- 04 Mar, 2016 13 commits
-
-
Takashi Iwai authored
commit 24db8bba upstream. The kernel memory allocators already report the errors when the requested allocation fails, thus we don't need to warn it again in each caller side. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Hannes Reinecke authored
commit 2d99b55d upstream. Commit 35dc2483 introduced a check for current->mm to see if we have a user space context and only copies data if we do. Now if an IO gets interrupted by a signal data isn't copied into user space any more (as we don't have a user space context) but user space isn't notified about it. This patch modifies the behaviour to return -EINTR from bio_uncopy_user() to notify userland that a signal has interrupted the syscall, otherwise it could lead to a situation where the caller may get a buffer with no data returned. This can be reproduced by issuing SG_IO ioctl()s in one thread while constantly sending signals to it. Fixes: 35dc2483 [SCSI] sg: Fix user memory corruption when SG_IO is interrupted by a signal Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
Jens Axboe <axboe@fb.com> [ luis: backported to 3.16: based on Johannes' backport to 3.14 ] Signed-off-by:
-
Eryu Guan authored
commit bcff2488 upstream. I notice ext4/307 fails occasionally on ppc64 host, reporting md5 checksum mismatch after moving data from original file to donor file. The reason is that move_extent_per_page() calls __block_write_begin() and block_commit_write() to write saved data from original inode blocks to donor inode blocks, but __block_write_begin() not only maps buffer heads but also reads block content from disk if the size is not block size aligned. At this time the physical block number in mapped buffer head is pointing to the donor file not the original file, and that results in reading wrong data to page, which get written to disk in following block_commit_write call. This also can be reproduced by the following script on 1k block size ext4 on x86_64 host: mnt=/mnt/ext4 donorfile=$mnt/donor testfile=$mnt/testfile e4compact=~/xfstests/src/e4compact rm -f $donorfile $testfile # reserve space for donor file, written by 0xaa and sync to disk to # avoid EBUSY on EXT4_IOC_MOVE_EXT xfs_io -fc "pwrite -S 0xaa 0 1m" -c "fsync" $donorfile # create test file written by 0xbb xfs_io -fc "pwrite -S 0xbb 0 1023" -c "fsync" $testfile # compute initial md5sum md5sum $testfile | tee md5sum.txt # drop cache, force e4compact to read data from disk echo 3 > /proc/sys/vm/drop_caches # test defrag echo "$testfile" | $e4compact -i -v -f $donorfile # check md5sum md5sum -c md5sum.txt Fix it by creating & mapping buffer heads only but not reading blocks from disk, because all the data in page is guaranteed to be up-to-date in mext_page_mkuptodate(). Signed-off-by:
Eryu Guan <guaneryu@gmail.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Insu Yun authored
commit 46901760 upstream. Since sizeof(ext_new_group_data) > sizeof(ext_new_flex_group_data), integer overflow could be happened. Therefore, need to fix integer overflow sanitization. Signed-off-by:
Insu Yun <wuninsu@gmail.com> Signed-off-by:
-
James Bottomley authored
commit 90a88d6e upstream. This softlockup is currently happening: [ 444.088002] NMI watchdog: BUG: soft lockup - CPU#1 stuck for 22s! [kworker/1:1:29] [ 444.088002] Modules linked in: lpfc(-) qla2x00tgt(O) qla2xxx_scst(O) scst_vdisk(O) scsi_transport_fc libcrc32c scst(O) dlm configfs nfsd lockd grace nfs_acl auth_rpcgss sunrpc ed d snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device dm_mod iTCO_wdt snd_hda_codec_realtek snd_hda_codec_generic gpio_ich iTCO_vendor_support ppdev snd_hda_intel snd_hda_codec snd_hda _core snd_hwdep tg3 snd_pcm snd_timer libphy lpc_ich parport_pc ptp acpi_cpufreq snd pps_core fjes parport i2c_i801 ehci_pci tpm_tis tpm sr_mod cdrom soundcore floppy hwmon sg 8250_ fintek pcspkr i915 drm_kms_helper uhci_hcd ehci_hcd drm fb_sys_fops sysimgblt sysfillrect syscopyarea i2c_algo_bit usbcore button video usb_common fan ata_generic ata_piix libata th ermal [ 444.088002] CPU: 1 PID: 29 Comm: kworker/1:1 Tainted: G O 4.4.0-rc5-2.g1e923a3-default #1 [ 444.088002] Hardware name: FUJITSU SIEMENS ESPRIMO E /D2164-A1, BIOS 5.00 R1.10.2164.A1 05/08/2006 [ 444.088002] Workqueue: fc_wq_4 fc_rport_final_delete [scsi_transport_fc] [ 444.088002] task: f6266ec0 ti: f6268000 task.ti: f6268000 [ 444.088002] EIP: 0060:[<c07e7044>] EFLAGS: 00000286 CPU: 1 [ 444.088002] EIP is at _raw_spin_unlock_irqrestore+0x14/0x20 [ 444.088002] EAX: 00000286 EBX: f20d3800 ECX: 00000002 EDX: 00000286 [ 444.088002] ESI: f50ba800 EDI: f2146848 EBP: f6269ec8 ESP: f6269ec8 [ 444.088002] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 444.088002] CR0: 8005003b CR2: 08f96600 CR3: 363ae000 CR4: 000006d0 [ 444.088002] Stack: [ 444.088002] f6269eec c066b0f7 00000286 f2146848 f50ba808 f50ba800 f50ba800 f2146a90 [ 444.088002] f2146848 f6269f08 f8f0a4ed f3141000 f2146800 f2146a90 f619fa00 00000040 [ 444.088002] f6269f40 c026cb25 00000001 166c6392 00000061 f6757140 f6136340 00000004 [ 444.088002] Call Trace: [ 444.088002] [<c066b0f7>] scsi_remove_target+0x167/0x1c0 [ 444.088002] [<f8f0a4ed>] fc_rport_final_delete+0x9d/0x1e0 [scsi_transport_fc] [ 444.088002] [<c026cb25>] process_one_work+0x155/0x3e0 [ 444.088002] [<c026cde7>] worker_thread+0x37/0x490 [ 444.088002] [<c027214b>] kthread+0x9b/0xb0 [ 444.088002] [<c07e72c1>] ret_from_kernel_thread+0x21/0x40 What appears to be happening is that something has pinned the target so it can't go into STARGET_DEL via final release and the loop in scsi_remove_target spins endlessly until that happens. The fix for this soft lockup is to not keep looping over a device that we've called remove on but which hasn't gone into DEL state. This patch will retain a simplistic memory of the last target and not keep looping over it. Reported-by:
Sebastian Herbszt <herbszt@gmx.de> Tested-by:
James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by:
-
Stefan Haberland authored
commit 9d862aba upstream. Add refcount to the DASD device when a summary unit check worker is scheduled. This prevents that the device is set offline with worker in place. Signed-off-by:
Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Stefan Haberland authored
commit 020bf042 upstream. The channel checks the specified length and the provided amount of data for CCWs and provides an incorrect length error if the size does not match. Under z/VM with simulation activated the length may get changed. Having the suppress length indication bit set is stated as good CCW coding practice and avoids errors under z/VM. Signed-off-by:
-
Anton Protopopov authored
commit 4b550af5 upstream. The setup_ntlmv2_rsp() function may return positive value ENOMEM instead of -ENOMEM in case of kmalloc failure. Signed-off-by:
Anton Protopopov <a.s.protopopov@gmail.com> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Rasmus Villemoes authored
commit ed3f9fd1 upstream. This fails to undo the setup for pin==0; moreover, something interesting happens if the setup failed already at pin==0. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Fixes: f899fc64 ("drm/i915: use GMBUS to manage i2c links") Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1455048677-19882-3-git-send-email-linux@rasmusvillemoes.dk (cherry picked from commit 2417c8c0) Signed-off-by:
-
Andreas Schwab authored
commit f15838e9 upstream. Since binutils 2.26 BFD is doing suffix merging on STRTAB sections. But dedotify modifies the symbol names in place, which can also modify unrelated symbols with a name that matches a suffix of a dotted name. To remove the leading dot of a symbol name we can just increment the pointer into the STRTAB section instead. Backport to all stables to avoid breakage when people update their binutils - mpe. Signed-off-by:
Andreas Schwab <schwab@linux-m68k.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Jani Nikula authored
commit 26f6f2d3 upstream. Since sequence block v2 the second byte contains flags other than just pull up/down. Don't pass arbitrary data to the sideband interface. The rest may or may not work for sequence block v2, but there should be no harm done. Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Jani Nikula authored
commit 4db3a244 upstream. Do not blindly trust the VBT data used for indexing. Reviewed-by:
-
CQ Tang authored
commit fda3bec1 upstream. This is a 32-bit register. Apparently harmless on real hardware, but causing justified warnings in simulation. Signed-off-by:
CQ Tang <cq.tang@intel.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> Signed-off-by:
-
- 03 Mar, 2016 1 commit
-
-
Luis Henriques authored
This reverts commit 0f7b4f79, which was commit ff4319dc upstream. This commit introduced a regression in this kernel. Commit 95be58df ("firmware: dmi_scan: Use full dmi version for SMBIOS3") added support for SMBIOS3. However, this was not backport to this kernel version, and thus commit ff4319dc should have not been applied. BugLink: https://bugs.launchpad.net/bugs/1551419Signed-off-by:
-
- 02 Mar, 2016 1 commit
-
-
Luis Henriques authored
Signed-off-by:
-
- 29 Feb, 2016 2 commits
-
-
Florian Fainelli authored
commit d5c3d846 upstream. Commit 2c7b4921 ("phy: fix the use of PHY_IGNORE_INTERRUPT") changed a hunk in phy_state_machine() in the PHY_RUNNING case which was not needed. The change essentially makes the PHY library treat PHY devices with PHY_IGNORE_INTERRUPT to keep polling for the PHY device, even though the intent is not to do it. Fix this by reverting that specific hunk, which makes the PHY state machine wait for state changes, and stay in the PHY_RUNNING state for as long as needed. Fixes: 2c7b4921 ("phy: fix the use of PHY_IGNORE_INTERRUPT") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Shaohui Xie authored
commit 11e122cb upstream. Currently, if phy state is PHY_RUNNING, we always register a CHANGE when phy works in polling or interrupt ignored, this will make the adjust_link being called even the phy link did Not changed. checking the phy link to make sure the link did changed before we register a CHANGE, if link did not changed, we do nothing. Signed-off-by:
Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by:
-
- 25 Feb, 2016 23 commits
-
-
Thomas Hellstrom authored
commit 12617971 upstream. A regression introduced when the master ttm lock was split into two. Reported-and-tested-by:
Brian Paul <brianp@vmware.com> Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
-
Willy Tarreau authored
commit 759c0114 upstream. On no-so-small systems, it is possible for a single process to cause an OOM condition by filling large pipes with data that are never read. A typical process filling 4000 pipes with 1 MB of data will use 4 GB of memory. On small systems it may be tricky to set the pipe max size to prevent this from happening. This patch makes it possible to enforce a per-user soft limit above which new pipes will be limited to a single page, effectively limiting them to 4 kB each, as well as a hard limit above which no new pipes may be created for this user. This has the effect of protecting the system against memory abuse without hurting other users, and still allowing pipes to work correctly though with less data at once. The limit are controlled by two new sysctls : pipe-user-pages-soft, and pipe-user-pages-hard. Both may be disabled by setting them to zero. The default soft limit allows the default number of FDs per process (1024) to create pipes of the default size (64kB), thus reaching a limit of 64MB before starting to create only smaller pipes. With 256 processes limited to 1024 FDs each, this results in 1024*64kB + (256*1024 - 1024) * 4kB = 1084 MB of memory allocated for a user. The hard limit is disabled by default to avoid breaking existing applications that make intensive use of pipes (eg: for splicing). Reported-by: socketpair@gmail.com Reported-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Mitigates: CVE-2013-4312 (Linux 2.0+) Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Leon Romanovsky authored
commit 75c1657e upstream. Fix the RC QPs send queue overhead computation to take into account two additional segments in the WQE which are needed for registration operations. The ATOMIC and UMR segments can't coexist together, so chose maximum out of them. The commit 9e65dc37 ("IB/mlx5: Fix RC transport send queue overhead computation") was intended to update RC transport as commit messages states, but added the code to UC transport. Fixes: 9e65dc37 ("IB/mlx5: Fix RC transport send queue overhead computation") Signed-off-by:
Kamal Heib <kamalh@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Reviewed-by:
Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Xin Long authored
commit 7a84bd46 upstream. Commit ed5a377d ("sctp: translate host order to network order when setting a hmacid") corrected the hmacid byte-order when setting a hmacid. but the same issue also exists on getting a hmacid. We fix it by changing hmacids to host order when users get them with getsockopt. Fixes: Commit ed5a377d ("sctp: translate host order to network order when setting a hmacid") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Eric Dumazet authored
commit 44c3d0c1 upstream. Silence lockdep false positive about rcu_dereference() being used in the wrong context. First one should use rcu_dereference_protected() as we own the spinlock. Second one should be a normal assignation, as no barrier is needed. Fixes: 18367681 ("ipv6 flowlabel: Convert np->ipv6_fl_list to RCU.") Reported-by:
Dave Jones <davej@codemonkey.org.uk> Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Hannes Frederic Sowa authored
commit 415e3d3e upstream. The commit referenced in the Fixes tag incorrectly accounted the number of in-flight fds over a unix domain socket to the original opener of the file-descriptor. This allows another process to arbitrary deplete the original file-openers resource limit for the maximum of open files. Instead the sending processes and its struct cred should be credited. To do so, we add a reference counted struct user_struct pointer to the scm_fp_list and use it to account for the number of inflight unix fds. Fixes: 712f4aad ("unix: properly account for FDs passed over unix sockets") Reported-by:
David Herrmann <dh.herrmann@gmail.com> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Linus Torvalds <torvalds@linux-foundation.org> Suggested-by:
-
Ken-ichirou MATSUZAWA authored
commit aa3a0220 upstream. We should not trim skb for mmaped socket since its buf size is fixed and userspace will read as frame which data equals head. mmaped socket will not call recvmsg, means max_recvmsg_len is 0, skb_reserve was not called before commit: db65a3aa. Fixes: db65a3aa (netlink: Trim skb to alloc size to avoid MSG_TRUNC) Signed-off-by:
Ken-ichirou MATSUZAWA <chamas@h4.dion.ne.jp> Signed-off-by:
-
Marcelo Ricardo Leitner authored
commit 27f7ed2b upstream. This patch extends commit b93d6471 ("sctp: implement the sender side for SACK-IMMEDIATELY extension") as it didn't white list SCTP_SACK_IMMEDIATELY on sctp_msghdr_parse(), causing it to be understood as an invalid flag and returning -EINVAL to the application. Note that the actual handling of the flag is already there in sctp_datamsg_from_user(). https://tools.ietf.org/html/rfc7053#section-7 Fixes: b93d6471 ("sctp: implement the sender side for SACK-IMMEDIATELY extension") Signed-off-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
-
Hannes Frederic Sowa authored
commit 9a368aff upstream. Several times already this has been reported as kasan reports caused by syzkaller and trinity and people always looked at RCU races, but it is much more simple. :) In case we bind a pptp socket multiple times, we simply add it to the callid_sock list but don't remove the old binding. Thus the old socket stays in the bucket with unused call_id indexes and doesn't get cleaned up. This causes various forms of kasan reports which were hard to pinpoint. Simply don't allow multiple binds and correct error handling in pptp_bind. Also keep sk_state bits in place in pptp_connect. Fixes: 00959ade ("PPTP: PPP over IPv4 (Point-to-Point Tunneling Protocol)") Cc: Dmitry Kozlov <xeb@mail.ru> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Dmitry Vyukov <dvyukov@google.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Dave Jones <davej@codemonkey.org.uk> Reported-by:
-
Eric Dumazet authored
commit fa0dc04d upstream. Dmitry reported a struct pid leak detected by a syzkaller program. Bug happens in unix_stream_recvmsg() when we break the loop when a signal is pending, without properly releasing scm. Fixes: b3ca9b02 ("net: fix multithreaded signal handling in unix recv routines") Reported-by:
-
Florian Fainelli authored
commit deccd16f upstream. Commit 5ea94e76 ("phy: add phy_mac_interrupt()") to use with PHY_IGNORE_INTERRUPT added a cancel_work_sync() into phy_mac_interrupt() which is allowed to sleep, whereas phy_mac_interrupt() is expected to be callable from interrupt context. Now that we have fixed how the PHY state machine treats PHY_IGNORE_INTERRUPT with respect to state changes, we can just set the new link state, and queue the PHY state machine for execution so it is going to read the new link state. For that to work properly, we need to update phy_change() not to try to invoke any interrupt callbacks if we have configured the PHY device for PHY_IGNORE_INTERRUPT, because that PHY device and its driver are not required to implement those. Fixes: 5ea94e76 ("phy: add phy_mac_interrupt() to use with PHY_IGNORE_INTERRUPT") Signed-off-by:
-
David Sterba authored
commit bc4ef759 upstream. The value of ctx->pos in the last readdir call is supposed to be set to INT_MAX due to 32bit compatibility, unless 'pos' is intentially set to a larger value, then it's LLONG_MAX. There's a report from PaX SIZE_OVERFLOW plugin that "ctx->pos++" overflows (https://forums.grsecurity.net/viewtopic.php?f=1&t=4284), on a 64bit arch, where the value is 0x7fffffffffffffff ie. LLONG_MAX before the increment. We can get to that situation like that: * emit all regular readdir entries * still in the same call to readdir, bump the last pos to INT_MAX * next call to readdir will not emit any entries, but will reach the bump code again, finds pos to be INT_MAX and sets it to LLONG_MAX Normally this is not a problem, but if we call readdir again, we'll find 'pos' set to LLONG_MAX and the unconditional increment will overflow. The report from Victor at (http://thread.gmane.org/gmane.comp.file-systems.btrfs/49500) with debugging print shows that pattern: Overflow: e Overflow: 7fffffff Overflow: 7fffffffffffffff PAX: size overflow detected in function btrfs_real_readdir fs/btrfs/inode.c:5760 cicus.935_282 max, count: 9, decl: pos; num: 0; context: dir_context; CPU: 0 PID: 2630 Comm: polkitd Not tainted 4.2.3-grsec #1 Hardware name: Gigabyte Technology Co., Ltd. H81ND2H/H81ND2H, BIOS F3 08/11/2015 ffffffff81901608 0000000000000000 ffffffff819015e6 ffffc90004973d48 ffffffff81742f0f 0000000000000007 ffffffff81901608 ffffc90004973d78 ffffffff811cb706 0000000000000000 ffff8800d47359e0 ffffc90004973ed8 Call Trace: [<ffffffff81742f0f>] dump_stack+0x4c/0x7f [<ffffffff811cb706>] report_size_overflow+0x36/0x40 [<ffffffff812ef0bc>] btrfs_real_readdir+0x69c/0x6d0 [<ffffffff811dafc8>] iterate_dir+0xa8/0x150 [<ffffffff811e6d8d>] ? __fget_light+0x2d/0x70 [<ffffffff811dba3a>] SyS_getdents+0xba/0x1c0 Overflow: 1a [<ffffffff811db070>] ? iterate_dir+0x150/0x150 [<ffffffff81749b69>] entry_SYSCALL_64_fastpath+0x12/0x83 The jump from 7fffffff to 7fffffffffffffff happens when new dir entries are not yet synced and are processed from the delayed list. Then the code could go to the bump section again even though it might not emit any new dir entries from the delayed list. The fix avoids entering the "bump" section again once we've finished emitting the entries, both for synced and delayed entries. References: https://forums.grsecurity.net/viewtopic.php?f=1&t=4284Reported-by:
Victor <services@swwu.com> Signed-off-by:
David Sterba <dsterba@suse.com> Tested-by:
Holger Hoffstätte <holger.hoffstaette@googlemail.com> Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
Linus Walleij authored
commit e972c374 upstream. Since the dawn of time the ICST code has only supported divide by one or hang in an eternal loop. Luckily we were always dividing by one because the reference frequency for the systems using the ICSTs is 24MHz and the [min,max] values for the PLL input if [10,320] MHz for ICST307 and [6,200] for ICST525, so the loop will always terminate immediately without assigning any divisor for the reference frequency. But for the code to make sense, let's insert the missing i++ Reported-by:
David Binderman <dcb314@hotmail.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Nicolai Hähnle authored
commit f6ff4f67 upstream. An arbitrary amount of time can pass between spin_unlock and radeon_fence_wait_any, so we need to ensure that nobody frees the fences from under us. Based on the analogous fix for amdgpu. Signed-off-by:
Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Tejun Heo authored
commit d6e022f1 upstream. When looking up the pool_workqueue to use for an unbound workqueue, workqueue assumes that the target CPU is always bound to a valid NUMA node. However, currently, when a CPU goes offline, the mapping is destroyed and cpu_to_node() returns NUMA_NO_NODE. This has always been broken but hasn't triggered often enough before 874bbfe6 ("workqueue: make sure delayed work run in local cpu"). After the commit, workqueue forcifully assigns the local CPU for delayed work items without explicit target CPU to fix a different issue. This widens the window where CPU can go offline while a delayed work item is pending causing delayed work items dispatched with target CPU set to an already offlined CPU. The resulting NUMA_NO_NODE mapping makes workqueue try to queue the work item on a NULL pool_workqueue and thus crash. While 874bbfe6 has been reverted for a different reason making the bug less visible again, it can still happen. Fix it by mapping NUMA_NO_NODE to the default pool_workqueue from unbound_pwq_by_node(). This is a temporary workaround. The long term solution is keeping CPU -> NODE mapping stable across CPU off/online cycles which is being worked on. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Mike Galbraith <umgwanakikbuti@gmail.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Len Brown <len.brown@intel.com> Link: http://lkml.kernel.org/g/1454424264.11183.46.camel@gmail.com Link: http://lkml.kernel.org/g/1453702100-2597-1-git-send-email-tangchen@cn.fujitsu.com [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Alexandra Yates authored
commit 342decff upstream. Adding Intel codename DNV platform device IDs for SATA. Signed-off-by:
Alexandra Yates <alexandra.yates@linux.intel.com> Signed-off-by:
-
Tony Lindgren authored
commit b241d31e upstream. Otherwise rmmod omap2430; rmmod phy-twl4030-usb; modprobe omap2430 will try to use a non-existing phy and oops: Unable to handle kernel paging request at virtual address b6f7c1f0 ... [<c048a284>] (devm_usb_get_phy_by_node) from [<bf0758ac>] (omap2430_musb_init+0x44/0x2b4 [omap2430]) [<bf0758ac>] (omap2430_musb_init [omap2430]) from [<bf055ec0>] (musb_init_controller+0x194/0x878 [musb_hdrc]) Cc: Bin Liu <b-liu@ti.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: NeilBrown <neil@brown.name> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
-
Takashi Iwai authored
commit 4dff5c7b upstream. snd_timer_user_read() has a potential race among parallel reads, as qhead and qused are updated outside the critical section due to copy_to_user() calls. Move them into the critical section, and also sanitize the relevant code a bit. Signed-off-by:
-
Takashi Iwai authored
commit ed8b1d6d upstream. A slave timer element also unlinks at snd_timer_stop() but it takes only slave_active_lock. When a slave is assigned to a master, however, this may become a race against the master's interrupt handling, eventually resulting in a list corruption. The actual bug could be seen with a syzkaller fuzzer test case in BugLink below. As a fix, we need to take timeri->timer->lock when timer isn't NULL, i.e. assigned to a master, while the assignment to a master itself is protected by slave_active_lock. BugLink: http://lkml.kernel.org/r/CACT4Y+Y_Bm+7epAb=8Wi=AaWd+DYS7qawX52qxdCfOfY49vozQ@mail.gmail.comSigned-off-by:
-
Linus Walleij authored
commit 5070fb14 upstream. When trying to set the ICST 307 clock to 25174000 Hz I ran into this arithmetic error: the icst_hz_to_vco() correctly figure out DIVIDE=2, RDW=100 and VDW=99 yielding a frequency of 25174000 Hz out of the VCO. (I replicated the icst_hz() function in a spreadsheet to verify this.) However, when I called icst_hz() on these VCO settings it would instead return 4122709 Hz. This causes an error in the common clock driver for ICST as the common clock framework will call .round_rate() on the clock which will utilize icst_hz_to_vco() followed by icst_hz() suggesting the erroneous frequency, and then the clock gets set to this. The error did not manifest in the old clock framework since this high frequency was only used by the CLCD, which calls clk_set_rate() without first calling clk_round_rate() and since the old clock framework would not call clk_round_rate() before setting the frequency, the correct values propagated into the VCO. After some experimenting I figured out that it was due to a simple arithmetic overflow: the divisor for 24Mhz reference frequency as reference becomes 24000000*2*(99+8)=0x132212400 and the "1" in bit 32 overflows and is lost. But introducing an explicit 64-by-32 bit do_div() and casting the divisor into (u64) we get the right frequency back, and the right frequency gets set. Tested on the ARM Versatile. Cc: linux-clk@vger.kernel.org Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by:
-
Takashi Iwai authored
commit 117159f0 upstream. In snd_timer_notify1(), the wrong timer instance was passed for slave ccallback function. This leads to the access to the wrong data when an incompatible master is handled (e.g. the master is the sequencer timer and the slave is a user timer), as spotted by syzkaller fuzzer. This patch fixes that wrong assignment. BugLink: http://lkml.kernel.org/r/CACT4Y+Y_Bm+7epAb=8Wi=AaWd+DYS7qawX52qxdCfOfY49vozQ@mail.gmail.comReported-by:
-
Takashi Iwai authored
commit ddce57a6 upstream. Currently the selected timer backend is referred at any moment from the running PCM callbacks. When the backend is switched, it's possible to lead to inconsistency from the running backend. This was pointed by syzkaller fuzzer, and the commit [7ee96216: ALSA: dummy: Disable switching timer backend via sysfs] disabled the dynamic switching for avoiding the crash. This patch improves the handling of timer backend switching. It keeps the reference to the selected backend during the whole operation of an opened stream so that it won't be changed by other streams. Together with this change, the hrtimer parameter is reenabled as writable now. NOTE: this patch also turned out to fix the still remaining race. Namely, ops was still replaced dynamically at dummy_pcm_open: static int dummy_pcm_open(struct snd_pcm_substream *substream) { .... dummy->timer_ops = &dummy_systimer_ops; if (hrtimer) dummy->timer_ops = &dummy_hrtimer_ops; Since dummy->timer_ops is common among all streams, and when the replacement happens during accesses of other streams, it may lead to a crash. This was actually triggered by syzkaller fuzzer and KASAN. This patch rewrites the code not to use the ops shared by all streams any longer, too. BugLink: http://lkml.kernel.org/r/CACT4Y+aZ+xisrpuM6cOXbL21DuM0yVxPYXf4cD4Md9uw0C3dBQ@mail.gmail.comReported-by:
-
James Bottomley authored
commit 00cd29b7 upstream. The starting node for a klist iteration is often passed in from somewhere way above the klist infrastructure, meaning there's no guarantee the node is still on the list. We've seen this in SCSI where we use bus_find_device() to iterate through a list of devices. In the face of heavy hotplug activity, the last device returned by bus_find_device() can be removed before the next call. This leads to Dec 3 13:22:02 localhost kernel: WARNING: CPU: 2 PID: 28073 at include/linux/kref.h:47 klist_iter_init_node+0x3d/0x50() Dec 3 13:22:02 localhost kernel: Modules linked in: scsi_debug x86_pkg_temp_thermal kvm_intel kvm irqbypass crc32c_intel joydev iTCO_wdt dcdbas ipmi_devintf acpi_power_meter iTCO_vendor_support ipmi_si imsghandler pcspkr wmi acpi_cpufreq tpm_tis tpm shpchp lpc_ich mfd_core nfsd nfs_acl lockd grace sunrpc tg3 ptp pps_core Dec 3 13:22:02 localhost kernel: CPU: 2 PID: 28073 Comm: cat Not tainted 4.4.0-rc1+ #2 Dec 3 13:22:02 localhost kernel: Hardware name: Dell Inc. PowerEdge R320/08VT7V, BIOS 2.0.22 11/19/2013 Dec 3 13:22:02 localhost kernel: ffffffff81a20e77 ffff880613acfd18 ffffffff81321eef 0000000000000000 Dec 3 13:22:02 localhost kernel: ffff880613acfd50 ffffffff8107ca52 ffff88061176b198 0000000000000000 Dec 3 13:22:02 localhost kernel: ffffffff814542b0 ffff880610cfb100 ffff88061176b198 ffff880613acfd60 Dec 3 13:22:02 localhost kernel: Call Trace: Dec 3 13:22:02 localhost kernel: [<ffffffff81321eef>] dump_stack+0x44/0x55 Dec 3 13:22:02 localhost kernel: [<ffffffff8107ca52>] warn_slowpath_common+0x82/0xc0 Dec 3 13:22:02 localhost kernel: [<ffffffff814542b0>] ? proc_scsi_show+0x20/0x20 Dec 3 13:22:02 localhost kernel: [<ffffffff8107cb4a>] warn_slowpath_null+0x1a/0x20 Dec 3 13:22:02 localhost kernel: [<ffffffff8167225d>] klist_iter_init_node+0x3d/0x50 Dec 3 13:22:02 localhost kernel: [<ffffffff81421d41>] bus_find_device+0x51/0xb0 Dec 3 13:22:02 localhost kernel: [<ffffffff814545ad>] scsi_seq_next+0x2d/0x40 [...] And an eventual crash. It can actually occur in any hotplug system which has a device finder and a starting device. We can fix this globally by making sure the starting node for klist_iter_init_node() is actually a member of the list before using it (and by starting from the beginning if it isn't). Reported-by:
Ewan D. Milne <emilne@redhat.com> Tested-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
