- 22 Sep, 2022 25 commits
-
-
Lorenzo Bianconi authored
Introduce wed0 and wed1 nodes in order to enable offloading forwarding between ethernet and wireless devices on the mt7986 chipset. Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-
Paolo Abeni authored
Wen Gu says: ==================== Separate SMC parameter settings from TCP sysctls SMC shares some sysctls with TCP, but considering the difference between these two protocols, it may not be very suitable for SMC to reuse TCP parameter settings in some cases, such as keepalive time or buffer size. So this patch set aims to introduce some SMC specific sysctls to independently and flexibly set the parameters that suit SMC. ==================== Link: https://lore.kernel.org/r/1663667542-119851-1-git-send-email-guwen@linux.alibaba.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Tony Lu authored
Currently, SMC uses smc->sk.sk_{rcv|snd}buf to create buffers for send buffer and RMB. And the values of buffer size are from tcp_{w|r}mem in clcsock. The buffer size from TCP socket doesn't fit SMC well. Generally, buffers are usually larger than TCP for SMC-R/-D to get higher performance, for they are different underlay devices and paths. So this patch unbinds buffer size from TCP, and introduces two sysctl knobs to tune them independently. Also, these knobs are per net namespace and work for containers. Signed-off-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-
Wen Gu authored
SMC-R tests the viability of link by sending out TEST_LINK LLC messages over RoCE fabric when connections on link have been idle for a time longer than keepalive interval (testlink time). But using tcp_keepalive_time as testlink time maybe not quite suitable because it is default no less than two hours[1], which is too long for single link to find peer dead. The active host will still use peer-dead link (QP) sending messages, and can't find out until get IB_WC_RETRY_EXC_ERR error CQEs, which takes more time than TEST_LINK timeout (SMC_LLC_WAIT_TIME) normally. So this patch introduces a independent sysctl for SMC-R to set link keepalive time, in order to detect link down in time. The default value is 30 seconds. [1] https://www.rfc-editor.org/rfc/rfc1122#page-101Signed-off-by: Wen Gu <guwen@linux.alibaba.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-
Sun Ke authored
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: fef29982 ("net: altera: tse: convert to phylink") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Sun Ke <sunke32@huawei.com> Link: https://lore.kernel.org/r/20220920020041.2685948-1-sunke32@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-nextJakub Kicinski authored
Florian Westphal says: ==================== netfilter patches for net-next Remove GPL license copypastry in uapi files, those have SPDX tags. From Christophe Jaillet. Remove unused variable in rpfilter, from Guillaume Nault. Rework gc resched delay computation in conntrack, from Antoine Tenart. * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: rpfilter: Remove unused variable 'ret'. headers: Remove some left-over license text in include/uapi/linux/netfilter/ netfilter: conntrack: revisit the gc initial rescheduling bias netfilter: conntrack: fix the gc rescheduling delay ==================== Link: https://lore.kernel.org/r/20220921095000.29569-1-fw@strlen.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Uwe Kleine-König authored
Usually it's not necessary to declare static functions if the symbols are in the right order. Moving the definition of tsi_eth_driver down in the compilation unit allows to drop two such declarations. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20220919131515.885361-1-u.kleine-koenig@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Qingqing Yang authored
We've met the problem that when there is a vlan tag inside GRE encapsulation, the match of num_of_vlans fails. It is caused by the vlan tag inside GRE payload has been counted into num_of_vlans, which is not expected. One example packet is like this: Ethernet II, Src: Broadcom_68:56:07 (00:10:18:68:56:07) Dst: Broadcom_68:56:08 (00:10:18:68:56:08) 802.1Q Virtual LAN, PRI: 0, DEI: 0, ID: 100 Internet Protocol Version 4, Src: 192.168.1.4, Dst: 192.168.1.200 Generic Routing Encapsulation (Transparent Ethernet bridging) Ethernet II, Src: Broadcom_68:58:07 (00:10:18:68:58:07) Dst: Broadcom_68:58:08 (00:10:18:68:58:08) 802.1Q Virtual LAN, PRI: 0, DEI: 0, ID: 200 ... It should match the (num_of_vlans 1) rule, but it matches the (num_of_vlans 2) rule. The vlan tags inside the GRE or other tunnel encapsulated payload should not be taken into num_of_vlans. The fix is to stop counting the vlan number when the encapsulation bit is set. Fixes: 34951fcf ("flow_dissector: Add number of vlan tags dissector") Signed-off-by: Qingqing Yang <qingqing.yang@broadcom.com> Reviewed-by: Boris Sukholitko <boris.sukholitko@broadcom.com> Link: https://lore.kernel.org/r/20220919074808.136640-1-qingqing.yang@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jamal Hadi Salim authored
Added by: commit e5cf1baf ("act_mirred: use TC_ACT_REINSERT when possible") but no longer useful. Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20220919130627.3551233-1-jhs@mojatatu.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Colin Foster says: ==================== clean up ocelot_reset() routine ocelot_reset() will soon be exported to a common library to be used by the ocelot_ext system. This will make error values from regmap calls possible, so they must be checked. Additionally, readx_poll_timeout() can be substituted for the custom loop, as a simple cleanup. I don't have hardware to verify this set directly, but there shouldn't be any functional changes. ==================== Link: https://lore.kernel.org/r/20220917175127.161504-1-colin.foster@in-advantage.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Colin Foster authored
The ocelot_reset() function utilizes regmap_field_write() but wasn't checking return values. While this won't cause issues for the current MMIO regmaps, it could be an issue for externally controlled interfaces. Add checks for these return values. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Colin Foster authored
Clean up the reset code by utilizing readx_poll_timeout instead of a custom loop. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Haoyue Xu says: ==================== net: ll_temac: Cleanup for clearing static warnings Most static warnings are detected by Checkpatch.pl, mainly about: (1) #1: About the comments. (2) #2: About function name in a string. (3) #3: About the open parenthesis. (4) #4: About the else branch. (6) #6: About trailing statements. (7) #5,#7: About blank lines and spaces. ==================== Link: https://lore.kernel.org/r/20220917103843.526877-1-xuhaoyue1@hisilicon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
huangjunxian authored
Cleaning some static warnings of indent. Signed-off-by: huangjunxian <huangjunxian6@hisilicon.com> Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com> Reviewed-by: Harini Katakam <harini.katakam@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
huangjunxian authored
Cleaning some static warnings of trailing statements. Signed-off-by: huangjunxian <huangjunxian6@hisilicon.com> Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com> Reviewed-by: Harini Katakam <harini.katakam@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
huangjunxian authored
Cleaning some static warnings of missing spaces around '='. Signed-off-by: huangjunxian <huangjunxian6@hisilicon.com> Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com> Reviewed-by: Harini Katakam <harini.katakam@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
huangjunxian authored
Cleaning some static warnings of unnecessary else branch. Signed-off-by: huangjunxian <huangjunxian6@hisilicon.com> Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com> Reviewed-by: Harini Katakam <harini.katakam@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
huangjunxian authored
Cleaning some static warnings of open parenthesis. Signed-off-by: huangjunxian <huangjunxian6@hisilicon.com> Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com> Reviewed-by: Harini Katakam <harini.katakam@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Haoyue Xu authored
As Checkpatch.pl warns, prefer using '"%s...", __func__' to using 'temac_device_reset', this function's name, in a string. Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com> Reviewed-by: Harini Katakam <harini.katakam@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
huangjunxian authored
Cleaning some static warnings of block comments. Signed-off-by: huangjunxian <huangjunxian6@hisilicon.com> Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com> Reviewed-by: Harini Katakam <harini.katakam@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Xiu Jianfeng authored
Add missing __init/__exit annotations to module init/exit funcs. Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com> Link: https://lore.kernel.org/r/20220917083535.20040-1-xiujianfeng@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Xiu Jianfeng authored
Add missing __init/__exit annotations to module init/exit funcs. Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com> Link: https://lore.kernel.org/r/20220917082118.7971-1-xiujianfeng@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
William Dean authored
such expression: if (err) return err; return 0; can simplify to: return err; Signed-off-by: William Dean <williamsukatube@163.com> Link: https://lore.kernel.org/r/20220917063556.2673-1-williamsukatube@163.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jian Shen authored
The inptu parameter 'features' is unused now. so remove it. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Link: https://lore.kernel.org/r/20220917020451.63417-1-huangguangbin2@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Uwe Kleine-König authored
Quite a few of the functions and other symbols defined in this driver had forward declarations. They can all be dropped after reordering them. This saves a few lines of code and reduces code duplication. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20220917225142.473770-1-u.kleine-koenig@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 21 Sep, 2022 15 commits
-
-
Jakub Kicinski authored
Guangbin Huang says: ==================== net: hns3: updates for -next This series includes some updates for the HNS3 ethernet driver. ==================== Link: https://lore.kernel.org/r/20220916023803.23756-1-huangguangbin2@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Guangbin Huang authored
Currently, driver will always clear user defined field of flow director in uninit process and sync flow director table in periodic task. However, if hardware does not support flow director driver should not do those processes, so add fd ability judgement. The fd ability judgement in function hclge_clear_fd_rules_in_list() is redundant, so delete it. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Hao Lan authored
Currently, the function hclge_mbx_handler() has too many switch-case statements, it makes this function too long. To improve code readability, refactor this function and use lookup table instead. Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Guangbin Huang authored
Currently, when function hns3_nic_select_queue() converts dscp to priority, it calls an indirect callback ae_algo->ops->get_dscp_prio to get priority. However as function hns3_nic_select_queue() is in fast path, the indirect call may cause degradation of performance. For optimization, this patch moves dscp_app_cnt and dscp_prio from struct hclge_tm_info to struct hnae3_knic_private_info, so they can be used in both hclge and hns3 layers. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Yonglong Liu authored
This patch add support for external loopback test. The successful test need the link is up with duplex full. The driver do external loopback first, and then the whole offline test. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Edward Cree authored
There's no clear explanation of what VF Representors are for, their semantics, etc., outside of vendor docs and random conference slides. Add a document explaining Representors and defining what drivers that implement them are expected to do. Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Link: https://lore.kernel.org/r/20220905135557.39233-1-ecree@xilinx.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
David S. Miller authored
Yang Yingliang says: ==================== net: drivers: Switch to use dev_err_probe() helper In the probe path, dev_err() can be replace with dev_err_probe() which will check if error code is -EPROBE_DEFER. It will print error code in a human readable way and simplify the code. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yang Yingliang authored
dev_err() can be replace with dev_err_probe() which will check if error code is -EPROBE_DEFER. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yang Yingliang authored
dev_err() can be replace with dev_err_probe() which will check if error code is -EPROBE_DEFER. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yang Yingliang authored
dev_err() can be replace with dev_err_probe() which will check if error code is -EPROBE_DEFER. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yang Yingliang authored
dev_err() can be replace with dev_err_probe() which will check if error code is -EPROBE_DEFER. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yang Yingliang authored
dev_err() can be replace with dev_err_probe() which will check if error code is -EPROBE_DEFER. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yang Yingliang authored
dev_err() can be replace with dev_err_probe() which will check if error code is -EPROBE_DEFER. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yang Yingliang authored
dev_err() can be replace with dev_err_probe() which will check if error code is -EPROBE_DEFER. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ziyang Xuan authored
Now, register_pernet_subsys() and register_netdevice_notifier() are both after sock_register(). It can create PF_PACKET socket and process socket once sock_register() successfully. It is possible PF_PACKET socket is creating but register_pernet_subsys() and register_netdevice_notifier() are not registered yet. Thus net->packet.sklist_lock and net->packet.sklist will be accessed without initialization that is done in packet_net_init(). Although this is a low probability scenario. Move register_pernet_subsys() and register_netdevice_notifier() to the front in packet_init(). Correspondingly, adjust the unregister process in packet_exit(). Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-