This patch moves IRQ handler setup to the its corresponded IRQ
driver (AVIC, TZIC).
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

This flag is a NOOP and can be removed now.
Signed-off-by: Juan Solano <jsm@jsolano.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

These defconfigs contain the CONFIG_M25P80 symbol, which is now
dependent on the MTD_SPI_NOR symbol. Add CONFIG_MTD_SPI_NOR to satisfy
the new dependency.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

Last address for eMMa PrP is 0x80...0x83, so increase resource size
for eMMa to 256.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

The option COMMON_CLK_DEBUG was removed by commit ea72dc2c (clk: remove
CONFIG_COMMON_CLK_DEBUG), so let's remove CONFIG_COMMON_CLK_DEBUG from
the defconfig.
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

This patch removes clk_register_clkdev() for the clocks that do not
have any users for non-DT boards and drivers.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

This patch adds missing clocks handling for the Memory Stick Host
Controller (MSHC) and Run-Time Integrity Checker (RTIC).
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

The esai_ahb clock is derived from ahb and used to provide ESAI the
capability of register accessing and FSYS clock source for I2S clocks
dividing.  The gate bits of this esai_ahb clock are shared with the
esai clock -- the baud clock, so we need to call imx_clk_gate2_shared()
for these two clocks.
Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

It's quite common on i.MX that one gate bit controls the gating of
multiple clocks, i.e. this is a shared gate.  The patch adds the
function imx_clk_gate2_shared() for such case.  The clocks controlled
by the same gate bits should call this function with a pointer to a
single share count variable, so that the gate bits will only be
operated on the first enabling and the last disabling of these shared
gate clocks.

Thanks to Gerhard Sittig <gsi@denx.de> for this idea.
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

The imx specific clk_gate2 always has a valid lock with the clock.  So
the validation on gate->lock is not really needed.  Remove it.
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

The imx clk-gate2 driver implements an i.MX specific gate clock, which
has two bits controlling the gate states.  While this is a completely
separate gate driver from the common clk-gate one, it reuses the common
clk_gate structure.  Such reusing makes the extending of clk_gate2
clumsy.  Let's define struct clk_gate2 on our own to make the driver
independent of the common clk-gate one, and ease the clk_gate2 extending
at a later time.
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

CONFIG_OF is always selected for i.MX.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

Option CONFIG_LOCALVERSION_AUTO is quite helpful to tell kernel version.
I do not see any reason why we should unset it.  Let's remove the unset
to have it enabled.
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

Since 2501c917 (mmc: core: Use MMC_UNSAFE_RESUME as default behavior),
CONFIG_MMC_UNSAFE_RESUME is not available anymore.  Drop it from imx
defconfig.
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

Compared to i.MX6 Quad/Dual the CCM_CCGR1 register in the i.MX6 Solo/DualLite
replaces the ecspi5 clock with the i2c4 clock.

Handle this difference using cpu_is_imx6dl().
Signed-off-by: Iain Paton <ipaton0@gmail.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

 - Enable imx6 cpufreq support with ondemand governor
 - Enable CMA support so that device like 1080p HDMI can work
 - Run savedefconfig
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

The DRM_PANEL_SIMPLE is needed by the eukrea
mbimxsd51's displays.
Signed-off-by: Denis Carikli <denis@eukrea.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

Let CONFIG_CRYPTO_DEV_MXS_DCP driver to be built by default.

Generated by doing:

make mxs_defconfig
Manually selected the CONFIG_CRYPTO_DEV_MXS_DCP driver
make savedefconfig
cp defconfig arch/arm/configs/mxs_defconfig
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

Signed-off-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

The device tree version for the babbage board (imx51-babbage.dtb) has a more
complete support than the board file version, so remove the board file source
code.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

CODA7 clock lookups are now defined in the device tree.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

Signed-off-by: Denis Carikli <denis@eukrea.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

- Remove unused <asm/mach/time.h> inclusion.
- Use predefined constant for CS8900A base address.
- Use DEFINE_RES_MEM() macro for NOR flash resource.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

Instead of using init() and exit() hooks from framebuffer driver
to control power of LCD, introduce fixed voltage regulator for
this purpose.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

Add choice for low-level debug UART. Similar to i.MX6, there is a
numeric configuration, valid choices are 0 to 3.
Note that the kernel assumes that the boot loader initialized clock
properly.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

This patch replaces direct handling of peripheral bits with GPIOs by
using basic-mmio-gpio driver. As a result this change eliminate some
low-level code and removes custom io_map() from the board.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

The asm-generic, big-endian version of zero_bytemask creates a mask of
bytes preceding the first zero-byte by left shifting ~0ul based on the
position of the first zero byte.

Unfortunately, if the first (top) byte is zero, the output of
prep_zero_mask has only the top bit set, resulting in undefined C
behaviour as we shift left by an amount equal to the width of the type.
As it happens, GCC doesn't manage to spot this through the call to fls(),
but the issue remains if architectures choose to implement their shift
instructions differently.

An example would be arch/arm/ (AArch32), where LSL Rd, Rn, #32 results
in Rd == 0x0, whilst on arch/arm64 (AArch64) LSL Xd, Xn, #64 results in
Xd == Xn.

Rather than check explicitly for the problematic shift, this patch adds
an extra shift by 1, replacing fls with __fls. Since zero_bytemask is
never called with a zero argument (has_zero() is used to check the data
first), we don't need to worry about calling __fls(0), which is
undefined.

Cc: <stable@vger.kernel.org>
Cc: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This merges the patch to fix possible loss of dirty bit on munmap() or
madvice(DONTNEED).  If there are concurrent writers on other CPU's that
have the unmapped/unneeded page in their TLBs, their writes to the page
could possibly get lost if a third CPU raced with the TLB flush and did
a page_mkclean() before the page was fully written.

Admittedly, if you unmap() or madvice(DONTNEED) an area _while_ another
thread is still busy writing to it, you deserve all the lost writes you
could get.  But we kernel people hold ourselves to higher quality
standards than "crazy people deserve to lose", because, well, we've seen
people do all kinds of crazy things.

So let's get it right, just because we can, and we don't have to worry
about it.

* safe-dirty-tlb-flush:
  mm: split 'tlb_flush_mmu()' into tlb flushing and memory freeing parts

Pull btrfs fixes from Chris Mason.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: limit the path size in send to PATH_MAX
  Btrfs: correctly set profile flags on seqlock retry
  Btrfs: use correct key when repeating search for extent item
  Btrfs: fix inode caching vs tree log
  Btrfs: fix possible memory leaks in open_ctree()
  Btrfs: avoid triggering bug_on() when we fail to start inode caching task
  Btrfs: move btrfs_{set,clear}_and_info() to ctree.h
  btrfs: replace error code from btrfs_drop_extents
  btrfs: Change the hole range to a more accurate value.
  btrfs: fix use-after-free in mount_subvol()

Pull arm fixes from Russell King:
 "A number of fixes for the PJ4/iwmmxt changes which arm-soc forced me
  to take during the merge window.  This stuff should have been better
  tested and sorted out *before* the merge window"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8042/1: iwmmxt: allow to build iWMMXt on Marvell PJ4B
  ARM: 8041/1: pj4: fix cpu_is_pj4 check
  ARM: 8040/1: pj4: properly detect existence of iWMMXt coprocessor
  ARM: 8039/1: pj4: enable iWMMXt only if CONFIG_IWMMXT is set
  ARM: 8038/1: iwmmxt: explicitly check for supported architectures

Pull arm64 fixes from Catalin Marinas:
 - compat renameat2 syscall wiring and __NR_compat_syscalls fix
 - TLB fix for transparent huge pages following switch to generic
   mmu_gather
 - spinlock initialisation for init_mm's context
 - move of_clk_init() earlier
 - Kconfig duplicate entry fix

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: init: Move of_clk_init to time_init
  arm64: initialize spinlock for init_mm's context
  arm64: debug: remove noisy, pointless warning
  arm64: mm: Add THP TLB entries to general mmu_gather
  arm64: add renameat2 compat syscall
  ARM64: Remove duplicated Kconfig entry for "kernel/power/Kconfig"
  arm64: __NR_compat_syscalls fix

Pull irq fixes from Thomas Gleixner:
 "A slighlty large fix for a subtle issue in the CPU hotplug code of
  certain ARM SoCs, where the not yet online cpu needs to setup the cpu
  local timer and needs to set the interrupt affinity to itself.
  Setting interrupt affinity to a not online cpu is prohibited and
  therefor the timer interrupt ends up on the wrong cpu, which leads to
  nasty complications.

  The SoC folks tried to hack around that in the SoC code in some more
  than nasty ways.  The proper solution is to have a way to enforce the
  affinity setting to a not online cpu.  The core patch to the genirq
  code provides that facility and the follow up patches make use of it
  in the GIC interrupt controller and the exynos timer driver.

  The change to the core code has no implications to existing users,
  except for the rename of the locked function and therefor the
  necessary fixup in mips/cavium.  Aside of that, no runtime impact is
  possible, as none of the existing interrupt chips implements anything
  which depends on the force argument of the irq_set_affinity()
  callback"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource: Exynos_mct: Register clock event after request_irq()
  clocksource: Exynos_mct: Use irq_force_affinity() in cpu bringup
  irqchip: Gic: Support forced affinity setting
  genirq: Allow forcing cpu affinity of interrupts

Pull tty/serial fixes from Greg KH:
 "Here are a few tty/serial fixes for 3.15-rc3 that resolve a number of
  reported issues in the 8250 and samsung serial drivers, as well as a
  character loss fix for the tty core that was caused by the lock
  removal patches a release ago"

* tag 'tty-3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial_core: fix uart PORT_UNKNOWN handling
  serial: samsung: Change barrier() to cpu_relax() in console output
  serial: samsung: don't check config for every character
  serial: samsung: Use the passed in "port", fixing kgdb w/ no console
  serial: 8250: Fix thread unsafe __dma_tx_complete function
  8250_core: Fix unwanted TX chars write
  tty: Fix race condition between __tty_buffer_request_room and flush_to_ldisc

Pull staging / IIO driver fixes from Greg KH:
 "Here are some small staging and IIO driver fixes for 3.15-rc3.

  Nothing major at all, just some assorted issues that people have
  reported"

* tag 'staging-3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: comedi: usbdux: bug fix for accessing 'ao_chanlist' in private data
  iio: adc: mxs-lradc: fix warning when buidling on avr32
  iio: cm36651: Fix i2c client leak and possible NULL pointer dereference
  iio: querying buffer scan_mask should return 0/1
  staging:iio:ad2s1200 fix a missing break
  iio: adc: at91_adc: correct default shtim value
  ARM: at91: at91sam9260: change at91_adc name
  ARM: at91: at91sam9g45: change at91_adc name
  iio: cm32181: Fix read integration time function
  iio: adc: at91_adc: Repair broken platform_data support

Merge tag 'driver-core-3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
 "Here are some kernfs fixes for 3.15-rc3 that resolve some reported
  problems.  Nothing huge, but all needed"

* tag 'driver-core-3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  s390/ccwgroup: Fix memory corruption
  kernfs: add back missing error check in kernfs_fop_mmap()
  kernfs: fix a subdir count leak

Pull USB fixes from Greg KH:
 "Here are a number of USB fixes for 3.15-rc3.  The majority are gadget
  fixes, as we didn't get any of those in for 3.15-rc2.  The others are
  all over the place, and there's a number of new device id addtions as
  well."

* tag 'usb-3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (35 commits)
  usb: option: add and update a number of CMOTech devices
  usb: option: add Alcatel L800MA
  usb: option: add Olivetti Olicard 500
  usb: qcserial: add Sierra Wireless MC7305/MC7355
  usb: qcserial: add Sierra Wireless MC73xx
  usb: qcserial: add Sierra Wireless EM7355
  USB: io_ti: fix firmware download on big-endian machines
  usb/xhci: fix compilation warning when !CONFIG_PCI && !CONFIG_PM
  xhci: extend quirk for Renesas cards
  xhci: Switch Intel Lynx Point ports to EHCI on shutdown.
  usb: xhci: Prefer endpoint context dequeue pointer over stopped_trb
  phy: core: make NULL a valid phy reference if !CONFIG_GENERIC_PHY
  phy: fix kernel oops in phy_lookup()
  phy: restore OMAP_CONTROL_PHY dependencies
  phy: exynos: fix building as a module
  USB: serial: fix sysfs-attribute removal deadlock
  usb: wusbcore: fix panic in wusbhc_chid_set
  usb: wusbcore: convert nested lock to use spin_lock instead of spin_lock_irq
  uwb: don't call spin_unlock_irq in a USB completion handler
  usb: chipidea: coordinate usb phy initialization for different phy type
  ...

Pull ACPI and power management fixes from Rafael Wysocki:
 "These include a fix for a recent ACPI regression related to device
  notifications, intel_idle fix related to IvyTown support, fix for a
  buffer size issue in ACPICA, PM core fix related to the "freeze" sleep
  state, four fixes for various types of breakage in cpufreq drivers, a
  PNP workaround for a wrong memory region size in ACPI tables, and a
  fix and cleanup for the ACPI tools Makefile.

  Specifics:

   - Fix for broken ACPI notifications on some systems caused by a
     recent ACPI hotplug commit that blocked the propagation of unknown
     type notifications to device drivers inadvertently.

   - intel_idle fix to make the IvyTown C-states handling (added
     recently) work as intended which now is broken due to missing
     braces.  From Christoph Jaeger.

   - ACPICA fix to make it allocate buffers of the right sizes for the
     Generic Serial Bus operation region access.  From Lv Zheng.

   - PM core fix unblocking cpuidle before entering the "freeze" sleep
     state which causes that state to be able to actually save more
     energy than runtime idle.

   - Configuration and build fixes for the highbank and powernv cpufreq
     drivers from Kefeng Wang and Srivatsa S Bhat.

   - Coccinelle warning fix related to error pointers for the unicore32
     cpufreq driver from Duan Jiong.

   - Integer overflow fix for the ppc-corenet cpufreq driver from Geert
     Uytterhoeven.

   - Workaround for BIOSes that don't report the entire Intel MCH area
     in their ACPI tables from Bjorn Helgaas.

   - ACPI tools Makefile fix and cleanup from Thomas Renninger"

* tag 'pm+acpi-3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / notify: Do not block unknown type notifications in root handler
  PNP: Work around BIOS defects in Intel MCH area reporting
  cpufreq: highbank: fix ARM_HIGHBANK_CPUFREQ dependency warning
  cpufreq: ppc: Fix integer overflow in expression
  cpufreq, powernv: Fix build failure on UP
  cpufreq: unicore32: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO
  PM / suspend: Make cpuidle work in the "freeze" state
  intel_idle: fix IVT idle state table setting
  ACPICA: Fix buffer allocation issue for generic_serial_bus region accesses.
  tools/power/acpi: Minor bugfixes

fs_path_ensure_buf is used to make sure our path buffers for
send are big enough for the path names as we construct them.
The buffer size is limited to 32K by the length field in
the struct.

But bugs in the path construction can end up trying to build
a huge buffer, and we'll do invalid memmmoves when the
buffer length field wraps.

This patch is step one, preventing the overflows.
Signed-off-by: Chris Mason <clm@fb.com>

The mmu-gather operation 'tlb_flush_mmu()' has done two things: the
actual tlb flush operation, and the batched freeing of the pages that
the TLB entries pointed at.

This splits the operation into separate phases, so that the forced
batched flushing done by zap_pte_range() can now do the actual TLB flush
while still holding the page table lock, but delay the batched freeing
of all the pages to after the lock has been dropped.

This in turn allows us to avoid a race condition between
set_page_dirty() (as called by zap_pte_range() when it finds a dirty
shared memory pte) and page_mkclean(): because we now flush all the
dirty page data from the TLB's while holding the pte lock,
page_mkclean() will be held up walking the (recently cleaned) page
tables until after the TLB entries have been flushed from all CPU's.
Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Tested-by: Dave Hansen <dave.hansen@intel.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King - ARM Linux <linux@arm.linux.org.uk>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>