- 18 Mar, 2020 2 commits
-
-
Xi Wang authored
Encapsulates the wqe buffer process details for datagram seg, fast mr seg and atomic seg. Link: https://lore.kernel.org/r/1583839084-31579-3-git-send-email-liweihang@huawei.comSigned-off-by:
Xi Wang <wangxi11@huawei.com> Signed-off-by:
Weihang Li <liweihang@huawei.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Xi Wang authored
There are serval global functions related to wqe buffer in the hns driver and are called in different files. These symbols cannot directly represent the namespace they belong to. So add prefix 'hns_roce_' to 3 wqe buffer related global functions: get_recv_wqe(), get_send_wqe(), and get_send_extend_sge(). Link: https://lore.kernel.org/r/1583839084-31579-2-git-send-email-liweihang@huawei.comSigned-off-by:
-
- 17 Mar, 2020 18 commits
-
-
Selvin Xavier authored
Since the lifetime of bnxt_re_task is controlled by the kref of device, sched_count is no longer required. Remove it. Link: https://lore.kernel.org/r/1584117207-2664-4-git-send-email-selvin.xavier@broadcom.comSigned-off-by:
Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by:
-
Jason Gunthorpe authored
A work queue cannot just rely on the ib_device not being freed, it must hold a kref on the memory so that the BNXT_RE_FLAG_IBDEV_REGISTERED check works. Fixes: 1ac5a404 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Link: https://lore.kernel.org/r/1584117207-2664-3-git-send-email-selvin.xavier@broadcom.comSigned-off-by:
-
Jason Gunthorpe authored
There are a couple places in this driver running from a work queue that need the ib_device to be registered. Instead of using a broken internal bit rely on the new core code to guarantee device registration. Link: https://lore.kernel.org/r/1584117207-2664-2-git-send-email-selvin.xavier@broadcom.comSigned-off-by:
-
Jason Gunthorpe authored
The first switch statement in cm_destroy_id() tries to move the ID to either IB_CM_IDLE or IB_CM_TIMEWAIT. Both states will block concurrent MAD handlers from progressing. Previous patches removed the unreliably lock/unlock sequences in this flow, this patch removes the extra locking steps and adds the missing parts to guarantee that destroy reaches IB_CM_IDLE. There is no point in leaving the ID in the IB_CM_TIMEWAIT state the memory about to be kfreed. Rework things to hold the lock across all the state transitions and directly assert when done that it ended up in IB_CM_IDLE as expected. This was accompanied by a careful audit of all the state transitions here, which generally did end up in IDLE on their success and non-racy paths. Link: https://lore.kernel.org/r/20200310092545.251365-16-leon@kernel.orgSigned-off-by:
-
Jason Gunthorpe authored
The first thing ib_send_cm_sidr_rep() does is obtain the lock, so use the usual unlocked wrapper, locked actor pattern here. Get rid of the cm_reject_sidr_req() wrapper so each call site can call the locked or unlocked version as required. This avoids a sketchy lock/unlock sequence (which could allow state to change) during cm_destroy_id(). Link: https://lore.kernel.org/r/20200310092545.251365-15-leon@kernel.orgSigned-off-by:
-
Jason Gunthorpe authored
The first thing ib_send_cm_rej() does is obtain the lock, so use the usual unlocked wrapper, locked actor pattern here. This avoids a sketchy lock/unlock sequence (which could allow state to change) during cm_destroy_id(). While here simplify some of the logic in the implementation. Link: https://lore.kernel.org/r/20200310092545.251365-14-leon@kernel.orgSigned-off-by:
-
Jason Gunthorpe authored
The first thing ib_send_cm_drep() does is obtain the lock, so use the usual unlocked wrapper, locked actor pattern here. This avoids a sketchy lock/unlock sequence (which could allow state to change) during cm_destroy_id(). Link: https://lore.kernel.org/r/20200310092545.251365-13-leon@kernel.orgSigned-off-by:
-
Jason Gunthorpe authored
The first thing ib_send_cm_dreq() does is obtain the lock, so use the usual unlocked wrapper, locked actor pattern here. This avoids a sketchy lock/unlock sequence (which could allow state to change) during cm_destroy_id(). Link: https://lore.kernel.org/r/20200310092545.251365-12-leon@kernel.orgSigned-off-by:
-
Jason Gunthorpe authored
These functions all touch state, so must be called under the lock. Inspection shows this is currently true. Link: https://lore.kernel.org/r/20200310092545.251365-11-leon@kernel.orgSigned-off-by:
-
Jason Gunthorpe authored
All accesses to id.state must be done under the spinlock. Fixes: a977049d ("[PATCH] IB: Add the kernel CM implementation") Link: https://lore.kernel.org/r/20200310092545.251365-10-leon@kernel.orgSigned-off-by:
-
Jason Gunthorpe authored
ib_crate_cm_id() immediately places the id in the xarray, and publishes it into the remote_id and remote_qpn rbtrees. This makes it visible to other threads before it is fully set up. It appears the thinking here was that the states IB_CM_IDLE and IB_CM_REQ_RCVD do not allow any MAD handler or lookup in the remote_id and remote_qpn rbtrees to advance. However, cm_rej_handler() does take an action on IB_CM_REQ_RCVD, which is not really expected by the design. Make the whole thing clearer: - Keep the new cm_id out of the xarray until it is completely set up. This directly prevents MAD handlers and all rbtree lookups from seeing the pointer. - Move all the trivial setup right to the top so it is obviously done before any concurrency begins - Move the mutation of the cm_id_priv out of cm_match_id() and into the caller so the state transition is obvious - Place the manipulation of the work_list at the end, under lock, after the cm_id is placed in the xarray. The work_count cannot change on an ID outside the xarray. - Add some comments Link: https://lore.kernel.org/r/20200310092545.251365-9-leon@kernel.orgSigned-off-by:
-
Jason Gunthorpe authored
ib_create_cm_id() immediately places the id in the xarray, so it is visible to network traffic. The state is initially set to IB_CM_IDLE and all the MAD handlers will test this state under lock and refuse to advance from IDLE, so adding to the xarray is harmless. Further, the set to IB_CM_SIDR_REQ_RCVD also excludes all MAD handlers. However, the local_id isn't even used for SIDR mode, and there will be no input MADs related to the newly created ID. So, make the whole flow simpler so it can be understood: - Do not put the SIDR cm_id in the xarray. This directly shows that there is no concurrency - Delete the confusing work_count and pending_list manipulations. This mechanism is only used by MAD handlers and timewait, neither of which apply to SIDR. - Add a few comments and rename 'cur_cm_id_priv' to 'listen_cm_id_priv' - Move other loose sets up to immediately after cm_id creation so that the cm_id is fully configured right away. This fixes an oversight where the service_id will not be returned back on a IB_SIDR_UNSUPPORTED reject. Link: https://lore.kernel.org/r/20200310092545.251365-8-leon@kernel.orgSigned-off-by:
-
Jason Gunthorpe authored
The lock should not be dropped before doing the pr_debug() print as it is accessing data protected by the lock, such as id.state. Fixes: 119bf817 ("IB/cm: Add debug prints to ib_cm") Link: https://lore.kernel.org/r/20200310092545.251365-7-leon@kernel.orgSigned-off-by:
-
Jason Gunthorpe authored
Any manipulation of cm_id->state must be done under the cm_id_priv->lock, the two routines that added listens did not follow this rule, because they never participate in any concurrent access around the state. However, since this exception makes the code hard to understand, simplify the flow so that it can be fully locked: - Move manipulation of listen_sharecount into cm_insert_listen() so it is trivially under the cm.lock without having to expose the cm.lock to the caller. - Push the cm.lock down into cm_insert_listen() and have the function increment the reference count before returning an existing pointer. - Split ib_cm_listen() into an cm_init_listen() and do not call ib_cm_listen() from ib_cm_insert_listen() - Make both ib_cm_listen() and ib_cm_insert_listen() directly call cm_insert_listen() under their cm_id_priv->lock which does both a collision detect and, if needed, the insert (atomically) - Enclose all state manipulation within the cm_id_priv->lock, notice this set can be done safely after cm_insert_listen() as no reader is allowed to read the state without holding the lock. - Do not set the listen cm_id in the xarray, as it is never correct to look it up. This makes the concurrency simpler to understand. Many needless error unwinds are removed in the process. Link: https://lore.kernel.org/r/20200310092545.251365-6-leon@kernel.orgSigned-off-by:
-
Jason Gunthorpe authored
Too much of the destruction is very carefully sensitive to the state and various other things. Move more code to the unconditional path and add several WARN_ONs to check consistency. Link: https://lore.kernel.org/r/20200310092545.251365-5-leon@kernel.orgSigned-off-by:
-
Jason Gunthorpe authored
When creating a cm_id during REQ the id immediately becomes visible to the other MAD handlers, and shortly after the state is moved to IB_CM_REQ_RCVD This allows cm_rej_handler() to run concurrently and free the work: CPU 0 CPU1 cm_req_handler() ib_create_cm_id() cm_match_req() id_priv->state = IB_CM_REQ_RCVD cm_rej_handler() cm_acquire_id() spin_lock(&id_priv->lock) switch (id_priv->state) case IB_CM_REQ_RCVD: cm_reset_to_idle() kfree(id_priv->timewait_info); goto destroy destroy: kfree(id_priv->timewait_info); id_priv->timewait_info = NULL Causing a double free or worse. Do not free the timewait_info without also holding the id_priv->lock. Simplify this entire flow by making the free unconditional during cm_destroy_id() and removing the confusing special case error unwind during creation of the timewait_info. This also fixes a leak of the timewait if cm_destroy_id() is called in IB_CM_ESTABLISHED with an XRC TGT QP. The state machine will be left in ESTABLISHED while it needed to transition through IB_CM_TIMEWAIT to release the timewait pointer. Also fix a leak of the timewait_info if the caller mis-uses the API and does ib_send_cm_reqs(). Fixes: a977049d ("[PATCH] IB: Add the kernel CM implementation") Link: https://lore.kernel.org/r/20200310092545.251365-4-leon@kernel.orgSigned-off-by: -
Jason Gunthorpe authored
The test here typod the cm_id_priv to use, it used the one that was freshly allocated. By definition the allocated one has the matching cm_handler and zero context, so the condition was always true. Instead check that the existing listening ID is compatible with the proposed handler so that it can be shared, as was originally intended. Fixes: 067b171b ("IB/cm: Share listening CM IDs") Link: https://lore.kernel.org/r/20200310092545.251365-3-leon@kernel.orgSigned-off-by:
-
Jason Gunthorpe authored
xa_alloc_cyclic() is a SMP release to be paired with some later acquire during xa_load() as part of cm_acquire_id(). As such, xa_alloc_cyclic() must be done after the cm_id is fully initialized, in particular, it absolutely must be after the refcount_set(), otherwise the refcount_inc() in cm_acquire_id() may not see the set. As there are several cases where a reader will be able to use the id.local_id after cm_acquire_id in the IB_CM_IDLE state there needs to be an unfortunate split into a NULL allocate and a finalizing xa_store. Fixes: a977049d ("[PATCH] IB: Add the kernel CM implementation") Link: https://lore.kernel.org/r/20200310092545.251365-2-leon@kernel.orgSigned-off-by:
-
- 13 Mar, 2020 17 commits
-
-
Weihang Li authored
These judgments were used to keep the compatibility with older versions of userspace that don't have the field named "cap_flags" in structure hns_roce_ib_create_cq_resp. But it will be wrong to compare outlen with the size of resp if another new field were added in resp. oulen should be compared with the end offset of cap_flags in resp. Fixes: 4f8f0d5e ("RDMA/hns: Package the flow of creating cq") Link: https://lore.kernel.org/r/1583845569-47257-1-git-send-email-liweihang@huawei.comSigned-off-by:
-
Jason Gunthorpe authored
Leon Romanovsky says: ==================== This series fixes various corner cases in the mlx5_ib MR cache implementation, see specific commit messages for more information. ==================== Based on the mlx5-next branch at git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Due to dependencies * branch 'mlx5_mr-cache': RDMA/mlx5: Allow MRs to be created in the cache synchronously RDMA/mlx5: Revise how the hysteresis scheme works for cache filling RDMA/mlx5: Fix locking in MR cache work queue RDMA/mlx5: Lock access to ent->available_mrs/limit when doing queue_work RDMA/mlx5: Fix MR cache size and limit debugfs RDMA/mlx5: Always remove MRs from the cache before destroying them RDMA/mlx5: Simplify how the MR cache bucket is located RDMA/mlx5: Rename the tracking variables for the MR cache RDMA/mlx5: Replace spinlock protected write with atomic var {IB,net}/mlx5: Move asynchronous mkey creation to mlx5_ib {IB,net}/mlx5: Assign mkey variant in mlx5_ib only {IB,net}/mlx5: Setup mkey variant before mr create command invocation
-
Jason Gunthorpe authored
If the cache is completely out of MRs, and we are running in cache mode, then directly, and synchronously, create an MR that is compatible with the cache bucket using a sleeping mailbox command. This ensures that the thread that is waiting for the MR absolutely will get one. When a MR allocated in this way becomes freed then it is compatible with the cache bucket and will be recycled back into it. Deletes the very buggy ent->compl scheme to create a synchronous MR allocation. Link: https://lore.kernel.org/r/20200310082238.239865-13-leon@kernel.orgSigned-off-by:
-
Jason Gunthorpe authored
Currently if the work queue is running then it is in 'hysteresis' mode and will fill until the cache reaches the high water mark. This implicit state is very tricky and doesn't interact with pending very well. Instead of self re-scheduling the work queue after the add_keys() has started to create the new MR, have the queue scheduled from reg_mr_callback() only after the requested MR has been added. This avoids the bad design of an in-rush of queue'd work doing back to back add_keys() until EAGAIN then sleeping. The add_keys() will be paced one at a time as they complete, slowly filling up the cache. Also, fix pending to be only manipulated under lock. Link: https://lore.kernel.org/r/20200310082238.239865-12-leon@kernel.orgSigned-off-by:
-
Jason Gunthorpe authored
All of the members of mlx5_cache_ent must be accessed while holding the spinlock, add the missing spinlock in the __cache_work_func(). Using cache->stopped and flush_workqueue() is an inherently racy way to shutdown self-scheduling work on a queue. Replace it with ent->disabled under lock, and always check disabled before queuing any new work. Use cancel_work_sync() to shutdown the queue. Use READ_ONCE/WRITE_ONCE for dev->last_add to manage concurrency as coherency is less important here. Split fill_delay from the bitfield. C bitfield updates are not atomic and this is just a mess. Use READ_ONCE/WRITE_ONCE, but this could also use test_bit()/set_bit(). Link: https://lore.kernel.org/r/20200310082238.239865-11-leon@kernel.orgSigned-off-by:
-
Jason Gunthorpe authored
Accesses to these members needs to be locked. There is no reason not to hold a spinlock while calling queue_work(), so move the tests into a helper and always call it under lock. The helper should be called when available_mrs is adjusted. Link: https://lore.kernel.org/r/20200310082238.239865-10-leon@kernel.orgSigned-off-by:
-
Jason Gunthorpe authored
The size_write function is supposed to adjust the total_mr's to match the user's request, but lacks locking and safety checking. total_mrs can only be adjusted by at most available_mrs. mrs already assigned to users cannot be revoked. Ensure that the user provides a target value within the range of available_mrs and within the high/low water mark. limit_write has confusing and wrong sanity checking, and doesn't have the ability to deallocate on limit reduction. Since both functions use the same algorithm to adjust the available_mrs, consolidate it into one function and write it correctly. Fix the locking and by holding the spinlock for all accesses to ent->X. Always fail if the user provides a malformed string. Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters") Link: https://lore.kernel.org/r/20200310082238.239865-9-leon@kernel.orgSigned-off-by:
-
Jason Gunthorpe authored
The cache bucket tracks the total number of MRs that exists, both inside and outside of the cache. Removing a MR from the cache (by setting cache_ent to NULL) without updating total_mrs will cause the tracking to leak and be inflated. Further fix the rereg_mr path to always destroy the MR. reg_create will always overwrite all the MR data in mlx5_ib_mr, so the MR must be completely destroyed, in all cases, before this function can be called. Detach the MR from the cache and unconditionally destroy it to avoid leaking HW mkeys. Fixes: afd14174 ("IB/mlx5: Use direct mkey destroy command upon UMR unreg failure") Fixes: 56e11d62 ("IB/mlx5: Added support for re-registration of MRs") Link: https://lore.kernel.org/r/20200310082238.239865-8-leon@kernel.orgSigned-off-by:
-
Jason Gunthorpe authored
There are many bad APIs here that are accepting a cache bucket index instead of a bucket pointer. Many of the callers already have a bucket pointer, so this results in a lot of confusing uses of order2idx(). Pass the struct mlx5_cache_ent into add_keys(), remove_keys(), and alloc_cached_mr(). Once the MR is in the cache, store the cache bucket pointer directly in the MR, replacing the 'bool allocated_from cache'. In the end there is only one place that needs to form index from order, alloc_mr_from_cache(). Increase the safety of this function by disallowing it from accessing cache entries in the ODP special area. Link: https://lore.kernel.org/r/20200310082238.239865-7-leon@kernel.orgSigned-off-by:
-
Jason Gunthorpe authored
The old names do not clearly indicate the intent. Link: https://lore.kernel.org/r/20200310082238.239865-6-leon@kernel.orgSigned-off-by:
-
Saeed Mahameed authored
mkey variant calculation was spinlock protected to make it atomic, replace that with one atomic variable. Link: https://lore.kernel.org/r/20200310082238.239865-4-leon@kernel.orgSigned-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Michael Guralnik authored
As mlx5_ib is the only user of the mlx5_core_create_mkey_cb, move the logic inside mlx5_ib and cleanup the code in mlx5_core. Signed-off-by:
Michael Guralnik <michaelgur@mellanox.com> Signed-off-by:
-
Saeed Mahameed authored
mkey variant is not required for mlx5_core use, move the mkey variant counter to mlx5_ib. Signed-off-by:
-
Saeed Mahameed authored
On reg_mr_callback() mlx5_ib is recalculating the mkey variant which is wrong and will lead to using a different key variant than the one submitted to firmware on create mkey command invocation. To fix this, we store the mkey variant before invoking the firmware command and use it later on completion (reg_mr_callback). Signed-off-by:
Eli Cohen <eli@mellanox.com> Signed-off-by:
-
Leon Romanovsky authored
Peer to peer support was never implemented, so delete it to make code less clutter. Link: https://lore.kernel.org/r/20200310091438.248429-6-leon@kernel.orgSigned-off-by:
Mark Zhang <markz@mellanox.com> Signed-off-by:
-
Leon Romanovsky authored
Convert mlx5 driver to use offsetofend() instead of its duplicated variant. Link: https://lore.kernel.org/r/20200310091438.248429-5-leon@kernel.orgSigned-off-by:
-
Leon Romanovsky authored
Convert mlx4 to use in-kernel offsetofend() instead of its duplicated implementation. Link: https://lore.kernel.org/r/20200310091438.248429-3-leon@kernel.orgSigned-off-by:
-
- 10 Mar, 2020 3 commits
-
-
Alex Vesker authored
Until now the flex parser capability was used in ib_query_device() to indicate tunnel_offloads_caps support for mpls_over_gre/mpls_over_udp. Newer devices and firmware will have configurations with the flexparser but without mpls support. Testing for the flex parser capability was a mistake, the tunnel_stateless capability was intended for detecting mpls and was introduced at the same time as the flex parser capability. Otherwise userspace will be incorrectly informed that a future device supports MPLS when it does not. Link: https://lore.kernel.org/r/20200305123841.196086-1-leon@kernel.org Cc: <stable@vger.kernel.org> # 4.17 Fixes: e818e255 ("IB/mlx5: Expose MPLS related tunneling offloads") Signed-off-by:
Alex Vesker <valex@mellanox.com> Reviewed-by:
Ariel Levkovich <lariel@mellanox.com> Signed-off-by:
-
Erez Shitrit authored
Those macros are already defined in include/linux/mlx5/driver.h, so delete their duplicate variants. Link: https://lore.kernel.org/r/20200310075706.238592-1-leon@kernel.orgSigned-off-by:
Yevgeny Kliteynik <kliteyn@mellanox.com> Signed-off-by:
Erez Shitrit <erezsh@mellanox.com> Reviewed-by:
-
Zhu Yanjun authored
The header file rdma_core.h is duplicate, so let's remove it. Fixes: 622db5b6 ("RDMA/core: Add trace points to follow MR allocation") Link: https://lore.kernel.org/r/20200310091656.249696-1-leon@kernel.orgSigned-off-by:
Zhu Yanjun <yanjunz@mellanox.com> Signed-off-by:
-
