Merge tag 'soc-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC specific changes from Arnd Bergmann:
 "Lots of changes specific to one of the SoC families.  Some that stick
  out are:

   - mach-qcom gains new features, most importantly SMP support for the
     newer chips (Stephen Boyd, Rohit Vaswani)
   - mvebu gains support for three new SoCs: Armada 375, 380 and 385
     (Thomas Petazzoni and Free-electrons team)
   - SMP support for Rockchips (Heiko Stübner)
   - Lots of i.MX changes (Shawn Guo)
   - Added support for BCM5301x SoC (Hauke Mehrtens)
   - Multiplatform support for Marvell Kirkwood and Dove (Andrew Lunn
     and Sebastian Hesselbarth doing the final part of a long journey)
   - Unify davinci platforms and remove obsolete ones (Sekhar Nori, Arnd
     Bergmann)"

* tag 'soc-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (126 commits)
  ARM: sunxi: Select HAVE_ARM_ARCH_TIMER
  ARM: cache-tauros2: remove ARMv6 code
  ARM: mvebu: don't select CONFIG_NEON
  ARM: davinci: fix DT booting with default defconfig
  ARM: configs: bcm_defconfig: enable bcm590xx regulator support
  ARM: davinci: remove tnetv107x support
  MAINTAINERS: Update ARM STi maintainers
  ARM: restrict BCM_KONA_UART to ARCH_BCM_MOBILE
  ARM: bcm21664: Add board support.
  ARM: sunxi: Add the new watchog compatibles to the reboot code
  ARM: enable ARM_HAS_SG_CHAIN for multiplatform
  ARM: davinci: remove da8xx_omapl_defconfig
  ARM: davinci: da8xx: fix multiple watchdog device registration
  ARM: davinci: add da8xx specific configs to davinci_all_defconfig
  ARM: davinci: enable da8xx build concurrently with older devices
  ARM: BCM5301X: workaround suppress fault
  ARM: BCM5301X: add early debugging support
  ARM: BCM5301X: initial support for the BCM5301X/BCM470X SoCs with ARM CPU
  ARM: mach-bcm: Remove GENERIC_TIME
  ARM: shmobile: APMU: Fix warnings due to improper printk formats
  ...

Documentation/arm/Marvell/README

@@ -83,14 +83,24 @@ EBU Armada family
         88F6710
         88F6707
         88F6W11
+    Product Brief: http://www.marvell.com/embedded-processors/armada-300/assets/Marvell_ARMADA_370_SoC.pdf
+
+  Armada 375 Flavors:
+	88F6720
+    Product Brief: http://www.marvell.com/embedded-processors/armada-300/assets/ARMADA_375_SoC-01_product_brief.pdf
+
+  Armada 380/385 Flavors:
+	88F6810
+	88F6820
+	88F6828
 
   Armada XP Flavors:
         MV78230
         MV78260
         MV78460
     NOTE: not to be confused with the non-SMP 78xx0 SoCs
+    Product Brief: http://www.marvell.com/embedded-processors/armada-xp/assets/Marvell-ArmadaXP-SoC-product%20brief.pdf
 
-  Product Brief: http://www.marvell.com/embedded-processors/armada-xp/assets/Marvell-ArmadaXP-SoC-product%20brief.pdf
   No public datasheet available.
 
   Core: Sheeva ARMv7 compatible

Documentation/devicetree/bindings/arm/armada-375.txt

+Marvell Armada 375 Platforms Device Tree Bindings
+-------------------------------------------------
+
+Boards with a SoC of the Marvell Armada 375 family shall have the
+following property:
+
+Required root node property:
+
+compatible: must contain "marvell,armada375"

Documentation/devicetree/bindings/arm/armada-38x.txt

+Marvell Armada 38x Platforms Device Tree Bindings
+-------------------------------------------------
+
+Boards with a SoC of the Marvell Armada 38x family shall have the
+following property:
+
+Required root node property:
+
+ - compatible: must contain either "marvell,armada380" or
+   "marvell,armada385" depending on the variant of the SoC being used.

Documentation/devicetree/bindings/arm/bcm4708.txt

+Broadcom BCM4708 device tree bindings
+-------------------------------------------
+
+Boards with the BCM4708 SoC shall have the following properties:
+
+Required root node property:
+
+compatible = "brcm,bcm4708";

Documentation/devicetree/bindings/arm/cpus.txt

@@ -180,7 +180,11 @@ nodes to be present and contain the properties described below.
 			  be one of:
 			     "spin-table"
 			     "psci"
-			# On ARM 32-bit systems this property is optional.
+			# On ARM 32-bit systems this property is optional and
+			  can be one of:
+			    "qcom,gcc-msm8660"
+			    "qcom,kpss-acc-v1"
+			    "qcom,kpss-acc-v2"
 
 	- cpu-release-addr
 		Usage: required for systems that have an "enable-method"
@@ -191,6 +195,21 @@ nodes to be present and contain the properties described below.
 			  property identifying a 64-bit zero-initialised
 			  memory location.
 
+	- qcom,saw
+		Usage: required for systems that have an "enable-method"
+		       property value of "qcom,kpss-acc-v1" or
+		       "qcom,kpss-acc-v2"
+		Value type: <phandle>
+		Definition: Specifies the SAW[1] node associated with this CPU.
+
+	- qcom,acc
+		Usage: required for systems that have an "enable-method"
+		       property value of "qcom,kpss-acc-v1" or
+		       "qcom,kpss-acc-v2"
+		Value type: <phandle>
+		Definition: Specifies the ACC[2] node associated with this CPU.
+
+
 Example 1 (dual-cluster big.LITTLE system 32-bit):
 
 	cpus {
@@ -382,3 +401,7 @@ cpus {
 		cpu-release-addr = <0 0x20000000>;
 	};
 };
+
+--
+[1] arm/msm/qcom,saw2.txt
+[2] arm/msm/qcom,kpss-acc.txt

Documentation/devicetree/bindings/arm/mrvl/feroceon.txt

+* Marvell Feroceon Cache
+
+Required properties:
+- compatible : Should be either "marvell,feroceon-cache" or
+  	       "marvell,kirkwood-cache".
+
+Optional properties:
+- reg        : Address of the L2 cache control register. Mandatory for
+  	       "marvell,kirkwood-cache", not used by "marvell,feroceon-cache"
+
+
+Example:
+		l2: l2-cache@20128 {
+			compatible = "marvell,kirkwood-cache";
+			reg = <0x20128 0x4>;
+		};

Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt

+Krait Processor Sub-system (KPSS) Application Clock Controller (ACC)
+
+The KPSS ACC provides clock, power domain, and reset control to a Krait CPU.
+There is one ACC register region per CPU within the KPSS remapped region as
+well as an alias register region that remaps accesses to the ACC associated
+with the CPU accessing the region.
+
+PROPERTIES
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: should be one of:
+			"qcom,kpss-acc-v1"
+			"qcom,kpss-acc-v2"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: the first element specifies the base address and size of
+		    the register region. An optional second element specifies
+		    the base address and size of the alias register region.
+
+Example:
+
+	clock-controller@2088000 {
+		compatible = "qcom,kpss-acc-v2";
+		reg = <0x02088000 0x1000>,
+		      <0x02008000 0x1000>;
+	};

Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt

+SPM AVS Wrapper 2 (SAW2)
+
+The SAW2 is a wrapper around the Subsystem Power Manager (SPM) and the
+Adaptive Voltage Scaling (AVS) hardware. The SPM is a programmable
+micro-controller that transitions a piece of hardware (like a processor or
+subsystem) into and out of low power modes via a direct connection to
+the PMIC. It can also be wired up to interact with other processors in the
+system, notifying them when a low power state is entered or exited.
+
+PROPERTIES
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: shall contain "qcom,saw2". A more specific value should be
+		    one of:
+			 "qcom,saw2-v1"
+			 "qcom,saw2-v1.1"
+			 "qcom,saw2-v2"
+			 "qcom,saw2-v2.1"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: the first element specifies the base address and size of
+		    the register region. An optional second element specifies
+		    the base address and size of the alias register region.
+
+
+Example:
+
+	regulator@2099000 {
+		compatible = "qcom,saw2";
+		reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
+	};

Documentation/devicetree/bindings/arm/mvebu-system-controller.txt

 MVEBU System Controller
 -----------------------
-MVEBU (Marvell SOCs: Armada 370/XP, Dove, mv78xx0, Kirkwood, Orion5x)
+MVEBU (Marvell SOCs: Armada 370/375/XP, Dove, mv78xx0, Kirkwood, Orion5x)
 
 Required properties:
 
 - compatible: one of:
 	- "marvell,orion-system-controller"
 	- "marvell,armada-370-xp-system-controller"
+	- "marvell,armada-375-system-controller"
 - reg: Should contain system controller registers location and length.
 
 Example:

Documentation/devicetree/bindings/arm/rockchip/pmu.txt

+Rockchip power-management-unit:
+-------------------------------
+
+The pmu is used to turn off and on different power domains of the SoCs
+This includes the power to the CPU cores.
+
+Required node properties:
+- compatible value : = "rockchip,rk3066-pmu";
+- reg : physical base address and the size of the registers window
+
+Example:
+
+	pmu@20004000 {
+		compatible = "rockchip,rk3066-pmu";
+		reg = <0x20004000 0x100>;
+	};

Documentation/devicetree/bindings/arm/rockchip/smp-sram.txt

+Rockchip SRAM for smp bringup:
+------------------------------
+
+Rockchip's smp-capable SoCs use the first part of the sram for the bringup
+of the cores. Once the core gets powered up it executes the code that is
+residing at the very beginning of the sram.
+
+Therefore a reserved section sub-node has to be added to the mmio-sram
+declaration.
+
+Required sub-node properties:
+- compatible : should be "rockchip,rk3066-smp-sram"
+
+The rest of the properties should follow the generic mmio-sram discription
+found in ../../misc/sram.txt
+
+Example:
+
+	sram: sram@10080000 {
+		compatible = "mmio-sram";
+		reg = <0x10080000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		smp-sram@10080000 {
+			compatible = "rockchip,rk3066-smp-sram";
+			reg = <0x10080000 0x50>;
+		};
+	};

Documentation/devicetree/bindings/bus/imx-weim.txt

@@ -8,7 +8,12 @@ The actual devices are instantiated from the child nodes of a WEIM node.
 
 Required properties:
 
- - compatible:		Should be set to "fsl,<soc>-weim"
+ - compatible:		Should contain one of the following:
+			  "fsl,imx1-weim"
+			  "fsl,imx27-weim"
+			  "fsl,imx51-weim"
+			  "fsl,imx50-weim"
+			  "fsl,imx6q-weim"
  - reg:			A resource specifier for the register space
 			(see the example below)
  - clocks:		the clock, see the example below.
@@ -19,6 +24,26 @@ Required properties:
 
 			   <cs-number> 0 <physical address of mapping> <size>
 
+Optional properties:
+
+ - fsl,weim-cs-gpr:	For "fsl,imx50-weim" and "fsl,imx6q-weim" type of
+			devices, it should be the phandle to the system General
+			Purpose Register controller that contains WEIM CS GPR
+			register, e.g. IOMUXC_GPR1 on i.MX6Q.  IOMUXC_GPR1[11:0]
+			should be set up as one of the following 4 possible
+			values depending on the CS space configuration.
+
+			IOMUXC_GPR1[11:0]    CS0    CS1    CS2    CS3
+			---------------------------------------------
+				05	    128M     0M     0M     0M
+				033          64M    64M     0M     0M
+				0113         64M    32M    32M     0M
+				01111        32M    32M    32M    32M
+
+			In case that the property is absent, the reset value or
+			what bootloader sets up in IOMUXC_GPR1[11:0] will be
+			used.
+
 Timing property for child nodes. It is mandatory, not optional.
 
  - fsl,weim-cs-timing:	The timing array, contains timing values for the
@@ -43,6 +68,7 @@ Example for an imx6q-sabreauto board, the NOR flash connected to the WEIM:
 		#address-cells = <2>;
 		#size-cells = <1>;
 		ranges = <0 0 0x08000000 0x08000000>;
+		fsl,weim-cs-gpr = <&gpr>;
 
 		nor@0,0 {
 			compatible = "cfi-flash";

Documentation/devicetree/bindings/interrupt-controller/cirrus,clps711x-intc.txt

+Cirrus Logic CLPS711X Interrupt Controller
+
+Required properties:
+
+- compatible: Should be "cirrus,clps711x-intc".
+- reg: Specifies base physical address of the registers set.
+- interrupt-controller: Identifies the node as an interrupt controller.
+- #interrupt-cells: Specifies the number of cells needed to encode an
+  interrupt source. The value shall be 1.
+
+The interrupt sources are as follows:
+ID	Name	Description
+---------------------------
+1:	BLINT	Battery low (FIQ)
+3:	MCINT	Media changed (FIQ)
+4:	CSINT	CODEC sound
+5:	EINT1	External 1
+6:	EINT2	External 2
+7:	EINT3	External 3
+8:	TC1OI	TC1 under flow
+9:	TC2OI	TC2 under flow
+10:	RTCMI	RTC compare match
+11:	TINT	64Hz tick
+12:	UTXINT1	UART1 transmit FIFO half empty
+13:	URXINT1	UART1 receive FIFO half full
+14:	UMSINT	UART1 modem status changed
+15:	SSEOTI	SSI1 end of transfer
+16:	KBDINT	Keyboard
+17:	SS2RX	SSI2 receive FIFO half or greater full
+18:	SS2TX	SSI2 transmit FIFO less than half empty
+28:	UTXINT2	UART2 transmit FIFO half empty
+29:	URXINT2	UART2 receive FIFO half full
+32:	DAIINT	DAI interface (FIQ)
+
+Example:
+	intc: interrupt-controller {
+		compatible = "cirrus,clps711x-intc";
+		reg = <0x80000000 0x4000>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};

MAINTAINERS

@@ -1291,13 +1291,21 @@ S:	Maintained
 F:	drivers/clk/socfpga/
 
 ARM/STI ARCHITECTURE
-M:	Srinivas Kandagatla <srinivas.kandagatla@st.com>
-M:	Stuart Menefy <stuart.menefy@st.com>
+M:	Srinivas Kandagatla <srinivas.kandagatla@gmail.com>
+M:	Maxime Coquelin <maxime.coquelin@st.com>
+M:	Patrice Chotard <patrice.chotard@st.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	kernel@stlinux.com
 W:	http://www.stlinux.com
 S:	Maintained
 F:	arch/arm/mach-sti/
+F:	arch/arm/boot/dts/sti*
+F:	drivers/clocksource/arm_global_timer.c
+F:	drivers/reset/sti/
+F:	drivers/pinctrl/pinctrl-st.c
+F:	drivers/media/rc/st_rc.c
+F:	drivers/i2c/busses/i2c-st.c
+F:	drivers/tty/serial/st-asc.c
 
 ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
@@ -1907,6 +1915,14 @@ F:	arch/arm/boot/dts/bcm2835*
 F:	arch/arm/configs/bcm2835_defconfig
 F:	drivers/*/*bcm2835*
 
+BROADCOM BCM5301X ARM ARCHICTURE
+M:	Hauke Mehrtens <hauke@hauke-m.de>
+L:	linux-arm-kernel@lists.infradead.org
+S:	Maintained
+F:	arch/arm/mach-bcm/bcm_5301x.c
+F:	arch/arm/boot/dts/bcm5301x.dtsi
+F:	arch/arm/boot/dts/bcm470*
+
 BROADCOM TG3 GIGABIT ETHERNET DRIVER
 M:	Nithin Nayak Sujir <nsujir@broadcom.com>
 M:	Michael Chan <mchan@broadcom.com>

arch/arm/Kconfig

@@ -310,6 +310,7 @@ config ARCH_MULTIPLATFORM
 	bool "Allow multiple platforms to be selected"
 	depends on MMU
 	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select ARM_HAS_SG_CHAIN
 	select ARM_PATCH_PHYS_VIRT
 	select AUTO_ZRELADDR
 	select COMMON_CLK
@@ -393,8 +394,6 @@ config ARCH_CLPS711X
 	select CPU_ARM720T
 	select GENERIC_CLOCKEVENTS
 	select MFD_SYSCON
-	select MULTI_IRQ_HANDLER
-	select SPARSE_IRQ
 	help
 	  Support for Cirrus Logic 711x/721x/731x based boards.
 
@@ -909,7 +908,7 @@ config ARCH_MULTI_V5
 	bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)"
 	depends on !ARCH_MULTI_V6_V7
 	select ARCH_MULTI_V4_V5
-	select CPU_ARM926T if (!CPU_ARM946E || CPU_ARM1020 || \
+	select CPU_ARM926T if !(CPU_ARM946E || CPU_ARM1020 || \
 		CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \
 		CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_FEROCEON)
 

arch/arm/Kconfig.debug

@@ -106,9 +106,14 @@ choice
 		depends on ARCH_BCM2835
 		select DEBUG_UART_PL01X
 
+	config DEBUG_BCM_5301X
+		bool "Kernel low-level debugging on BCM5301X UART1"
+		depends on ARCH_BCM_5301X
+		select DEBUG_UART_PL01X
+
 	config DEBUG_BCM_KONA_UART
 		bool "Kernel low-level debugging messages via BCM KONA UART"
-		depends on ARCH_BCM
+		depends on ARCH_BCM_MOBILE
 		select DEBUG_UART_8250
 		help
 		  Say Y here if you want kernel low-level debugging support
@@ -171,15 +176,6 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to UART0 serial port on DaVinci DMx devices.
 
-	config DEBUG_DAVINCI_TNETV107X_UART1
-		bool "Kernel low-level debugging on DaVinci TNETV107x using UART1"
-		depends on ARCH_DAVINCI_TNETV107X
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART1 serial port on DaVinci TNETV107X
-		  devices.
-
 	config DEBUG_ZYNQ_UART0
 		bool "Kernel low-level debugging on Xilinx Zynq using UART0"
 		depends on ARCH_ZYNQ
@@ -1014,7 +1010,6 @@ config DEBUG_UART_PHYS
 	default 0x02530c00 if DEBUG_KEYSTONE_UART0
 	default 0x02531000 if DEBUG_KEYSTONE_UART1
 	default 0x03010fe0 if ARCH_RPC
-	default 0x08108300 if DEBUG_DAVINCI_TNETV107X_UART1
 	default 0x10009000 if DEBUG_REALVIEW_STD_PORT || DEBUG_CNS3XXX || \
 				DEBUG_VEXPRESS_UART0_CA9
 	default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT
@@ -1023,6 +1018,7 @@ config DEBUG_UART_PHYS
 	default 0x101f1000 if ARCH_VERSATILE
 	default 0x101fb000 if DEBUG_NOMADIK_UART
 	default 0x16000000 if ARCH_INTEGRATOR
+	default 0x18000300 if DEBUG_BCM_5301X
 	default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1
 	default 0x20060000 if DEBUG_RK29_UART0
 	default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
@@ -1071,6 +1067,7 @@ config DEBUG_UART_VIRT
 	default 0xf0009000 if DEBUG_CNS3XXX
 	default 0xf01fb000 if DEBUG_NOMADIK_UART
 	default 0xf0201000 if DEBUG_BCM2835
+	default 0xf1000300 if DEBUG_BCM_5301X
 	default 0xf11f1000 if ARCH_VERSATILE
 	default 0xf1600000 if ARCH_INTEGRATOR
 	default 0xf1c28000 if DEBUG_SUNXI_UART0
@@ -1110,7 +1107,6 @@ config DEBUG_UART_VIRT
 	default 0xfed12000 if ARCH_KIRKWOOD
 	default 0xfedc0000 if ARCH_EP93XX
 	default 0xfee003f8 if FOOTBRIDGE
-	default 0xfee08300 if DEBUG_DAVINCI_TNETV107X_UART1
 	default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
 	default 0xfef36000 if DEBUG_HIGHBANK_UART
 	default 0xfee82340 if ARCH_IOP13XX
@@ -1135,7 +1131,7 @@ config DEBUG_UART_8250_WORD
 	default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART || \
 		ARCH_KEYSTONE || \
 		DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \
-		DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_DAVINCI_TNETV107X_UART1 || \
+		DEBUG_DAVINCI_DA8XX_UART2 || \
 		DEBUG_BCM_KONA_UART
 
 config DEBUG_UART_8250_FLOW_CONTROL

arch/arm/boot/dts/Makefile

@@ -59,7 +59,7 @@ dtb-$(CONFIG_ARCH_BERLIN) += \
 	berlin2cd-google-chromecast.dtb
 dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \
 	da850-evm.dtb
-dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
+dtb-$(CONFIG_MACH_DOVE) += dove-cm-a510.dtb \
 	dove-cubox.dtb \
 	dove-d2plug.dtb \
 	dove-d3plug.dtb \
@@ -86,8 +86,8 @@ dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
 	ecx-2000.dtb
 dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
 	integratorcp.dtb
-dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
-dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
+kirkwood := \
+	kirkwood-cloudbox.dtb \
 	kirkwood-db-88f6281.dtb \
 	kirkwood-db-88f6282.dtb \
 	kirkwood-dns320.dtb \
@@ -121,6 +121,9 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
 	kirkwood-topkick.dtb \
 	kirkwood-ts219-6281.dtb \
 	kirkwood-ts219-6282.dtb
+dtb-$(CONFIG_ARCH_KIRKWOOD) += $(kirkwood)
+dtb-$(CONFIG_MACH_KIRKWOOD) += $(kirkwood)
+dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
 dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
 dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \

arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts

@@ -122,4 +122,66 @@ button@2 {
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	dsa@0 {
+		compatible = "marvell,dsa";
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		dsa,ethernet = <&eth0>;
+		dsa,mii-bus = <&ethphy0>;
+
+		switch@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0>;	/* MDIO address 0, switch 0 in tree */
+
+			port@0 {
+				reg = <0>;
+				label = "lan1";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan2";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan3";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan4";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "wan";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+			};
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@ff {
+		reg = <0xff>; 	/* No phy attached */
+		speed = <1000>;
+		duplex = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
 };

arch/arm/boot/dts/qcom-msm8960.dtsi

@@ -9,6 +9,12 @@ / {
 	compatible = "qcom,msm8960";
 	interrupt-parent = <&intc>;
 
+	cpu-pmu {
+		compatible = "qcom,krait-pmu";
+		interrupts = <1 10 0x304>;
+		qcom,no-pc-write;
+	};
+
 	intc: interrupt-controller@2000000 {
 		compatible = "qcom,msm-qgic2";
 		interrupt-controller;

arch/arm/boot/dts/qcom-msm8974.dtsi

@@ -9,6 +9,11 @@ / {
 	compatible = "qcom,msm8974";
 	interrupt-parent = <&intc>;
 
+	cpu-pmu {
+		compatible = "qcom,krait-pmu";
+		interrupts = <1 7 0xf04>;
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;

arch/arm/boot/dts/rk3066a.dtsi

@@ -64,6 +64,19 @@ timer@2000e000 {
 			clock-names = "timer", "pclk";
 		};
 
+		sram: sram@10080000 {
+			compatible = "mmio-sram";
+			reg = <0x10080000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x10080000 0x10000>;
+
+			smp-sram@0 {
+				compatible = "rockchip,rk3066-smp-sram";
+				reg = <0x0 0x50>;
+			};
+		};
+
 		pinctrl@20008000 {
 			compatible = "rockchip,rk3066a-pinctrl";
 			reg = <0x20008000 0x150>;

arch/arm/boot/dts/rk3188.dtsi

@@ -60,6 +60,19 @@ local-timer@1013c600 {
 			interrupts = <GIC_PPI 13 0xf04>;
 		};
 
+		sram: sram@10080000 {
+			compatible = "mmio-sram";
+			reg = <0x10080000 0x8000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x10080000 0x8000>;
+
+			smp-sram@0 {
+				compatible = "rockchip,rk3066-smp-sram";
+				reg = <0x0 0x50>;
+			};
+		};
+
 		pinctrl@20008000 {
 			compatible = "rockchip,rk3188-pinctrl";
 			reg = <0x20008000 0xa0>,

arch/arm/boot/dts/rk3xxx.dtsi

@@ -26,6 +26,16 @@ soc {
 		compatible = "simple-bus";
 		ranges;
 
+		scu@1013c000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0x1013c000 0x100>;
+		};
+
+		pmu@20004000 {
+			compatible = "rockchip,rk3066-pmu";
+			reg = <0x20004000 0x100>;
+		};
+
 		gic: interrupt-controller@1013d000 {
 			compatible = "arm,cortex-a9-gic";
 			interrupt-controller;

arch/arm/configs/bcm_defconfig

@@ -79,6 +79,13 @@ CONFIG_HW_RANDOM=y
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 # CONFIG_HWMON is not set
+CONFIG_MFD_BCM590XX=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
+CONFIG_REGULATOR_USERSPACE_CONSUMER=y
+CONFIG_REGULATOR_BCM590XX=y
+
 CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_FB=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y

arch/arm/configs/da8xx_omapl_defconfig

-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CGROUPS=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_DAVINCI=y
-CONFIG_ARCH_DAVINCI_DA830=y
-CONFIG_ARCH_DAVINCI_DA850=y
-CONFIG_MACH_DA8XX_DT=y
-CONFIG_MACH_MITYOMAPL138=y
-CONFIG_MACH_OMAPL138_HAWKBOARD=y
-CONFIG_DAVINCI_RESET_CLOCKS=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_LEDS=y
-CONFIG_USE_OF=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_IDLE=y
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_LRO is not set
-CONFIG_NETFILTER=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_FW_LOADER is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=1
-CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_EEPROM_AT24=y
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_NETDEVICES=y
-CONFIG_TUN=m
-CONFIG_LXT_PHY=y
-CONFIG_LSI_ET1011C_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_TI_DAVINCI_EMAC=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_NETCONSOLE=y
-CONFIG_NETPOLL_TRAP=y
-CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_EVDEV=m
-CONFIG_INPUT_EVBUG=m
-CONFIG_KEYBOARD_ATKBD=m
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_XTKBD=m
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_VT_CONSOLE is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_DAVINCI=y
-CONFIG_PINCTRL_SINGLE=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_DUMMY=y
-CONFIG_REGULATOR_TPS6507X=y
-CONFIG_FB=y
-CONFIG_FB_DA8XX=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_SOUND=m
-CONFIG_SND=m
-CONFIG_SND_SOC=m
-CONFIG_SND_DAVINCI_SOC=m
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_DMADEVICES=y
-CONFIG_TI_EDMA=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_XFS_FS=m
-CONFIG_INOTIFY=y
-CONFIG_AUTOFS4_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_MINIX_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-CONFIG_SMB_FS=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=m
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_TIMER_STATS=y
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_CCITT=m
-CONFIG_CRC_T10DIF=m

arch/arm/configs/davinci_all_defconfig

@@ -20,9 +20,14 @@ CONFIG_ARCH_DAVINCI_DM644x=y
 CONFIG_ARCH_DAVINCI_DM355=y
 CONFIG_ARCH_DAVINCI_DM646x=y
 CONFIG_ARCH_DAVINCI_DM365=y
+CONFIG_ARCH_DAVINCI_DA830=y
+CONFIG_ARCH_DAVINCI_DA850=y
+CONFIG_MACH_DA8XX_DT=y
 CONFIG_MACH_SFFSDR=y
 CONFIG_MACH_NEUROS_OSD2=y
 CONFIG_MACH_DM355_LEOPARD=y
+CONFIG_MACH_MITYOMAPL138=y
+CONFIG_MACH_OMAPL138_HAWKBOARD=y
 CONFIG_DAVINCI_MUX_DEBUG=y
 CONFIG_DAVINCI_MUX_WARNINGS=y
 CONFIG_DAVINCI_RESET_CLOCKS=y
@@ -32,8 +37,18 @@ CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
 CONFIG_LEDS=y
+CONFIG_USE_OF=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_IDLE=y
 CONFIG_PM_RUNTIME=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -57,6 +72,7 @@ CONFIG_MTD_CFI_AMDSTD=m
 CONFIG_MTD_PHYSMAP=m
 CONFIG_MTD_NAND=m
 CONFIG_MTD_NAND_DAVINCI=m
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=1
@@ -71,6 +87,7 @@ CONFIG_TUN=m
 CONFIG_LXT_PHY=y
 CONFIG_LSI_ET1011C_PHY=y
 CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
 CONFIG_TI_DAVINCI_EMAC=y
 CONFIG_DM9000=y
 # CONFIG_NETDEV_1000 is not set
@@ -97,15 +114,21 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=3
 # CONFIG_HW_RANDOM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_DAVINCI=y
+CONFIG_PINCTRL_SINGLE=y
 CONFIG_GPIO_PCF857X=y
 CONFIG_WATCHDOG=y
 CONFIG_DAVINCI_WATCHDOG=m
 CONFIG_MFD_DM355EVM_MSP=y
+CONFIG_TPS6507X=y
 CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TPS6507X=y
 CONFIG_FB=y
+CONFIG_FB_DA8XX=y
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y

arch/arm/configs/imx_v4_v5_defconfig

@@ -154,6 +154,7 @@ CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_MXC=y
 CONFIG_MMC=y
+CONFIG_MMC_UNSAFE_RESUME=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_ESDHC_IMX=y

arch/arm/configs/imx_v6_v7_defconfig

@@ -39,6 +39,8 @@ CONFIG_SOC_IMX53=y
 CONFIG_SOC_IMX6Q=y
 CONFIG_SOC_IMX6SL=y
 CONFIG_SOC_VF610=y
+CONFIG_PCI=y
+CONFIG_PCI_IMX6=y
 CONFIG_SMP=y
 CONFIG_VMSPLIT_2G=y
 CONFIG_PREEMPT_VOLUNTARY=y
@@ -165,6 +167,7 @@ CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_ANATOP=y
 CONFIG_REGULATOR_DA9052=y
+CONFIG_REGULATOR_GPIO=y
 CONFIG_REGULATOR_MC13783=y
 CONFIG_REGULATOR_MC13892=y
 CONFIG_REGULATOR_PFUZE100=y
@@ -186,6 +189,7 @@ CONFIG_LCD_L4F00242T03=y
 CONFIG_LCD_PLATFORM=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_PWM=y
+CONFIG_BACKLIGHT_GPIO=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 CONFIG_SOUND=y
@@ -211,6 +215,7 @@ CONFIG_USB_GADGET=y
 CONFIG_USB_ETH=m
 CONFIG_USB_MASS_STORAGE=m
 CONFIG_MMC=y
+CONFIG_MMC_UNSAFE_RESUME=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_ESDHC_IMX=y
@@ -225,6 +230,7 @@ CONFIG_LEDS_TRIGGER_BACKLIGHT=y
 CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_PCF8563=y
 CONFIG_RTC_DRV_MC13XXX=y
 CONFIG_RTC_DRV_MXC=y
 CONFIG_RTC_DRV_SNVS=y
@@ -277,6 +283,7 @@ CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_UTF8=y
+CONFIG_DEBUG_FS=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_PROVE_LOCKING=y

arch/arm/configs/multi_v7_defconfig

@@ -11,6 +11,7 @@ CONFIG_ARCH_MVEBU=y
 CONFIG_MACH_ARMADA_370=y
 CONFIG_MACH_ARMADA_XP=y
 CONFIG_ARCH_BCM=y
+CONFIG_ARCH_BCM_5301X=y
 CONFIG_ARCH_BCM_MOBILE=y
 CONFIG_ARCH_BERLIN=y
 CONFIG_MACH_BERLIN_BG2=y
@@ -55,6 +56,7 @@ CONFIG_ARCH_VEXPRESS_CA9X4=y
 CONFIG_ARCH_VIRT=y
 CONFIG_ARCH_WM8850=y
 CONFIG_ARCH_ZYNQ=y
+CONFIG_NEON=y
 CONFIG_TRUSTED_FOUNDATIONS=y
 CONFIG_PCI=y
 CONFIG_PCI_MSI=y

arch/arm/configs/mvebu_defconfig

@@ -11,6 +11,7 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_ARCH_MVEBU=y
 CONFIG_MACH_ARMADA_370=y
 CONFIG_MACH_ARMADA_XP=y
+CONFIG_NEON=y
 # CONFIG_CACHE_L2X0 is not set
 # CONFIG_SWP_EMULATE is not set
 CONFIG_PCI=y

arch/arm/configs/omap2plus_defconfig

@@ -28,6 +28,7 @@ CONFIG_ARCH_OMAP3=y
 CONFIG_ARCH_OMAP4=y
 CONFIG_SOC_OMAP5=y
 CONFIG_SOC_AM33XX=y
+CONFIG_SOC_AM43XX=y
 CONFIG_SOC_DRA7XX=y
 CONFIG_ARM_THUMBEE=y
 CONFIG_ARM_ERRATA_411920=y

arch/arm/firmware/Kconfig

@@ -11,6 +11,7 @@ menu "Firmware options"
 config TRUSTED_FOUNDATIONS
 	bool "Trusted Foundations secure monitor support"
 	depends on ARCH_SUPPORTS_TRUSTED_FOUNDATIONS
+	default y
 	help
 	  Some devices (including most Tegra-based consumer devices on the
 	  market) are booted with the Trusted Foundations secure monitor
@@ -20,7 +21,7 @@ config TRUSTED_FOUNDATIONS
 	  This option allows the kernel to invoke the secure monitor whenever
 	  required on devices using Trusted Foundations. See
 	  arch/arm/include/asm/trusted_foundations.h or the
-	  tl,trusted-foundations device tree binding documentation for details
+	  tlm,trusted-foundations device tree binding documentation for details
 	  on how to use it.
 
 	  Say n if you don't know what this is about.

arch/arm/firmware/trusted_foundations.c

@@ -22,6 +22,15 @@
 
 #define TF_SET_CPU_BOOT_ADDR_SMC 0xfffff200
 
+#define TF_CPU_PM		0xfffffffc
+#define TF_CPU_PM_S3		0xffffffe3
+#define TF_CPU_PM_S2		0xffffffe6
+#define TF_CPU_PM_S2_NO_MC_CLK	0xffffffe5
+#define TF_CPU_PM_S1		0xffffffe4
+#define TF_CPU_PM_S1_NOFLUSH_L2	0xffffffe7
+
+static unsigned long cpu_boot_addr;
+
 static void __naked tf_generic_smc(u32 type, u32 arg1, u32 arg2)
 {
 	asm volatile(
@@ -41,13 +50,22 @@ static void __naked tf_generic_smc(u32 type, u32 arg1, u32 arg2)
 
 static int tf_set_cpu_boot_addr(int cpu, unsigned long boot_addr)
 {
-	tf_generic_smc(TF_SET_CPU_BOOT_ADDR_SMC, boot_addr, 0);
+	cpu_boot_addr = boot_addr;
+	tf_generic_smc(TF_SET_CPU_BOOT_ADDR_SMC, cpu_boot_addr, 0);
+
+	return 0;
+}
+
+static int tf_prepare_idle(void)
+{
+	tf_generic_smc(TF_CPU_PM, TF_CPU_PM_S1_NOFLUSH_L2, cpu_boot_addr);
 
 	return 0;
 }
 
 static const struct firmware_ops trusted_foundations_ops = {
 	.set_cpu_boot_addr = tf_set_cpu_boot_addr,
+	.prepare_idle = tf_prepare_idle,
 };
 
 void register_trusted_foundations(struct trusted_foundations_platform_data *pd)

arch/arm/include/asm/firmware.h

@@ -21,6 +21,10 @@
  * A filled up structure can be registered with register_firmware_ops().
  */
 struct firmware_ops {
+	/*
+	 * Inform the firmware we intend to enter CPU idle mode
+	 */
+	int (*prepare_idle)(void);
 	/*
 	 * Enters CPU idle mode
 	 */

arch/arm/plat-orion/include/plat/cache-feroceon-l2.h → arch/arm/include/asm/hardware/cache-feroceon-l2.h

 /*
- * arch/arm/plat-orion/include/plat/cache-feroceon-l2.h
+ * arch/arm/include/asm/hardware/cache-feroceon-l2.h
  *
  * Copyright (C) 2008 Marvell Semiconductor
  *
@@ -9,3 +9,5 @@
  */
 
 extern void __init feroceon_l2_init(int l2_wt_override);
+extern int __init feroceon_of_init(void);
+

arch/arm/include/asm/smp.h

@@ -115,6 +115,15 @@ struct smp_operations {
 #endif
 };
 
+struct of_cpu_method {
+	const char *method;
+	struct smp_operations *ops;
+};
+
+#define CPU_METHOD_OF_DECLARE(name, _method, _ops)			\
+	static const struct of_cpu_method __cpu_method_of_table_##name	\
+		__used __section(__cpu_method_of_table)			\
+		= { .method = _method, .ops = _ops }
 /*
  * set platform specific SMP operations
  */

arch/arm/include/asm/trusted_foundations.h

@@ -30,6 +30,8 @@
 #include <linux/printk.h>
 #include <linux/bug.h>
 #include <linux/of.h>
+#include <linux/cpu.h>
+#include <linux/smp.h>
 
 struct trusted_foundations_platform_data {
 	unsigned int version_major;
@@ -47,10 +49,13 @@ static inline void register_trusted_foundations(
 				   struct trusted_foundations_platform_data *pd)
 {
 	/*
-	 * If we try to register TF, this means the system needs it to continue.
-	 * Its absence if thus a fatal error.
+	 * If the system requires TF and we cannot provide it, continue booting
+	 * but disable features that cannot be provided.
 	 */
-	panic("No support for Trusted Foundations, stopping...\n");
+	pr_err("No support for Trusted Foundations, continuing in degraded mode.\n");
+	pr_err("Secondary processors as well as CPU PM will be disabled.\n");
+	setup_max_cpus = 0;
+	cpu_idle_poll_ctrl(true);
 }
 
 static inline void of_register_trusted_foundations(void)
@@ -59,7 +64,7 @@ static inline void of_register_trusted_foundations(void)
 	 * If we find the target should enable TF but does not support it,
 	 * fail as the system won't be able to do much anyway
 	 */
-	if (of_find_compatible_node(NULL, NULL, "tl,trusted-foundations"))
+	if (of_find_compatible_node(NULL, NULL, "tlm,trusted-foundations"))
 		register_trusted_foundations(NULL);
 }
 #endif /* CONFIG_TRUSTED_FOUNDATIONS */

arch/arm/kernel/devtree.c

@@ -18,6 +18,7 @@
 #include <linux/of_fdt.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
+#include <linux/smp.h>
 
 #include <asm/cputype.h>
 #include <asm/setup.h>
@@ -63,6 +64,34 @@ void __init arm_dt_memblock_reserve(void)
 	}
 }
 
+#ifdef CONFIG_SMP
+extern struct of_cpu_method __cpu_method_of_table_begin[];
+extern struct of_cpu_method __cpu_method_of_table_end[];
+
+static int __init set_smp_ops_by_method(struct device_node *node)
+{
+	const char *method;
+	struct of_cpu_method *m = __cpu_method_of_table_begin;
+
+	if (of_property_read_string(node, "enable-method", &method))
+		return 0;
+
+	for (; m < __cpu_method_of_table_end; m++)
+		if (!strcmp(m->method, method)) {
+			smp_set_ops(m->ops);
+			return 1;
+		}
+
+	return 0;
+}
+#else
+static inline int set_smp_ops_by_method(struct device_node *node)
+{
+	return 1;
+}
+#endif
+
+
 /*
  * arm_dt_init_cpu_maps - Function retrieves cpu nodes from the device tree
  * and builds the cpu logical map array containing MPIDR values related to
@@ -79,6 +108,7 @@ void __init arm_dt_init_cpu_maps(void)
 	 * read as 0.
 	 */
 	struct device_node *cpu, *cpus;
+	int found_method = 0;
 	u32 i, j, cpuidx = 1;
 	u32 mpidr = is_smp() ? read_cpuid_mpidr() & MPIDR_HWID_BITMASK : 0;
 
@@ -150,8 +180,18 @@ void __init arm_dt_init_cpu_maps(void)
 		}
 
 		tmp_map[i] = hwid;
+
+		if (!found_method)
+			found_method = set_smp_ops_by_method(cpu);
 	}
 
+	/*
+	 * Fallback to an enable-method in the cpus node if nothing found in
+	 * a cpu node.
+	 */
+	if (!found_method)
+		set_smp_ops_by_method(cpus);
+
 	if (!bootcpu_valid) {
 		pr_warn("DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map\n");
 		return;

arch/arm/mach-bcm/Kconfig

@@ -43,6 +43,32 @@ config ARCH_BCM2835
 	  This enables support for the Broadcom BCM2835 SoC. This SoC is
 	  used in the Raspberry Pi and Roku 2 devices.
 
+config ARCH_BCM_5301X
+	bool "Broadcom BCM470X / BCM5301X ARM SoC" if ARCH_MULTI_V7
+	depends on MMU
+	select ARM_GIC
+	select CACHE_L2X0
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if SMP
+	select HAVE_SMP
+	select COMMON_CLK
+	select GENERIC_CLOCKEVENTS
+	select ARM_GLOBAL_TIMER
+	select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
+	select MIGHT_HAVE_PCI
+	help
+	  Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores.
+
+	  This is a network SoC line mostly used in home routers and
+	  wifi access points, it's internal name is Northstar.
+	  This inclused the following SoC: BCM53010, BCM53011, BCM53012,
+	  BCM53014, BCM53015, BCM53016, BCM53017, BCM53018, BCM4707,
+	  BCM4708 and BCM4709.
+
+	  Do not confuse this with the BCM4760 which is a totally
+	  different SoC or with the older BCM47XX and BCM53XX based
+	  network SoC using a MIPS CPU, they are supported by arch/mips/bcm47xx
+
 endmenu
 
 endif

arch/arm/mach-bcm/Makefile

 #
-# Copyright (C) 2012-2013 Broadcom Corporation
+# Copyright (C) 2012-2014 Broadcom Corporation
 #
 # This program is free software; you can redistribute it and/or
 # modify it under the terms of the GNU General Public License as
@@ -10,8 +10,10 @@
 # of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-obj-$(CONFIG_ARCH_BCM_MOBILE)	:= board_bcm281xx.o bcm_kona_smc.o bcm_kona_smc_asm.o kona.o
+obj-$(CONFIG_ARCH_BCM_MOBILE)	:= board_bcm281xx.o board_bcm21664.o \
+				bcm_kona_smc.o bcm_kona_smc_asm.o kona.o
 obj-$(CONFIG_ARCH_BCM2835)	+= board_bcm2835.o
 
 plus_sec := $(call as-instr,.arch_extension sec,+sec)
 AFLAGS_bcm_kona_smc_asm.o	:=-Wa,-march=armv7-a$(plus_sec)
+obj-$(CONFIG_ARCH_BCM_5301X)	+= bcm_5301x.o

arch/arm/mach-bcm/bcm_5301x.c

+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ *
+ * Copyright 2013 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+#include <linux/of_platform.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include <asm/mach/arch.h>
+#include <asm/siginfo.h>
+#include <asm/signal.h>
+
+
+static bool first_fault = true;
+
+static int bcm5301x_abort_handler(unsigned long addr, unsigned int fsr,
+				 struct pt_regs *regs)
+{
+	if (fsr == 0x1c06 && first_fault) {
+		first_fault = false;
+
+		/*
+		 * These faults with code 0x1c06 happens for no good reason,
+		 * possibly left over from the CFE boot loader.
+		 */
+		pr_warn("External imprecise Data abort at addr=%#lx, fsr=%#x ignored.\n",
+		addr, fsr);
+
+		/* Returning non-zero causes fault display and panic */
+		return 0;
+	}
+
+	/* Others should cause a fault */
+	return 1;
+}
+
+static void __init bcm5301x_init_early(void)
+{
+	/* Install our hook */
+	hook_fault_code(16 + 6, bcm5301x_abort_handler, SIGBUS, BUS_OBJERR,
+			"imprecise external abort");
+}
+
+static void __init bcm5301x_dt_init(void)
+{
+	l2x0_of_init(0, ~0UL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char __initconst *bcm5301x_dt_compat[] = {
+	"brcm,bcm4708",
+	NULL,
+};
+
+DT_MACHINE_START(BCM5301X, "BCM5301X")
+	.init_early	= bcm5301x_init_early,
+	.init_machine	= bcm5301x_dt_init,
+	.dt_compat	= bcm5301x_dt_compat,
+MACHINE_END

arch/arm/mach-bcm/board_bcm21664.c

+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clocksource.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+
+#include "bcm_kona_smc.h"
+#include "kona.h"
+
+#define RSTMGR_DT_STRING		"brcm,bcm21664-resetmgr"
+
+#define RSTMGR_REG_WR_ACCESS_OFFSET	0
+#define RSTMGR_REG_CHIP_SOFT_RST_OFFSET	4
+
+#define RSTMGR_WR_PASSWORD		0xa5a5
+#define RSTMGR_WR_PASSWORD_SHIFT	8
+#define RSTMGR_WR_ACCESS_ENABLE		1
+
+static void bcm21664_restart(enum reboot_mode mode, const char *cmd)
+{
+	void __iomem *base;
+	struct device_node *resetmgr;
+
+	resetmgr = of_find_compatible_node(NULL, NULL, RSTMGR_DT_STRING);
+	if (!resetmgr) {
+		pr_emerg("Couldn't find " RSTMGR_DT_STRING "\n");
+		return;
+	}
+	base = of_iomap(resetmgr, 0);
+	if (!base) {
+		pr_emerg("Couldn't map " RSTMGR_DT_STRING "\n");
+		return;
+	}
+
+	/*
+	 * A soft reset is triggered by writing a 0 to bit 0 of the soft reset
+	 * register. To write to that register we must first write the password
+	 * and the enable bit in the write access enable register.
+	 */
+	writel((RSTMGR_WR_PASSWORD << RSTMGR_WR_PASSWORD_SHIFT) |
+		RSTMGR_WR_ACCESS_ENABLE,
+		base + RSTMGR_REG_WR_ACCESS_OFFSET);
+	writel(0, base + RSTMGR_REG_CHIP_SOFT_RST_OFFSET);
+
+	/* Wait for reset */
+	while (1);
+}
+
+static void __init bcm21664_init(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table, NULL,
+		&platform_bus);
+	kona_l2_cache_init();
+}
+
+static const char * const bcm21664_dt_compat[] = {
+	"brcm,bcm21664",
+	NULL,
+};
+
+DT_MACHINE_START(BCM21664_DT, "BCM21664 Broadcom Application Processor")
+	.init_machine = bcm21664_init,
+	.restart = bcm21664_restart,
+	.dt_compat = bcm21664_dt_compat,
+MACHINE_END

arch/arm/mach-clps711x/board-autcpu12.c

@@ -265,14 +265,12 @@ static void __init autcpu12_init_late(void)
 MACHINE_START(AUTCPU12, "autronix autcpu12")
 	/* Maintainer: Thomas Gleixner */
 	.atag_offset	= 0x20000,
-	.nr_irqs	= CLPS711X_NR_IRQS,
 	.map_io		= clps711x_map_io,
 	.init_early	= clps711x_init_early,
 	.init_irq	= clps711x_init_irq,
 	.init_time	= clps711x_timer_init,
 	.init_machine	= autcpu12_init,
 	.init_late	= autcpu12_init_late,
-	.handle_irq	= clps711x_handle_irq,
 	.restart	= clps711x_restart,
 MACHINE_END
 

arch/arm/mach-clps711x/board-cdb89712.c

@@ -139,12 +139,10 @@ static void __init cdb89712_init(void)
 MACHINE_START(CDB89712, "Cirrus-CDB89712")
 	/* Maintainer: Ray Lehtiniemi */
 	.atag_offset	= 0x100,
-	.nr_irqs	= CLPS711X_NR_IRQS,
 	.map_io		= clps711x_map_io,
 	.init_early	= clps711x_init_early,
 	.init_irq	= clps711x_init_irq,
 	.init_time	= clps711x_timer_init,
 	.init_machine	= cdb89712_init,
-	.handle_irq	= clps711x_handle_irq,
 	.restart	= clps711x_restart,
 MACHINE_END

arch/arm/mach-clps711x/board-clep7312.c

@@ -36,12 +36,10 @@ fixup_clep7312(struct tag *tags, char **cmdline, struct meminfo *mi)
 MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312")
 	/* Maintainer: Nobody */
 	.atag_offset	= 0x0100,
-	.nr_irqs	= CLPS711X_NR_IRQS,
 	.fixup		= fixup_clep7312,
 	.map_io		= clps711x_map_io,
 	.init_early	= clps711x_init_early,
 	.init_irq	= clps711x_init_irq,
 	.init_time	= clps711x_timer_init,
-	.handle_irq	= clps711x_handle_irq,
 	.restart	= clps711x_restart,
 MACHINE_END

arch/arm/mach-clps711x/board-edb7211.c

@@ -177,7 +177,6 @@ static void __init edb7211_init_late(void)
 MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
 	/* Maintainer: Jon McClintock */
 	.atag_offset	= VIDEORAM_SIZE + 0x100,
-	.nr_irqs	= CLPS711X_NR_IRQS,
 	.fixup		= fixup_edb7211,
 	.reserve	= edb7211_reserve,
 	.map_io		= clps711x_map_io,
@@ -186,6 +185,5 @@ MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
 	.init_time	= clps711x_timer_init,
 	.init_machine	= edb7211_init,
 	.init_late	= edb7211_init_late,
-	.handle_irq	= clps711x_handle_irq,
 	.restart	= clps711x_restart,
 MACHINE_END

arch/arm/mach-clps711x/board-p720t.c

@@ -363,7 +363,6 @@ static void __init p720t_init_late(void)
 MACHINE_START(P720T, "ARM-Prospector720T")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
 	.atag_offset	= 0x100,
-	.nr_irqs	= CLPS711X_NR_IRQS,
 	.fixup		= fixup_p720t,
 	.map_io		= clps711x_map_io,
 	.init_early	= clps711x_init_early,
@@ -371,6 +370,5 @@ MACHINE_START(P720T, "ARM-Prospector720T")
 	.init_time	= clps711x_timer_init,
 	.init_machine	= p720t_init,
 	.init_late	= p720t_init_late,
-	.handle_irq	= clps711x_handle_irq,
 	.restart	= clps711x_restart,
 MACHINE_END

arch/arm/mach-clps711x/common.c

@@ -31,14 +31,14 @@
 #include <linux/clk-provider.h>
 #include <linux/sched_clock.h>
 
-#include <asm/exception.h>
-#include <asm/mach/irq.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include <asm/system_misc.h>
 
 #include <mach/hardware.h>
 
+#include "common.h"
+
 static struct clk *clk_pll, *clk_bus, *clk_uart, *clk_timerl, *clk_timerh,
 		  *clk_tint, *clk_spi;
 
@@ -59,204 +59,9 @@ void __init clps711x_map_io(void)
 	iotable_init(clps711x_io_desc, ARRAY_SIZE(clps711x_io_desc));
 }
 
-static void int1_mask(struct irq_data *d)
-{
-	u32 intmr1;
-
-	intmr1 = clps_readl(INTMR1);
-	intmr1 &= ~(1 << d->irq);
-	clps_writel(intmr1, INTMR1);
-}
-
-static void int1_eoi(struct irq_data *d)
-{
-	switch (d->irq) {
-	case IRQ_CSINT:  clps_writel(0, COEOI);  break;
-	case IRQ_TC1OI:  clps_writel(0, TC1EOI); break;
-	case IRQ_TC2OI:  clps_writel(0, TC2EOI); break;
-	case IRQ_RTCMI:  clps_writel(0, RTCEOI); break;
-	case IRQ_TINT:   clps_writel(0, TEOI);   break;
-	case IRQ_UMSINT: clps_writel(0, UMSEOI); break;
-	}
-}
-
-static void int1_unmask(struct irq_data *d)
-{
-	u32 intmr1;
-
-	intmr1 = clps_readl(INTMR1);
-	intmr1 |= 1 << d->irq;
-	clps_writel(intmr1, INTMR1);
-}
-
-static struct irq_chip int1_chip = {
-	.name		= "Interrupt Vector 1",
-	.irq_eoi	= int1_eoi,
-	.irq_mask	= int1_mask,
-	.irq_unmask	= int1_unmask,
-};
-
-static void int2_mask(struct irq_data *d)
-{
-	u32 intmr2;
-
-	intmr2 = clps_readl(INTMR2);
-	intmr2 &= ~(1 << (d->irq - 16));
-	clps_writel(intmr2, INTMR2);
-}
-
-static void int2_eoi(struct irq_data *d)
-{
-	switch (d->irq) {
-	case IRQ_KBDINT: clps_writel(0, KBDEOI); break;
-	}
-}
-
-static void int2_unmask(struct irq_data *d)
-{
-	u32 intmr2;
-
-	intmr2 = clps_readl(INTMR2);
-	intmr2 |= 1 << (d->irq - 16);
-	clps_writel(intmr2, INTMR2);
-}
-
-static struct irq_chip int2_chip = {
-	.name		= "Interrupt Vector 2",
-	.irq_eoi	= int2_eoi,
-	.irq_mask	= int2_mask,
-	.irq_unmask	= int2_unmask,
-};
-
-static void int3_mask(struct irq_data *d)
-{
-	u32 intmr3;
-
-	intmr3 = clps_readl(INTMR3);
-	intmr3 &= ~(1 << (d->irq - 32));
-	clps_writel(intmr3, INTMR3);
-}
-
-static void int3_unmask(struct irq_data *d)
-{
-	u32 intmr3;
-
-	intmr3 = clps_readl(INTMR3);
-	intmr3 |= 1 << (d->irq - 32);
-	clps_writel(intmr3, INTMR3);
-}
-
-static struct irq_chip int3_chip = {
-	.name		= "Interrupt Vector 3",
-	.irq_mask	= int3_mask,
-	.irq_unmask	= int3_unmask,
-};
-
-static struct {
-	int			nr;
-	struct irq_chip		*chip;
-	irq_flow_handler_t	handle;
-} clps711x_irqdescs[] __initdata = {
-	{ IRQ_CSINT,	&int1_chip,	handle_fasteoi_irq,	},
-	{ IRQ_EINT1,	&int1_chip,	handle_level_irq,	},
-	{ IRQ_EINT2,	&int1_chip,	handle_level_irq,	},
-	{ IRQ_EINT3,	&int1_chip,	handle_level_irq,	},
-	{ IRQ_TC1OI,	&int1_chip,	handle_fasteoi_irq,	},
-	{ IRQ_TC2OI,	&int1_chip,	handle_fasteoi_irq,	},
-	{ IRQ_RTCMI,	&int1_chip,	handle_fasteoi_irq,	},
-	{ IRQ_TINT,	&int1_chip,	handle_fasteoi_irq,	},
-	{ IRQ_UTXINT1,	&int1_chip,	handle_level_irq,	},
-	{ IRQ_URXINT1,	&int1_chip,	handle_level_irq,	},
-	{ IRQ_UMSINT,	&int1_chip,	handle_fasteoi_irq,	},
-	{ IRQ_SSEOTI,	&int1_chip,	handle_level_irq,	},
-	{ IRQ_KBDINT,	&int2_chip,	handle_fasteoi_irq,	},
-	{ IRQ_SS2RX,	&int2_chip,	handle_level_irq,	},
-	{ IRQ_SS2TX,	&int2_chip,	handle_level_irq,	},
-	{ IRQ_UTXINT2,	&int2_chip,	handle_level_irq,	},
-	{ IRQ_URXINT2,	&int2_chip,	handle_level_irq,	},
-};
-
 void __init clps711x_init_irq(void)
 {
-	unsigned int i;
-
-	/* Disable interrupts */
-	clps_writel(0, INTMR1);
-	clps_writel(0, INTMR2);
-	clps_writel(0, INTMR3);
-
-	/* Clear down any pending interrupts */
-	clps_writel(0, BLEOI);
-	clps_writel(0, MCEOI);
-	clps_writel(0, COEOI);
-	clps_writel(0, TC1EOI);
-	clps_writel(0, TC2EOI);
-	clps_writel(0, RTCEOI);
-	clps_writel(0, TEOI);
-	clps_writel(0, UMSEOI);
-	clps_writel(0, KBDEOI);
-	clps_writel(0, SRXEOF);
-	clps_writel(0xffffffff, DAISR);
-
-	for (i = 0; i < ARRAY_SIZE(clps711x_irqdescs); i++) {
-		irq_set_chip_and_handler(clps711x_irqdescs[i].nr,
-					 clps711x_irqdescs[i].chip,
-					 clps711x_irqdescs[i].handle);
-		set_irq_flags(clps711x_irqdescs[i].nr,
-			      IRQF_VALID | IRQF_PROBE);
-	}
-
-	if (IS_ENABLED(CONFIG_FIQ)) {
-		init_FIQ(0);
-		irq_set_chip_and_handler(IRQ_DAIINT, &int3_chip,
-					 handle_bad_irq);
-		set_irq_flags(IRQ_DAIINT,
-			      IRQF_VALID | IRQF_PROBE | IRQF_NOAUTOEN);
-	}
-}
-
-static inline u32 fls16(u32 x)
-{
-	u32 r = 15;
-
-	if (!(x & 0xff00)) {
-		x <<= 8;
-		r -= 8;
-	}
-	if (!(x & 0xf000)) {
-		x <<= 4;
-		r -= 4;
-	}
-	if (!(x & 0xc000)) {
-		x <<= 2;
-		r -= 2;
-	}
-	if (!(x & 0x8000))
-		r--;
-
-	return r;
-}
-
-asmlinkage void __exception_irq_entry clps711x_handle_irq(struct pt_regs *regs)
-{
-	do {
-		u32 irqstat;
-		void __iomem *base = CLPS711X_VIRT_BASE;
-
-		irqstat = readw_relaxed(base + INTSR1) &
-			  readw_relaxed(base + INTMR1);
-		if (irqstat)
-			handle_IRQ(fls16(irqstat), regs);
-
-		irqstat = readw_relaxed(base + INTSR2) &
-			  readw_relaxed(base + INTMR2);
-		if (irqstat) {
-			handle_IRQ(fls16(irqstat) + 16, regs);
-			continue;
-		}
-
-		break;
-	} while (1);
+	clps711x_intc_init(CLPS711X_PHYS_BASE, SZ_16K);
 }
 
 static u64 notrace clps711x_sched_clock_read(void)

arch/arm/mach-clps711x/common.h

@@ -6,13 +6,14 @@
 
 #include <linux/reboot.h>
 
-#define CLPS711X_NR_IRQS	(33)
 #define CLPS711X_NR_GPIO	(4 * 8 + 3)
 #define CLPS711X_GPIO(prt, bit)	((prt) * 8 + (bit))
 
 extern void clps711x_map_io(void);
 extern void clps711x_init_irq(void);
 extern void clps711x_timer_init(void);
-extern void clps711x_handle_irq(struct pt_regs *regs);
 extern void clps711x_restart(enum reboot_mode mode, const char *cmd);
 extern void clps711x_init_early(void);
+
+/* drivers/irqchip/irq-clps711x.c */
+void clps711x_intc_init(phys_addr_t, resource_size_t);

arch/arm/mach-clps711x/include/mach/clps711x.h

@@ -40,8 +40,6 @@
 #define MEMCFG1		(0x0180)
 #define MEMCFG2		(0x01c0)
 #define DRFPR		(0x0200)
-#define INTSR1		(0x0240)
-#define INTMR1		(0x0280)
 #define LCDCON		(0x02c0)
 #define TC1D		(0x0300)
 #define TC2D		(0x0340)
@@ -55,28 +53,16 @@
 #define PALLSW		(0x0540)
 #define PALMSW		(0x0580)
 #define STFCLR		(0x05c0)
-#define BLEOI		(0x0600)
-#define MCEOI		(0x0640)
-#define TEOI		(0x0680)
-#define TC1EOI		(0x06c0)
-#define TC2EOI		(0x0700)
-#define RTCEOI		(0x0740)
-#define UMSEOI		(0x0780)
-#define COEOI		(0x07c0)
 #define HALT		(0x0800)
 #define STDBY		(0x0840)
 
 #define FBADDR		(0x1000)
 #define SYSCON2		(0x1100)
 #define SYSFLG2		(0x1140)
-#define INTSR2		(0x1240)
-#define INTMR2		(0x1280)
 #define UARTDR2		(0x1480)
 #define UBRLCR2		(0x14c0)
 #define SS2DR		(0x1500)
-#define SRXEOF		(0x1600)
 #define SS2POP		(0x16c0)
-#define KBDEOI		(0x1700)
 
 #define DAIR		(0x2000)
 #define DAIDR0		(0x2040)
@@ -84,8 +70,6 @@
 #define DAIDR2		(0x20c0)
 #define DAISR		(0x2100)
 #define SYSCON3		(0x2200)
-#define INTSR3		(0x2240)
-#define INTMR3		(0x2280)
 #define LEDFLSH		(0x22c0)
 #define SDCONF		(0x2300)
 #define SDRFPR		(0x2340)

arch/arm/mach-davinci/Kconfig

@@ -51,11 +51,6 @@ config ARCH_DAVINCI_DM365
 	select AINTC
 	select ARCH_DAVINCI_DMx
 
-config ARCH_DAVINCI_TNETV107X
-	bool "TNETV107X based system"
-	select CPU_V6
-	select CP_INTC
-
 comment "DaVinci Board Type"
 
 config MACH_DA8XX_DT
@@ -215,13 +210,6 @@ config DA850_WL12XX
 	  AM18x EVM.
 
 
-config MACH_TNETV107X
-	bool "TI TNETV107X Reference Platform"
-	default ARCH_DAVINCI_TNETV107X
-	depends on ARCH_DAVINCI_TNETV107X
-	help
-	  Say Y here to select the TI TNETV107X Evaluation Module.
-
 config MACH_MITYOMAPL138
 	bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
 	depends on ARCH_DAVINCI_DA850

arch/arm/mach-davinci/Makefile

@@ -16,7 +16,6 @@ obj-$(CONFIG_ARCH_DAVINCI_DM646x)       += dm646x.o devices.o
 obj-$(CONFIG_ARCH_DAVINCI_DM365)	+= dm365.o devices.o
 obj-$(CONFIG_ARCH_DAVINCI_DA830)        += da830.o devices-da8xx.o
 obj-$(CONFIG_ARCH_DAVINCI_DA850)        += da850.o devices-da8xx.o
-obj-$(CONFIG_ARCH_DAVINCI_TNETV107X)    += tnetv107x.o devices-tnetv107x.o
 
 obj-$(CONFIG_AINTC)			+= irq.o
 obj-$(CONFIG_CP_INTC)			+= cp_intc.o
@@ -32,7 +31,6 @@ obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM)	+= board-dm646x-evm.o cdce949.o
 obj-$(CONFIG_MACH_DAVINCI_DM365_EVM)	+= board-dm365-evm.o
 obj-$(CONFIG_MACH_DAVINCI_DA830_EVM)	+= board-da830-evm.o
 obj-$(CONFIG_MACH_DAVINCI_DA850_EVM)	+= board-da850-evm.o
-obj-$(CONFIG_MACH_TNETV107X)		+= board-tnetv107x-evm.o
 obj-$(CONFIG_MACH_MITYOMAPL138)		+= board-mityomapl138.o
 obj-$(CONFIG_MACH_OMAPL138_HAWKBOARD)	+= board-omapl138-hawk.o
 

arch/arm/mach-davinci/Makefile.boot

-ifeq ($(CONFIG_ARCH_DAVINCI_DA8XX),y)
-ifeq ($(CONFIG_ARCH_DAVINCI_DMx),y)
-$(error Cannot enable DaVinci and DA8XX platforms concurrently)
-else
-   zreladdr-y	+= 0xc0008000
-params_phys-y	:= 0xc0000100
-initrd_phys-y	:= 0xc0800000
-endif
-else
-   zreladdr-y	+= 0x80008000
-params_phys-y	:= 0x80000100
-initrd_phys-y	:= 0x80800000
-endif
+zreladdr-$(CONFIG_ARCH_DAVINCI_DA8XX)		+= 0xc0008000
+params_phys-$(CONFIG_ARCH_DAVINCI_DA8XX)	:= 0xc0000100
+initrd_phys-$(CONFIG_ARCH_DAVINCI_DA8XX)	:= 0xc0800000
+
+zreladdr-$(CONFIG_ARCH_DAVINCI_DMx)		+= 0x80008000
+params_phys-$(CONFIG_ARCH_DAVINCI_DMx)		:= 0x80000100
+initrd_phys-$(CONFIG_ARCH_DAVINCI_DMx)		:= 0x80800000

arch/arm/mach-davinci/board-tnetv107x-evm.c

-/*
- * Texas Instruments TNETV107X EVM Board Support
- *
- * Copyright (C) 2010 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/dma-mapping.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/ratelimit.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/spi/spi.h>
-#include <linux/platform_data/edma.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/irqs.h>
-#include <mach/mux.h>
-#include <mach/cp_intc.h>
-#include <mach/tnetv107x.h>
-
-#define EVM_MMC_WP_GPIO		21
-#define EVM_MMC_CD_GPIO		24
-#define EVM_SPI_CS_GPIO		54
-
-static int initialize_gpio(int gpio, char *desc)
-{
-	int ret;
-
-	ret = gpio_request(gpio, desc);
-	if (ret < 0) {
-		pr_err_ratelimited("cannot open %s gpio\n", desc);
-		return -ENOSYS;
-	}
-	gpio_direction_input(gpio);
-	return gpio;
-}
-
-static int mmc_get_cd(int index)
-{
-	static int gpio;
-
-	if (!gpio)
-		gpio = initialize_gpio(EVM_MMC_CD_GPIO, "mmc card detect");
-
-	if (gpio < 0)
-		return gpio;
-
-	return gpio_get_value(gpio) ? 0 : 1;
-}
-
-static int mmc_get_ro(int index)
-{
-	static int gpio;
-
-	if (!gpio)
-		gpio = initialize_gpio(EVM_MMC_WP_GPIO, "mmc write protect");
-
-	if (gpio < 0)
-		return gpio;
-
-	return gpio_get_value(gpio) ? 1 : 0;
-}
-
-static struct davinci_mmc_config mmc_config = {
-	.get_cd		= mmc_get_cd,
-	.get_ro		= mmc_get_ro,
-	.wires		= 4,
-	.max_freq	= 50000000,
-	.caps		= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-};
-
-static const short sdio1_pins[] __initconst = {
-	TNETV107X_SDIO1_CLK_1,		TNETV107X_SDIO1_CMD_1,
-	TNETV107X_SDIO1_DATA0_1,	TNETV107X_SDIO1_DATA1_1,
-	TNETV107X_SDIO1_DATA2_1,	TNETV107X_SDIO1_DATA3_1,
-	TNETV107X_GPIO21,		TNETV107X_GPIO24,
-	-1
-};
-
-static const short uart1_pins[] __initconst = {
-	TNETV107X_UART1_RD,		TNETV107X_UART1_TD,
-	-1
-};
-
-static const short ssp_pins[] __initconst = {
-	TNETV107X_SSP0_0, TNETV107X_SSP0_1, TNETV107X_SSP0_2,
-	TNETV107X_SSP1_0, TNETV107X_SSP1_1, TNETV107X_SSP1_2,
-	TNETV107X_SSP1_3, -1
-};
-
-static struct mtd_partition nand_partitions[] = {
-	/* bootloader (U-Boot, etc) in first 12 sectors */
-	{
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= (12*SZ_128K),
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	/* bootloader params in the next sector */
-	{
-		.name		= "params",
-		.offset		= MTDPART_OFS_NXTBLK,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	/* kernel */
-	{
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_NXTBLK,
-		.size		= SZ_4M,
-		.mask_flags	= 0,
-	},
-	/* file system */
-	{
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_NXTBLK,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	}
-};
-
-static struct davinci_nand_pdata nand_config = {
-	.mask_cle	= 0x4000,
-	.mask_ale	= 0x2000,
-	.parts		= nand_partitions,
-	.nr_parts	= ARRAY_SIZE(nand_partitions),
-	.ecc_mode	= NAND_ECC_HW,
-	.bbt_options	= NAND_BBT_USE_FLASH,
-	.ecc_bits	= 1,
-};
-
-static struct davinci_uart_config serial_config __initconst = {
-	.enabled_uarts	= BIT(1),
-};
-
-static const uint32_t keymap[] = {
-	KEY(0, 0, KEY_NUMERIC_1),
-	KEY(0, 1, KEY_NUMERIC_2),
-	KEY(0, 2, KEY_NUMERIC_3),
-	KEY(0, 3, KEY_FN_F1),
-	KEY(0, 4, KEY_MENU),
-
-	KEY(1, 0, KEY_NUMERIC_4),
-	KEY(1, 1, KEY_NUMERIC_5),
-	KEY(1, 2, KEY_NUMERIC_6),
-	KEY(1, 3, KEY_UP),
-	KEY(1, 4, KEY_FN_F2),
-
-	KEY(2, 0, KEY_NUMERIC_7),
-	KEY(2, 1, KEY_NUMERIC_8),
-	KEY(2, 2, KEY_NUMERIC_9),
-	KEY(2, 3, KEY_LEFT),
-	KEY(2, 4, KEY_ENTER),
-
-	KEY(3, 0, KEY_NUMERIC_STAR),
-	KEY(3, 1, KEY_NUMERIC_0),
-	KEY(3, 2, KEY_NUMERIC_POUND),
-	KEY(3, 3, KEY_DOWN),
-	KEY(3, 4, KEY_RIGHT),
-
-	KEY(4, 0, KEY_FN_F3),
-	KEY(4, 1, KEY_FN_F4),
-	KEY(4, 2, KEY_MUTE),
-	KEY(4, 3, KEY_HOME),
-	KEY(4, 4, KEY_BACK),
-
-	KEY(5, 0, KEY_VOLUMEDOWN),
-	KEY(5, 1, KEY_VOLUMEUP),
-	KEY(5, 2, KEY_F1),
-	KEY(5, 3, KEY_F2),
-	KEY(5, 4, KEY_F3),
-};
-
-static const struct matrix_keymap_data keymap_data = {
-	.keymap		= keymap,
-	.keymap_size	= ARRAY_SIZE(keymap),
-};
-
-static struct matrix_keypad_platform_data keypad_config = {
-	.keymap_data	= &keymap_data,
-	.num_row_gpios	= 6,
-	.num_col_gpios	= 5,
-	.debounce_ms	= 0, /* minimum */
-	.active_low	= 0, /* pull up realization */
-	.no_autorepeat	= 0,
-};
-
-static void spi_select_device(int cs)
-{
-	static int gpio;
-
-	if (!gpio) {
-		int ret;
-		ret = gpio_request(EVM_SPI_CS_GPIO, "spi chipsel");
-		if (ret < 0) {
-			pr_err("cannot open spi chipsel gpio\n");
-			gpio = -ENOSYS;
-			return;
-		} else {
-			gpio = EVM_SPI_CS_GPIO;
-			gpio_direction_output(gpio, 0);
-		}
-	}
-
-	if (gpio < 0)
-		return;
-
-	return gpio_set_value(gpio, cs ? 1 : 0);
-}
-
-static struct ti_ssp_spi_data spi_master_data = {
-	.num_cs	= 2,
-	.select	= spi_select_device,
-	.iosel	= SSP_PIN_SEL(0, SSP_CLOCK)	| SSP_PIN_SEL(1, SSP_DATA) |
-		  SSP_PIN_SEL(2, SSP_CHIPSEL)	| SSP_PIN_SEL(3, SSP_IN)   |
-		  SSP_INPUT_SEL(3),
-};
-
-static struct ti_ssp_data ssp_config = {
-	.out_clock	= 250 * 1000,
-	.dev_data	= {
-		[1] = {
-			.dev_name = "ti-ssp-spi",
-			.pdata = &spi_master_data,
-			.pdata_size = sizeof(spi_master_data),
-		},
-	},
-};
-
-static struct tnetv107x_device_info evm_device_info __initconst = {
-	.serial_config		= &serial_config,
-	.mmc_config[1]		= &mmc_config,	/* controller 1 */
-	.nand_config[0]		= &nand_config,	/* chip select 0 */
-	.keypad_config		= &keypad_config,
-	.ssp_config		= &ssp_config,
-};
-
-static struct spi_board_info spi_info[] __initconst = {
-};
-
-static __init void tnetv107x_evm_board_init(void)
-{
-	davinci_cfg_reg_list(sdio1_pins);
-	davinci_cfg_reg_list(uart1_pins);
-	davinci_cfg_reg_list(ssp_pins);
-
-	tnetv107x_devices_init(&evm_device_info);
-
-	spi_register_board_info(spi_info, ARRAY_SIZE(spi_info));
-}
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-static int __init tnetv107x_evm_console_init(void)
-{
-	return add_preferred_console("ttyS", 0, "115200");
-}
-console_initcall(tnetv107x_evm_console_init);
-#endif
-
-MACHINE_START(TNETV107X, "TNETV107X EVM")
-	.atag_offset	= 0x100,
-	.map_io		= tnetv107x_init,
-	.init_irq	= cp_intc_init,
-	.init_time	= davinci_timer_init,
-	.init_machine	= tnetv107x_evm_board_init,
-	.init_late	= davinci_init_late,
-	.dma_zone_size	= SZ_128M,
-	.restart	= tnetv107x_restart,
-MACHINE_END

arch/arm/mach-davinci/davinci.h

@@ -79,6 +79,8 @@ int davinci_gpio_register(struct resource *res, int size, void *pdata);
 #define DM646X_ASYNC_EMIF_CONTROL_BASE	0x20008000
 #define DM646X_ASYNC_EMIF_CS2_SPACE_BASE 0x42000000
 
+int davinci_init_wdt(void);
+
 /* DM355 function declarations */
 void dm355_init(void);
 void dm355_init_spi0(unsigned chipselect_mask,

arch/arm/mach-davinci/devices.c

@@ -313,9 +313,9 @@ void davinci_restart(enum reboot_mode mode, const char *cmd)
 	davinci_watchdog_reset(&davinci_wdt_device);
 }
 
-static void davinci_init_wdt(void)
+int davinci_init_wdt(void)
 {
-	platform_device_register(&davinci_wdt_device);
+	return platform_device_register(&davinci_wdt_device);
 }
 
 static struct platform_device davinci_gpio_device = {
@@ -348,16 +348,3 @@ struct davinci_timer_instance davinci_timer_instance[2] = {
 	},
 };
 
-/*-------------------------------------------------------------------------*/
-
-static int __init davinci_init_devices(void)
-{
-	/* please keep these calls, and their implementations above,
-	 * in alphabetical order so they're easier to sort through.
-	 */
-	davinci_init_wdt();
-
-	return 0;
-}
-arch_initcall(davinci_init_devices);
-

arch/arm/mach-davinci/dm355.c

@@ -1076,12 +1076,18 @@ int __init dm355_init_video(struct vpfe_config *vpfe_cfg,
 
 static int __init dm355_init_devices(void)
 {
+	int ret = 0;
+
 	if (!cpu_is_davinci_dm355())
 		return 0;
 
 	davinci_cfg_reg(DM355_INT_EDMA_CC);
 	platform_device_register(&dm355_edma_device);
 
-	return 0;
+	ret = davinci_init_wdt();
+	if (ret)
+		pr_warn("%s: watchdog init failed: %d\n", __func__, ret);
+
+	return ret;
 }
 postcore_initcall(dm355_init_devices);

arch/arm/mach-davinci/dm365.c

@@ -1436,6 +1436,8 @@ int __init dm365_init_video(struct vpfe_config *vpfe_cfg,
 
 static int __init dm365_init_devices(void)
 {
+	int ret = 0;
+
 	if (!cpu_is_davinci_dm365())
 		return 0;
 
@@ -1445,6 +1447,10 @@ static int __init dm365_init_devices(void)
 	platform_device_register(&dm365_mdio_device);
 	platform_device_register(&dm365_emac_device);
 
-	return 0;
+	ret = davinci_init_wdt();
+	if (ret)
+		pr_warn("%s: watchdog init failed: %d\n", __func__, ret);
+
+	return ret;
 }
 postcore_initcall(dm365_init_devices);

arch/arm/mach-davinci/dm644x.c

@@ -964,6 +964,8 @@ int __init dm644x_init_video(struct vpfe_config *vpfe_cfg,
 
 static int __init dm644x_init_devices(void)
 {
+	int ret = 0;
+
 	if (!cpu_is_davinci_dm644x())
 		return 0;
 
@@ -972,6 +974,10 @@ static int __init dm644x_init_devices(void)
 	platform_device_register(&dm644x_mdio_device);
 	platform_device_register(&dm644x_emac_device);
 
-	return 0;
+	ret = davinci_init_wdt();
+	if (ret)
+		pr_warn("%s: watchdog init failed: %d\n", __func__, ret);
+
+	return ret;
 }
 postcore_initcall(dm644x_init_devices);

arch/arm/mach-davinci/dm646x.c

@@ -955,12 +955,18 @@ void __init dm646x_init(void)
 
 static int __init dm646x_init_devices(void)
 {
+	int ret = 0;
+
 	if (!cpu_is_davinci_dm646x())
 		return 0;
 
 	platform_device_register(&dm646x_mdio_device);
 	platform_device_register(&dm646x_emac_device);
 
-	return 0;
+	ret = davinci_init_wdt();
+	if (ret)
+		pr_warn("%s: watchdog init failed: %d\n", __func__, ret);
+
+	return ret;
 }
 postcore_initcall(dm646x_init_devices);

arch/arm/mach-davinci/include/mach/cputype.h

@@ -33,7 +33,6 @@ struct davinci_id {
 #define	DAVINCI_CPU_ID_DM365		0x03650000
 #define	DAVINCI_CPU_ID_DA830		0x08300000
 #define	DAVINCI_CPU_ID_DA850		0x08500000
-#define	DAVINCI_CPU_ID_TNETV107X	0x0b8a0000
 
 #define IS_DAVINCI_CPU(type, id)					\
 static inline int is_davinci_ ##type(void)				\
@@ -47,7 +46,6 @@ IS_DAVINCI_CPU(dm355, DAVINCI_CPU_ID_DM355)
 IS_DAVINCI_CPU(dm365, DAVINCI_CPU_ID_DM365)
 IS_DAVINCI_CPU(da830, DAVINCI_CPU_ID_DA830)
 IS_DAVINCI_CPU(da850, DAVINCI_CPU_ID_DA850)
-IS_DAVINCI_CPU(tnetv107x, DAVINCI_CPU_ID_TNETV107X)
 
 #ifdef CONFIG_ARCH_DAVINCI_DM644x
 #define cpu_is_davinci_dm644x() is_davinci_dm644x()
@@ -85,10 +83,4 @@ IS_DAVINCI_CPU(tnetv107x, DAVINCI_CPU_ID_TNETV107X)
 #define cpu_is_davinci_da850() 0
 #endif
 
-#ifdef CONFIG_ARCH_DAVINCI_TNETV107X
-#define cpu_is_davinci_tnetv107x() is_davinci_tnetv107x()
-#else
-#define cpu_is_davinci_tnetv107x() 0
-#endif
-
 #endif

arch/arm/mach-davinci/include/mach/irqs.h

@@ -401,103 +401,6 @@
 
 #define DA850_N_CP_INTC_IRQ		101
 
-
-/* TNETV107X specific interrupts */
-#define IRQ_TNETV107X_TDM1_TXDMA		0
-#define IRQ_TNETV107X_EXT_INT_0			1
-#define IRQ_TNETV107X_EXT_INT_1			2
-#define IRQ_TNETV107X_GPIO_INT12		3
-#define IRQ_TNETV107X_GPIO_INT13		4
-#define IRQ_TNETV107X_TIMER_0_TINT12		5
-#define IRQ_TNETV107X_TIMER_1_TINT12		6
-#define IRQ_TNETV107X_UART0			7
-#define IRQ_TNETV107X_TDM1_RXDMA		8
-#define IRQ_TNETV107X_MCDMA_INT0		9
-#define IRQ_TNETV107X_MCDMA_INT1		10
-#define IRQ_TNETV107X_TPCC			11
-#define IRQ_TNETV107X_TPCC_INT0			12
-#define IRQ_TNETV107X_TPCC_INT1			13
-#define IRQ_TNETV107X_TPCC_INT2			14
-#define IRQ_TNETV107X_TPCC_INT3			15
-#define IRQ_TNETV107X_TPTC0			16
-#define IRQ_TNETV107X_TPTC1			17
-#define IRQ_TNETV107X_TIMER_0_TINT34		18
-#define IRQ_TNETV107X_ETHSS			19
-#define IRQ_TNETV107X_TIMER_1_TINT34		20
-#define IRQ_TNETV107X_DSP2ARM_INT0		21
-#define IRQ_TNETV107X_DSP2ARM_INT1		22
-#define IRQ_TNETV107X_ARM_NPMUIRQ		23
-#define IRQ_TNETV107X_USB1			24
-#define IRQ_TNETV107X_VLYNQ			25
-#define IRQ_TNETV107X_UART0_DMATX		26
-#define IRQ_TNETV107X_UART0_DMARX		27
-#define IRQ_TNETV107X_TDM1_TXMCSP		28
-#define IRQ_TNETV107X_SSP			29
-#define IRQ_TNETV107X_MCDMA_INT2		30
-#define IRQ_TNETV107X_MCDMA_INT3		31
-#define IRQ_TNETV107X_TDM_CODECIF_EOT		32
-#define IRQ_TNETV107X_IMCOP_SQR_ARM		33
-#define IRQ_TNETV107X_USB0			34
-#define IRQ_TNETV107X_USB_CDMA			35
-#define IRQ_TNETV107X_LCD			36
-#define IRQ_TNETV107X_KEYPAD			37
-#define IRQ_TNETV107X_KEYPAD_FREE		38
-#define IRQ_TNETV107X_RNG			39
-#define IRQ_TNETV107X_PKA			40
-#define IRQ_TNETV107X_TDM0_TXDMA		41
-#define IRQ_TNETV107X_TDM0_RXDMA		42
-#define IRQ_TNETV107X_TDM0_TXMCSP		43
-#define IRQ_TNETV107X_TDM0_RXMCSP		44
-#define IRQ_TNETV107X_TDM1_RXMCSP		45
-#define IRQ_TNETV107X_SDIO1			46
-#define IRQ_TNETV107X_SDIO0			47
-#define IRQ_TNETV107X_TSC			48
-#define IRQ_TNETV107X_TS			49
-#define IRQ_TNETV107X_UART1			50
-#define IRQ_TNETV107X_MBX_LITE			51
-#define IRQ_TNETV107X_GPIO_INT00		52
-#define IRQ_TNETV107X_GPIO_INT01		53
-#define IRQ_TNETV107X_GPIO_INT02		54
-#define IRQ_TNETV107X_GPIO_INT03		55
-#define IRQ_TNETV107X_UART2			56
-#define IRQ_TNETV107X_UART2_DMATX		57
-#define IRQ_TNETV107X_UART2_DMARX		58
-#define IRQ_TNETV107X_IMCOP_IMX			59
-#define IRQ_TNETV107X_IMCOP_VLCD		60
-#define IRQ_TNETV107X_AES			61
-#define IRQ_TNETV107X_DES			62
-#define IRQ_TNETV107X_SHAMD5			63
-#define IRQ_TNETV107X_TPCC_ERR			68
-#define IRQ_TNETV107X_TPCC_PROT			69
-#define IRQ_TNETV107X_TPTC0_ERR			70
-#define IRQ_TNETV107X_TPTC1_ERR			71
-#define IRQ_TNETV107X_UART0_ERR			72
-#define IRQ_TNETV107X_UART1_ERR			73
-#define IRQ_TNETV107X_AEMIF_ERR			74
-#define IRQ_TNETV107X_DDR_ERR			75
-#define IRQ_TNETV107X_WDTARM_INT0		76
-#define IRQ_TNETV107X_MCDMA_ERR			77
-#define IRQ_TNETV107X_GPIO_ERR			78
-#define IRQ_TNETV107X_MPU_ADDR			79
-#define IRQ_TNETV107X_MPU_PROT			80
-#define IRQ_TNETV107X_IOPU_ADDR			81
-#define IRQ_TNETV107X_IOPU_PROT			82
-#define IRQ_TNETV107X_KEYPAD_ADDR_ERR		83
-#define IRQ_TNETV107X_WDT0_ADDR_ERR		84
-#define IRQ_TNETV107X_WDT1_ADDR_ERR		85
-#define IRQ_TNETV107X_CLKCTL_ADDR_ERR		86
-#define IRQ_TNETV107X_PLL_UNLOCK		87
-#define IRQ_TNETV107X_WDTDSP_INT0		88
-#define IRQ_TNETV107X_SEC_CTRL_VIOLATION	89
-#define IRQ_TNETV107X_KEY_MNG_VIOLATION		90
-#define IRQ_TNETV107X_PBIST_CPU			91
-#define IRQ_TNETV107X_WDTARM			92
-#define IRQ_TNETV107X_PSC			93
-#define IRQ_TNETV107X_MMC0			94
-#define IRQ_TNETV107X_MMC1			95
-
-#define TNETV107X_N_CP_INTC_IRQ			96
-
 /* da850 currently has the most gpio pins (144) */
 #define DAVINCI_N_GPIO			144
 /* da850 currently has the most irqs so use DA850_N_CP_INTC_IRQ */

arch/arm/mach-davinci/include/mach/mux.h

@@ -972,275 +972,6 @@ enum davinci_da850_index {
 	DA850_VPIF_CLKO3,
 };
 
-enum davinci_tnetv107x_index {
-	TNETV107X_ASR_A00,
-	TNETV107X_GPIO32,
-	TNETV107X_ASR_A01,
-	TNETV107X_GPIO33,
-	TNETV107X_ASR_A02,
-	TNETV107X_GPIO34,
-	TNETV107X_ASR_A03,
-	TNETV107X_GPIO35,
-	TNETV107X_ASR_A04,
-	TNETV107X_GPIO36,
-	TNETV107X_ASR_A05,
-	TNETV107X_GPIO37,
-	TNETV107X_ASR_A06,
-	TNETV107X_GPIO38,
-	TNETV107X_ASR_A07,
-	TNETV107X_GPIO39,
-	TNETV107X_ASR_A08,
-	TNETV107X_GPIO40,
-	TNETV107X_ASR_A09,
-	TNETV107X_GPIO41,
-	TNETV107X_ASR_A10,
-	TNETV107X_GPIO42,
-	TNETV107X_ASR_A11,
-	TNETV107X_BOOT_STRP_0,
-	TNETV107X_ASR_A12,
-	TNETV107X_BOOT_STRP_1,
-	TNETV107X_ASR_A13,
-	TNETV107X_GPIO43,
-	TNETV107X_ASR_A14,
-	TNETV107X_GPIO44,
-	TNETV107X_ASR_A15,
-	TNETV107X_GPIO45,
-	TNETV107X_ASR_A16,
-	TNETV107X_GPIO46,
-	TNETV107X_ASR_A17,
-	TNETV107X_GPIO47,
-	TNETV107X_ASR_A18,
-	TNETV107X_GPIO48,
-	TNETV107X_SDIO1_DATA3_0,
-	TNETV107X_ASR_A19,
-	TNETV107X_GPIO49,
-	TNETV107X_SDIO1_DATA2_0,
-	TNETV107X_ASR_A20,
-	TNETV107X_GPIO50,
-	TNETV107X_SDIO1_DATA1_0,
-	TNETV107X_ASR_A21,
-	TNETV107X_GPIO51,
-	TNETV107X_SDIO1_DATA0_0,
-	TNETV107X_ASR_A22,
-	TNETV107X_GPIO52,
-	TNETV107X_SDIO1_CMD_0,
-	TNETV107X_ASR_A23,
-	TNETV107X_GPIO53,
-	TNETV107X_SDIO1_CLK_0,
-	TNETV107X_ASR_BA_1,
-	TNETV107X_GPIO54,
-	TNETV107X_SYS_PLL_CLK,
-	TNETV107X_ASR_CS0,
-	TNETV107X_ASR_CS1,
-	TNETV107X_ASR_CS2,
-	TNETV107X_TDM_PLL_CLK,
-	TNETV107X_ASR_CS3,
-	TNETV107X_ETH_PHY_CLK,
-	TNETV107X_ASR_D00,
-	TNETV107X_GPIO55,
-	TNETV107X_ASR_D01,
-	TNETV107X_GPIO56,
-	TNETV107X_ASR_D02,
-	TNETV107X_GPIO57,
-	TNETV107X_ASR_D03,
-	TNETV107X_GPIO58,
-	TNETV107X_ASR_D04,
-	TNETV107X_GPIO59_0,
-	TNETV107X_ASR_D05,
-	TNETV107X_GPIO60_0,
-	TNETV107X_ASR_D06,
-	TNETV107X_GPIO61_0,
-	TNETV107X_ASR_D07,
-	TNETV107X_GPIO62_0,
-	TNETV107X_ASR_D08,
-	TNETV107X_GPIO63_0,
-	TNETV107X_ASR_D09,
-	TNETV107X_GPIO64_0,
-	TNETV107X_ASR_D10,
-	TNETV107X_SDIO1_DATA3_1,
-	TNETV107X_ASR_D11,
-	TNETV107X_SDIO1_DATA2_1,
-	TNETV107X_ASR_D12,
-	TNETV107X_SDIO1_DATA1_1,
-	TNETV107X_ASR_D13,
-	TNETV107X_SDIO1_DATA0_1,
-	TNETV107X_ASR_D14,
-	TNETV107X_SDIO1_CMD_1,
-	TNETV107X_ASR_D15,
-	TNETV107X_SDIO1_CLK_1,
-	TNETV107X_ASR_OE,
-	TNETV107X_BOOT_STRP_2,
-	TNETV107X_ASR_RNW,
-	TNETV107X_GPIO29_0,
-	TNETV107X_ASR_WAIT,
-	TNETV107X_GPIO30_0,
-	TNETV107X_ASR_WE,
-	TNETV107X_BOOT_STRP_3,
-	TNETV107X_ASR_WE_DQM0,
-	TNETV107X_GPIO31,
-	TNETV107X_LCD_PD17_0,
-	TNETV107X_ASR_WE_DQM1,
-	TNETV107X_ASR_BA0_0,
-	TNETV107X_VLYNQ_CLK,
-	TNETV107X_GPIO14,
-	TNETV107X_LCD_PD19_0,
-	TNETV107X_VLYNQ_RXD0,
-	TNETV107X_GPIO15,
-	TNETV107X_LCD_PD20_0,
-	TNETV107X_VLYNQ_RXD1,
-	TNETV107X_GPIO16,
-	TNETV107X_LCD_PD21_0,
-	TNETV107X_VLYNQ_TXD0,
-	TNETV107X_GPIO17,
-	TNETV107X_LCD_PD22_0,
-	TNETV107X_VLYNQ_TXD1,
-	TNETV107X_GPIO18,
-	TNETV107X_LCD_PD23_0,
-	TNETV107X_SDIO0_CLK,
-	TNETV107X_GPIO19,
-	TNETV107X_SDIO0_CMD,
-	TNETV107X_GPIO20,
-	TNETV107X_SDIO0_DATA0,
-	TNETV107X_GPIO21,
-	TNETV107X_SDIO0_DATA1,
-	TNETV107X_GPIO22,
-	TNETV107X_SDIO0_DATA2,
-	TNETV107X_GPIO23,
-	TNETV107X_SDIO0_DATA3,
-	TNETV107X_GPIO24,
-	TNETV107X_EMU0,
-	TNETV107X_EMU1,
-	TNETV107X_RTCK,
-	TNETV107X_TRST_N,
-	TNETV107X_TCK,
-	TNETV107X_TDI,
-	TNETV107X_TDO,
-	TNETV107X_TMS,
-	TNETV107X_TDM1_CLK,
-	TNETV107X_TDM1_RX,
-	TNETV107X_TDM1_TX,
-	TNETV107X_TDM1_FS,
-	TNETV107X_KEYPAD_R0,
-	TNETV107X_KEYPAD_R1,
-	TNETV107X_KEYPAD_R2,
-	TNETV107X_KEYPAD_R3,
-	TNETV107X_KEYPAD_R4,
-	TNETV107X_KEYPAD_R5,
-	TNETV107X_KEYPAD_R6,
-	TNETV107X_GPIO12,
-	TNETV107X_KEYPAD_R7,
-	TNETV107X_GPIO10,
-	TNETV107X_KEYPAD_C0,
-	TNETV107X_KEYPAD_C1,
-	TNETV107X_KEYPAD_C2,
-	TNETV107X_KEYPAD_C3,
-	TNETV107X_KEYPAD_C4,
-	TNETV107X_KEYPAD_C5,
-	TNETV107X_KEYPAD_C6,
-	TNETV107X_GPIO13,
-	TNETV107X_TEST_CLK_IN,
-	TNETV107X_KEYPAD_C7,
-	TNETV107X_GPIO11,
-	TNETV107X_SSP0_0,
-	TNETV107X_SCC_DCLK,
-	TNETV107X_LCD_PD20_1,
-	TNETV107X_SSP0_1,
-	TNETV107X_SCC_CS_N,
-	TNETV107X_LCD_PD21_1,
-	TNETV107X_SSP0_2,
-	TNETV107X_SCC_D,
-	TNETV107X_LCD_PD22_1,
-	TNETV107X_SSP0_3,
-	TNETV107X_SCC_RESETN,
-	TNETV107X_LCD_PD23_1,
-	TNETV107X_SSP1_0,
-	TNETV107X_GPIO25,
-	TNETV107X_UART2_CTS,
-	TNETV107X_SSP1_1,
-	TNETV107X_GPIO26,
-	TNETV107X_UART2_RD,
-	TNETV107X_SSP1_2,
-	TNETV107X_GPIO27,
-	TNETV107X_UART2_RTS,
-	TNETV107X_SSP1_3,
-	TNETV107X_GPIO28,
-	TNETV107X_UART2_TD,
-	TNETV107X_UART0_CTS,
-	TNETV107X_UART0_RD,
-	TNETV107X_UART0_RTS,
-	TNETV107X_UART0_TD,
-	TNETV107X_UART1_RD,
-	TNETV107X_UART1_TD,
-	TNETV107X_LCD_AC_NCS,
-	TNETV107X_LCD_HSYNC_RNW,
-	TNETV107X_LCD_VSYNC_A0,
-	TNETV107X_LCD_MCLK,
-	TNETV107X_LCD_PD16_0,
-	TNETV107X_LCD_PCLK_E,
-	TNETV107X_LCD_PD00,
-	TNETV107X_LCD_PD01,
-	TNETV107X_LCD_PD02,
-	TNETV107X_LCD_PD03,
-	TNETV107X_LCD_PD04,
-	TNETV107X_LCD_PD05,
-	TNETV107X_LCD_PD06,
-	TNETV107X_LCD_PD07,
-	TNETV107X_LCD_PD08,
-	TNETV107X_GPIO59_1,
-	TNETV107X_LCD_PD09,
-	TNETV107X_GPIO60_1,
-	TNETV107X_LCD_PD10,
-	TNETV107X_ASR_BA0_1,
-	TNETV107X_GPIO61_1,
-	TNETV107X_LCD_PD11,
-	TNETV107X_GPIO62_1,
-	TNETV107X_LCD_PD12,
-	TNETV107X_GPIO63_1,
-	TNETV107X_LCD_PD13,
-	TNETV107X_GPIO64_1,
-	TNETV107X_LCD_PD14,
-	TNETV107X_GPIO29_1,
-	TNETV107X_LCD_PD15,
-	TNETV107X_GPIO30_1,
-	TNETV107X_EINT0,
-	TNETV107X_GPIO08,
-	TNETV107X_EINT1,
-	TNETV107X_GPIO09,
-	TNETV107X_GPIO00,
-	TNETV107X_LCD_PD20_2,
-	TNETV107X_TDM_CLK_IN_2,
-	TNETV107X_GPIO01,
-	TNETV107X_LCD_PD21_2,
-	TNETV107X_24M_CLK_OUT_1,
-	TNETV107X_GPIO02,
-	TNETV107X_LCD_PD22_2,
-	TNETV107X_GPIO03,
-	TNETV107X_LCD_PD23_2,
-	TNETV107X_GPIO04,
-	TNETV107X_LCD_PD16_1,
-	TNETV107X_USB0_RXERR,
-	TNETV107X_GPIO05,
-	TNETV107X_LCD_PD17_1,
-	TNETV107X_TDM_CLK_IN_1,
-	TNETV107X_GPIO06,
-	TNETV107X_LCD_PD18,
-	TNETV107X_24M_CLK_OUT_2,
-	TNETV107X_GPIO07,
-	TNETV107X_LCD_PD19_1,
-	TNETV107X_USB1_RXERR,
-	TNETV107X_ETH_PLL_CLK,
-	TNETV107X_MDIO,
-	TNETV107X_MDC,
-	TNETV107X_AIC_MUTE_STAT_N,
-	TNETV107X_TDM0_CLK,
-	TNETV107X_AIC_HNS_EN_N,
-	TNETV107X_TDM0_FS,
-	TNETV107X_AIC_HDS_EN_STAT_N,
-	TNETV107X_TDM0_TX,
-	TNETV107X_AIC_HNF_EN_STAT_N,
-	TNETV107X_TDM0_RX,
-};
-
 #define PINMUX(x)		(4 * (x))
 
 #ifdef CONFIG_DAVINCI_MUX

arch/arm/mach-davinci/include/mach/psc.h

@@ -182,53 +182,6 @@
 #define DA8XX_LPSC1_CR_P3_SS		26
 #define DA8XX_LPSC1_L3_CBA_RAM		31
 
-/* TNETV107X LPSC Assignments */
-#define TNETV107X_LPSC_ARM			0
-#define TNETV107X_LPSC_GEM			1
-#define TNETV107X_LPSC_DDR2_PHY			2
-#define TNETV107X_LPSC_TPCC			3
-#define TNETV107X_LPSC_TPTC0			4
-#define TNETV107X_LPSC_TPTC1			5
-#define TNETV107X_LPSC_RAM			6
-#define TNETV107X_LPSC_MBX_LITE			7
-#define TNETV107X_LPSC_LCD			8
-#define TNETV107X_LPSC_ETHSS			9
-#define TNETV107X_LPSC_AEMIF			10
-#define TNETV107X_LPSC_CHIP_CFG			11
-#define TNETV107X_LPSC_TSC			12
-#define TNETV107X_LPSC_ROM			13
-#define TNETV107X_LPSC_UART2			14
-#define TNETV107X_LPSC_PKTSEC			15
-#define TNETV107X_LPSC_SECCTL			16
-#define TNETV107X_LPSC_KEYMGR			17
-#define TNETV107X_LPSC_KEYPAD			18
-#define TNETV107X_LPSC_GPIO			19
-#define TNETV107X_LPSC_MDIO			20
-#define TNETV107X_LPSC_SDIO0			21
-#define TNETV107X_LPSC_UART0			22
-#define TNETV107X_LPSC_UART1			23
-#define TNETV107X_LPSC_TIMER0			24
-#define TNETV107X_LPSC_TIMER1			25
-#define TNETV107X_LPSC_WDT_ARM			26
-#define TNETV107X_LPSC_WDT_DSP			27
-#define TNETV107X_LPSC_SSP			28
-#define TNETV107X_LPSC_TDM0			29
-#define TNETV107X_LPSC_VLYNQ			30
-#define TNETV107X_LPSC_MCDMA			31
-#define TNETV107X_LPSC_USB0			32
-#define TNETV107X_LPSC_TDM1			33
-#define TNETV107X_LPSC_DEBUGSS			34
-#define TNETV107X_LPSC_ETHSS_RGMII		35
-#define TNETV107X_LPSC_SYSTEM			36
-#define TNETV107X_LPSC_IMCOP			37
-#define TNETV107X_LPSC_SPARE			38
-#define TNETV107X_LPSC_SDIO1			39
-#define TNETV107X_LPSC_USB1			40
-#define TNETV107X_LPSC_USBSS			41
-#define TNETV107X_LPSC_DDR2_EMIF1_VRST		42
-#define TNETV107X_LPSC_DDR2_EMIF2_VCTL_RST	43
-#define TNETV107X_LPSC_MAX			44
-
 /* PSC register offsets */
 #define EPCPR		0x070
 #define PTCMD		0x120

arch/arm/mach-davinci/include/mach/serial.h

@@ -23,14 +23,6 @@
 #define DA8XX_UART1_BASE	(IO_PHYS + 0x10c000)
 #define DA8XX_UART2_BASE	(IO_PHYS + 0x10d000)
 
-#define TNETV107X_UART0_BASE	0x08108100
-#define TNETV107X_UART1_BASE	0x08088400
-#define TNETV107X_UART2_BASE	0x08108300
-
-#define TNETV107X_UART0_VIRT	IOMEM(0xfee08100)
-#define TNETV107X_UART1_VIRT	IOMEM(0xfed88400)
-#define TNETV107X_UART2_VIRT	IOMEM(0xfee08300)
-
 /* DaVinci UART register offsets */
 #define UART_DAVINCI_PWREMU		0x0c
 #define UART_DM646X_SCR			0x10

arch/arm/mach-davinci/include/mach/tnetv107x.h

-/*
- * Texas Instruments TNETV107X SoC Specific Defines
- *
- * Copyright (C) 2010 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#ifndef __ASM_ARCH_DAVINCI_TNETV107X_H
-#define __ASM_ARCH_DAVINCI_TNETV107X_H
-
-#include <asm/sizes.h>
-
-#define TNETV107X_DDR_BASE	0x80000000
-
-/*
- * Fixed mapping for early init starts here. If low-level debug is enabled,
- * this area also gets mapped via io_pg_offset and io_phys by the boot code.
- * To fit in with the io_pg_offset calculation, the io base address selected
- * here _must_ be a multiple of 2^20.
- */
-#define TNETV107X_IO_BASE	0x08000000
-#define TNETV107X_IO_VIRT	(IO_VIRT + SZ_1M)
-
-#define TNETV107X_N_GPIO	65
-
-#ifndef __ASSEMBLY__
-
-#include <linux/serial_8250.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/mfd/ti_ssp.h>
-#include <linux/reboot.h>
-
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <mach/serial.h>
-
-struct tnetv107x_device_info {
-	struct davinci_mmc_config	*mmc_config[2];  /* 2 controllers */
-	struct davinci_nand_pdata	*nand_config[4]; /* 4 chipsels */
-	struct matrix_keypad_platform_data *keypad_config;
-	struct ti_ssp_data		*ssp_config;
-};
-
-extern struct platform_device tnetv107x_wdt_device;
-extern struct platform_device tnetv107x_serial_device[];
-
-extern void tnetv107x_init(void);
-extern void tnetv107x_devices_init(struct tnetv107x_device_info *);
-extern void tnetv107x_irq_init(void);
-void tnetv107x_restart(enum reboot_mode mode, const char *cmd);
-
-#endif
-
-#endif /* __ASM_ARCH_DAVINCI_TNETV107X_H */

arch/arm/mach-davinci/include/mach/uncompress.h

@@ -68,9 +68,6 @@ static inline void set_uart_info(u32 phys)
 #define DEBUG_LL_DA8XX(machine, port)				\
 	_DEBUG_LL_ENTRY(machine, DA8XX_UART##port##_BASE)
 
-#define DEBUG_LL_TNETV107X(machine, port)			\
-	_DEBUG_LL_ENTRY(machine, TNETV107X_UART##port##_BASE)
-
 static inline void __arch_decomp_setup(unsigned long arch_id)
 {
 	/*
@@ -94,9 +91,6 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
 		DEBUG_LL_DA8XX(davinci_da850_evm,	2);
 		DEBUG_LL_DA8XX(mityomapl138,		1);
 		DEBUG_LL_DA8XX(omapl138_hawkboard,	2);
-
-		/* TNETV107x boards */
-		DEBUG_LL_TNETV107X(tnetv107x,		1);
 	} while (0);
 }
 

arch/arm/mach-dove/Kconfig

@@ -20,18 +20,6 @@ config MACH_CM_A510
 	  Say 'Y' here if you want your kernel to support the
 	  CompuLab CM-A510 Board.
 
-config MACH_DOVE_DT
-	bool "Marvell Dove Flattened Device Tree"
-	select DOVE_CLK
-	select ORION_IRQCHIP
-	select ORION_TIMER
-	select REGULATOR
-	select REGULATOR_FIXED_VOLTAGE
-	select USE_OF
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell Dove using flattened device tree.
-
 endmenu
 
 endif

arch/arm/mach-dove/Makefile

@@ -2,5 +2,4 @@ obj-y				+= common.o
 obj-$(CONFIG_DOVE_LEGACY)	+= irq.o mpp.o
 obj-$(CONFIG_PCI)		+= pcie.o
 obj-$(CONFIG_MACH_DOVE_DB)	+= dove-db-setup.o
-obj-$(CONFIG_MACH_DOVE_DT)	+= board-dt.o
 obj-$(CONFIG_MACH_CM_A510)	+= cm-a510.o

arch/arm/mach-imx/Kconfig

 config ARCH_MXC
 	bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
+	select ARCH_HAS_CPUFREQ
+	select ARCH_HAS_OPP
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_CPU_SUSPEND if PM
 	select CLKSRC_MMIO
-	select GENERIC_ALLOCATOR
 	select GENERIC_IRQ_CHIP
 	select PINCTRL
+	select PM_OPP if PM
 	select SOC_BUS
+	select SRAM
 	help
 	  Support for Freescale MXC/iMX-based family of processors
 
@@ -116,8 +119,8 @@ config SOC_IMX35
 	select ARCH_MXC_IOMUX_V3
 	select HAVE_EPIT
 	select MXC_AVIC
+	select PINCTRL_IMX35
 	select SMP_ON_UP if SMP
-	select PINCTRL
 
 config SOC_IMX5
 	bool
@@ -768,53 +771,43 @@ config	SOC_IMX50
 config	SOC_IMX53
 	bool "i.MX53 support"
 	select HAVE_IMX_SRC
-	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select PINCTRL_IMX53
 	select SOC_IMX5
 
 	help
 	  This enables support for Freescale i.MX53 processor.
 
-config SOC_IMX6Q
-	bool "i.MX6 Quad/DualLite support"
-	select ARCH_HAS_CPUFREQ
-	select ARCH_HAS_OPP
+config SOC_IMX6
+	bool
 	select ARM_ERRATA_754322
-	select ARM_ERRATA_764369 if SMP
 	select ARM_ERRATA_775420
 	select ARM_GIC
-	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if SMP
 	select HAVE_IMX_ANATOP
 	select HAVE_IMX_GPC
 	select HAVE_IMX_MMDC
 	select HAVE_IMX_SRC
 	select MFD_SYSCON
-	select MIGHT_HAVE_PCI
-	select PCI_DOMAINS if PCI
-	select PINCTRL_IMX6Q
 	select PL310_ERRATA_588369 if CACHE_PL310
 	select PL310_ERRATA_727915 if CACHE_PL310
 	select PL310_ERRATA_769419 if CACHE_PL310
-	select PM_OPP if PM
+
+config SOC_IMX6Q
+	bool "i.MX6 Quad/DualLite support"
+	select ARM_ERRATA_764369 if SMP
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if SMP
+	select MIGHT_HAVE_PCI
+	select PCI_DOMAINS if PCI
+	select PINCTRL_IMX6Q
+	select SOC_IMX6
 
 	help
 	  This enables support for Freescale i.MX6 Quad processor.
 
 config SOC_IMX6SL
 	bool "i.MX6 SoloLite support"
-	select ARM_ERRATA_754322
-	select ARM_ERRATA_775420
-	select ARM_GIC
-	select HAVE_IMX_ANATOP
-	select HAVE_IMX_GPC
-	select HAVE_IMX_MMDC
-	select HAVE_IMX_SRC
-	select MFD_SYSCON
 	select PINCTRL_IMX6SL
-	select PL310_ERRATA_588369 if CACHE_PL310
-	select PL310_ERRATA_727915 if CACHE_PL310
-	select PL310_ERRATA_769419 if CACHE_PL310
+	select SOC_IMX6
 
 	help
 	  This enables support for Freescale i.MX6 SoloLite processor.

arch/arm/mach-imx/Makefile

@@ -30,6 +30,7 @@ obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
 ifeq ($(CONFIG_CPU_IDLE),y)
 obj-$(CONFIG_SOC_IMX5) += cpuidle-imx5.o
 obj-$(CONFIG_SOC_IMX6Q) += cpuidle-imx6q.o
+obj-$(CONFIG_SOC_IMX6SL) += cpuidle-imx6sl.o
 endif
 
 ifdef CONFIG_SND_IMX_SOC
@@ -101,9 +102,11 @@ obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
 obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o
 obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o
 
-obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o
-# i.MX6SL reuses i.MX6Q code
-obj-$(CONFIG_SOC_IMX6SL) += pm-imx6q.o headsmp.o
+ifeq ($(CONFIG_SUSPEND),y)
+AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a
+obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o
+endif
+obj-$(CONFIG_SOC_IMX6) += pm-imx6.o
 
 # i.MX5 based machines
 obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o

arch/arm/mach-imx/clk-imx21.c

@@ -149,7 +149,6 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href)
 	clk_register_clkdev(clk[per1], "per", "imx-gpt.1");
 	clk_register_clkdev(clk[gpt3_ipg_gate], "ipg", "imx-gpt.2");
 	clk_register_clkdev(clk[per1], "per", "imx-gpt.2");
-	clk_register_clkdev(clk[pwm_ipg_gate], "pwm", "mxc_pwm.0");
 	clk_register_clkdev(clk[per2], "per", "imx21-cspi.0");
 	clk_register_clkdev(clk[cspi1_ipg_gate], "ipg", "imx21-cspi.0");
 	clk_register_clkdev(clk[per2], "per", "imx21-cspi.1");

arch/arm/mach-imx/clk-imx25.c

@@ -265,14 +265,6 @@ int __init mx25_clocks_init(void)
 	clk_register_clkdev(clk[cspi1_ipg], NULL, "imx35-cspi.0");
 	clk_register_clkdev(clk[cspi2_ipg], NULL, "imx35-cspi.1");
 	clk_register_clkdev(clk[cspi3_ipg], NULL, "imx35-cspi.2");
-	clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.0");
-	clk_register_clkdev(clk[per10], "per", "mxc_pwm.0");
-	clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.1");
-	clk_register_clkdev(clk[per10], "per", "mxc_pwm.1");
-	clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.2");
-	clk_register_clkdev(clk[per10], "per", "mxc_pwm.2");
-	clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.3");
-	clk_register_clkdev(clk[per10], "per", "mxc_pwm.3");
 	clk_register_clkdev(clk[kpp_ipg], NULL, "imx-keypad");
 	clk_register_clkdev(clk[tsc_ipg], NULL, "mx25-adc");
 	clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.0");

arch/arm/mach-imx/clk-imx27.c

@@ -231,7 +231,6 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.4");
 	clk_register_clkdev(clk[gpt6_ipg_gate], "ipg", "imx-gpt.5");
 	clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.5");
-	clk_register_clkdev(clk[pwm_ipg_gate], NULL, "mxc_pwm.0");
 	clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.0");
 	clk_register_clkdev(clk[sdhc1_ipg_gate], "ipg", "imx21-mmc.0");
 	clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.1");

arch/arm/mach-imx/clk-imx51-imx53.c

@@ -266,8 +266,6 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
 	clk_register_clkdev(clk[IMX5_CLK_ECSPI2_PER_GATE], "per", "imx51-ecspi.1");
 	clk_register_clkdev(clk[IMX5_CLK_ECSPI2_IPG_GATE], "ipg", "imx51-ecspi.1");
 	clk_register_clkdev(clk[IMX5_CLK_CSPI_IPG_GATE], NULL, "imx35-cspi.2");
-	clk_register_clkdev(clk[IMX5_CLK_PWM1_IPG_GATE], "pwm", "mxc_pwm.0");
-	clk_register_clkdev(clk[IMX5_CLK_PWM2_IPG_GATE], "pwm", "mxc_pwm.1");
 	clk_register_clkdev(clk[IMX5_CLK_I2C1_GATE], NULL, "imx21-i2c.0");
 	clk_register_clkdev(clk[IMX5_CLK_I2C2_GATE], NULL, "imx21-i2c.1");
 	clk_register_clkdev(clk[IMX5_CLK_USBOH3_PER_GATE], "per", "mxc-ehci.0");

arch/arm/mach-imx/clk-imx6q.c

@@ -437,12 +437,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 
 	clk_register_clkdev(clk[gpt_ipg], "ipg", "imx-gpt.0");
 	clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
-	clk_register_clkdev(clk[cko1_sel], "cko1_sel", NULL);
-	clk_register_clkdev(clk[ahb], "ahb", NULL);
-	clk_register_clkdev(clk[cko1], "cko1", NULL);
-	clk_register_clkdev(clk[arm], NULL, "cpu0");
-	clk_register_clkdev(clk[pll4_post_div], "pll4_post_div", NULL);
-	clk_register_clkdev(clk[pll4_audio], "pll4_audio", NULL);
+	clk_register_clkdev(clk[enet_ref], "enet_ref", NULL);
 
 	if ((imx_get_soc_revision() != IMX_CHIP_REVISION_1_0) ||
 	    cpu_is_imx6dl()) {

arch/arm/mach-imx/clk-imx6sl.c

 /*
- * Copyright 2013 Freescale Semiconductor, Inc.
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -18,27 +18,43 @@
 #include "clk.h"
 #include "common.h"
 
-static const char const *step_sels[]		= { "osc", "pll2_pfd2", };
-static const char const *pll1_sw_sels[]		= { "pll1_sys", "step", };
-static const char const *ocram_alt_sels[]	= { "pll2_pfd2", "pll3_pfd1", };
-static const char const *ocram_sels[]		= { "periph", "ocram_alt_sels", };
-static const char const *pre_periph_sels[]	= { "pll2_bus", "pll2_pfd2", "pll2_pfd0", "pll2_198m", };
-static const char const *periph_clk2_sels[]	= { "pll3_usb_otg", "osc", "osc", "dummy", };
-static const char const *periph2_clk2_sels[]	= { "pll3_usb_otg", "pll2_bus", };
-static const char const *periph_sels[]		= { "pre_periph_sel", "periph_clk2_podf", };
-static const char const *periph2_sels[]		= { "pre_periph2_sel", "periph2_clk2_podf", };
-static const char const *csi_lcdif_sels[]	= { "mmdc", "pll2_pfd2", "pll3_120m", "pll3_pfd1", };
-static const char const *usdhc_sels[]		= { "pll2_pfd2", "pll2_pfd0", };
-static const char const *ssi_sels[]		= { "pll3_pfd2", "pll3_pfd3", "pll4_audio_div", "dummy", };
-static const char const *perclk_sels[]		= { "ipg", "osc", };
-static const char const *epdc_pxp_sels[]	= { "mmdc", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd2", "pll3_pfd1", };
-static const char const *gpu2d_ovg_sels[]	= { "pll3_pfd1", "pll3_usb_otg", "pll2_bus", "pll2_pfd2", };
-static const char const *gpu2d_sels[]		= { "pll2_pfd2", "pll3_usb_otg", "pll3_pfd1", "pll2_bus", };
-static const char const *lcdif_pix_sels[]	= { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll3_pfd0", "pll3_pfd1", };
-static const char const *epdc_pix_sels[]	= { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd1", "pll3_pfd1", };
-static const char const *audio_sels[]		= { "pll4_audio_div", "pll3_pfd2", "pll3_pfd3", "pll3_usb_otg", };
-static const char const *ecspi_sels[]		= { "pll3_60m", "osc", };
-static const char const *uart_sels[]		= { "pll3_80m", "osc", };
+#define CCSR			0xc
+#define BM_CCSR_PLL1_SW_CLK_SEL	(1 << 2)
+#define CACRR			0x10
+#define CDHIPR			0x48
+#define BM_CDHIPR_ARM_PODF_BUSY	(1 << 16)
+#define ARM_WAIT_DIV_396M	2
+#define ARM_WAIT_DIV_792M	4
+#define ARM_WAIT_DIV_996M	6
+
+#define PLL_ARM			0x0
+#define BM_PLL_ARM_DIV_SELECT	(0x7f << 0)
+#define BM_PLL_ARM_POWERDOWN	(1 << 12)
+#define BM_PLL_ARM_ENABLE	(1 << 13)
+#define BM_PLL_ARM_LOCK		(1 << 31)
+#define PLL_ARM_DIV_792M	66
+
+static const char *step_sels[]		= { "osc", "pll2_pfd2", };
+static const char *pll1_sw_sels[]	= { "pll1_sys", "step", };
+static const char *ocram_alt_sels[]	= { "pll2_pfd2", "pll3_pfd1", };
+static const char *ocram_sels[]		= { "periph", "ocram_alt_sels", };
+static const char *pre_periph_sels[]	= { "pll2_bus", "pll2_pfd2", "pll2_pfd0", "pll2_198m", };
+static const char *periph_clk2_sels[]	= { "pll3_usb_otg", "osc", "osc", "dummy", };
+static const char *periph2_clk2_sels[]	= { "pll3_usb_otg", "pll2_bus", };
+static const char *periph_sels[]	= { "pre_periph_sel", "periph_clk2_podf", };
+static const char *periph2_sels[]	= { "pre_periph2_sel", "periph2_clk2_podf", };
+static const char *csi_lcdif_sels[]	= { "mmdc", "pll2_pfd2", "pll3_120m", "pll3_pfd1", };
+static const char *usdhc_sels[]		= { "pll2_pfd2", "pll2_pfd0", };
+static const char *ssi_sels[]		= { "pll3_pfd2", "pll3_pfd3", "pll4_audio_div", "dummy", };
+static const char *perclk_sels[]	= { "ipg", "osc", };
+static const char *epdc_pxp_sels[]	= { "mmdc", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd2", "pll3_pfd1", };
+static const char *gpu2d_ovg_sels[]	= { "pll3_pfd1", "pll3_usb_otg", "pll2_bus", "pll2_pfd2", };
+static const char *gpu2d_sels[]		= { "pll2_pfd2", "pll3_usb_otg", "pll3_pfd1", "pll2_bus", };
+static const char *lcdif_pix_sels[]	= { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll3_pfd0", "pll3_pfd1", };
+static const char *epdc_pix_sels[]	= { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd1", "pll3_pfd1", };
+static const char *audio_sels[]		= { "pll4_audio_div", "pll3_pfd2", "pll3_pfd3", "pll3_usb_otg", };
+static const char *ecspi_sels[]		= { "pll3_60m", "osc", };
+static const char *uart_sels[]		= { "pll3_80m", "osc", };
 
 static struct clk_div_table clk_enet_ref_table[] = {
 	{ .val = 0, .div = 20, },
@@ -65,6 +81,89 @@ static struct clk_div_table video_div_table[] = {
 
 static struct clk *clks[IMX6SL_CLK_END];
 static struct clk_onecell_data clk_data;
+static void __iomem *ccm_base;
+static void __iomem *anatop_base;
+
+static const u32 clks_init_on[] __initconst = {
+	IMX6SL_CLK_IPG, IMX6SL_CLK_ARM, IMX6SL_CLK_MMDC_ROOT,
+};
+
+/*
+ * ERR005311 CCM: After exit from WAIT mode, unwanted interrupt(s) taken
+ *           during WAIT mode entry process could cause cache memory
+ *           corruption.
+ *
+ * Software workaround:
+ *     To prevent this issue from occurring, software should ensure that the
+ * ARM to IPG clock ratio is less than 12:5 (that is < 2.4x), before
+ * entering WAIT mode.
+ *
+ * This function will set the ARM clk to max value within the 12:5 limit.
+ * As IPG clock is fixed at 66MHz(so ARM freq must not exceed 158.4MHz),
+ * ARM freq are one of below setpoints: 396MHz, 792MHz and 996MHz, since
+ * the clk APIs can NOT be called in idle thread(may cause kernel schedule
+ * as there is sleep function in PLL wait function), so here we just slow
+ * down ARM to below freq according to previous freq:
+ *
+ * run mode      wait mode
+ * 396MHz   ->   132MHz;
+ * 792MHz   ->   158.4MHz;
+ * 996MHz   ->   142.3MHz;
+ */
+static int imx6sl_get_arm_divider_for_wait(void)
+{
+	if (readl_relaxed(ccm_base + CCSR) & BM_CCSR_PLL1_SW_CLK_SEL) {
+		return ARM_WAIT_DIV_396M;
+	} else {
+		if ((readl_relaxed(anatop_base + PLL_ARM) &
+			BM_PLL_ARM_DIV_SELECT) == PLL_ARM_DIV_792M)
+			return ARM_WAIT_DIV_792M;
+		else
+			return ARM_WAIT_DIV_996M;
+	}
+}
+
+static void imx6sl_enable_pll_arm(bool enable)
+{
+	static u32 saved_pll_arm;
+	u32 val;
+
+	if (enable) {
+		saved_pll_arm = val = readl_relaxed(anatop_base + PLL_ARM);
+		val |= BM_PLL_ARM_ENABLE;
+		val &= ~BM_PLL_ARM_POWERDOWN;
+		writel_relaxed(val, anatop_base + PLL_ARM);
+		while (!(__raw_readl(anatop_base + PLL_ARM) & BM_PLL_ARM_LOCK))
+			;
+	} else {
+		 writel_relaxed(saved_pll_arm, anatop_base + PLL_ARM);
+	}
+}
+
+void imx6sl_set_wait_clk(bool enter)
+{
+	static unsigned long saved_arm_div;
+	int arm_div_for_wait = imx6sl_get_arm_divider_for_wait();
+
+	/*
+	 * According to hardware design, arm podf change need
+	 * PLL1 clock enabled.
+	 */
+	if (arm_div_for_wait == ARM_WAIT_DIV_396M)
+		imx6sl_enable_pll_arm(true);
+
+	if (enter) {
+		saved_arm_div = readl_relaxed(ccm_base + CACRR);
+		writel_relaxed(arm_div_for_wait, ccm_base + CACRR);
+	} else {
+		writel_relaxed(saved_arm_div, ccm_base + CACRR);
+	}
+	while (__raw_readl(ccm_base + CDHIPR) & BM_CDHIPR_ARM_PODF_BUSY)
+		;
+
+	if (arm_div_for_wait == ARM_WAIT_DIV_396M)
+		imx6sl_enable_pll_arm(false);
+}
 
 static void __init imx6sl_clocks_init(struct device_node *ccm_node)
 {
@@ -72,6 +171,7 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
 	void __iomem *base;
 	int irq;
 	int i;
+	int ret;
 
 	clks[IMX6SL_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
 	clks[IMX6SL_CLK_CKIL] = imx_obtain_fixed_clock("ckil", 0);
@@ -80,6 +180,7 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6sl-anatop");
 	base = of_iomap(np, 0);
 	WARN_ON(!base);
+	anatop_base = base;
 
 	/*                                             type               name            parent  base         div_mask */
 	clks[IMX6SL_CLK_PLL1_SYS]      = imx_clk_pllv3(IMX_PLLV3_SYS,	  "pll1_sys",	   "osc", base,        0x7f);
@@ -127,6 +228,7 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
 	np = ccm_node;
 	base = of_iomap(np, 0);
 	WARN_ON(!base);
+	ccm_base = base;
 
 	/* Reuse imx6q pm code */
 	imx6q_pm_set_ccm_base(base);
@@ -258,6 +360,19 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
 	clk_register_clkdev(clks[IMX6SL_CLK_GPT], "ipg", "imx-gpt.0");
 	clk_register_clkdev(clks[IMX6SL_CLK_GPT_SERIAL], "per", "imx-gpt.0");
 
+	/* Ensure the AHB clk is at 132MHz. */
+	ret = clk_set_rate(clks[IMX6SL_CLK_AHB], 132000000);
+	if (ret)
+		pr_warn("%s: failed to set AHB clock rate %d!\n",
+			__func__, ret);
+
+	/*
+	 * Make sure those always on clocks are enabled to maintain the correct
+	 * usecount and enabling/disabling of parent PLLs.
+	 */
+	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
+		clk_prepare_enable(clks[clks_init_on[i]]);
+
 	if (IS_ENABLED(CONFIG_USB_MXS_PHY)) {
 		clk_prepare_enable(clks[IMX6SL_CLK_USBPHY1_GATE]);
 		clk_prepare_enable(clks[IMX6SL_CLK_USBPHY2_GATE]);

arch/arm/mach-imx/clk-vf610.c

@@ -63,25 +63,25 @@ static void __iomem *anatop_base;
 static void __iomem *ccm_base;
 
 /* sources for multiplexer clocks, this is used multiple times */
-static const char const *fast_sels[]	= { "firc", "fxosc", };
-static const char const *slow_sels[]	= { "sirc_32k", "sxosc", };
-static const char const *pll1_sels[]	= { "pll1_main", "pll1_pfd1", "pll1_pfd2", "pll1_pfd3", "pll1_pfd4", };
-static const char const *pll2_sels[]	= { "pll2_main", "pll2_pfd1", "pll2_pfd2", "pll2_pfd3", "pll2_pfd4", };
-static const char const *sys_sels[]	= { "fast_clk_sel", "slow_clk_sel", "pll2_pfd_sel", "pll2_main", "pll1_pfd_sel", "pll3_main", };
-static const char const *ddr_sels[]	= { "pll2_pfd2", "sys_sel", };
-static const char const *rmii_sels[]	= { "enet_ext", "audio_ext", "enet_50m", "enet_25m", };
-static const char const *enet_ts_sels[]	= { "enet_ext", "fxosc", "audio_ext", "usb", "enet_ts", "enet_25m", "enet_50m", };
-static const char const *esai_sels[]	= { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", };
-static const char const *sai_sels[]	= { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", };
-static const char const *nfc_sels[]	= { "platform_bus", "pll1_pfd1", "pll3_pfd1", "pll3_pfd3", };
-static const char const *qspi_sels[]	= { "pll3_main", "pll3_pfd4", "pll2_pfd4", "pll1_pfd4", };
-static const char const *esdhc_sels[]	= { "pll3_main", "pll3_pfd3", "pll1_pfd3", "platform_bus", };
-static const char const *dcu_sels[]	= { "pll1_pfd2", "pll3_main", };
-static const char const *gpu_sels[]	= { "pll2_pfd2", "pll3_pfd2", };
-static const char const *vadc_sels[]	= { "pll6_main_div", "pll3_main_div", "pll3_main", };
+static const char *fast_sels[]	= { "firc", "fxosc", };
+static const char *slow_sels[]	= { "sirc_32k", "sxosc", };
+static const char *pll1_sels[]	= { "pll1_main", "pll1_pfd1", "pll1_pfd2", "pll1_pfd3", "pll1_pfd4", };
+static const char *pll2_sels[]	= { "pll2_main", "pll2_pfd1", "pll2_pfd2", "pll2_pfd3", "pll2_pfd4", };
+static const char *sys_sels[]	= { "fast_clk_sel", "slow_clk_sel", "pll2_pfd_sel", "pll2_main", "pll1_pfd_sel", "pll3_main", };
+static const char *ddr_sels[]	= { "pll2_pfd2", "sys_sel", };
+static const char *rmii_sels[]	= { "enet_ext", "audio_ext", "enet_50m", "enet_25m", };
+static const char *enet_ts_sels[]	= { "enet_ext", "fxosc", "audio_ext", "usb", "enet_ts", "enet_25m", "enet_50m", };
+static const char *esai_sels[]	= { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", };
+static const char *sai_sels[]	= { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", };
+static const char *nfc_sels[]	= { "platform_bus", "pll1_pfd1", "pll3_pfd1", "pll3_pfd3", };
+static const char *qspi_sels[]	= { "pll3_main", "pll3_pfd4", "pll2_pfd4", "pll1_pfd4", };
+static const char *esdhc_sels[]	= { "pll3_main", "pll3_pfd3", "pll1_pfd3", "platform_bus", };
+static const char *dcu_sels[]	= { "pll1_pfd2", "pll3_main", };
+static const char *gpu_sels[]	= { "pll2_pfd2", "pll3_pfd2", };
+static const char *vadc_sels[]	= { "pll6_main_div", "pll3_main_div", "pll3_main", };
 /* FTM counter clock source, not module clock */
-static const char const *ftm_ext_sels[]	= {"sirc_128k", "sxosc", "fxosc_half", "audio_ext", };
-static const char const *ftm_fix_sels[]	= { "sxosc", "ipg_bus", };
+static const char *ftm_ext_sels[]	= {"sirc_128k", "sxosc", "fxosc_half", "audio_ext", };
+static const char *ftm_fix_sels[]	= { "sxosc", "ipg_bus", };
 
 static struct clk_div_table pll4_main_div_table[] = {
 	{ .val = 0, .div = 1 },

arch/arm/mach-imx/common.h

 /*
- * Copyright 2004-2013 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2004-2014 Freescale Semiconductor, Inc. All Rights Reserved.
  */
 
 /*
@@ -116,7 +116,6 @@ void imx_enable_cpu(int cpu, bool enable);
 void imx_set_cpu_jump(int cpu, void *jump_addr);
 u32 imx_get_cpu_arg(int cpu);
 void imx_set_cpu_arg(int cpu, u32 arg);
-void v7_cpu_resume(void);
 #ifdef CONFIG_SMP
 void v7_secondary_startup(void);
 void imx_scu_map_io(void);
@@ -139,13 +138,25 @@ void imx_anatop_init(void);
 void imx_anatop_pre_suspend(void);
 void imx_anatop_post_resume(void);
 int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
-void imx6q_set_chicken_bit(void);
+void imx6q_set_int_mem_clk_lpm(void);
+void imx6sl_set_wait_clk(bool enter);
 
 void imx_cpu_die(unsigned int cpu);
 int imx_cpu_kill(unsigned int cpu);
 
+#ifdef CONFIG_SUSPEND
+void v7_cpu_resume(void);
+void imx6_suspend(void __iomem *ocram_vbase);
+#else
+static inline void v7_cpu_resume(void) {}
+static inline void imx6_suspend(void __iomem *ocram_vbase) {}
+#endif
+
 void imx6q_pm_init(void);
+void imx6dl_pm_init(void);
+void imx6sl_pm_init(void);
 void imx6q_pm_set_ccm_base(void __iomem *base);
+
 #ifdef CONFIG_PM
 void imx5_pm_init(void);
 #else

arch/arm/mach-imx/cpuidle-imx6q.c

@@ -68,8 +68,8 @@ int __init imx6q_cpuidle_init(void)
 	/* Need to enable SCU standby for entering WAIT modes */
 	imx_scu_standby_enable();
 
-	/* Set chicken bit to get a reliable WAIT mode support */
-	imx6q_set_chicken_bit();
+	/* Set INT_MEM_CLK_LPM bit to get a reliable WAIT mode support */
+	imx6q_set_int_mem_clk_lpm();
 
 	return cpuidle_register(&imx6q_cpuidle_driver, NULL);
 }

arch/arm/mach-imx/cpuidle-imx6sl.c

+/*
+ * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/cpuidle.h>
+#include <linux/module.h>
+#include <asm/cpuidle.h>
+#include <asm/proc-fns.h>
+
+#include "common.h"
+#include "cpuidle.h"
+
+static int imx6sl_enter_wait(struct cpuidle_device *dev,
+			    struct cpuidle_driver *drv, int index)
+{
+	imx6q_set_lpm(WAIT_UNCLOCKED);
+	/*
+	 * Software workaround for ERR005311, see function
+	 * description for details.
+	 */
+	imx6sl_set_wait_clk(true);
+	cpu_do_idle();
+	imx6sl_set_wait_clk(false);
+	imx6q_set_lpm(WAIT_CLOCKED);
+
+	return index;
+}
+
+static struct cpuidle_driver imx6sl_cpuidle_driver = {
+	.name = "imx6sl_cpuidle",
+	.owner = THIS_MODULE,
+	.states = {
+		/* WFI */
+		ARM_CPUIDLE_WFI_STATE,
+		/* WAIT */
+		{
+			.exit_latency = 50,
+			.target_residency = 75,
+			.flags = CPUIDLE_FLAG_TIME_VALID |
+				CPUIDLE_FLAG_TIMER_STOP,
+			.enter = imx6sl_enter_wait,
+			.name = "WAIT",
+			.desc = "Clock off",
+		},
+	},
+	.state_count = 2,
+	.safe_state_index = 0,
+};
+
+int __init imx6sl_cpuidle_init(void)
+{
+	return cpuidle_register(&imx6sl_cpuidle_driver, NULL);
+}

arch/arm/mach-imx/cpuidle.h

@@ -13,6 +13,7 @@
 #ifdef CONFIG_CPU_IDLE
 extern int imx5_cpuidle_init(void);
 extern int imx6q_cpuidle_init(void);
+extern int imx6sl_cpuidle_init(void);
 #else
 static inline int imx5_cpuidle_init(void)
 {
@@ -22,4 +23,8 @@ static inline int imx6q_cpuidle_init(void)
 {
 	return 0;
 }
+static inline int imx6sl_cpuidle_init(void)
+{
+	return 0;
+}
 #endif

arch/arm/mach-imx/devices-imx25.h

@@ -83,7 +83,3 @@ extern const struct imx_spi_imx_data imx25_cspi_data[];
 #define imx25_add_spi_imx0(pdata)	imx25_add_spi_imx(0, pdata)
 #define imx25_add_spi_imx1(pdata)	imx25_add_spi_imx(1, pdata)
 #define imx25_add_spi_imx2(pdata)	imx25_add_spi_imx(2, pdata)
-
-extern struct imx_mxc_pwm_data imx25_mxc_pwm_data[];
-#define imx25_add_mxc_pwm(id)	\
-	imx_add_mxc_pwm(&imx25_mxc_pwm_data[id])

arch/arm/mach-imx/devices-imx51.h

@@ -57,10 +57,6 @@ extern const struct imx_imx2_wdt_data imx51_imx2_wdt_data[];
 #define imx51_add_imx2_wdt(id)	\
 	imx_add_imx2_wdt(&imx51_imx2_wdt_data[id])
 
-extern const struct imx_mxc_pwm_data imx51_mxc_pwm_data[];
-#define imx51_add_mxc_pwm(id)	\
-	imx_add_mxc_pwm(&imx51_mxc_pwm_data[id])
-
 extern const struct imx_imx_keypad_data imx51_imx_keypad_data;
 #define imx51_add_imx_keypad(pdata)	\
 	imx_add_imx_keypad(&imx51_imx_keypad_data, pdata)

arch/arm/mach-imx/devices/Kconfig

@@ -67,9 +67,6 @@ config IMX_HAVE_PLATFORM_MXC_MMC
 config IMX_HAVE_PLATFORM_MXC_NAND
 	bool
 
-config IMX_HAVE_PLATFORM_MXC_PWM
-	bool
-
 config IMX_HAVE_PLATFORM_MXC_RNGA
 	bool
 	select ARCH_HAS_RNGA

arch/arm/mach-imx/devices/Makefile

@@ -23,7 +23,6 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_CAMERA) += platform-mx2-camera.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_EHCI) += platform-mxc-ehci.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_MMC) += platform-mxc-mmc.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_NAND) += platform-mxc_nand.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_PWM) += platform-mxc_pwm.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RNGA) += platform-mxc_rnga.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RTC) += platform-mxc_rtc.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o

arch/arm/mach-imx/devices/devices-common.h

@@ -290,15 +290,6 @@ struct imx_pata_imx_data {
 struct platform_device *__init imx_add_pata_imx(
 		const struct imx_pata_imx_data *data);
 
-struct imx_mxc_pwm_data {
-	int id;
-	resource_size_t iobase;
-	resource_size_t iosize;
-	resource_size_t irq;
-};
-struct platform_device *__init imx_add_mxc_pwm(
-		const struct imx_mxc_pwm_data *data);
-
 /* mxc_rtc */
 struct imx_mxc_rtc_data {
 	const char *devid;

arch/arm/mach-imx/devices/platform-mxc_pwm.c

-/*
- * Copyright (C) 2009-2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_mxc_pwm_data_entry_single(soc, _id, _hwid, _size)		\
-	{								\
-		.id = _id,						\
-		.iobase = soc ## _PWM ## _hwid ## _BASE_ADDR,		\
-		.iosize = _size,					\
-		.irq = soc ## _INT_PWM ## _hwid,			\
-	}
-#define imx_mxc_pwm_data_entry(soc, _id, _hwid, _size)			\
-	[_id] = imx_mxc_pwm_data_entry_single(soc, _id, _hwid, _size)
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_mxc_pwm_data imx21_mxc_pwm_data __initconst =
-	imx_mxc_pwm_data_entry_single(MX21, 0, , SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX21 */
-
-#ifdef CONFIG_SOC_IMX25
-const struct imx_mxc_pwm_data imx25_mxc_pwm_data[] __initconst = {
-#define imx25_mxc_pwm_data_entry(_id, _hwid)				\
-	imx_mxc_pwm_data_entry(MX25, _id, _hwid, SZ_16K)
-	imx25_mxc_pwm_data_entry(0, 1),
-	imx25_mxc_pwm_data_entry(1, 2),
-	imx25_mxc_pwm_data_entry(2, 3),
-	imx25_mxc_pwm_data_entry(3, 4),
-};
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_mxc_pwm_data imx27_mxc_pwm_data __initconst =
-	imx_mxc_pwm_data_entry_single(MX27, 0, , SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX51
-const struct imx_mxc_pwm_data imx51_mxc_pwm_data[] __initconst = {
-#define imx51_mxc_pwm_data_entry(_id, _hwid)				\
-	imx_mxc_pwm_data_entry(MX51, _id, _hwid, SZ_16K)
-	imx51_mxc_pwm_data_entry(0, 1),
-	imx51_mxc_pwm_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-struct platform_device *__init imx_add_mxc_pwm(
-		const struct imx_mxc_pwm_data *data)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + data->iosize - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irq,
-			.end = data->irq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return imx_add_platform_device("mxc_pwm", data->id,
-			res, ARRAY_SIZE(res), NULL, 0);
-}

arch/arm/mach-imx/hardware.h

 /*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2004-2007, 2014 Freescale Semiconductor, Inc. All Rights Reserved.
  * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
  *
  * This program is free software; you can redistribute it and/or
@@ -20,7 +20,9 @@
 #ifndef __ASM_ARCH_MXC_HARDWARE_H__
 #define __ASM_ARCH_MXC_HARDWARE_H__
 
+#ifndef __ASSEMBLY__
 #include <asm/io.h>
+#endif
 #include <asm/sizes.h>
 
 #define addr_in_module(addr, mod) \

arch/arm/mach-imx/headsmp.S

@@ -12,12 +12,7 @@
 
 #include <linux/linkage.h>
 #include <linux/init.h>
-#include <asm/asm-offsets.h>
-#include <asm/hardware/cache-l2x0.h>
 
-	.section ".text.head", "ax"
-
-#ifdef CONFIG_SMP
 diag_reg_offset:
 	.word	g_diag_reg - .
 
@@ -34,38 +29,3 @@ ENTRY(v7_secondary_startup)
 	set_diag_reg
 	b	secondary_startup
 ENDPROC(v7_secondary_startup)
-#endif
-
-#ifdef CONFIG_ARM_CPU_SUSPEND
-/*
- * The following code must assume it is running from physical address
- * where absolute virtual addresses to the data section have to be
- * turned into relative ones.
- */
-
-#ifdef CONFIG_CACHE_L2X0
-	.macro	pl310_resume
-	adr	r0, l2x0_saved_regs_offset
-	ldr	r2, [r0]
-	add	r2, r2, r0
-	ldr	r0, [r2, #L2X0_R_PHY_BASE]	@ get physical base of l2x0
-	ldr	r1, [r2, #L2X0_R_AUX_CTRL]	@ get aux_ctrl value
-	str	r1, [r0, #L2X0_AUX_CTRL]	@ restore aux_ctrl
-	mov	r1, #0x1
-	str	r1, [r0, #L2X0_CTRL]		@ re-enable L2
-	.endm
-
-l2x0_saved_regs_offset:
-	.word	l2x0_saved_regs - .
-
-#else
-	.macro	pl310_resume
-	.endm
-#endif
-
-ENTRY(v7_cpu_resume)
-	bl	v7_invalidate_l1
-	pl310_resume
-	b	cpu_resume
-ENDPROC(v7_cpu_resume)
-#endif

arch/arm/mach-imx/mach-imx6q.c

@@ -182,16 +182,83 @@ static void __init imx6q_enet_phy_init(void)
 
 static void __init imx6q_1588_init(void)
 {
+	struct device_node *np;
+	struct clk *ptp_clk;
+	struct clk *enet_ref;
 	struct regmap *gpr;
+	u32 clksel;
 
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-fec");
+	if (!np) {
+		pr_warn("%s: failed to find fec node\n", __func__);
+		return;
+	}
+
+	ptp_clk = of_clk_get(np, 2);
+	if (IS_ERR(ptp_clk)) {
+		pr_warn("%s: failed to get ptp clock\n", __func__);
+		goto put_node;
+	}
+
+	enet_ref = clk_get_sys(NULL, "enet_ref");
+	if (IS_ERR(enet_ref)) {
+		pr_warn("%s: failed to get enet clock\n", __func__);
+		goto put_ptp_clk;
+	}
+
+	/*
+	 * If enet_ref from ANATOP/CCM is the PTP clock source, we need to
+	 * set bit IOMUXC_GPR1[21].  Or the PTP clock must be from pad
+	 * (external OSC), and we need to clear the bit.
+	 */
+	clksel = ptp_clk == enet_ref ? IMX6Q_GPR1_ENET_CLK_SEL_ANATOP :
+				       IMX6Q_GPR1_ENET_CLK_SEL_PAD;
 	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
 	if (!IS_ERR(gpr))
 		regmap_update_bits(gpr, IOMUXC_GPR1,
 				IMX6Q_GPR1_ENET_CLK_SEL_MASK,
-				IMX6Q_GPR1_ENET_CLK_SEL_ANATOP);
+				clksel);
 	else
 		pr_err("failed to find fsl,imx6q-iomux-gpr regmap\n");
 
+	clk_put(enet_ref);
+put_ptp_clk:
+	clk_put(ptp_clk);
+put_node:
+	of_node_put(np);
+}
+
+static void __init imx6q_axi_init(void)
+{
+	struct regmap *gpr;
+	unsigned int mask;
+
+	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
+	if (!IS_ERR(gpr)) {
+		/*
+		 * Enable the cacheable attribute of VPU and IPU
+		 * AXI transactions.
+		 */
+		mask = IMX6Q_GPR4_VPU_WR_CACHE_SEL |
+			IMX6Q_GPR4_VPU_RD_CACHE_SEL |
+			IMX6Q_GPR4_VPU_P_WR_CACHE_VAL |
+			IMX6Q_GPR4_VPU_P_RD_CACHE_VAL_MASK |
+			IMX6Q_GPR4_IPU_WR_CACHE_CTL |
+			IMX6Q_GPR4_IPU_RD_CACHE_CTL;
+		regmap_update_bits(gpr, IOMUXC_GPR4, mask, mask);
+
+		/* Increase IPU read QoS priority */
+		regmap_update_bits(gpr, IOMUXC_GPR6,
+				IMX6Q_GPR6_IPU1_ID00_RD_QOS_MASK |
+				IMX6Q_GPR6_IPU1_ID01_RD_QOS_MASK,
+				(0xf << 16) | (0x7 << 20));
+		regmap_update_bits(gpr, IOMUXC_GPR7,
+				IMX6Q_GPR7_IPU2_ID00_RD_QOS_MASK |
+				IMX6Q_GPR7_IPU2_ID01_RD_QOS_MASK,
+				(0xf << 16) | (0x7 << 20));
+	} else {
+		pr_warn("failed to find fsl,imx6q-iomuxc-gpr regmap\n");
+	}
 }
 
 static void __init imx6q_init_machine(void)
@@ -212,15 +279,18 @@ static void __init imx6q_init_machine(void)
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
 
 	imx_anatop_init();
-	imx6q_pm_init();
+	cpu_is_imx6q() ?  imx6q_pm_init() : imx6dl_pm_init();
 	imx6q_1588_init();
+	imx6q_axi_init();
 }
 
 #define OCOTP_CFG3			0x440
 #define OCOTP_CFG3_SPEED_SHIFT		16
 #define OCOTP_CFG3_SPEED_1P2GHZ		0x3
+#define OCOTP_CFG3_SPEED_996MHZ		0x2
+#define OCOTP_CFG3_SPEED_852MHZ		0x1
 
-static void __init imx6q_opp_check_1p2ghz(struct device *cpu_dev)
+static void __init imx6q_opp_check_speed_grading(struct device *cpu_dev)
 {
 	struct device_node *np;
 	void __iomem *base;
@@ -238,11 +308,29 @@ static void __init imx6q_opp_check_1p2ghz(struct device *cpu_dev)
 		goto put_node;
 	}
 
+	/*
+	 * SPEED_GRADING[1:0] defines the max speed of ARM:
+	 * 2b'11: 1200000000Hz;
+	 * 2b'10: 996000000Hz;
+	 * 2b'01: 852000000Hz; -- i.MX6Q Only, exclusive with 996MHz.
+	 * 2b'00: 792000000Hz;
+	 * We need to set the max speed of ARM according to fuse map.
+	 */
 	val = readl_relaxed(base + OCOTP_CFG3);
 	val >>= OCOTP_CFG3_SPEED_SHIFT;
-	if ((val & 0x3) != OCOTP_CFG3_SPEED_1P2GHZ)
+	val &= 0x3;
+
+	if (val != OCOTP_CFG3_SPEED_1P2GHZ)
 		if (dev_pm_opp_disable(cpu_dev, 1200000000))
 			pr_warn("failed to disable 1.2 GHz OPP\n");
+	if (val < OCOTP_CFG3_SPEED_996MHZ)
+		if (dev_pm_opp_disable(cpu_dev, 996000000))
+			pr_warn("failed to disable 996 MHz OPP\n");
+	if (cpu_is_imx6q()) {
+		if (val != OCOTP_CFG3_SPEED_852MHZ)
+			if (dev_pm_opp_disable(cpu_dev, 852000000))
+				pr_warn("failed to disable 852 MHz OPP\n");
+	}
 
 put_node:
 	of_node_put(np);
@@ -268,7 +356,7 @@ static void __init imx6q_opp_init(void)
 		goto put_node;
 	}
 
-	imx6q_opp_check_1p2ghz(cpu_dev);
+	imx6q_opp_check_speed_grading(cpu_dev);
 
 put_node:
 	of_node_put(np);

arch/arm/mach-imx/mach-imx6sl.c

@@ -17,6 +17,7 @@
 #include <asm/mach/map.h>
 
 #include "common.h"
+#include "cpuidle.h"
 
 static void __init imx6sl_fec_init(void)
 {
@@ -39,6 +40,8 @@ static void __init imx6sl_init_late(void)
 	/* imx6sl reuses imx6q cpufreq driver */
 	if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ))
 		platform_device_register_simple("imx6q-cpufreq", -1, NULL, 0);
+
+	imx6sl_cpuidle_init();
 }
 
 static void __init imx6sl_init_machine(void)
@@ -55,8 +58,7 @@ static void __init imx6sl_init_machine(void)
 
 	imx6sl_fec_init();
 	imx_anatop_init();
-	/* Reuse imx6q pm code */
-	imx6q_pm_init();
+	imx6sl_pm_init();
 }
 
 static void __init imx6sl_init_irq(void)

arch/arm/mach-imx/time.c

@@ -25,6 +25,7 @@
 #include <linux/irq.h>
 #include <linux/clockchips.h>
 #include <linux/clk.h>
+#include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/sched_clock.h>
 
@@ -116,11 +117,22 @@ static u64 notrace mxc_read_sched_clock(void)
 	return sched_clock_reg ? __raw_readl(sched_clock_reg) : 0;
 }
 
+static struct delay_timer imx_delay_timer;
+
+static unsigned long imx_read_current_timer(void)
+{
+	return __raw_readl(sched_clock_reg);
+}
+
 static int __init mxc_clocksource_init(struct clk *timer_clk)
 {
 	unsigned int c = clk_get_rate(timer_clk);
 	void __iomem *reg = timer_base + (timer_is_v2() ? V2_TCN : MX1_2_TCN);
 
+	imx_delay_timer.read_current_timer = &imx_read_current_timer;
+	imx_delay_timer.freq = c;
+	register_current_timer_delay(&imx_delay_timer);
+
 	sched_clock_reg = reg;
 
 	sched_clock_register(mxc_read_sched_clock, 32, c);

arch/arm/mach-kirkwood/Kconfig

@@ -106,13 +106,6 @@ config ARCH_KIRKWOOD_DT
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell Kirkwood using flattened device tree.
 
-config MACH_MV88F6281GTW_GE_DT
-	bool "Marvell 88F6281 GTW GE Board (Flattened Device Tree)"
-	depends on ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell 88F6281 GTW GE Board (Flattened Device Tree).
-
 endmenu
 
 endif

arch/arm/mach-kirkwood/Makefile

-obj-y				+= common.o pcie.o
-obj-$(CONFIG_KIRKWOOD_LEGACY)	+= irq.o mpp.o
+obj-$(CONFIG_KIRKWOOD_LEGACY)	+= irq.o mpp.o common.o pcie.o
 obj-$(CONFIG_PM)		+= pm.o
 
 obj-$(CONFIG_MACH_D2NET_V2)		+= d2net_v2-setup.o lacie_v2-common.o
@@ -13,4 +12,3 @@ obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o tsx1x-common.o
 obj-$(CONFIG_MACH_TS41X)		+= ts41x-setup.o tsx1x-common.o
 
 obj-$(CONFIG_ARCH_KIRKWOOD_DT)		+= board-dt.o
-obj-$(CONFIG_MACH_MV88F6281GTW_GE_DT)	+= board-mv88f6281gtw_ge.o

arch/arm/mach-kirkwood/board-dt.c

@@ -19,11 +19,84 @@
 #include <linux/of_platform.h>
 #include <linux/dma-mapping.h>
 #include <linux/irqchip.h>
-#include <linux/kexec.h>
+#include <asm/hardware/cache-feroceon-l2.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/map.h>
 #include <mach/bridge-regs.h>
 #include <plat/common.h>
-#include "common.h"
+#include <plat/pcie.h>
+#include "pm.h"
+
+static struct map_desc kirkwood_io_desc[] __initdata = {
+	{
+		.virtual	= (unsigned long) KIRKWOOD_REGS_VIRT_BASE,
+		.pfn		= __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE),
+		.length		= KIRKWOOD_REGS_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+static void __init kirkwood_map_io(void)
+{
+	iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc));
+}
+
+static struct resource kirkwood_cpufreq_resources[] = {
+	[0] = {
+		.start  = CPU_CONTROL_PHYS,
+		.end    = CPU_CONTROL_PHYS + 3,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device kirkwood_cpufreq_device = {
+	.name		= "kirkwood-cpufreq",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(kirkwood_cpufreq_resources),
+	.resource	= kirkwood_cpufreq_resources,
+};
+
+static void __init kirkwood_cpufreq_init(void)
+{
+	platform_device_register(&kirkwood_cpufreq_device);
+}
+
+static struct resource kirkwood_cpuidle_resource[] = {
+	{
+		.flags	= IORESOURCE_MEM,
+		.start	= DDR_OPERATION_BASE,
+		.end	= DDR_OPERATION_BASE + 3,
+	},
+};
+
+static struct platform_device kirkwood_cpuidle = {
+	.name		= "kirkwood_cpuidle",
+	.id		= -1,
+	.resource	= kirkwood_cpuidle_resource,
+	.num_resources	= 1,
+};
+
+static void __init kirkwood_cpuidle_init(void)
+{
+	platform_device_register(&kirkwood_cpuidle);
+}
+
+/* Temporary here since mach-mvebu has a function we can use */
+static void kirkwood_restart(enum reboot_mode mode, const char *cmd)
+{
+	/*
+	 * Enable soft reset to assert RSTOUTn.
+	 */
+	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+	/*
+	 * Assert soft reset.
+	 */
+	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+	while (1)
+		;
+}
 
 #define MV643XX_ETH_MAC_ADDR_LOW	0x0414
 #define MV643XX_ETH_MAC_ADDR_HIGH	0x0418
@@ -104,35 +177,35 @@ static void __init kirkwood_dt_eth_fixup(void)
 	}
 }
 
-static void __init kirkwood_dt_init(void)
+/*
+ * Disable propagation of mbus errors to the CPU local bus, as this
+ * causes mbus errors (which can occur for example for PCI aborts) to
+ * throw CPU aborts, which we're not set up to deal with.
+ */
+static void __init kirkwood_disable_mbus_error_propagation(void)
 {
-	pr_info("Kirkwood: %s.\n", kirkwood_id());
+	void __iomem *cpu_config;
 
-	/*
-	 * Disable propagation of mbus errors to the CPU local bus,
-	 * as this causes mbus errors (which can occur for example
-	 * for PCI aborts) to throw CPU aborts, which we're not set
-	 * up to deal with.
-	 */
-	writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
+	cpu_config = ioremap(CPU_CONFIG_PHYS, 4);
+	writel(readl(cpu_config) & ~CPU_CONFIG_ERROR_PROP, cpu_config);
+	iounmap(cpu_config);
+}
 
-	BUG_ON(mvebu_mbus_dt_init());
+static void __init kirkwood_dt_init(void)
+{
+	kirkwood_disable_mbus_error_propagation();
 
-	kirkwood_l2_init();
+	BUG_ON(mvebu_mbus_dt_init());
 
+#ifdef CONFIG_CACHE_FEROCEON_L2
+	feroceon_of_init();
+#endif
 	kirkwood_cpufreq_init();
 	kirkwood_cpuidle_init();
 
 	kirkwood_pm_init();
 	kirkwood_dt_eth_fixup();
 
-#ifdef CONFIG_KEXEC
-	kexec_reinit = kirkwood_enable_pcie;
-#endif
-
-	if (of_machine_is_compatible("marvell,mv88f6281gtw-ge"))
-		mv88f6281gtw_ge_init();
-
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }