- 14 Jun, 2021 1 commit
-
-
Thomas Zimmermann authored
Backmerge to prepare for i915-ttm topic branch. Signed-off-by:Thomas Zimmermann <tzimmermann@suse.de>
-
- 12 Jun, 2021 9 commits
-
-
Zack Rusin authored
The declarations of ttm_range_man_init and ttm_range_man_fini have been moved to ttm_range_manager.h so we have to add it to the include list. Signed-off-by:
Zack Rusin <zackr@vmware.com> Reported-by:
Randy Dunlap <rdunlap@infradead.org> Fixes: 3eb7d96e ("drm/ttm: flip over the range manager to self allocated nodes") Cc: Christian König <christian.koenig@amd.com> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by:
Martin Krastev <krastevm@vmware.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210609172307.131929-10-zackr@vmware.com
-
Zack Rusin authored
vmw_chipset was duplicating pci_id. They are exactly the same variable just with two different names. Becuase pci_id was already used to detect the SVGA version, there's no point in having vmw_chipset and thus we can remove it. All references to vmw_chipset should use pci_id. Signed-off-by:
Roland Scheidegger <sroland@vmware.com> Reviewed-by:
-
Martin Krastev authored
drm/vmwgfx: Refactor vmw_mksstat_remove_ioctl to expect pgid match with vmw_mksstat_add_ioctl to authorise removal. Original vmw_mksstat_remove_ioctl expected pid to match the corresponding vmw_mksstat_add_ioctl. That made impossible en-masse removals by one pid, which is a valid use case, so pid match was discarded. Current change enforces a broader pgid match as a form of protection from arbitrary processes interrupting an ongoing mks-guest-stats. Reviewed-by:
-
Zack Rusin authored
The indirection doesn't make sense because we always go through the same function pointer. Instead of the extra indirection lets inline the access to the current page. Signed-off-by:
-
Zack Rusin authored
This code has been unused for a while now. When the explicit checks for whether the driver is running on top of non-coherent swiotlb have been deprecated we lost the ability to fallback to physical mappings. Instead of trying to readd a module parameter to force usage of physical addresses it's better to just force coherent TTM pages via the force_coherent module parameter making this code pointless. Signed-off-by:
-
Zack Rusin authored
Fix some minor issues that Coverity spotted in the code. None of that are serious but they're all valid concerns so fixing them makes sense. Signed-off-by:
-
Zack Rusin authored
The has_dx variable was only set during the initialization which meant that UPDATE_SUBRESOURCE was never used. We were emulating it with UPDATE_GB_IMAGE but that's always been a stop-gap. Instead of has_dx which has been deprecated a long time ago we need to check for whether shader model 4.0 or newer is available to the device. Signed-off-by:
-
Martin Krastev authored
VMware mks-guest-stats mechanism allows the collection of performance stats from guest userland GL contexts, as well as from vmwgfx kernelspace, via a set of sw- defined performance counters. The userspace performance counters are (de)registerd with vmware-vmx-stats hypervisor via new iocts. The vmwgfx kernelspace counters are controlled at build-time via a new config DRM_VMWGFX_MKSSTATS. * Add vmw_mksstat_{add|remove|reset}_ioctl controlling the tracking of mks-guest-stats in guest winsys contexts * Add DRM_VMWGFX_MKSSTATS config to drivers/gpu/drm/vmwgfx/Kconfig controlling the instrumentation of vmwgfx for kernelspace mks-guest-stats counters * Instrument vmwgfx vmw_execbuf_ioctl to collect mks-guest-stats according to DRM_VMWGFX_MKSSTATS Signed-off-by: -
Zack Rusin authored
Make devcaps code self-contained so that it's easier to cache and operate on them. As the number of devcaps got bigger the code dealing with them got more and more tricky. Lets create a central place to deal with all the complexity. This lets us remove the lock we used to require to deal with register write races because we only read the devcaps at initialization. Signed-off-by:
-
- 11 Jun, 2021 17 commits
-
-
Douglas Anderson authored
Putting the panel under the bridge chip (under the aux-bus node) allows the panel driver to get access to the DP AUX bus, enabling all sorts of fabulous new features. While we're at this, get rid of a level of hierarchy for the panel node. It doesn't need "ports / port" and can just have a "port" child. For Linux, this patch has a hard requirement on the patches adding DP AUX bus support to the ti-sn65dsi86 bridge chip driver. See the patch ("drm/bridge: ti-sn65dsi86: Add support for the DP AUX bus"). Signed-off-by:Douglas Anderson <dianders@chromium.org> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210611101711.v10.11.Ibdb7735fb1844561b902252215a69526a14f9abd@changeid
-
Douglas Anderson authored
As I was testing to make sure that the DEFER path worked well with my patch series, I got tired of seeing this scary message in my logs just because the panel needed to defer: [drm:ti_sn_bridge_probe] *ERROR* could not find any panel node Let's use dev_err_probe() which nicely quiets this error and also simplifies the code a tiny bit. We'll also update other places in the file which can use dev_err_probe(). Signed-off-by:
-
Douglas Anderson authored
This is really just a revert of commit 58074b08 ("drm/bridge: ti-sn65dsi86: Read EDID blob over DDC"), resolving conflicts. The old code failed to read the EDID properly in a very important case: before the bridge's pre_enable() was called. The way things need to work: 1. Read the EDID. 2. Based on the EDID, decide on video settings and pixel clock. 3. Enable the bridge w/ the desired settings. The way things were working: 1. Try to read the EDID but fail; fall back to hardcoded values. 2. Based on hardcoded values, decide on video settings and pixel clock. 3. Enable the bridge w/ the desired settings. 4. Try again to read the EDID, it works now! 5. Realize that the hardcoded settings weren't quite right. 6. Disable / reenable the bridge w/ the right settings. The reasons for the failures were twofold: a) Since we never ran the bridge chip's pre-enable then we never set the bit to ignore HPD. This meant the bridge chip didn't even _try_ to go out on the bus and communicate with the panel. b) Even if we fixed things to ignore HPD, the EDID still wouldn't read if the panel wasn't on. Instead of reverting the code, we could fix it to set the HPD bit and also power on the panel. However, it also works nicely to just let the panel code read the EDID. Now that we've split the driver up we can expose the DDC AUX channel bus to the panel node. The panel can take charge of reading the EDID. NOTE: in order for things to work, anyone that needs to read the EDID will need to instantiate their panel using the new DP AUX bus (AKA by listing their panel under the "aux-bus" node of the bridge chip in the device tree). In the future if we want to use the bridge chip to provide a full external DP port (which won't have a panel) then we will have to conditinally add EDID reading back in. Suggested-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Douglas Anderson authored
We want to provide our panel with access to the DP AUX channel. The way to do this is to let our panel be a child of ours using the fancy new DP AUX bus support. Signed-off-by:
Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210611101711.v10.8.Ib5fe0638da85800141ce141bb8e441c5f25438d4@changeid
-
Douglas Anderson authored
On its own, this change looks a little strange and doesn't do too much useful. To understand why we're doing this we need to look forward to future patches where we're going to probe our panel using the new DP AUX bus. See the patch ("drm/bridge: ti-sn65dsi86: Add support for the DP AUX bus"). Let's think about the set of steps we'll want to happen when we have the DP AUX bus: 1. We'll create the DP AUX bus. 2. We'll populate the devices on the DP AUX bus (AKA our panel). 3. For setting up the bridge-related functions of ti-sn65dsi86 we'll need to get a reference to the panel. If we do #1 - #3 in a single probe call things _mostly_ will work, but it won't be massively robust. Let's explore. First let's think of the easy case of no -EPROBE_DEFER. In that case in step #2 when we populate the devices on the DP AUX bus it will actually try probing the panel right away. Since the panel probe doesn't defer then in step #3 we'll get a reference to the panel and we're golden. Second, let's think of the case when the panel returns -EPROBE_DEFER. In that case step #2 won't synchronously create the panel (it'll just add the device to the defer list to do it later). Step #3 will fail to get the panel and the bridge sub-device will return -EPROBE_DEFER. We'll depopulate the DP AUX bus. Later we'll try the whole sequence again. Presumably the panel will eventually stop returning -EPROBE_DEFER and we'll go back to the first case where things were golden. So this case is OK too even if it's a bit ugly that we have to keep creating / deleting the AUX bus over and over. So where is the problem? As I said, it's mostly about robustness. I don't believe that step #2 (creating the sub-devices) is really guaranteed to be synchronous. This is evidenced by the fact that it's allowed to "succeed" by just sticking the device on the deferred list. If anything about the process changes in Linux as a whole and step #2 just kicks off the probe of the DP AUX endpoints (our panel) in the background then we'd be in trouble because we might never get the panel in step #3. Adding an extra sub-device means we just don't need to worry about it. We'll create the sub-device for the DP AUX bus and it won't go away until the whole ti-sn65dsi86 driver goes away. If the bridge sub-device defers (maybe because it can't find the panel) that won't depopulate the DP AUX bus and so we don't need to worry about it. NOTE: there's a little bit of a trick here. Though the AUX channel can run without the MIPI-to-eDP bits of the code, the MIPI-to-eDP bits can't run without the AUX channel. We could come up a complicated signaling scheme (have the MIPI-to-eDP bits return EPROBE_DEFER for a while or wait on some sort of completion), but it seems simple enough to just not even bother creating the bridge device until the AUX channel probes. That's what we'll do. Signed-off-by: -
Douglas Anderson authored
If panel-simple is instantiated as a DP AUX bus endpoint then we have access to the DP AUX bus. Let's stash it in the panel-simple structure, leaving it NULL for the cases where the panel is instantiated in other ways. If we happen to have access to the DP AUX bus and we weren't provided the ddc-i2c-bus in some other manner, let's use the DP AUX bus for it. Signed-off-by:
-
Douglas Anderson authored
The panel-simple driver can already have devices instantiated as platform devices or MIPI DSI devices. Let's add a 3rd way to instantiate it: as DP AUX endpoint devices. At the moment there is no benefit to instantiating it in this way, but: - In the next patch we'll give it access to the DDC channel via the DP AUX bus. - Possibly in the future we may use this channel to configure the backlight. Signed-off-by:
-
Douglas Anderson authored
Historically "simple" eDP panels have been handled by panel-simple which is a basic platform_device. In the device tree, the panel node was at the top level and not connected to anything else. Let's change it so that, instead, panels can be represented as being children of the "DP AUX bus". Essentially we're saying that the hierarchy that we're going to represent is the "control" connections between devices. The DP AUX bus is a control bus provided by an eDP controller (the parent) and consumed by a device like a panel (the child). The primary incentive here is to cleanly provide the panel driver the ability to communicate over the AUX bus while handling lifetime issues properly. The panel driver may want the AUX bus for controlling the backlight or querying the panel's EDID. The idea for this bus's design was hashed out over IRC [1]. [1] https://people.freedesktop.org/~cbrill/dri-log/?channel=dri-devel&date=2021-05-11 Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Rajeev Nandan <rajeevny@codeaurora.org> Suggested-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Douglas Anderson authored
The patch ("dt-bindings: drm: Introduce the DP AUX bus") talks about how using the DP AUX bus is better than learning how to slice bread. Let's add it to the ti-sn65dsi86 bindings. Signed-off-by:Rob Herring <robh@kernel.org> Reviewed-by:
-
Douglas Anderson authored
We want to be able to list an eDP panel as a child of an eDP controller node to represent the fact that the panel is connected to the controller's DP AUX bus. Though the panel and the controller are connected in several ways, the DP AUX bus is the primary control interface between the two and thus makes the most sense to model in device tree hierarchy. Listing a panel in this way makes it possible for the panel driver to easily get access to the DP AUX bus that it resides on, which can be useful to help in auto-detecting the panel and for turning on various bits. NOTE: historically eDP panels were _not_ listed under their controller but were listed at the top level of the device tree. This will still be supported for backward compatibility (and while DP controller drivers are adapted to support the new DT syntax) but should be considered deprecated since there is no downside to listing the panel under the controller. For now, the DP AUX bus bindings will only support an eDP panel underneath. It's possible it could be extended to allow having a DP connector under it in the future. NOTE: there is no "Example" in this bindings file. Yikes! This avoids duplicating the same example lots of places. See users of the aux bus (like ti-sn65dsi86) for examples. The idea for this bus's design was hashed out over IRC [1]. [1] https://people.freedesktop.org/~cbrill/dri-log/?channel=dri-devel&date=2021-05-11Signed-off-by:
-
Douglas Anderson authored
The HPD (Hot Plug Detect) signal is present in many (probably even "most") eDP panels. For eDP, this signal isn't actually used for detecting hot-plugs of the panel but is more akin to a "panel ready" signal. After you provide power to the panel, panel timing diagrams typically say that you should wait for HPD to be asserted (or wait a fixed amount of time) before talking to the panel. The panel-simple bindings describes many eDP panels and many of these panels provide the HPD signal. We should add the HPD-related properties to the panel-simple bindings. The HPD properties are actually defined in panel-common.yaml, so adding them here just documents that they are OK for panels handled by the panel-simple bindings. NOTE: whether or not we'd include HPD properties in the panel node is more a property of the board design than the panel itself. For most boards using these eDP panels everything "magically" works without specifying any HPD properties and that's been why we haven't needed to allow the HPD properties earlier. On these boards the HPD signal goes directly to a dedicated "HPD" input to the eDP controller and this connection doesn't need to be described in the device tree. The only time the HPD properties are needed in the device tree are if HPD is hooked up to a GPIO or if HPD is normally on the panel but isn't used on a given board. That means that if we don't allow the HPD properties in panel-simple then one could argue that we've got to boot all eDP panels (or at least all those that someone could conceivably put on a system where HPD goes to a GPIO or isn't hooked up) from panel-simple. Signed-off-by:
-
Wei Yongjun authored
Fix the missing clk_disable_unprepare() before return from panfrost_clk_init() in the error handling case. Fixes: b681af0b ("drm: panfrost: add optional bus_clock") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by:
Steven Price <steven.price@arm.com> Signed-off-by:
-
Dave Airlie authored
Merge tag 'exynos-drm-next-for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next Two cleanups - These patches make Exynos DRM driver to use pm_runtime_resume_and_get() function instead of m_runtime_get_sync() to deal with usage counter. pm_runtime_get_sync() increases the usage counter even when it failed, which could make callers to forget to decrease the usage counter. pm_runtime_resume_and_get() decreases the usage counter regardless of whether it failed or not. Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Inki Dae <inki.dae@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210611025939.393282-1-inki.dae@samsung.com
-
Dave Airlie authored
Merge tag 'drm-intel-gt-next-2021-06-10' of git://anongit.freedesktop.org/drm/drm-intel into drm-next UAPI Changes: - Disable mmap ioctl for gen12+ (excl. TGL-LP) - Start enabling HuC loading by default for upcoming Gen12+ platforms (excludes TGL and RKL) Core Changes: - Backmerge of drm-next Driver Changes: - Revert "i915: use io_mapping_map_user" (Eero, Matt A) - Initialize the TTM device and memory managers (Thomas) - Major rework to the GuC submission backend to prepare for enabling on new platforms (Michal Wa., Daniele, Matt B, Rodrigo) - Fix i915_sg_page_sizes to record dma segments rather than physical pages (Thomas) - Locking rework to prep for TTM conversion (Thomas) - Replace IS_GEN and friends with GRAPHICS_VER (Lucas) - Use DEVICE_ATTR_RO macro (Yue) - Static code checker fixes (Zhihao) Signed-off-by:
-
https://git.pengutronix.de/git/lst/linuxDave Airlie authored
- remove redundant NULL checks by various people - fix sparse checker warnings from Marc - expose more GPU ID values to userspace from Christian - add HWDB entry for GPU found on i.MX8MP from Sascha - rework of the linear window calculation to better deal with systems with large regions of reserved RAM Signed-off-by:
-
Inki Dae authored
Use pm_runtime_resume_and_get() instead of pm_runtime_get_sync() to deal with usage counter. pm_runtime_get_sync() increases the usage counter even when it failed, which makes callers to forget to decrease the usage counter and resulted in reference leak. pm_runtime_resume_and_get() function decreases the usage counter when it failed internally so it can avoid the reference leak. Changelog v1: - Fix an build error reported by kernel test robot of Intel. Signed-off-by:
Inki Dae <inki.dae@samsung.com> Reported-by:
kernel test robot <lkp@intel.com>
-
Tian Tao authored
use pm_runtime_resume_and_get() to replace pm_runtime_get_sync and pm_runtime_put_noidle to avoid continuing to increase the refcount when pm_runtime_get_sync fails. Signed-off-by:
Tian Tao <tiantao6@hisilicon.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
- 10 Jun, 2021 11 commits
-
-
Linus Walleij authored
This adds a new driver for the Samsung DB7430 DPI display controller as controlled over SPI. Right now the only panel product we know that is using this display controller is the LMS397KF04 but there may be more. This is the first regular panel driver making use of the MIPI DBI helper library. The DBI "device" portions can not be used because that code assumes the use of a single regulator and specific timings around the reset pulse that do not match the DB7430 datasheet. Cc: Paul Cercueil <paul@crapouillou.net> Cc: Doug Anderson <dianders@chromium.org> Acked-by:
Noralf Trønnes <noralf@tronnes.org> Signed-off-by:
-
Leandro Ribeiro authored
In this patch we add a section to document what userspace should do to find out the CRTC index. This is important as they may be many places in the documentation that need this, so it's better to just point to this section and avoid repetition. Signed-off-by:
Leandro Ribeiro <leandro.ribeiro@collabora.com> Reviewed-by:
Pekka Paalanen <pekka.paalanen@collabora.com> Signed-off-by:
-
Sascha Hauer authored
This is the 3D GPU found on the i.MX8MP SoC. The feature bits are taken from the NXP downstream kernel driver 6.4.3.p1.305572. Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Reviewed-by:
Christian Gmeiner <christian.gmeiner@gmail.com>
-
Thomas Zimmermann authored
Backmerging to pick up the latest TTM patches plus conflict resolution. Signed-off-by: -
Christian König authored
TTMs buffer objects are based on GEM objects for quite a while and rely on initializing those fields before initializing the TTM BO. Nouveau now doesn't init the GEM object for internally allocated BOs, so make sure that we at least initialize some necessary fields. Signed-off-by:
Mikko Perttunen <mperttunen@nvidia.com> Reviewed-by:
Matthew Auld <matthew.auld@intel.com> Reviewed-by:
Huang Rui <ray.huang@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210609172902.1937-1-christian.koenig@amd.com
-
Vivek Kasireddy authored
If the VMM's (Qemu) memory backend is backed up by memfd + Hugepages (hugetlbfs and not THP), we have to first find the hugepage(s) where the Guest allocations are located and then extract the regular 4k sized subpages from them. v2: Ensure that the subpage and hugepage offsets are calculated correctly when the range of subpage allocations cuts across multiple hugepages. v3: Instead of repeatedly looking up the hugepage for each subpage, only do it when the subpage allocation crosses over into a different hugepage. (suggested by Gerd and DW) v4: Fix the following warning identified by checkpatch: CHECK:OPEN_ENDED_LINE: Lines should not end with a '(' Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:Vivek Kasireddy <vivek.kasireddy@intel.com> Signed-off-by:
Dongwon Kim <dongwon.kim@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20210609182915.592743-1-vivek.kasireddy@intel.com [ kraxel: one more checkpatch format tweak ] Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com>
-
Dave Airlie authored
Merge tag 'amd-drm-next-5.14-2021-06-09' of https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.14-2021-06-09: amdgpu: - SR-IOV fixes - Smartshift updates - GPUVM TLB flush updates - 16bpc fixed point display fix for DCE11 - BACO cleanups and core refactoring - Aldebaran updates - Initial Yellow Carp support - RAS fixes - PM API cleanup - DC visual confirm updates - DC DP MST fixes - DC DML fixes - Misc code cleanups and bug fixes amdkfd: - Initial Yellow Carp support radeon: - memcpy_to/from_io fixes UAPI: - Add Yellow Carp chip family id Used internally in the kernel driver and by mesa Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
Cross-subsystem Changes: - x86/gpu: add JasperLake to gen11 early quirks (Although the patch lacks the Ack info, it has been Acked by Borislav) Driver Changes: - General DMC improves (Anusha) - More ADL-P enabling (Vandita, Matt, Jose, Mika, Anusha, Imre, Lucas, Jani, Manasi, Ville, Stanislav) - Introduce MBUS relative dbuf offset (Ville) - PSR fixes and improvements (Gwan, Jose, Ville) - Re-enable LTTPR non-transparent LT mode for DPCD_REV < 1.4 (Ville) - Remove duplicated declarations (Shaokun, Wan) - Check HDMI sink deep color capabilities during .mode_valid (Ville) - Fix display flicker screan related to console and FBC (Chris) - Remaining conversions of GRAPHICS_VER (Lucas) - Drop invalid FIXME (Jose) - Fix bigjoiner check in dsc_disable (Vandita) Signed-off-by:
-
Dave Airlie authored
This fixes 32-bit arm build due to lack of 64-bit divides. Fixes: cb1c8146 ("drm/ttm: flip the switch for driver allocated resources v2") Link: https://patchwork.freedesktop.org/patch/438442/Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
Drop disabling of gfxoff during VCN use. This allows gfxoff to kick in and potentially save power if the user is not using gfx for color space conversion or scaling. VCN1.0 had a bug which prevented it from working properly with gfxoff, so we disabled it while using VCN. That said, most apps today use gfx for scaling and color space conversion rather than overlay planes so it was generally in use anyway. This was fixed on VCN2+, but since we mostly use gfx for color space conversion and scaling and rapidly powering up/down gfx can negate the advantages of gfxoff, we left gfxoff disabled. As more applications use overlay planes for color space conversion and scaling, this starts to be a win, so go ahead and leave gfxoff enabled. Note that VCN1.0 uses vcn_v1_0_idle_work_handler() and vcn_v1_0_ring_begin_use() so they are not affected by this patch. Reviewed-by:
James Zhu <James.Zhu@amd.com> Acked-by:
Boyuan Zhang <Boyuan.Zhang@amd.com> Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for 5.14: UAPI Changes: * drm/panfrost: Export AFBC_FEATURES register to userspace Cross-subsystem Changes: * dma-buf: Fix debug printing; Rename dma_resv_*() functions + changes in callers; Cleanups Core Changes: * Add prefetching memcpy for WC * Avoid circular dependency on CONFIG_FB * Cleanups * Documentation fixes throughout DRM * ttm: Make struct ttm_resource the base of all managers + changes in all users of TTM; Add a generic memcpy for page-based iomem; Remove use of VM_MIXEDMAP; Cleanups Driver Changes: * drm/bridge: Add TI SN65DSI83 and SN65DSI84 + DT bindings * drm/hyperv: Add DRM driver for HyperV graphics output * drm/msm: Fix module dependencies * drm/panel: KD53T133: Support rotation * drm/pl111: Fix module dependencies * drm/qxl: Fixes * drm/stm: Cleanups * drm/sun4i: Be explicit about format modifiers * drm/vc4: Use struct gpio_desc; Cleanups * drm/vgem: Cleanups * drm/vmwgfx: Use ttm_bo_move_null() if there's nothing to copy * fbdev/mach64: Cleanups * fbdev/mb862xx: Use DEVICE_ATTR_RO Signed-off-by:
-
- 09 Jun, 2021 2 commits
-
-
John Harrison authored
The meaning of 'default' for the enable_guc module parameter has been updated to accurately reflect what is supported on current platforms. So start using the defaults instead of forcing everything off. Although, note that right now, the default is for everything to be off anyway. So this is not a change for current platforms. Signed-off-by:
John Harrison <John.C.Harrison@Intel.com> Signed-off-by:
Matthew Brost <matthew.brost@intel.com> Reviewed-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
-
Lyude Paul authored
This adds support for controlling panel backlights over eDP using VESA's standard backlight control interface. Luckily, Nvidia was cool enough to never come up with their own proprietary backlight control interface (at least, not any that I or the laptop manufacturers I've talked to are aware of), so this should work for any laptop panels which support the VESA backlight control interface. Note that we don't yet provide the panel backlight frequency to the DRM DP backlight helpers. This should be fine for the time being, since it's not required to get basic backlight controls working. For reference: there's some mentions of PWM backlight values in nouveau_reg.h, but I'm not sure these are the values we would want to use. If we figure out how to get this information in the future, we'll have the benefit of more granular backlight control. Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Dave Airlie <airlied@gmail.com> Cc: greg.depoire@gmail.com Link: https://patchwork.freedesktop.org/patch/msgid/20210514181504.565252-10-lyude@redhat.com
-
