This makes debug message get printed even when there is early return.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add Vega12 and Polaris12 device info and device IDs to KFD.
Signed-off-by: Gang Ba <gaba@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This will make reading code much easier. This fixes a few spots missed in a
previous commit with the same title.
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

With GFXOFF enabled, this patch will cause PCO amdgpu_test failed,
but GFXOFF is necessary for PCO, so revert the patch.

This reverts commit b83761bb.

v2: add a comment for future reference (Alex)
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jack Gui <Jack.Gui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Running kfdtest on an AMD Carizzo flooded the kernel log
with thousands of these "was not implemented" messages,
making it impossible to see other messages there.

Ratelimit the messages to prevent user-space from flooding
the kernel log.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
There was a full clock request struct of which only
one value was being used.

[How]
Replace the struct with a uint32_t
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Many panels support more than 8bpc but some modes are unavailable while
running at greater than 8bpc due to DP/HDMI bandwidth constraints.

Support for more than 8bpc was added recently in the driver but it
defaults to the maximum supported bpc - locking out these modes.

This should be a user configurable option such that the user can select
what bpc configuration they would like.

[How]
This patch adds support for getting and setting the amdgpu driver
specific "max bpc" property on the connector.

It also adds support for limiting the output bpc based on the property
value. The default limitation is the lowest value in the range, 8bpc.
This was the old value before the range was uncapped.

This patch should be updated/replaced later once common drm support
for max bpc lands.

Bugzilla: https://bugs.freedesktop.org/108542
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201585
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200645
Fixes: e03fd3f3 ("drm/amd/display: Do not limit color depth to 8bpc")

v2: rebase on upstream (Alex)
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Many panels support more than 8bpc but some modes are unavailable while
running at greater than 8bpc due to DP/HDMI bandwidth constraints.

Support for more than 8bpc was added recently in the driver but it
defaults to the maximum supported bpc - locking out these modes.

This should be a user configurable option such that the user can select
what bpc configuration they would like.

[How]
This patch introduces the "max bpc" amdgpu driver specific connector
property so the user can limit the maximum bpc. It ranges from 8 to 16.

This doesn't directly set the preferred bpc for the panel since it
follows Intel's existing driver conventions.

This proprety should be removed once common drm support for max bpc
lands.

v2: rebase on upstream (Alex)
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/amd/amdgpu/psp_v10_0.c: In function 'psp_v10_0_ring_stop':
drivers/gpu/drm/amd/amdgpu/psp_v10_0.c:230:19: warning:
 variable 'ring' set but not used [-Wunused-but-set-variable]

drivers/gpu/drm/amd/amdgpu/psp_v3_1.c: In function 'psp_v3_1_ring_stop':
drivers/gpu/drm/amd/amdgpu/psp_v3_1.c:359:19: warning:
 variable ‘ring’ set but not used [-Wunused-but-set-variable]

It not used since commit
4ef72453 ("drm/amdgpu: added api for stopping psp ring (v2)")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Aligned the amd_sriov_msg_pf2vf_info_header and amd_sriov_msg_pf2vf_info_header's
definition with libgv.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Frank.Min <Frank.Min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
dc_link_set_backlight_level can be called from a context
where the stream is unknown.  In this case, we can still
find which controller is driving this particular backlight

[How]
Compare links for equality instead of streams
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

expose dcn10_get_surface_visual_confirm_color() to be used in the
future
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

A number of registers need to be updated for all active
pipes wherever any pipe causes a change in watermarks.

This change separates programming of these registers into
a separate function call that is called for all active pipes
during a bw update.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
We observed an issue where a display would not accept programming of
the ignore_MSA_timing_param bit if the stream was blanked.

[How]
move enable_stream_features from enable_link_dp to
core_link_enable_stream, after unblank_stream
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
For some complicated blending transition cases, the head
pipe of the second stream may end up being a higher pipe
index than the free pipe.  In those cases dc_add_plane_to_context
will incorrectly set the tail_pipe to the free pipe, which
will cause the top_pipe and bottom_pipe to be the same

[How]
Move the call to resource_get_tail_pipe_for_stream() to be
before call to acquire_free_pipe_for_stream().
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

DPCD Extended Receiver Capability Field

[Why]
1.dpcd extended receiver capability sometimes read fail,
  and corrupted data leads to sink caps is not correct.
2.sometimes sink reply ack with fewer data

[How]
  check the return value of core_link_read_dpcd,
  try to read again when failure happens
Signed-off-by: Xiaodong Yan <Xiaodong.Yan@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Steven Chiu <steven.chiu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Change the math to work in viewport rotation when calculating
viewport and viewport adjustment. This simplifies the math
for viewport calculation and makes viewport adjustment easier to
understand.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
Underflow is asserted due to some timing condition which does not
actually result in visible underflow (i.e. it occurs while blanked).

[how]
Force clear underflow occured bit whenver we unblank.
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
The condition to check for two pixels per containter has become rather
long and is used in number of places.

[how]
Move the check to a helper function.
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
phy_pix_clk is one of the variable used to check if one PLL can be shared
with displays having common mode set configuration. As of now
phy_pix_clock varialbe is calculated in function dc_validate_stream().
dc_validate_stream() function is called after clocks are assigned for the
new display. Due to this during hotplug, when PLL sharing conditions are
checked for new display phy_pix_clk variable will be 0 and for displays
that are already enabled phy_pix_clk will have some value. Hence PLL will
not be shared and if the display hardware doesn't have any more PLL to
assign, mode set will fail due to resource unavailability.

[how]
Instead of only calculating the phy_pix_clk variable after the PLL is
assigned for new display, this patch calculates phy_pix_clk also during
the before assigning the PLL for new display.
Signed-off-by: Yogesh Mohan Marimuthu <yogesh.mohanmarimuthu@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Typo for return check value.

[How]
Correct one should be "return enable ? true : false;"
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Unused variable "refresh" and incorrect comment formatting

[How]
Remove variable, reindent comments
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
DMCU firmware is not required - the system is expected to run
fine without it.  Therefore, wherever dmcu functions could be
called, dmcu initialization shoudl be checked

[How]
Use the helpful hook dmcu_funcs->is_dmcu_initialized
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
Gamma was always being set as identity on SDR monitor,
leading to no changes in gamma. This caused nightlight to
not apply correctly.

[how]
Added a default gamma structure to compare against
in the sdr case.
Signed-off-by: Murton Liu <murton.liu@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
HUBP underflow is never cleared, which causes underflow in one
test to fail another test, violating the independence requirements

[how]
Rather than make clearing implicit, we explicitly clear underflow
status in DTN.
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

expose this functions for future use.
Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
dc_add_stream_to_context is used to check bw requirement.
It is not an error if it fails.

[How]
Replace DC_ERROR with DC_LOG_WARNING.
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
dc_state has an array of dc_stream_status that contain
pointers to the dc_plane_state and other useful information

Confusingly, dc_stream_state also contains a dc_stream_status
called status.  This struct was partially initialized and
used in a few places

[How]
stream->status.link has been replaced with stream->sink->link.
If a stream does not have a sink, or a sink does not have a link,
something has gone seriously wrong

All other properties of stream->status were zeroed by kzalloc
and never initialized, so they have been replaced by the number 0

This is a refactor: no functional change is intended
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Steven Chiu <steven.chiu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

New features for 4.21:
amdgpu:
- Support for SDMA paging queue on vega
- Put compute EOP buffers into vram for better performance
- Share more code with amdkfd
- Support for scanout with DCC on gfx9
- Initial kerneldoc for DC
- Updated SMU firmware support for gfx8 chips
- Rework CSA handling for eventual support for preemption
- XGMI PSP support
- Clean up RLC handling
- Enable GPU reset by default on VI, SOC15 dGPUs
- Ring and IB test cleanups

amdkfd:
- Share more code with amdgpu

ttm:
- Move global init out of the drivers

scheduler:
- Track if schedulers are ready for work
- Timeout/fault handling changes to facilitate GPU recovery
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181114165113.3751-1-alexander.deucher@amd.com

drm-misc-next for v4.21, part 1:

UAPI Changes:
- Add syncobj timeline support to drm.

Cross-subsystem Changes:
- Remove shared fence staging in dma-buf's fence object, and allow
  reserving more than 1 fence and add more paranoia when debugging.
- Constify infoframe functions in video/hdmi.

Core Changes:
- Add vkms todo, and a lot of assorted doc fixes.
- Drop transitional helpers and convert drivers to use drm_atomic_helper_shutdown().
- Move atomic state helper functions to drm_atomic_state_helper.[ch]
- Refactor drm selftests, and add new tests.
- DP MST atomic state cleanups.
- Drop EXPORT_SYMBOL from drm leases.
- Lease cleanups and fixes.
- Create render node for vgem.

Driver Changes:
- Fix build failure in imx without fbdev emulation.
- Add rotation quirk for GPD win2 panel.
- Add support for various CDTech panels, Banana Pi Panel, DLC1010GIG,
  Olimex LCD-O-LinuXino, Samsung S6D16D0, Truly NT35597 WQXGA,
  Himax HX8357D, simulated RTSM AEMv8.
- Add dw_hdmi support to rockchip driver.
- Fix YUV support in vc4.
- Fix resource id handling in virtio.
- Make rockchip use dw-mipi-dsi bridge driver, and add dual dsi support.
- Advertise that tinydrm only supports DRM_FORMAT_MOD_LINEAR.
- Convert many drivers to use atomic helpers, and drm_fbdev_generic_setup().
- Add Mali linear tiled formats, and enable them in the Mali-DP driver.
- Add support for H6 DE3 mixer 0, DW HDMI, HDMI PHY and TCON TOP.
- Assorted driver cleanups and fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/be7ebd91-edd9-8fa4-4286-1c57e3165113@linux.intel.com

Pull libnvdimm fixes from Dan Williams:
 "A small batch of fixes for v4.20-rc3.

  The overflow continuation fix addresses something that has been broken
  for several releases. Arguably it could wait even longer, but it's a
  one line fix and this finishes the last of the known address range
  scrub bug reports. The revert addresses a lockdep regression. The unit
  tests are not critical to fix, but no reason to hold this fix back.

  Summary:

   - Address Range Scrub overflow continuation handling has been broken
     since it was initially merged. It was only recently that error
     injection and platform-BIOS support enabled this corner case to be
     exercised.

   - The recent attempt to provide more isolation for the kernel Address
     Range Scrub state machine from userapace initiated sessions
     triggers a lockdep report. Revert and try again at the next merge
     window.

   - Fix a kasan reported buffer overflow in libnvdimm unit test
     infrastrucutre (nfit_test)"

* tag 'libnvdimm-fixes-4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  Revert "acpi, nfit: Further restrict userspace ARS start requests"
  acpi, nfit: Fix ARS overflow continuation
  tools/testing/nvdimm: Fix the array size for dimm devices.

Merge misc fixes from Andrew Morton:
 "16 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm/memblock.c: fix a typo in __next_mem_pfn_range() comments
  mm, page_alloc: check for max order in hot path
  scripts/spdxcheck.py: make python3 compliant
  tmpfs: make lseek(SEEK_DATA/SEK_HOLE) return ENXIO with a negative offset
  lib/ubsan.c: don't mark __ubsan_handle_builtin_unreachable as noreturn
  mm/vmstat.c: fix NUMA statistics updates
  mm/gup.c: fix follow_page_mask() kerneldoc comment
  ocfs2: free up write context when direct IO failed
  scripts/faddr2line: fix location of start_kernel in comment
  mm: don't reclaim inodes with many attached pages
  mm, memory_hotplug: check zone_movable in has_unmovable_pages
  mm/swapfile.c: use kvzalloc for swap_info_struct allocation
  MAINTAINERS: update OMAP MMC entry
  hugetlbfs: fix kernel BUG at fs/hugetlbfs/inode.c:444!
  kernel/sched/psi.c: simplify cgroup_move_task()
  z3fold: fix possible reclaim races

Pull scheduler fix from Ingo Molnar:
 "Fix an exec() related scalability/performance regression, which was
  caused by incorrectly calculating load and migrating tasks on exec()
  when they shouldn't be"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Fix cpu_util_wake() for 'execl' type workloads

Pull perf fixes from Ingo Molnar:
 "Fix uncore PMU enumeration for CofeeLake CPUs"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/uncore: Support CoffeeLake 8th CBOX
  perf/x86/intel/uncore: Add more IMC PCI IDs for KabyLake and CoffeeLake CPUs

Pull EFI fixes from Ingo Molnar:
 "Misc fixes: two warning splat fixes, a leak fix and persistent memory
  allocation fixes for ARM"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi: Permit calling efi_mem_reserve_persistent() from atomic context
  efi/arm: Defer persistent reservations until after paging_init()
  efi/arm/libstub: Pack FDT after populating it
  efi/arm: Revert deferred unmap of early memmap mapping
  efi: Fix debugobjects warning on 'efi_rts_work'

Pull ARM spectre updates from Russell King:
 "These are the currently known final bits that resolve the Spectre
  issues. big.Little systems used to be sufficiently identical in that
  there were no differences between individual CPUs in the system that
  mattered to the kernel. With the advent of the Spectre problem, the
  CPUs now have differences in how the workaround is applied.

  As a result of previous Spectre patches, these systems ended up
  reporting quite a lot of:

     "CPUx: Spectre v2: incorrect context switching function, system vulnerable"

  messages due to the action of the big.Little switcher causing the CPUs
  to be re-initialised regularly. This series resolves that issue by
  making the CPU vtable unique to each CPU.

  However, since this is used very early, before per-cpu is setup,
  per-cpu can't be used. We also have a problem that two of the methods
  are not called from preempt-safe paths, but thankfully these remain
  identical between all CPUs in the system. To make sure, we validate
  that these are identical during boot"

* 'spectre' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: spectre-v2: per-CPU vtables to work around big.Little systems
  ARM: add PROC_VTABLE and PROC_TABLE macros
  ARM: clean up per-processor check_bugs method call
  ARM: split out processor lookup
  ARM: make lookup_processor_type() non-__init

Link: http://lkml.kernel.org/r/20181107100247.13359-1-rainccrun@gmail.comSigned-off-by: Chen Chang <rainccrun@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>