The recent code refactoring made the mmap of continuous pages to be
done via the own helper snd_dma_continuous_mmap() with
remap_pfn_range().  There I overlooked that dmab->addr isn't set for
the allocation with SNDRV_DMA_TYPE_CONTINUOUS.  This resulted always
in an error at mmap with this buffer type on the system such as
Intel SST Baytrail driver.

This patch fixes the regression by passing the correct address.

Fixes: 30b7ba69 ("ALSA: core: Add continuous and vmalloc mmap ops")
Reported-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/8d6674da-7d7b-803e-acc9-7de6cb1223fa@redhat.com
Link: https://lore.kernel.org/r/20210801113801.31290-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

At the transition to the devres-managed card release, we've put the
check of double-free at trigger_card_release().  But this wasn't
enough, as the code path calls snd_card_free() again, and it would
lead to the doubly snd_card_free() calls.

Actually the v1 patch was correct to handle this, but I forgot that
corner case and moved the check to the more obvious place as I thought
it's clearer.  But, as usual, devils live in details.

This patch corrects the check of the double-free to the right place,
with a bit more comments.

Fixes: e8ad415b ("ALSA: core: Add managed card creation")
Link: https://lore.kernel.org/r/20210731083446.26680-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Prefer using '"%s...", __func__' to get current function's name in
an output message.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Link: https://lore.kernel.org/r/20210731052647.141046-1-wangborong@cdjrlc.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

The snd-dummy driver (fake_buffer configuration) uses the ops->page
callback for the mmap operations. Allow mmap for this case, too.

Cc: <stable@vger.kernel.org>
Fixes: c4824ae7 ("ALSA: pcm: Fix mmap capability check")
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210730090254.612478-1-perex@perex.czSigned-off-by: Takashi Iwai <tiwai@suse.de>

The recent fix for the resume on Lenovo machines seems causing a
regression on others.  It's because the change always triggers the
connector selection no matter which widget node type is.

This patch addresses the regression by setting the resume callback
selectively only for the connector widget.

Fixes: 44609fc0 ("ALSA: usb-audio: Check connector value on resume")
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213897
Link: https://lore.kernel.org/r/20210729185126.24432-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The Acer Swift SF314-42 laptop is using Realtek ALC255 codec. Add a
quirk so microphone in a headset connected via the right-hand side jack
is usable.
Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210721170141.24807-1-amonakov@ispras.ruSigned-off-by: Takashi Iwai <tiwai@suse.de>

MIDI Passthrough sequencer client is assigned always to the fixed
number 14, while it's wrongly documented in the comments as if 62,
which was an old number that was used during development.  Fix all
those numbers.

Link: https://lore.kernel.org/r/20210727105232.7321-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Apparently JBL Quantum 600 has multiple hardware revisions. Apply
registration quirk to another device id as well.
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210727093326.1153366-1-alexander@tsoy.meSigned-off-by: Takashi Iwai <tiwai@suse.de>

The issue on Acer SWIFT SF314-56 is that headset microphone doesn't work.
The following quirk fixed headset microphone issue. The fixup was found by trial and error.
Note that the fixup of SF314-54/55 (ALC256_FIXUP_ACER_HEADSET_MIC) was not successful on my SF314-56.
Signed-off-by: Nikos Liolios <liolios.nk@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210727030510.36292-1-liolios.nk@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

The change to restore the autosuspend from the disabled state uses a
wrong check: namely, it should have been the exact comparison of the
quirk_type instead of the bitwise and (&).  Otherwise it matches
wrongly with the other quirk types.

Although re-enabling the autosuspend for the already enabled device
shouldn't matter much, it's better to fix the unbalanced call.

Fixes: 97991108 ("ALSA: usb-audio: Disable USB autosuspend properly in setup_disable_autosuspend()")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/s5hr1flh9ov.wl-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The following scenario describes an echo test for
Samsung USBC Headset (AKG) with VID/PID (0x04e8/0xa051).

We first start a capture stream(USB IN transfer) in 96Khz/24bit/1ch mode.
In clock find source function, we get value 0x2 for clock selector
and 0x1 for clock source.

Kernel-4.14 behavior
Since clock source is valid so clock selector was not set again.
We pass through this function and start a playback stream(USB OUT transfer)
in 48Khz/32bit/2ch mode. This time we get value 0x1 for clock selector
and 0x1 for clock source. Finally clock id with this setting is 0x9.

Kernel-5.10 behavior
Clock selector was always set one more time even it is valid.
When we start a playback stream, we will get 0x2 for clock selector
and 0x1 for clock source. In this case clock id becomes 0xA.
This is an incorrect clock source setting and results in severe noises.
We see wrong data rate in USB IN transfer.
(From 288 bytes/ms becomes 144 bytes/ms) It should keep in 288 bytes/ms.

This earphone works fine on older kernel version load because
this is a newly-added behavior.

Fixes: d2e8f641 ("ALSA: usb-audio: Explicitly set up the clock selector")
Signed-off-by: chihhao.chen <chihhao.chen@mediatek.com>
Link: https://lore.kernel.org/r/1627100621-19225-1-git-send-email-chihhao.chen@mediatek.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

The values of the line output controls can change when the SW/HW
switches are set to HW, and also when speaker switching is enabled.
These notifications were sent with a mask of only
SNDRV_CTL_EVENT_MASK_INFO. Change the notifications to set the
SNDRV_CTL_EVENT_MASK_VALUE mask bit as well.

When the mute control is updated, the notification was sent with a
mask of SNDRV_CTL_EVENT_MASK_INFO. Change the mask to the correct
value of SNDRV_CTL_EVENT_MASK_VALUE.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/8192e15ba62fa4bc90425c005f265c0de530be20.1626959758.git.g@b4.vuSigned-off-by: Takashi Iwai <tiwai@suse.de>

After the hardware mute button is pressed, private->vol_updated is set
so that the mute status is invalidated. As the channel mute values may
be affected by the global mute value, update scarlett2_mute_ctl_get()
to call scarlett2_update_volumes() if private->vol_updated is set.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/aa18ddbf8d8bd7f31832ab1b6b6057c00b931202.1626959758.git.g@b4.vuSigned-off-by: Takashi Iwai <tiwai@suse.de>

The Direct Monitor control for the 2i2 is an enumerated value, not a
boolean. Fix the control name to say "Playback Enum" instead of
"Playback Switch" in this case.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/faf5de1d2100038e7d07520d770fda4a1adc276a.1626959758.git.g@b4.vuSigned-off-by: Takashi Iwai <tiwai@suse.de>

Append "Playback Switch" to the names of "Mute" and "Dim" controls,
and append "Switch" to the "MSD Mode" control as per
Documentation/sound/designs/control-names.rst.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/77f1000652c37e3217fb8dad8e156bc6392abc0b.1626959758.git.g@b4.vuSigned-off-by: Takashi Iwai <tiwai@suse.de>

These devices has two interfaces, but only the second interface
contains the capture endpoint, thus quirk is required to delay the
registration until the second interface appears.
Tested-by: Jakub Fišer <jakub@ufiseru.cz>
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210721235605.53741-1-alexander@tsoy.meSigned-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-fix-v5.14-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.14

A collection of fixes for ASoC that have come in since the merge window,
all driver specific.  There is a new core feature added for reversing
the order of operations when shutting down, this is needed to fix a bug
with the AMD Stonyridge platform, and we also tweak the Kconfig to make
the SSM2518 driver user selectable so it can be used with generic cards
but that requires no actual code changes.

The recent optimization to store an iomem pointer in card's
private_data field caused sparse warnings.  Although they are
practically harmless, add the explicit cast for avoiding the spurious
warnings.

Fixes: 9b7843d1 ("ALSA: sc6000: Assign vport directly on card's private_data")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/202107210511.SnFqlZMa-lkp@intel.com
Link: https://lore.kernel.org/r/20210720224902.7169-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The recent change for the devres introduced the wrong code shuffling
in the korg1212 firmware loader function that may lead to a bad
pointer access.  Restore the calls in the right order (and put back
the release_firmware() call in the error path, too).

Fixes: b5cde369 ("ALSA: korg1212: Allocate resources with device-managed APIs")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/s5heebsoc26.wl-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The recent code refactoring missed the initialization of the chip
variable as its allocation was moved to card->private_data.
Let's fix it.

Fixes: 21a9314c ("ALSA: als300: Allocate resources with device-managed APIs")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/s5hh7goocid.wl-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The chip variable was forgotten to be initialized properly while
changing the object creation from the own malloc to
card->private_data.  This patch fixes it.

Fixes: 99041fea ("ALSA: cs4281: Allocate resources with device-managed APIs")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/s5him14ocjz.wl-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

sc6000 driver tries to allocate an extra pointer for keeping the vport
address and point it over card->private_data.  But, this indirect
access is utterly superfluous, and we can keep the vport address
directly in card->private_data instead.  This will simply the code and
avoid confusion.

Link: https://lore.kernel.org/r/20210720162837.6026-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Static analysis is warning that the sizeof being used is should be
of *vport and not vport. Although these are the same size it is not
a portable assumption to assume this is true for all cases.  Fix this
by using sizeof(*vport).

Addresses-Coverity: ("Sizeof not portable")
Fixes: 111601ff ("ALSA: sc6000: Allocate resources with device-managed APIs")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210720161707.74197-1-colin.king@canonical.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

On some Intel NUC10 variants, codec reports AC_JACK_PORT_NONE as
pin default config for all pins. This results in broken audio.
Add a quirk to force connectivity.

BugLink: https://github.com/clearlinux/distribution/issues/2396Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210720153216.2200938-1-kai.vehmanen@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Currently the { } braces are missing around an if block causing subsequent
code after the return to become unreachable. Fix this by adding the
missing { }.

Addresses-Coverity: ("Structurally dead code")
Fixes: 2973ee4a ("ALSA: opti9xx: Allocate resources with device-managed APIs")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210720153741.73230-1-colin.king@canonical.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

If pci_request_regions() fails, it should return error
code in snd_nm256_create().
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210720135237.3424521-1-yangyingliang@huawei.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

The recent rewrite of the memory allocation helpers also changed the
page extraction to a common helper, snd_sgbuf_get_page().  But this
assumes implicitly that the buffer was allocated via the standard
helper (usually via preallocation), and didn't consider the case of
the manual buffer handling.

This patch fixes it and also covers the manual buffer management.

Fixes: 37af81c5 ("ALSA: core: Abstract memory alloc helpers")
Link: https://lore.kernel.org/r/20210720092732.12412-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The hw_support_mmap() doesn't cover all memory allocation types and
might use a wrong device pointer for checking the capability.
Check the all memory allocation types more completely.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210720092640.12338-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

We missed the fact that ElkhartLake platforms have two different PCI
IDs. We only added one so the SOF driver is never selected by the
autodetection logic for the missing configuration.

BugLink: https://github.com/thesofproject/linux/issues/2990
Fixes: cc8f81c7 ('ALSA: hda: fix intel DSP config')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210719231746.557325-1-pierre-louis.bossart@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Use the new snd_devm_card_new() for the card object allocation and the
devres version for the input device, and clean up the superfluous
remove callback.

Link: https://lore.kernel.org/r/20210715075941.23332-80-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Use the new snd_devm_card_new() for the card object allocation, and
clean up the superfluous remove callback.

Link: https://lore.kernel.org/r/20210715075941.23332-79-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Use the new snd_devm_card_new() for the card object allocation, and
clean up the superfluous remove callback.

Link: https://lore.kernel.org/r/20210715075941.23332-78-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

This patch converts the card object management with devres as a clean
up.  The remove callback gets reduced by that.

This should give no user-visible functional changes.

Note that this converts only the mpu401 card driver.  The mpu401_uart
component is still managed with snd_device.  It's for the case where
the mpu401_uart component may be removed dynamically without the
actual device unbind.

Link: https://lore.kernel.org/r/20210715075941.23332-77-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

This patch converts the resource management in serial u16550 driver
with devres as a clean up.  Each manual resource management is
converted with the corresponding devres helper, and the card object
release is managed now via card->private_free instead of a lowlevel
snd_device.

This should give no user-visible functional changes.

Link: https://lore.kernel.org/r/20210715075941.23332-76-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

This patch converts the resource management in mtpav driver with
devres as a clean up.  Each manual resource management is converted
with the corresponding devres helper now.

This should give no user-visible functional changes.

Link: https://lore.kernel.org/r/20210715075941.23332-75-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

This patch converts the card object management with devres as a clean
up.  The remove callback gets reduced by that.

This should give no user-visible functional changes.

Link: https://lore.kernel.org/r/20210715075941.23332-74-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

This patch converts the resource management in x86 HDMI LPE audio
driver with devres as a clean up.  Each manual resource management is
converted with the corresponding devres helper now.

Link: https://lore.kernel.org/r/20210715075941.23332-73-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

This patch converts the resource management in ISA wavefront driver
with devres as a clean up.  Each manual resource management is
converted with the corresponding devres helper.  The remove callback
became superfluous and dropped.

This should give no user-visible functional changes.

Link: https://lore.kernel.org/r/20210715075941.23332-72-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

This patch converts the resource management in ISA sscape driver with
devres as a clean up.  Each manual resource management is converted
with the corresponding devres helper.  The remove callback became
superfluous and dropped.

This should give no user-visible functional changes.

Link: https://lore.kernel.org/r/20210715075941.23332-71-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>