT		(16)
+#define PULLTYPESEL_SHIFT	(17)
+#define RXACTIVE_SHIFT		(18)
+
+#define PULL_DISABLE		(1 << PULLUDEN_SHIFT)
+#define PULL_ENABLE		(0 << PULLUDEN_SHIFT)
+
+#define PULL_UP			(1 << PULLTYPESEL_SHIFT | PULL_ENABLE)
+#define PULL_DOWN		(0 << PULLTYPESEL_SHIFT | PULL_ENABLE)
+
+#define INPUT_EN		(1 << RXACTIVE_SHIFT)
+#define INPUT_DISABLE		(0 << RXACTIVE_SHIFT)
+
+/* Only these macros are expected be used directly in device tree files */
+#define PIN_OUTPUT		(INPUT_DISABLE | PULL_DISABLE)
+#define PIN_OUTPUT_PULLUP	(INPUT_DISABLE | PULL_UP)
+#define PIN_OUTPUT_PULLDOWN	(INPUT_DISABLE | PULL_DOWN)
+#define PIN_INPUT		(INPUT_EN | PULL_DISABLE)
+#define PIN_INPUT_PULLUP	(INPUT_EN | PULL_UP)
+#define PIN_INPUT_PULLDOWN	(INPUT_EN | PULL_DOWN)
+
+#define AM62AX_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
+#define AM62AX_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
+
+#define AM62X_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
+#define AM62X_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
+
+#define AM64X_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
+#define AM64X_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
+
+#define AM65X_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
+#define AM65X_WKUP_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
+
+#define J721E_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
+#define J721E_WKUP_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
+
+#define J721S2_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
+#define J721S2_WKUP_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
+
+#define J784S4_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
+#define J784S4_WKUP_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
+
+#endif