iio: imu: Add support for adis16475

Support ADIS16475 and similar IMU devices. These devices are
a precision, miniature MEMS inertial measurement unit (IMU) that
includes a triaxial gyroscope and a triaxial accelerometer. Each
inertial sensor combines with signal conditioning that optimizes
dynamic performance.

The driver adds support for the following devices:
* adis16470, adis16475, adis16477, adis16465, adis16467, adis16500,
  adis16505, adis16507.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

MAINTAINERS

@@ -1031,6 +1031,13 @@ W:	http://ez.analog.com/community/linux-device-drivers
 F:	Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
 F:	drivers/iio/imu/adis16460.c
 
+ANALOG DEVICES INC ADIS16475 DRIVER
+M:	Nuno Sa <nuno.sa@analog.com>
+L:	linux-iio@vger.kernel.org
+W:	http://ez.analog.com/community/linux-device-drivers
+S:	Supported
+F:	drivers/iio/imu/adis16475.c
+
 ANALOG DEVICES INC ADM1177 DRIVER
 M:	Beniamin Bia <beniamin.bia@analog.com>
 M:	Michael Hennerich <Michael.Hennerich@analog.com>

drivers/iio/imu/Kconfig

@@ -29,6 +29,19 @@ config ADIS16460
 	  To compile this driver as a module, choose M here: the module will be
 	  called adis16460.
 
+config ADIS16475
+	tristate "Analog Devices ADIS16475 and similar IMU driver"
+	depends on SPI
+	select IIO_ADIS_LIB
+	select IIO_ADIS_LIB_BUFFER if IIO_BUFFER
+	help
+	  Say yes here to build support for Analog Devices ADIS16470, ADIS16475,
+	  ADIS16477, ADIS16465, ADIS16467, ADIS16500, ADIS16505, ADIS16507 inertial
+	  sensors.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called adis16475.
+
 config ADIS16480
 	tristate "Analog Devices ADIS16480 and similar IMU driver"
 	depends on SPI

drivers/iio/imu/Makefile

@@ -6,6 +6,7 @@
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_ADIS16400) += adis16400.o
 obj-$(CONFIG_ADIS16460) += adis16460.o
+obj-$(CONFIG_ADIS16475) += adis16475.o
 obj-$(CONFIG_ADIS16480) += adis16480.o
 
 adis_lib-y += adis.o