As io_kiocb have enough space, move ->work out of a union. It's safer
this way and removes ->work memcpy bouncing.
By the way make tabulation in struct io_kiocb consistent.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Linked requests are hashed, remove a comment stating otherwise. Also
move hash bits to emphasise that we don't carry it through loop
iteration and set it every time.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Whoever called io_prep_linked_timeout() should also do
io_queue_linked_timeout(). __io_queue_sqe() doesn't follow that for the
punting path leaving linked timeouts prepared but never queued.

Fixes: 6df1db6b ("io_uring: fix mis-refcounting linked timeouts")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Remove REQ_F_WORK_INITIALIZED after io_req_clean_work(). That's a cold
path but is safer for those using io_req_clean_work() out of
*dismantle_req()/*io_free(). And for the same reason zero work.fs
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Move io_req_init_async() into io_grab_files(), it's safer this way. Note
that io_queue_async_work() does *init_async(), so it's valid to move out
of __io_queue_sqe() punt path. Also, add a helper around io_grab_files().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Calling into opcode prep handlers may be dangerous, as they re-read
SQE but might not re-initialise requests completely. If io_req_defer()
passed fast checks and is done with preparations, punt it async.

As all other cases are covered with nulling @sqe, this guarantees that
io_[opcode]_prep() are visited only once per request.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

In io_sq_thread(), if there are task works to handle, current codes
will skip schedule() and go on polling sq again, but forget to clear
IORING_SQ_NEED_WAKEUP flag, fix this issue. Also add two helpers to
set and clear IORING_SQ_NEED_WAKEUP flag,
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

As every iopoll request have a task ref, it becomes expensive to put
them one by one, instead we can put several at once integrating that
into io_req_free_batch().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

put_task_struct_many() is as put_task_struct() but puts several
references at once. Useful to batching it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Locked and pinned memory accounting in io_{,un}account_mem() depends on
having ->sqo_mm, which is NULL after a recent change for non SQPOLL'ed
io_ring. That disables the accounting.

Return ->sqo_mm initialisation back, and do __io_sq_thread_acquire_mm()
based on IORING_SETUP_SQPOLL flag.

Fixes: 8eb06d7e ("io_uring: fix missing ->mm on exit")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_sqe_buffer_unregister() uses cxt->sqo_mm for memory accounting, but
io_ring_ctx_free() drops ->sqo_mm before leaving pinned_vm
over-accounted. Postpone mm cleanup for when it's not needed anymore.

Fixes: 30975825 ("io_uring: report pinned memory usage")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Don't implement fast path of kbuf freeing and management inlined into
io_recv{,msg}(), that's error prone and duplicates handling. Replace it
with a helper io_put_recv_kbuf(), which mimics io_put_rw_kbuf() in the
io_read/write().

This also keeps cflags calculation in one place, removing duplication
between rw and recv/send.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Extract a common helper for cleaning up a selected buffer, this will be
used shortly. By the way, correct cflags types to unsigned and, as kbufs
are anyway tracked by a flag, remove useless zeroing req->rw.addr.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Move REQ_F_BUFFER_SELECT flag check out of io_recv_buffer_select(), and
do that in its call sites That saves us from double error checking and
possibly an extra function call.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_clean_op() may be skipped even if there is a selected io_buffer,
that's because *select_buffer() funcions never set REQ_F_NEED_CLEANUP.

Trigger io_clean_op() when REQ_F_BUFFER_SELECTED is set as well, and
and clear the flag if was freed out of it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Instead of returning error from io_recv(), go through generic cleanup
path, because it'll retain cflags for userspace. Do the same for
io_send() for consistency.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

With the return on a bad socket, kmsg is always non-null by the end
of the function, prune left extra checks and initialisations.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Flip over "if (sock)" condition with return on error, the upper layer
will take care. That change will be handy later, but already removes
an extra jump from hot path.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Currently, file refs in struct io_submit_state are tracked with 2 vars:
@has_refs -- how many refs were initially taken
@used_refs -- number of refs used

Replace it with a single variable counting how many refs left at the
current moment.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

RLIMIT_SIZE in needed only for execution from an io-wq context, hence
move all preparations from hot path to io-wq work setup.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Every call to io_req_defer_prep() is prepended with allocating ->io,
just do that in the function. And while we're at it, mark error paths
with unlikey and replace "if (ret < 0)" with "if (ret)".

There is only one change in the observable behaviour, that's instead of
killing the head request right away on error, it postpones it until the
link is assembled, that looks more preferable.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

A switch in __io_clean_op() doesn't have default, it's pointless to list
opcodes that doesn't do any cleanup. Remove IORING_OP_OPEN* from there.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The only caller of io_req_work_grab_env() is io_prep_async_work(), and
they are both initialising req->work. Inline grab_env(), it's easier
to keep this way, moreover there already were bugs with misplacing
io_req_init_async().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

req->cflags is used only for defer-completion path, just use completion
data to store it. With the 4 bytes from the ->sequence patch and
compacting io_kiocb, this frees 8 bytes.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

req->sequence is used only for deferred (i.e. DRAIN) requests, but
initialised for every request. Remove req->sequence from io_kiocb
together with its initialisation in io_init_req().

Replace it with a new field in struct io_defer_entry, that will be
calculated only when needed in io_req_defer(), which is a slow path.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The only left user of req->list is DRAIN, hence instead of keeping a
separate per request list for it, do that with old fashion non-intrusive
lists allocated on demand. That's a really slow path, so that's OK.

This removes req->list and so sheds 16 bytes from io_kiocb.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

poll*() doesn't use req->list, don't init it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Instead of using shared req->list, hang timeouts up on their own list
entry. struct io_timeout have enough extra space for it, but if that
will be a problem ->inflight_entry can reused for that.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

As with the completion path, also use compl.list for overflowed
requests. If cleaned up properly, nobody needs per-op data there
anymore.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

req->inflight_entry is used to track requests that grabbed files_struct.
Let's share it with iopoll list, because the only iopoll'ed ops are
reads and writes, which don't need a file table.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

It supports both polling and I/O polling. Rename ctx->poll to clearly
show that it's only in I/O poll case.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Calling io_req_complete(req) means that the request is done, and there
is nothing left but to clean it up. That also means that per-op data
after that should not be used, so we're free to reuse it in completion
path, e.g. to store overflow_list as done in this patch.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

As for import_iovec(), return !=NULL iovec from io_import_iovec() only
when it should be freed. That includes returning NULL when iovec is
already in req->io, because it should be deallocated by other means,
e.g. inside op handler. After io_setup_async_rw() local iovec to ->io,
just mark it NULL, to follow the idea in io_{read,write} as well.

That's easier to follow, and especially useful if we want to reuse
per-op space for completion data.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
[axboe: only call kfree() on non-NULL pointer]
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Preparing reads/writes for async is a bit tricky. Extract a helper to
not repeat it twice.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Don't deref req->io->rw every time, but put it in a local variable. This
looks prettier, generates less instructions, and doesn't break alias
analysis.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_kiocb::task_work was de-unionised, and is not planned to be shared
back, because it's too useful and commonly used. Hence, instead of
keeping a separate task_work in struct io_async_rw just reuse
req->task_work.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Don't repeat send msg initialisation code, it's error prone.
Extract and use a helper function.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

send/recv msghdr initialisation works with struct io_async_msghdr, but
pulls the whole struct io_async_ctx for no reason. That complicates it
with composite accessing, e.g. io->msg.

Use and pass the most specific type, which is struct io_async_msghdr.
It is the larget field in union io_async_ctx and doesn't save stack
space, but looks clearer.
The most of the changes are replacing "io->msg." with "iomsg->"
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Every second field in send/recv is called msg, make it a bit more
understandable by renaming ->msg, which is a user provided ptr,
to ->umsg.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

rings_size() sets sq_offset to the total size of the rings (the returned
value which is used for memory allocation). This is wrong: sq array should
be located within the rings, not after them. Set sq_offset to where it
should be.

Fixes: 75b28aff ("io_uring: allocate the two rings together")
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Hristo Venev <hristo@venev.name>
Cc: io-uring@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>