- 05 May, 2020 30 commits
-
-
Grygorii Strashko authored
It's possible to have build configuration which will force PTP_1588_CLOCK=m and so TI_K3_AM65_CPTS=m while still have TI_K3_AM65_CPSW_NUSS=y. This will cause build failures: aarch64-linux-gnu-ld: ../drivers/net/ethernet/ti/am65-cpsw-nuss.o: in function `am65_cpsw_init_cpts': ../drivers/net/ethernet/ti/am65-cpsw-nuss.c:1685: undefined reference to `am65_cpts_create' aarch64-linux-gnu-ld: ../drivers/net/ethernet/ti/am65-cpsw-nuss.c:1685:(.text+0x2e20): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `am65_cpts_create' Fix it by adding dependencies from CPTS in TI_K3_AM65_CPSW_NUSS as below: config TI_K3_AM65_CPSW_NUSS ... depends on TI_K3_AM65_CPTS || !TI_K3_AM65_CPTS Note. This will create below dependencies and for NFS boot + CPTS all of them have to be built-in. PTP_1588_CLOCK -> TI_K3_AM65_CPTS -> TI_K3_AM65_CPSW_NUSS While here, clean up TI_K3_AM65_CPTS definition. Fixes: b1f66a5b ("net: ethernet: ti: am65-cpsw-nuss: enable packet timestamping support") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reported-by: Anders Roxell <anders.roxell@linaro.org> Tested-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
William Tu authored
The Type I ERSPAN frame format is based on the barebones IP + GRE(4-byte) encapsulation on top of the raw mirrored frame. Both type I and II use 0x88BE as protocol type. Unlike type II and III, no sequence number or key is required. To creat a type I erspan tunnel device: $ ip link add dev erspan11 type erspan \ local 172.16.1.100 remote 172.16.1.200 \ erspan_ver 0 Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
There is no need to cast a typed pointer to a void pointer when calling a function that accepts the latter. Remove it, as the cast prevents further compiler checks. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Karsten Graul says: ==================== smc: log state changes and cleanup Patch 1 adds the logging of important state changes to enable SMC-R users to detect SMC-R link groups that are not redundant and require user actions. Patch 2 is a contribution to clean up an unused inline function. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
YueHaibing authored
commit bac6de7b ("net/smc: eliminate cursor read and write calls") left behind this. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Karsten Graul authored
Print to system log when SMC links are available or go down, link group state changes or pnetids are applied to and removed from devices. The log entries are triggered by either user configuration actions or adapter activation/deactivation events and are not expected to happen often. The entries help SMC users to keep track of the SMC link group status and to detect when actions are needed (like to add replacements for failed adapters). Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Grygorii Strashko authored
Fix dt_binding_check fail: Fix Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml: $id: relative path/filename doesn't match actual path or filename expected: http://devicetree.org/schemas/net/ti,k3-am654-cpts.yaml# Unknown file referenced: [Errno 2] No such file or directory: '/usr/local/lib/python3.6/dist-packages/dtschema/schemas/net/ti,am654-cpts.yaml' Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml: $id: relative path/filename doesn't match actual path or filename expected: http://devicetree.org/schemas/net/ti,k3-am654-cpts.yaml# Unknown file referenced: [Errno 2] No such file or directory: '/usr/local/lib/python3.6/dist-packages/dtschema/schemas/net/ti,am654-cpts.yaml' Cc: Rob Herring <robh@kernel.org> Fixes: 6e87ac74 ("dt-binding: ti: am65x: document common platform time sync cpts module") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
YueHaibing authored
Remove duplicated include. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Suggested by Cong Wang. Signed-off-by: David S. Miller <davem@davemloft.net>
-
YueHaibing authored
There's no callers in-tree Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
YueHaibing authored
commit 05cc5a39 ("bnx2x: add vlan filtering offload") left behind this, remove it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
YueHaibing authored
There's no callers in-tree anymore since commit 5952fde1 ("net: sched: choke: remove dead filter classify code") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
YueHaibing authored
There's no callers in-tree. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
YueHaibing authored
commit 4ca3221f ("myri10ge: Convert from LRO to GRO") left behind this, remove it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
YueHaibing authored
There's no caller in-tree since commit 2af6106a ("net: stmmac: Introducing support for Page Pool") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
YueHaibing authored
commit 84411f73 ("net: mv643xx_eth: Avoid setting the initial TCP checksum") left behind this, remove it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
YueHaibing authored
There's no callers in-tree anymore. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
YueHaibing authored
There's no callers in-tree anymore. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yunjian Wang authored
The method ndo_start_xmit() returns a value of type netdev_tx_t. Fix the ndo function to use the correct type. Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason Yan authored
Fix the following coccicheck warning: drivers/net/ethernet/ti/cpsw_new.c:1924:2-17: WARNING: Assignment of 0/1 to bool variable drivers/net/ethernet/ti/cpsw_new.c:1231:1-16: WARNING: Assignment of 0/1 to bool variable Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason Yan authored
Fix the following coccicheck warning: drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c:1991:5-46: WARNING: Comparison to bool drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c:1993:10-54: WARNING: Comparison to bool drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c:2380:5-38: WARNING: Comparison to bool Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason Yan authored
Fix the following coccicheck warning: drivers/net/ethernet/agere/et131x.c:717:3-22: WARNING: Assignment of 0/1 to bool variable drivers/net/ethernet/agere/et131x.c:721:1-20: WARNING: Assignment of 0/1 to bool variable Signed-off-by: Jason Yan <yanaijie@huawei.com> Acked-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason Yan authored
No need to convert '==' expression to bool. This fixes the following coccicheck warning: drivers/net/ethernet/atheros/atl1c/atl1c_main.c:1189:63-68: WARNING: conversion to bool not needed here Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason Yan authored
Fix the following coccicheck warning: drivers/net/ethernet/qlogic/qede/qede_main.c:1717:5-19: WARNING: Assignment of 0/1 to bool variable Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason Yan authored
Fix the following coccicheck warning: drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c:1548:17-31: WARNING: Comparison to bool drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c:1148:16-24: WARNING: Comparison to bool drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c:1158:30-38: WARNING: Comparison to bool Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason Yan authored
Fix the following coccicheck warning: drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c:1585:3-25: WARNING: Assignment of 0/1 to bool variable drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c:1588:3-25: WARNING: Assignment of 0/1 to bool variable Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yunjian Wang authored
The method ndo_start_xmit() returns a value of type netdev_tx_t. Fix the ndo function to use the correct type. Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yunjian Wang authored
The method ndo_start_xmit() returns a value of type netdev_tx_t. Fix the ndo function to use the correct type. Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yunjian Wang authored
The method ndo_start_xmit() returns a value of type netdev_tx_t. Fix the ndo function to use the correct type. Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yunjian Wang authored
The method ndo_start_xmit() returns a value of type netdev_tx_t. Fix the ndo function to use the correct type. And emac_start_xmit() can leak one skb if 'channel' == 3. Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 04 May, 2020 10 commits
-
-
David S. Miller authored
Cong Wang says: ==================== net: reduce dynamic lockdep keys syzbot has been complaining about low MAX_LOCKDEP_KEYS for a long time, it is mostly because we register 4 dynamic keys per network device. This patchset reduces the number of dynamic lockdep keys from 4 to 1 per netdev, by reverting to the previous static keys, except for addr_list_lock which still has to be dynamic. The second patch removes a bonding-specific key by the way. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Cong Wang authored
After commit b3e80d44 ("bonding: fix lockdep warning in bond_get_stats()") the dynamic key is no longer necessary, as we compute nest level at run-time. So, we can just remove it to save some lockdep key entries. Test commands: ip link add bond0 type bond ip link add bond1 type bond ip link set bond0 master bond1 ip link set bond0 nomaster ip link set bond1 master bond0 Reported-and-tested-by: syzbot+aaa6fa4949cc5d9b7b25@syzkaller.appspotmail.com Cc: Dmitry Vyukov <dvyukov@google.com> Acked-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Cong Wang authored
This patch reverts the folowing commits: commit 064ff66e "bonding: add missing netdev_update_lockdep_key()" commit 53d37497 "net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key()" commit 1f26c0d3 "net: fix kernel-doc warning in <linux/netdevice.h>" commit ab92d68f "net: core: add generic lockdep keys" but keeps the addr_list_lock_key because we still lock addr_list_lock nestedly on stack devices, unlikely xmit_lock this is safe because we don't take addr_list_lock on any fast path. Reported-and-tested-by: syzbot+aaa6fa4949cc5d9b7b25@syzkaller.appspotmail.com Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Grygorii Strashko says: ==================== net: ethernet: ti: k3: introduce common platform time sync driver - cpts This series introduced support for significantly upgraded TI A65x/J721E Common platform time sync (CPTS) modules which are part of AM65xx Time Synchronization Architecture [1]. The TI A65x/J721E now contain more than one CPTS instance: - MCU CPSW CPTS (IEEE 1588 compliant) - Main NAVSS CPTS (central) - PCIe CPTS(s) (PTM compliant) - J721E: Main CPSW9g CPTS (IEEE 1588 compliant) which can work as separately as interact to each other through Time Sync Router (TSR) and Compare Event Router (CER). In addition there are also ICSS-G IEP blocks which can perform similar timsync functions, but require FW support. More info also available in TRM [2][3]. Not all above modules are available to the Linux by as of now as some of them are reserved for RTOS/FW purposes. The scope of this submission is TI A65x/J721E CPSW CPTS and Main NAVSS CPTS, and TSR was used for testing purposes. +---------------------------+ | MCU CPSW | +-------------------+ +------------------------+ | TS | | Main Navss CPTS | | Time Sync Router (TSR) | | +-------------+ | | | | | | | | | | HW1_TS +<----------+ | | +--------v-----+ +--+--+ | | | | | | CPTS | |Port | | ... | | | X+-->HW1_TS | | | | HW8_TS <------------<---------+ | X|-->HW2_TS | +--^--+ | | | | +--------------->HW3_TS | | | | | | | +--------------->HW4_TS | | | | | | | | | | | | | | | | | | | | | | | | Genf0 +-----------> (A)---------+ +<--------------+Genf0 | | | | | | | | | | | | | | ... | | +-----------> <---------------+Genf1 ESTf+-------+ | | | | | | | | | | | | | | +--------------+ | | Genf8 +---------->+ | | | | | | SYNC0 ... SYNC3 | | | +-------------------+ +------+------------+----+ +---------------------------+ + + X X (A) shows possible routing path for MCU CPSW CPTS Genf0 signal as an example. Main features of the new TI A65x/J721E CPTS modules are: - 64-bit timestamp/counter mode support in ns by using add_val - implemented in HW PPM and nudge adjustment. - control of time sync events via interrupt or polling - selection of multiple external reference clock sources - hardware timestamp of ext. inputs events (HWx_TS_PUSH) - periodic generator function outputs (TS_GENFx) - (CPSW only) Ethernet Enhanced Scheduled Traffic Operations (CPTS_ESTFn), which drives TSN schedule - timestamping of all RX packets bypassing CPTS FIFO Patch 1 - DT bindings Patch 2 - the AM65x/J721E driver Patch 3 - enables packet timestamping support in TI AM65x/J721E MCU CPSW driver. Patches 4-7 - DT updates. === PTP Testing: phc2sys -s CLOCK_REALTIME -c eth0 -m -O 0 -u30 phc2sys[627.331]: eth0 rms 409912446712787392 max 1587584079521858304 freq -6665 +/- 35040 delay 832 +/- 27 phc2sys[657.335]: eth0 rms 33 max 66 freq -0 +/- 28 delay 820 +/- 30 phc2sys[687.339]: eth0 rms 37 max 70 freq -1 +/- 32 delay 830 +/- 29 phc2sys[717.343]: eth0 rms 33 max 71 freq -0 +/- 29 delay 828 +/- 23 phc2sys[747.346]: eth0 rms 35 max 75 freq -0 +/- 31 delay 829 +/- 26 phc2sys[777.350]: eth0 rms 37 max 68 freq -1 +/- 32 delay 825 +/- 25 phc2sys[807.354]: eth0 rms 28 max 57 freq -1 +/- 25 delay 824 +/- 21 phc2sys[837.358]: eth0 rms 43 max 81 freq -1 +/- 37 delay 836 +/- 23 phc2sys[867.361]: eth0 rms 33 max 74 freq +0 +/- 29 delay 828 +/- 24 phc2sys[897.365]: eth0 rms 35 max 77 freq -2 +/- 30 delay 824 +/- 25 phc2sys[927.369]: eth0 rms 28 max 50 freq +0 +/- 25 delay 825 +/- 25 ptp4l -P -2 -H -i eth0 -l 6 -m -q -p /dev/ptp1 -f ptp.cfg -s ptp4l[22095.754]: port 1: MASTER to UNCALIBRATED on RS_SLAVE ptp4l[22097.754]: port 1: UNCALIBRATED to SLAVE on MASTER_CLOCK_SELECTED ptp4l[22159.757]: rms 317 max 1418 freq +79 +/- 186 delay 410 +/- 1 ptp4l[22223.760]: rms 9 max 24 freq +42 +/- 12 delay 409 +/- 1 ptp4l[22287.763]: rms 10 max 28 freq +41 +/- 11 delay 410 +/- 1 ptp4l[22351.767]: rms 10 max 26 freq +34 +/- 12 delay 410 +/- 1 ptp4l[22415.770]: rms 10 max 26 freq +49 +/- 14 delay 410 +/- 1 === Ext. HW_TS and Genf testing: For testing purposes Time Sync Router (TSR) can be modeled in DT as pin controller + timesync_router: timesync_router@A40000 { + compatible = "pinctrl-single"; + reg = <0x0 0xA40000 0x0 0x800>; + #address-cells = <1>; + #size-cells = <0>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x800007ff>; + }; then signals routing can be done in board file, for example: +#define TS_OFFSET(pa, val) (0x4+(pa)*4) (0x80000000 | val) + +×ync_router { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_cpts>; + + /* Example of the timesync routing */ + mcu_cpts: mcu_cpts { + pinctrl-single,pins = < + /* [cpts genf1] in13 -> out25 [cpts hw4_push] */ + TS_OFFSET(25, 13) + /* [cpts genf1] in13 -> out0 [main cpts hw1_push] */ + TS_OFFSET(0, 13) + /* [main cpts genf0] in4 -> out1 [main cpts hw2_push] */ + TS_OFFSET(1, 4) + /* [main cpts genf0] in4 -> out24 [cpts hw3_push] */ + TS_OFFSET(24, 4) + >; + }; +}; will create link: cpsw cpts Genf1 -> main cpts hw1_push -> cpsw cpts hw4_push main cpts Genf0 -> main cpts hw2_push -> cpsw cpts hw3_push testptp -d /dev/ptp0 -i 0 -p 1000000000 periodic output request okay testptp -d /dev/ptp0 -i 1 -e 5 external time stamp request okay event index 1 at 22583.000000025 event index 1 at 22584.000000025 event index 1 at 22585.000000025 event index 1 at 22586.000000025 event index 1 at 22587.000000025 testptp -d /dev/ptp1 -i 2 -e 5 external time stamp request okay event index 2 at 1587606764.249304554 event index 2 at 1587606765.249304467 event index 2 at 1587606766.249304380 event index 2 at 1587606767.249304293 event index 2 at 1587606768.249304206 [1] https://www.ti.com/lit/pdf/spracp7 [2] https://www.ti.com/lit/pdf/sprz452 [3] https://www.ti.com/lit/pdf/spruil1 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Grygorii Strashko authored
Add DT node for Main NAVSS CPTS module. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Grygorii Strashko authored
Add DT node for The TI J721E MCU CPSW CPTS which is part of MCU CPSW NUSS. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Grygorii Strashko authored
Add DT node for Main NAVSS CPTS module. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Grygorii Strashko authored
Add DT node for the TI AM65x SoC Common Platform Time Sync (CPTS). Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Grygorii Strashko authored
The MCU CPSW Common Platform Time Sync (CPTS) provides possibility to timestamp TX PTP packets and all RX packets. This enables corresponding support in TI AM65x/J721E MCU CPSW driver. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Grygorii Strashko authored
The CPTS module is used to facilitate host control of time sync operations. Main features of CPTS module are: - selection of multiple external clock sources - control of time sync events via interrupt or polling - 64-bit timestamp mode in ns with HW PPM and nudge adjustment. - hardware timestamp ext. inputs (HWx_TS_PUSH) - timestamp Generator function outputs (TS_GENFx) Depending on integration it enables compliance with the IEEE 1588-2008 standard for a precision clock synchronization protocol, Ethernet Enhanced Scheduled Traffic Operations (CPTS_ESTFn) and PCIe Subsystem Precision Time Measurement (PTM). Introduced driver provides Linux PTP hardware clock for each CPTS device and network packets timestamping where applicable. CPTS PTP hardware clock supports following operations: - Set time - Get time - Shift the clock by a given offset atomically - Adjust clock frequency - Time stamp external events - Periodic output signals Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-