Loongson-3A6000 and newer processors have hardware page table walker
(PTW) support. PTW can handle all fastpaths of TLBI/TLBL/TLBS/TLBM
exceptions by hardware, software only need to handle slowpaths (page
faults).

BTW, PTW doesn't append _PAGE_MODIFIED for page table entries, so we
change pmd_dirty() and pte_dirty() to also check _PAGE_DIRTY for the
"dirty" attribute.
Signed-off-by: Liang Gao <gaoliang@loongson.cn>
Signed-off-by: Jun Yi <yijun@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Traditionally, LoongArch uses "dbar 0" (full completion barrier) for
everything. But the full completion barrier is a performance killer, so
Loongson-3A6000 and newer processors have made finer granularity hints
available:

Bit4: ordering or completion (0: completion, 1: ordering)
Bit3: barrier for previous read (0: true, 1: false)
Bit2: barrier for previous write (0: true, 1: false)
Bit1: barrier for succeeding read (0: true, 1: false)
Bit0: barrier for succeeding write (0: true, 1: false)

Hint 0x700: barrier for "read after read" from the same address, which
is needed by LL-SC loops on old models (dbar 0x700 behaves the same as
nop if such reordering is disabled on new models).

This patch makes use of the various new hints for different kinds of
memory barriers. It brings performance improvements on Loongson-3A6000
series, while not affecting the existing models because all variants are
treated as 'dbar 0' there.

Why override queued_spin_unlock()?
After commit 01e3b958 ("drivers: Remove explicit invocations
of mmiowb()") we need a completion barrier in queued_spin_unlock(), but
the generic implementation use smp_store_release() which only provide an
ordering barrier.
Signed-off-by: Jun Yi <yijun@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Loongson-3A6000 has SMT (Simultaneous Multi-Threading) support, each
physical core has two logical cores (threads). This patch add SMT probe
and scheduler support via ACPI PPTT.

If SCHED_SMT enabled, Loongson-3A6000 is treated as 4 cores, 8 threads;
If SCHED_SMT disabled, Loongson-3A6000 is treated as 8 cores, 8 threads.

Remove smp_num_siblings to support HMP (Heterogeneous Multi-Processing).
Signed-off-by: Liupu Wang <wangliupu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Add LoongArch's vector extensions support, which including 128bit LSX
(i.e., Loongson SIMD eXtension) and 256bit LASX (i.e., Loongson Advanced
SIMD eXtension).

Linux kernel doesn't use vector itself, it only handle exceptions and
context save/restore. So it only needs a subset of these instructions:

* Vector load/store:   vld vst vldx vstx xvld xvst xvldx xvstx
* 8bit-elements move:  vpickve2gr.b xvpickve2gr.b vinsgr2vr.b xvinsgr2vr.b
* 16bit-elements move: vpickve2gr.h xvpickve2gr.h vinsgr2vr.h xvinsgr2vr.h
* 32bit-elements move: vpickve2gr.w xvpickve2gr.w vinsgr2vr.w xvinsgr2vr.w
* 64bit-elements move: vpickve2gr.d xvpickve2gr.d vinsgr2vr.d xvinsgr2vr.d
* Elements permute:    vpermi.w vpermi.d xvpermi.w xvpermi.d xvpermi.q

Introduce AS_HAS_LSX_EXTENSION and AS_HAS_LASX_EXTENSION to avoid non-
vector toolchains complains unsupported instructions.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

We can see that "Time namespaces are not supported" on LoongArch:

(1) clone3 test
  # cd tools/testing/selftests/clone3 && make && ./clone3
  ...
  # Time namespaces are not supported
  ok 18 # SKIP Skipping clone3() with CLONE_NEWTIME
  # Totals: pass:17 fail:0 xfail:0 xpass:0 skip:1 error:0

(2) timens test
  # cd tools/testing/selftests/timens && make && ./timens
  ...
  1..0 # SKIP Time namespaces are not supported

On LoongArch the current kernel does not support CONFIG_TIME_NS which
depends on GENERIC_VDSO_TIME_NS, select GENERIC_VDSO_TIME_NS to enable
CONFIG_TIME_NS to build kernel/time/namespace.c.

Additionally, it needs to define some arch-dependent functions for the
timens, such as __arch_get_timens_vdso_data(), arch_get_vdso_data() and
vdso_join_timens().

At the same time, modify the layout of vvar to use one page size for
generic vdso data, expand another page size for timens vdso data and
assign LOONGARCH_VDSO_DATA_SIZE (maybe exceeds a page size if expand in
the future) for loongarch vdso data, at last add the callback function
vvar_fault() and modify stack_top().

With this patch under CONFIG_TIME_NS:

(1) clone3 test
  # cd tools/testing/selftests/clone3 && make && ./clone3
  ...
  ok 18 [739] Result (0) matches expectation (0)
  # Totals: pass:18 fail:0 xfail:0 xpass:0 skip:0 error:0

(2) timens test
  # cd tools/testing/selftests/timens && make && ./timens
  ...
  # Totals: pass:10 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

The LoongArch kernel is 64-bit and built with the soft-float ABI,
hence the loongarch64-linux-gnusf target. (The "libc" part can affect
the codegen of libcalls: other arches do not use a bare-metal target,
and currently the only fully supported libc on LoongArch is glibc
anyway.)

See: https://lore.kernel.org/loongarch/CAKwvOdnimxv8oJ4mVY74zqtt1x7KTMrWvn2_T9x22SFDbU6rHQ@mail.gmail.com/Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Confirmed working with QEMU system emulation.
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

This is a port of commit 08f6554f ("mips: Include KBUILD_CPPFLAGS in
CHECKFLAGS invocation") to arch/loongarch, for fixing cross-compilation
of Linux/LoongArch with Clang, where previously the `--target` flag
would no longer be present for the CHECKFLAGS cc invocation leading to
build failure.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://github.com/ClangBuiltLinux/linux/issues/1787#issuecomment-1608306002Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

This is a port of commit 76d7fff2 ("MIPS: VDSO: Use CLANG_FLAGS
instead of filtering out '--target='") to arch/loongarch, for fixing
cross-compilation with Clang.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://github.com/ClangBuiltLinux/linux/issues/1787#issuecomment-1608306002Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Now the arch code is mostly ready for LLVM/Clang consumption, it is time
to re-organize the CFLAGS a little to actually enable the LLVM build.
Namely, all -G0 switches from CFLAGS are removed, and -mexplicit-relocs
and -mdirect-extern-access are now wrapped with cc-option (with the
related asm/percpu.h definition guarded against toolchain combos that
are known to not work).

A build with !RELOCATABLE && !MODULE is confirmed working within a QEMU
environment; support for the two features are currently blocked on
LLVM/Clang, and will come later.

Why -G0 can be removed:

In GCC, -G stands for "small data threshold", that instructs the
compiler to put data smaller than the specified threshold in a dedicated
"small data" section (called .sdata on LoongArch and several other
arches).

However, benefiting from this would require ABI cooperation, which is
not the case for LoongArch; and current GCC behave the same whether -G0
(equal to disabling this optimization) is given or not. So, remove -G0
from CFLAGS altogether for one less thing to care about. This also
benefits LLVM/Clang compatibility where the -G switch is not supported.

Why -mexplicit-relocs can now be conditionally applied without
regressions:

Originally -mexplicit-relocs is unconditionally added to CFLAGS in case
of CONFIG_AS_HAS_EXPLICIT_RELOCS, because not having it (i.e. old GCC +
new binutils) would not work: modules will have R_LARCH_ABS_* relocs
inside, but given the rarity of such toolchain combo in the wild, it may
not be worthwhile to support it, so support for such relocs in modules
were not added back when explicit relocs support was upstreamed, and
-mexplicit-relocs is unconditionally added to fail the build early.

Now that Clang compatibility is desired, given Clang is behaving like
-mexplicit-relocs from day one but without support for the CLI flag, we
must ensure the flag is not passed in case of Clang. However, explicit
compiler flavor checks can be more brittle than feature detection: in
this case what actually matters is support for __attribute__((model))
when building modules. Given neither older GCC nor current Clang support
this attribute, probing for the attribute support and #error'ing out
would allow proper UX without checking for Clang, and also automatically
work when Clang support for the attribute is to be added in the future.

Why -mdirect-extern-access is now conditionally applied:

This is actually a nice-to-have optimization that can reduce GOT
accesses, but not having it is harmless either. Because Clang does not
support the option currently, but might do so in the future, conditional
application via cc-option ensures compatibility with both current and
future Clang versions.

Suggested-by: Xi Ruoyao <xry111@xry111.site> # cc-option changes
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

The invtlb instruction has been supported by upstream LoongArch
toolchains from day one, so ditch the raw opcode trickery and just use
plain inline asm for it.

While at it, also make the invtlb asm statements barriers, for proper
modeling of the side effects. The functions are also marked as
__always_inline instead of just "inline", because they cannot work at
all if not inlined: the op argument will not be compile-time const in
that case, thus failing to satisfy the "i" constraint.

The signature of the other more specific invtlb wrappers contain unused
arguments right now, but these are not removed right away in order for
the patch to be focused. In the meantime, assertions are added to ensure
no accidental misuse happens before the refactor. (The more specific
wrappers cannot re-use the generic invtlb wrapper, because the ISA
manual says $zero shall be used in case a particular op does not take
the respective argument: re-using the generic wrapper would mean losing
control over the register usage.)
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

In addition to less visual clutter, this also makes Clang happy
regarding the const-ness of arguments. In the original approach, all
Clang gets to see is the incoming arguments whose const-ness cannot be
proven without first being inlined; so Clang errors out here while GCC
is fine.

While at it, tweak several printk format strings because the return type
of csr_read64 becomes effectively unsigned long, instead of unsigned
long long.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

The GNU assembler (as of 2.40) mis-treats FCSR operands as GPRs, but
the LLVM IAS does not. Probe for this and refer to FCSRs as "$fcsrNN"
if support is present.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

When the kernel is compiled with LLVM, the register names being handled
during exception fixup building are ABI names instead of bare $rNN
style. Add mapping for the ABI names for LLVM compatibility.
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Taking the address delta between symbols in different sections is not
supported by the LLVM IAS. Instead, do this in the linker script, so
the same data can be properly referenced in assembly.
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: WANG Xuerui <git@xen0n.name>
[chenhuacai: Fix build with !CONFIG_EFI_STUB]
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Add guard for the larch_insn_gen_xxx functions to verify whether the
immediate operand is within the acceptable range.
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Debugfs functions are not supposed to be checked for errors.  This
is sort of unusual but it is described in the comments for the
debugfs_create_dir() function.  Also debugfs_create_dir() can never
return NULL.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

ACPI systems set io masters by parsing ACPI MADT, FDT systems have no
MADT so we explicitly set CPU#0 as the io master. Otherwise CPU#0 will
be considered as hotpluggable.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

LoongArch architecture changes for 6.5 depend on the irq changes
to work on both ACPI and FDT systems, so merge them to create a base.

Pull i2c fixes from Wolfram Sang:
 "Nothing fancy. Two driver and one DT binding fix"

* tag 'i2c-for-6.4-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: imx-lpi2c: fix type char overflow issue when calculating the clock cycle
  i2c: qup: Add missing unwind goto in qup_i2c_probe()
  dt-bindings: i2c: opencores: Add missing type for "regstep"

Pull perf fixes from Borislav Petkov:

 - Drop the __weak attribute from a function prototype as it otherwise
   leads to the function getting replaced by a dummy stub

 - Fix the umask value setup of the frontend event as former is
   different on two Intel cores

* tag 'perf_urgent_for_v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel: Fix the FRONTEND encoding on GNR and MTL
  perf/core: Drop __weak attribute from arch_perf_update_userpage() prototype

Pull objtool fix from Borislav Petkov:

 - Add a ORC format hash to vmlinux and modules in order for other tools
   which use it, to detect changes to it and adapt accordingly

* tag 'objtool_urgent_for_v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/unwind/orc: Add ELF section with ORC version identifier

Pull x86 fixes from Borislav Petkov:

 - Do not use set_pgd() when updating the KASLR trampoline pgd entry
   because that updates the user PGD too on KPTI builds, resulting in
   memory corruption

 - Prevent a panic in the IO-APIC setup code due to conflicting command
   line parameters

* tag 'x86_urgent_for_v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apic: Fix kernel panic when booting with intremap=off and x2apic_phys
  x86/mm: Avoid using set_pgd() outside of real PGD pages

Pull drm fixes from Dave Airlie:
 "Very quiet last week, just two misc fixes, one dp-mst and one qaic:

  qaic:
   - dma-buf import fix

  dp-mst:
   - fix NULL ptr deref"

[ It turns out it was a quiet week because Alex Deucher hadn't sent in
  his pending AMD changes. So they are coming next    - Linus ]

* tag 'drm-fixes-2023-06-23' of git://anongit.freedesktop.org/drm/drm:
  drm: use mgr->dev in drm_dbg_kms in drm_dp_add_payload_part2
  accel/qaic: Call DRM helper function to destroy prime GEM

Pull ARM SoC fixes from Arnd Bergmann:
 "The final bug fixes for Qualcomm and Rockchips came in, all of them
  for devicetree files:

   - Devices on Qualcomm SC7180/SC7280 that are cache coherent are now
     marked so correctly to fix a regression after a change in kernel
     behavior

   - Rockchips has a few minor changes for correctness of regulator and
     cache properties, as well as fixes for incorrect behavior of the
     RK3568 PCI controller and reset pins on two boards"

* tag 'arm-fixes-6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  arm64: dts: qcom: sc7280: Mark SCM as dma-coherent for chrome devices
  arm64: dts: qcom: sc7180: Mark SCM as dma-coherent for trogdor
  arm64: dts: qcom: sc7180: Mark SCM as dma-coherent for IDP
  dt-bindings: firmware: qcom,scm: Document that SCM can be dma-coherent
  arm64: dts: rockchip: Fix rk356x PCIe register and range mappings
  arm64: dts: rockchip: fix button reset pin for nanopi r5c
  arm64: dts: rockchip: fix nEXTRST on SOQuartz
  arm64: dts: rockchip: add missing cache properties
  arm64: dts: rockchip: fix USB regulator on ROCK64

Pull btrfs fix from David Sterba:
 "Unfortunately the recent u32 overflow fix was not complete, there was
  one conversion left, assertion not triggered by my tests but caught by
  Qu's fstests case.

  The "cleanup for later" has been promoted to a proper fix and wraps
  all uses of the stripe left shift so the diffstat has grown but leaves
  no potentially problematic uses.

  We should have done it that way before, sorry"

* tag 'for-6.4-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix remaining u32 overflows when left shifting stripe_nr

Pull block fix from Jens Axboe:
 "It's apparently the week of 'fixup something from last week', because
  the same is true for this block pull request.

  Fix up a lock grab that needs to be IRQ saving, rather than just IRQ
  disabling, in the block cgroup code"

* tag 'block-6.4-2023-06-23' of git://git.kernel.dk/linux:
  block: make sure local irq is disabled when calling __blkcg_rstat_flush

Pull iommu fix from Joerg Roedel:

 - Fix potential memory leak in AMD IOMMU domain allocation path

* tag 'iommu-fix-v6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/amd: Fix possible memory leak of 'domain'

Pull sound fixes from Takashi Iwai:
 "Three oneliner fixes: one for a thinko in SOF SoundWire code and two
  HD-audio quirks for ASUS laptops. All device-specific and should be
  safe to apply"

* tag 'sound-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek: Add quirk for ASUS ROG GV601V
  ALSA: hda/realtek: Add quirk for ASUS ROG G634Z
  ASoC: intel: sof_sdw: Fixup typo in device link checking

Pull gpio fixes from Bartosz Golaszewski:

 - fix IRQ initialization in gpiochip_irqchip_add_domain()

 - add a missing return value check for platform_get_irq() in
   gpio-sifive

 - don't free irq_domains which GPIOLIB does not manage

* tag 'gpio-fixes-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpiolib: Fix irq_domain resource tracking for gpiochip_irqchip_add_domain()
  gpio: sifive: add missing check for platform_get_irq
  gpiolib: Fix GPIO chip IRQ initialization restriction

Merge tag 'qcom-arm64-fixes-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes

One last Qualcomm ARM64 DeviceTree fix for v6.4

Changes related to cache management for DMA memory caused WiFi to stop
work on SC7180 and SC7280 based products, using TF-A. These changes
marks the relevant device dma-coherent to correct the behavior.

* tag 'qcom-arm64-fixes-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  arm64: dts: qcom: sc7280: Mark SCM as dma-coherent for chrome devices
  arm64: dts: qcom: sc7180: Mark SCM as dma-coherent for trogdor
  arm64: dts: qcom: sc7180: Mark SCM as dma-coherent for IDP
  dt-bindings: firmware: qcom,scm: Document that SCM can be dma-coherent

Link: https://lore.kernel.org/r/20230622203248.106422-1-andersson@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Dave Airlie reports that gcc-13.1.1 has started complaining about some
of the workqueue code in 32-bit arm builds:

  kernel/workqueue.c: In function ‘get_work_pwq’:
  kernel/workqueue.c:713:24: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
    713 |                 return (void *)(data & WORK_STRUCT_WQ_DATA_MASK);
        |                        ^
  [ ... a couple of other cases ... ]

and while it's not immediately clear exactly why gcc started complaining
about it now, I suspect it's some C23-induced enum type handlign fixup in
gcc-13 is the cause.

Whatever the reason for starting to complain, the code and data types
are indeed disgusting enough that the complaint is warranted.

The wq code ends up creating various "helper constants" (like that
WORK_STRUCT_WQ_DATA_MASK) using an enum type, which is all kinds of
confused.  The mask needs to be 'unsigned long', not some unspecified
enum type.

To make matters worse, the actual "mask and cast to a pointer" is
repeated a couple of times, and the cast isn't even always done to the
right pointer, but - as the error case above - to a 'void *' with then
the compiler finishing the job.

That's now how we roll in the kernel.

So create the masks using the proper types rather than some ambiguous
enumeration, and use a nice helper that actually does the type
conversion in one well-defined place.

Incidentally, this magically makes clang generate better code.  That,
admittedly, is really just a sign of clang having been seriously
confused before, and cleaning up the typing unconfuses the compiler too.
Reported-by: Dave Airlie <airlied@gmail.com>
Link: https://lore.kernel.org/lkml/CAPM=9twNnV4zMCvrPkw3H-ajZOH-01JVh_kDrxdPYQErz8ZTdA@mail.gmail.com/
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Claim clkhi and clklo as integer type to avoid possible calculation
errors caused by data overflow.

Fixes: a55fa9d0 ("i2c: imx-lpi2c: add low power i2c bus driver")
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Smatch Warns:
	drivers/i2c/busses/i2c-qup.c:1784 qup_i2c_probe()
	warn: missing unwind goto?

The goto label "fail_runtime" and "fail" will disable qup->pclk,
but here qup->pclk failed to obtain, in order to be consistent,
change the direct return to goto label "fail_dma".

Fixes: 9cedf3b2 ("i2c: qup: Add bam dma capabilities")
Signed-off-by: Shuai Jiang <d202180596@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Cc: <stable@vger.kernel.org> # v4.6+

"regstep" may be deprecated, but it still needs a type.

Fixes: 8ad69f49 ("dt-bindings: i2c: convert ocores binding to yaml")
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

drm-misc-fixes for v6.4:
- Qaic imported dma-buf fix.
- Fix null pointer deref when printing a dp-mst message.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <dev@lankhorst.se>
Link: https://patchwork.freedesktop.org/patch/msgid/e96b1965-ba67-7cc5-2358-826eb5b9b998@lankhorst.se

Pull networking fixes from Paolo Abeni:
 "Including fixes from ipsec, bpf, mptcp and netfilter.

  Current release - regressions:

   - netfilter: add NFT_TRANS_PREPARE_ERROR to deal with bound set/chain

   - eth: mlx5e:
      - fix scheduling of IPsec ASO query while in atomic
      - free IRQ rmap and notifier on kernel shutdown

  Current release - new code bugs:

   - phy: manual remove LEDs to ensure correct ordering

  Previous releases - regressions:

   - mptcp: fix possible divide by zero in recvmsg()

   - dsa: revert "net: phy: dp83867: perform soft reset and retain
     established link"

  Previous releases - always broken:

   - sched: netem: acquire qdisc lock in netem_change()

   - bpf:
      - fix verifier id tracking of scalars on spill
      - fix NULL dereference on exceptions
      - accept function names that contain dots

   - netfilter: disallow element updates of bound anonymous sets

   - mptcp: ensure listener is unhashed before updating the sk status

   - xfrm:
      - add missed call to delete offloaded policies
      - fix inbound ipv4/udp/esp packets to UDPv6 dualstack sockets

   - selftests: fixes for FIPS mode

   - dsa: mt7530: fix multiple CPU ports, BPDU and LLDP handling

   - eth: sfc: use budget for TX completions

  Misc:

   - wifi: iwlwifi: add support for SO-F device with PCI id 0x7AF0"

* tag 'net-6.4-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (74 commits)
  revert "net: align SO_RCVMARK required privileges with SO_MARK"
  net: wwan: iosm: Convert single instance struct member to flexible array
  sch_netem: acquire qdisc lock in netem_change()
  selftests: forwarding: Fix race condition in mirror installation
  wifi: mac80211: report all unusable beacon frames
  mptcp: ensure listener is unhashed before updating the sk status
  mptcp: drop legacy code around RX EOF
  mptcp: consolidate fallback and non fallback state machine
  mptcp: fix possible list corruption on passive MPJ
  mptcp: fix possible divide by zero in recvmsg()
  mptcp: handle correctly disconnect() failures
  bpf: Force kprobe multi expected_attach_type for kprobe_multi link
  bpf/btf: Accept function names that contain dots
  Revert "net: phy: dp83867: perform soft reset and retain established link"
  net: mdio: fix the wrong parameters
  netfilter: nf_tables: Fix for deleting base chains with payload
  netfilter: nfnetlink_osf: fix module autoload
  netfilter: nf_tables: drop module reference after updating chain
  netfilter: nf_tables: disallow timeout for anonymous sets
  netfilter: nf_tables: disallow updates of anonymous sets
  ...

Pull kvm fixes from Paolo Bonzini:
 "ARM:

   - Correctly save/restore PMUSERNR_EL0 when host userspace is using
     PMU counters directly

   - Fix GICv2 emulation on GICv3 after the locking rework

   - Don't use smp_processor_id() in kvm_pmu_probe_armpmu(), and
     document why

  Generic:

   - Avoid setting page table entries pointing to a deleted memslot if a
     host page table entry is changed concurrently with the deletion"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: Avoid illegal stage2 mapping on invalid memory slot
  KVM: arm64: Use raw_smp_processor_id() in kvm_pmu_probe_armpmu()
  KVM: arm64: Restore GICv2-on-GICv3 functionality
  KVM: arm64: PMU: Don't overwrite PMUSERENR with vcpu loaded
  KVM: arm64: PMU: Restore the host's PMUSERENR_EL0

Pull powerpc fix from Michael Ellerman:

 - Disable IRQs when switching mm in exit_lazy_flush_tlb() called from
   exit_mmap()

Thanks to Nicholas Piggin and Sachin Sant.

* tag 'powerpc-6.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s/radix: Fix exit lazy tlb mm switch with irqs enabled