- 15 Sep, 2012 5 commits
-
-
Catherine Sullivan authored
This patch adds debugfs support to the ixgbe driver to give users the ability to access kernel information and to simulate kernel events. The filesystem is set up in the following driver/PCI-instance hierarchy: <debugfs> |-- ixgbe |-- PCI instance | |-- attribute files Signed-off-by:
Catherine Sullivan <catherine.sullivan@intel.com> Tested-by:
Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Emil Tantilov authored
Use %u instead of %d to display u32 variable. Signed-off-by:
Emil Tantilov <emil.s.tantilov@intel.com> Tested-by:
Robert Garrett <RobertX.Garrett@intel.com> Tested-by:
-
Alexander Duyck authored
This change fixes the assumptions of the rate limiting code that previously assumed that each VF would only ever have 2 queues. This update makes it so that we now use a queues per pool value that is determined based on the VMDq feature mask. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Acked-By:
John Fastabend <john.r.fastabend@intel.com> Tested-by:
-
Alexander Duyck authored
The PF was not correctly registering any of its VLANs. As a result any VLAN tagged traffic from the VF would not be delivered to the PF because the VLAN was never assigned to the PF pool. In addition the VF was not allowed to receive traffic from VLAN 0 if it was allowed to receive untagged frames. This change corrects that so that it will correctly receive traffic from VLAN 0. Signed-off-by:
Sibai Li <sibai.li@intel.com> Signed-off-by:
-
Otto Estuardo Solares Cabrera authored
Signed-off-by:
Otto Estuardo Solares Cabrera <solca@galileo.edu> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
-
- 13 Sep, 2012 12 commits
-
-
Peter Senna Tschudin authored
Remove useless kfree() and clean up code related to the removal. The semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ position p1,p2; expression x; @@ if (x@p1 == NULL) { ... kfree@p2(x); ... return ...; } @unchanged exists@ position r.p1,r.p2; expression e <= r.x,x,e1; iterator I; statement S; @@ if (x@p1 == NULL) { ... when != I(x,...) S when != e = e1 when != e += e1 when != e -= e1 when != ++e when != --e when != e++ when != e-- when != &e kfree@p2(x); ... return ...; } @ok depends on unchanged exists@ position any r.p1; position r.p2; expression x; @@ ... when != true x@p1 == NULL kfree@p2(x); @depends on !ok && unchanged@ position r.p2; expression x; @@ *kfree@p2(x); // </smpl> Signed-off-by:
Peter Senna Tschudin <peter.senna@gmail.com> Acked-by:
Tilman Schmidt <tilman@imap.cc> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Li RongQing authored
geting route info does not write rt->rt6i_table, so replace write lock with read lock Suggested-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Li RongQing <roy.qing.li@gmail.com> Signed-off-by:
-
Eric Dumazet authored
We kmemdup() templates, so they can be const. Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Compare bits up to the source address's prefix length only to allows DNS load balancing to continue to be used as a tie breaker. Signed-off-by:
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Added labels for site-local addresses (fec0::/10) and 6bone testing addresses (3ffe::/16) in order to depreference them. Note that the RFC introduced new rows for Teredo, ULA and 6to4 addresses in the default policy table. Some of them have different labels from ours. For backward compatibility, we do not change the "default" labels. Signed-off-by:
-
Eric W. Biederman authored
The scsi netlink code confuses the netlink port id with a process id, going so far as to read NETLINK_CREDS(skb)->pid instead of the correct NETLINK_CB(skb).pid. Fortunately it does not matter because nothing registers to respond to scsi netlink requests. The only interesting use of the scsi_netlink interface is fc_host_post_vendor_event which sends a netlink multicast message. Since nothing registers to handle scsi netlink messages kill all of the registration logic, while retaining the same error handling behavior preserving the userspace visible behavior and removing all of the confused code that thought a netlink port id was a process id. This was tested with a kernel allyesconfig build which had no problems. Cc: James Bottomley <James.Bottomley@parallels.com> Cc: James Smart <James.Smart@Emulex.Com> Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Srivatsa S. Bhat authored
Replace the current (inefficient) for-loop with memcpy, to copy priomap. Signed-off-by:
Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by:
-
Srivatsa S. Bhat authored
The update_netdev_tables() function appears to be unnecessary, since the write_update_netdev_table() function will adjust the priomaps as and when required anyway. So drop the usage of update_netdev_tables() entirely. Signed-off-by:
-
Yuval Mintz authored
Change various flows in the bnx2x driver which up until now flapped the link - these flows now benefit from the link flap avoidance mechanism. This includes the removal of the link reset made upon nic init, as it is possible the link is already active at that time. Signed-off-by:
Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by:
Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
-
Yaniv Rosner authored
Various flows in the bnx2x driver cause a link-flap - if the link is up, it would be toggled down (after a mac/phy reset) and then taken back up. In many of these cases, there is no need to do cause such a flap, as the associated flows should not actually affect the link. This patch adds the 'Link Flap Avoidance' mechanism, which allows the driver to better determine if a given flow requires a link change, and thus minimize the number of link flaps caused by the driver. Signed-off-by:
-
Yaniv Rosner authored
Separate the interrupt setting part of each external PHY to a specific function. This allows calling the interrupt setting in case of link-flap avoidance, since some link owners may not enable the interrupt on their own. Signed-off-by:
-
git://1984.lsi.us.es/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== The following patchset contains four Netfilter updates, mostly targeting to fix issues added with IPv6 NAT, and one little IPVS update for net-next: * Remove unneeded conditional free of skb in nfnetlink_queue, from Wei Yongjun. * One semantic path from coccinelle detected the use of list_del + INIT_LIST_HEAD, instead of list_del_init, again from Wei Yongjun. * Fix out-of-bound memory access in the NAT address selection, from Florian Westphal. This was introduced with the IPv6 NAT patches. * Two fixes for crashes that were introduced in the recently merged IPv6 NAT support, from myself. ==================== Signed-off-by:
-
- 12 Sep, 2012 1 commit
-
-
Pablo Neira Ayuso authored
(c7232c99 netfilter: add protocol independent NAT core) added incorrect locking for the module auto-load case in ctnetlink_parse_nat. That function is always called from ctnetlink_create_conntrack which requires no locking. Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
- 10 Sep, 2012 17 commits
-
-
Eric Dumazet authored
commit b6069a95 (filter: add MOD operation) added generic support for modulus operation in BPF. This patch brings JIT support for x86_64 Signed-off-by:
-
Yuval Mintz authored
This patch enables boards with 54618SE phys and a sufficiently new firmware to use native EEE instead of auto-greeen. Signed-off-by:
-
Yuval Mintz authored
Signed-off-by:
-
Yuval Mintz authored
In order to lay the foundation for 1G EEE support, several segments of code which are common to both 1G and 10G EEE configurations were extracted from the 10G EEE configuration flow to their own functions. E.g., bnx2x_eee_initial_config, bnx2x_eee_advertise, bnx2x_eee_disable, etc. The rest of the EEE functions were relocated and placed in a single, continuous section of the file. Signed-off-by:
-
Yuval Mintz authored
Prevent functions from disabling EEE to other functions using other ports. Signed-off-by:
-
Yuval Mintz authored
This patch aligns the EEE status with that of all other link properties, by changing the way its accessed - instead of a direct read to the shared memory, each function maintain its own copy locally. Signed-off-by:
-
Amerigo Wang authored
After this commit: commit 97cac082 Author: David S. Miller <davem@davemloft.net> Date: Mon Jul 2 22:43:47 2012 -0700 ipv6: Store route neighbour in rt6_info struct. we no longer use RCU to protect route neighbour. Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
Cong Wang <amwang@redhat.com> Signed-off-by:
-
Duan Jiong authored
a lot of code has either the memset or an inefficient copy from a static array that contains the all-zeros Ethernet address. Introduce help function eth_zero_addr() to fill an address with all zeros, making the code clearer and allowing us to get rid of some constant arrays. Signed-off-by:
Duan Jiong <djduanjiong@gmail.com> Signed-off-by:
-
Michael Chan authored
Update version to 2.5.13. Reviewed-by:
Eddie Wai <eddie.wai@broadcom.com> Reviewed-by:
Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Michael Chan authored
To save memory and to exit IRQ loop quicker on devices that don't support FCoE. Reviewed-by:
-
Michael Chan authored
This will make it easier to exit IRQ loop and re-arm IRQ on devices that don't support FCoE. Reviewed-by:
-
Michael Chan authored
This will free up unneeded memory. Reviewed-by:
-
Michael Chan authored
These functions are needed to free up memory when the rings are no longer needed. Reviewed-by:
-
Eric Dumazet authored
Add a new ALU opcode, to compute a modulus. Commit ffe06c17 used an ancillary to implement XOR_X, but here we reserve one of the available ALU opcode to implement both MOD_X and MOD_K Signed-off-by:
George Bakos <gbakos@alpinista.org> Cc: Jay Schulist <jschlst@samba.org> Cc: Jiri Pirko <jpirko@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
Eric W. Biederman authored
When a policy expiration is triggered from user space the request travels through km_policy_expired and ultimately into xfrm_exp_policy_notify which calls build_polexpire. build_polexpire uses the netlink port passed to km_policy_expired as the source port for the netlink message it builds. When a state expiration is triggered from user space the request travles through km_state_expired and ultimately into xfrm_exp_state_notify which calls build_expire. build_expire uses the netlink port passed to km_state_expired as the source port for the netlink message it builds. Pass nlh->nlmsg_pid from the user generated netlink message that requested the expiration to km_policy_expired and km_state_expired instead of current->pid which is not a netlink port number. Cc: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Eric W. Biederman authored
It is a frequent mistake to confuse the netlink port identifier with a process identifier. Try to reduce this confusion by renaming fields that hold port identifiers portid instead of pid. I have carefully avoided changing the structures exported to userspace to avoid changing the userspace API. I have successfully built an allyesconfig kernel with this change. Signed-off-by:
Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
-
Wei Yongjun authored
Using list_del_init() instead of list_del() + INIT_LIST_HEAD(). spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
- 09 Sep, 2012 2 commits
-
-
Wei Yongjun authored
Remove pointless conditional before kfree_skb(). Signed-off-by:
-
Florian Westphal authored
include/linux/jhash.h:138:16: warning: array subscript is above array bounds [jhash2() expects the number of u32 in the key] Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
- 08 Sep, 2012 2 commits
-
-
Pablo Neira Ayuso authored
This patch defines netlink_kernel_create as a wrapper function of __netlink_kernel_create to hide the struct module *me parameter (which seems to be THIS_MODULE in all existing netlink subsystems). Suggested by David S. Miller. Signed-off-by:
-
Pablo Neira Ayuso authored
Replace netlink_set_nonroot by one new field `flags' in struct netlink_kernel_cfg that is passed to netlink_kernel_create. This patch also renames NL_NONROOT_* to NL_CFG_F_NONROOT_* since now the flags field in nl_table is generic (so we can add more flags if needed in the future). Also adjust all callers in the net-next tree to use these flags instead of netlink_set_nonroot. Signed-off-by:
-
- 07 Sep, 2012 1 commit
-
-
Timur Tabi authored
mdio-mux-mmioreg.c uses function of_address_to_resource(), which is defined in linux/of_address.h. This fixes a compilation error: drivers/net/phy/mdio-mux-mmioreg.c: In function 'mdio_mux_mmioreg_probe': drivers/net/phy/mdio-mux-mmioreg.c:83:2: error: implicit declaration of function 'of_address_to_resource' Reported-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
Timur Tabi <timur@freescale.com> Signed-off-by:
-
