Commit fea6734a authored by Joerg Albert's avatar Joerg Albert Committed by John W. Linville

ath,ar9170: implemented conformance test limit calc. for tx power

apply the conformance test limits (CTL) stored in the eeprom upon
the values calculated for the tx power (ar->power_*).

This is based on the implementation in the vendor driver
(hal/hpmain.c, line 3700 ff.) with one difference:
If any ctl mode isn't found in the eeprom, we fall back to the "lower",
legacy modes (5GHT20,11A or 2GHT20,11G,11B). Otus only did 5GHT20->11A.

Currently CTL are applied for the FCC group only.
Signed-off-by: default avatarJoerg Albert <jal2@gmx.de>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 7f42c37a
......@@ -556,7 +556,6 @@ int ar9170_init_phy(struct ar9170 *ar, enum ieee80211_band band)
if (err)
return err;
/* TODO: (heavy clip) regulatory domain power level fine-tuning. */
err = ar9170_init_phy_from_eeprom(ar, is_2ghz, is_40mhz);
if (err)
return err;
......@@ -1238,6 +1237,164 @@ static int ar9170_set_freq_cal_data(struct ar9170 *ar,
return ar9170_regwrite_result();
}
static u8 ar9170_get_max_edge_power(struct ar9170 *ar,
struct ar9170_calctl_edges edges[],
u32 freq)
{
/* TODO: move somewhere else */
#define AR5416_MAX_RATE_POWER 63
int i;
u8 rc = AR5416_MAX_RATE_POWER;
u8 f;
if (freq < 3000)
f = freq - 2300;
else
f = (freq - 4800) / 5;
for (i = 0; i < AR5416_NUM_BAND_EDGES; i++) {
if (edges[i].channel == 0xff)
break;
if (f == edges[i].channel) {
/* exact freq match */
rc = edges[i].power_flags & ~AR9170_CALCTL_EDGE_FLAGS;
break;
}
if (i > 0 && f < edges[i].channel) {
if (f > edges[i-1].channel &&
edges[i-1].power_flags & AR9170_CALCTL_EDGE_FLAGS) {
/* lower channel has the inband flag set */
rc = edges[i-1].power_flags &
~AR9170_CALCTL_EDGE_FLAGS;
}
break;
}
}
if (i == AR5416_NUM_BAND_EDGES) {
if (f > edges[i-1].channel &&
edges[i-1].power_flags & AR9170_CALCTL_EDGE_FLAGS) {
/* lower channel has the inband flag set */
rc = edges[i-1].power_flags &
~AR9170_CALCTL_EDGE_FLAGS;
}
}
return rc;
}
/* calculate the conformance test limits and apply them to ar->power*
* (derived from otus hal/hpmain.c, line 3706 ff.)
*/
static void ar9170_calc_ctl(struct ar9170 *ar, u32 freq, enum ar9170_bw bw)
{
u8 ctl_grp; /* CTL group */
u8 ctl_idx; /* CTL index */
int i, j;
struct ctl_modes {
u8 ctl_mode;
u8 max_power;
u8 *pwr_cal_data;
int pwr_cal_len;
} *modes;
/* order is relevant in the mode_list_*: we fall back to the
* lower indices if any mode is missed in the EEPROM.
*/
struct ctl_modes mode_list_2ghz[] = {
{ CTL_11B, 0, ar->power_2G_cck, 4 },
{ CTL_11G, 0, ar->power_2G_ofdm, 4 },
{ CTL_2GHT20, 0, ar->power_2G_ht20, 8 },
{ CTL_2GHT40, 0, ar->power_2G_ht40, 8 },
};
struct ctl_modes mode_list_5ghz[] = {
{ CTL_11A, 0, ar->power_5G_leg, 4 },
{ CTL_5GHT20, 0, ar->power_5G_ht20, 8 },
{ CTL_5GHT40, 0, ar->power_5G_ht40, 8 },
};
int nr_modes;
#define EDGES(c, n) (ar->eeprom.ctl_data[c].control_edges[n])
/* TODO: investigate the differences between OTUS'
* hpreg.c::zfHpGetRegulatoryDomain() and
* ath/regd.c::ath_regd_get_band_ctl() -
* e.g. for FCC3_WORLD the OTUS procedure
* always returns CTL_FCC, while the one in ath/ delivers
* CTL_ETSI for 2GHz and CTL_FCC for 5GHz.
*/
ctl_grp = ath_regd_get_band_ctl(&ar->common.regulatory,
ar->hw->conf.channel->band);
/* ctl group not found - either invalid band (NO_CTL) or ww roaming */
if (ctl_grp == NO_CTL || ctl_grp == SD_NO_CTL)
ctl_grp = CTL_FCC;
if (ctl_grp != CTL_FCC)
/* skip CTL and heavy clip for CTL_MKK and CTL_ETSI */
return;
if (ar->hw->conf.channel->band == IEEE80211_BAND_2GHZ) {
modes = mode_list_2ghz;
nr_modes = ARRAY_SIZE(mode_list_2ghz);
} else {
modes = mode_list_5ghz;
nr_modes = ARRAY_SIZE(mode_list_5ghz);
}
for (i = 0; i < nr_modes; i++) {
u8 c = ctl_grp | modes[i].ctl_mode;
for (ctl_idx = 0; ctl_idx < AR5416_NUM_CTLS; ctl_idx++)
if (c == ar->eeprom.ctl_index[ctl_idx])
break;
if (ctl_idx < AR5416_NUM_CTLS) {
int f_off = 0;
/* adjust freq for 40MHz */
if (modes[i].ctl_mode == CTL_2GHT40 ||
modes[i].ctl_mode == CTL_5GHT40) {
if (bw == AR9170_BW_40_BELOW)
f_off = -10;
else
f_off = 10;
}
modes[i].max_power =
ar9170_get_max_edge_power(ar, EDGES(ctl_idx, 1),
freq+f_off);
/* TODO: check if the regulatory max. power is
* controlled by cfg80211 for DFS
* (hpmain applies it to max_power itself for DFS freq)
*/
} else {
/* Workaround in otus driver, hpmain.c, line 3906:
* if no data for 5GHT20 are found, take the
* legacy 5G value.
* We extend this here to fallback from any other *HT or
* 11G, too.
*/
int k = i;
modes[i].max_power = AR5416_MAX_RATE_POWER;
while (k-- > 0) {
if (modes[k].max_power !=
AR5416_MAX_RATE_POWER) {
modes[i].max_power = modes[k].max_power;
break;
}
}
}
/* apply max power to pwr_cal_data (ar->power_*) */
for (j = 0; j < modes[i].pwr_cal_len; j++) {
modes[i].pwr_cal_data[j] = min(modes[i].pwr_cal_data[j],
modes[i].max_power);
}
}
#undef EDGES
}
static int ar9170_set_power_cal(struct ar9170 *ar, u32 freq, enum ar9170_bw bw)
{
struct ar9170_calibration_target_power_legacy *ctpl;
......@@ -1340,6 +1497,12 @@ static int ar9170_set_power_cal(struct ar9170 *ar, u32 freq, enum ar9170_bw bw)
ctph[idx + 1].power[n]);
}
/* calc. conformance test limits and apply to ar->power*[] */
ar9170_calc_ctl(ar, freq, bw);
/* TODO: (heavy clip) regulatory domain power level fine-tuning. */
/* set ACK/CTS TX power */
ar9170_regwrite_begin(ar);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment