Instead of using legacy suspend/resume methods, using newer
dev_pm_ops structure allows better control over power management.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

dev_err()/dev_info() are more preferred than pr_err()/pr_info().
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Use the wrapper functions for getting and setting the driver data using
platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev,
so we can directly pass a struct platform_device.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Use devm_gpio_request_one() to make cleanup paths simpler.
Also, GPIOF_DIR_OUT | GPIOF_INIT_LOW is replaced with
GPIOF_OUT_INIT_LOW.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Use devm_gpio_request_one() to make cleanup paths simpler.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Use devm_clk_get() to make cleanup paths more simple.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Commit 0998d063 (device-core: Ensure drvdata = NULL when no
driver is bound) removes the need to set driver data field to
NULL.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Use devm_clk_get() to make cleanup paths more simple.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Use devm_clk_get() to make cleanup paths more simple.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Use devm_clk_get() to make cleanup paths more simple.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

'dw_wdt_write' is used only in this file. Make it static.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Use devm_clk_get() to make cleanup paths more simple.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Use devm_*() functions to make cleanup paths simpler.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Use the wrapper functions for getting and setting the driver data using
platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev,
so we can directly pass a struct platform_device.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Use devm_kzalloc() to make cleanup paths simpler.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Use devm_ioremap_nocache() functions to make cleanup paths simpler.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Use devm_*() functions to make cleanup paths simpler.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Use devm_ioremap() to make cleanup paths simpler.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Use devm_ioremap_nocache() to make cleanup paths simpler.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Commit 0998d063 (device-core: Ensure drvdata = NULL when no
driver is bound) removes the need to set driver data field to
NULL.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Use devm_*() functions to make cleanup paths simpler.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

This reverts commit d2aae847.

It is completely and utterly broken.  Module install should not build
any files, and adding broken dependencies to "help" it build files is
complete and utter sh*t.

The kernel should not be built by root, and "make install" and "make
module_install" (that for obvious reasons need to be run as root)
absolutely must not build any files.  They should only ever copy the
already-built files over.

So having dependencies for the install targets is wrong, wrong, wrong.

If you try to install a kernel without building it first, you *should*
get errors. The build system shouldn't try to help root build the files.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull more KVM changes from Gleb Natapov:
 "A fix for a bug that prevents some guests from working on old Intel
  CPUs and a patch that integrates ARM64 KVM, merged via ARM64 tree,
  into Kconfig."

* tag 'kvm-3.11-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: VMX: mark unusable segment as nonpresent
  arm64: KVM: Kconfig integration

Pull Sparc bugfixes from David Miller:
 "Four bug fixes:

   1) Enable snoop tags properly on Sparc32/LEON, from Andreas Larsson

   2) strcpy() length check fix from Chen Gang.

   3) Forgotten unregister_netdev() in sunvnet driver, from Dave
      Kleikamp.

   4) Fix broken assembler offsets used in vm_area_struct accesses on
      sparc32, from Olivier DANET."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  [PATCH] sparc32: vm_area_struct access for old Sun SPARCs.
  sunvnet: vnet_port_remove must call unregister_netdev
  sparc32, leon: Require separate snoop tags set to regard snooping to be enabled
  arch: sparc: kernel: check the memory length before use strcpy().

Pull IDE updates from David Miller:
 "Just a few small things:

   1) module_platform_driver_probe() conversions from Jingoo Han.

   2) module_pci_driver() conversion from Libo Chen.

   3) PIO size calculation fix from Steven J Hill"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide:
  ide: Fix IDE PIO size calculation
  drivers/ide/delkin_cb: Convert to module_pci_driver
  ide: gayle: use module_platform_driver_probe()
  ide: tx4939ide: use module_platform_driver_probe()
  ide: tx4938ide: use module_platform_driver_probe()

Pull printk locking fix from Thomas Gleixner:
 "A single lock ordering fix in the printk code"

* 'core-printk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  printk: Fix rq->lock vs logbuf_lock unlock lock inversion

Merge more patches from Andrew Morton:
 "The rest of MM"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm: remove free_area_cache
  zswap: add documentation
  zswap: add to mm/
  zbud: add to mm/

Since all architectures have been converted to use vm_unmapped_area(),
there is no remaining use for the free_area_cache.
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add the documentation file for the zswap functionality
Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Dan Magenheimer <dan.magenheimer@oracle.com>
Cc: Robert Jennings <rcj@linux.vnet.ibm.com>
Cc: Jenifer Hopper <jhopper@us.ibm.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Larry Woodman <lwoodman@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: Joe Perches <joe@perches.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: Hugh Dickens <hughd@google.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zswap is a thin backend for frontswap that takes pages that are in the
process of being swapped out and attempts to compress them and store
them in a RAM-based memory pool.  This can result in a significant I/O
reduction on the swap device and, in the case where decompressing from
RAM is faster than reading from the swap device, can also improve
workload performance.

It also has support for evicting swap pages that are currently
compressed in zswap to the swap device on an LRU(ish) basis.  This
functionality makes zswap a true cache in that, once the cache is full,
the oldest pages can be moved out of zswap to the swap device so newer
pages can be compressed and stored in zswap.

This patch adds the zswap driver to mm/
Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Dan Magenheimer <dan.magenheimer@oracle.com>
Cc: Robert Jennings <rcj@linux.vnet.ibm.com>
Cc: Jenifer Hopper <jhopper@us.ibm.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Larry Woodman <lwoodman@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: Joe Perches <joe@perches.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: Hugh Dickens <hughd@google.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zbud is an special purpose allocator for storing compressed pages.  It
is designed to store up to two compressed pages per physical page.
While this design limits storage density, it has simple and
deterministic reclaim properties that make it preferable to a higher
density approach when reclaim will be used.

zbud works by storing compressed pages, or "zpages", together in pairs
in a single memory page called a "zbud page".  The first buddy is "left
justifed" at the beginning of the zbud page, and the last buddy is
"right justified" at the end of the zbud page.  The benefit is that if
either buddy is freed, the freed buddy space, coalesced with whatever
slack space that existed between the buddies, results in the largest
possible free region within the zbud page.

zbud also provides an attractive lower bound on density.  The ratio of
zpages to zbud pages can not be less than 1.  This ensures that zbud can
never "do harm" by using more pages to store zpages than the
uncompressed zpages would have used on their own.

This implementation is a rewrite of the zbud allocator internally used
by zcache in the driver/staging tree.  The rewrite was necessary to
remove some of the zcache specific elements that were ingrained
throughout and provide a generic allocation interface that can later be
used by zsmalloc and others.

This patch adds zbud to mm/ for later use by zswap.
Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Dan Magenheimer <dan.magenheimer@oracle.com>
Cc: Robert Jennings <rcj@linux.vnet.ibm.com>
Cc: Jenifer Hopper <jhopper@us.ibm.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Larry Woodman <lwoodman@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dave Hansen <dave@sr71.net>
Cc: Joe Perches <joe@perches.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: Hugh Dickens <hughd@google.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull coccinelle updates from Michal Marek:
 "The misc branch is reserved for Coccinelle this time:

   - 'report' is the default mode
   - MAINTAINERS update for Coccinelle
   - documentation udate
   - use new option format for spatch(1)
   - J=<n> variable to mimic make -j for coccicheck
   - check for missing pci_free_consistent() calls

  There are some patches for rpm-pkg and deb-pkg waiting for the
  3.12-rc1 merge window"

* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  Coccinelle: Update information about the minimal version required
  Coccinelle: Update the options used to the new option scheme
  scripts: Coccinelle script for pci_free_consistent()
  Coccinelle: Update the documentation
  Coccinelle: Update section of MAINTAINERS
  coccicheck: span checks across CPUs
  scripts/coccinelle: check for field address argument to kfree
  Coccinelle: Update the Coccinelle section of MAINTAINERS
  Coccinelle: Make 'report' the default mode

Pull kconfig updates from Michal Marek:
 - dependency solver fix for make defconfig
 - randconfig fixes, one of which had to be reverted again
 - more user-friendly sorting of search results
 - hex and range keywords support longs
 - fix for [mn]conf not to rely on particular behavior of the LINES and
   COLS variables
 - cleanup of magic constants in kconfig/lxdialog
 - [mn]conf formatting fixes
 - fix for scripts/config's help text in out-of-tree usage (under a
   different name)

* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kconfig: allow "hex" and "range" to support longs
  Revert "kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG"
  kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG
  kconfig: loop as long as we changed some symbols in randconfig
  kconfig/[mn]conf: make it explicit in the search box that a regexp is possible
  kconfig: sort found symbols by relevance
  kconfig/conf: print the seed used to initialise the RNG for randconfig
  kconfig/conf: accept a base-16 seed for randconfig
  kconfig/conf: fix randconfig setting multiple symbols in a choice
  scripts/config: replace hard-coded script name by a dynamic value
  mconf/nconf: mark empty menus/menuconfigs different from non-empty ones
  nconf: use function calls instead of ncurses' variables LINES and COLS
  mconf: use function calls instead of ncurses' variables LINES and COLS
  kconfig/lxdialog: handle newline characters in print_autowrap()
  kconfig/lxdialog: Use new mininimum resize definitions in conf_choice()
  kconfig/lxdialog: Add definitions for mininimum (re)size values
  kconfig: Fix defconfig when one choice menu selects options that another choice menu depends on

Pull kbuild updates from Michal Marek:
 - fix for make headers_install argv explosion with too long path
 - scripts/setlocalversion does not call git update-index needlessly
 - fix for the src.rpm produced by make rpm-pkg.  The new make
   image_name can be useful also for other packaging tools.
 - scripts/mod/devicetable-offsets.o is not rebuilt during each make run
 - make modules_install dependency fix
 - scripts/sortextable portability fix
 - fix for kbuild to generate the output directory for all object files
   in subdirs.
 - a couple of minor fixes

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild: create directory for dir/file.o
  tools/include: use stdint types for user-space byteshift headers
  Makefile: Fix install error with make -j option
  Fix a build warning in scripts/mod/file2alias.c
  improve modalias building
  scripts/mod: Spelling s/DEVICEVTABLE/DEVICETABLE/
  kbuild: fix error when building from src rpm
  scripts/setlocalversion on write-protected source tree
  Makefile.lib: align DTB quiet_cmd
  kbuild: fix make headers_install when path is too long

Pull perf fixes from Ingo Molnar:
 "Two small fixlets"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Fix interrupt handler timing harness
  perf/x86/amd: Do not print an error when the device is not present

Pull module updates from Rusty Russell:
 "Nothing interesting.  Except the most embarrassing bugfix ever.  But
  let's ignore that"

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  module: cleanup call chain.
  module: do percpu allocation after uniqueness check.  No, really!
  modules: don't fail to load on unknown parameters.
  ABI: Clarify when /sys/module/MODULENAME is created
  There is no /sys/parameters
  module: don't modify argument of module_kallsyms_lookup_name()

Pull virtio updates from Rusty Russell:
 "No real surprises"

* tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  MAINTAINERS: add tools/virtio/ under virtio
  tools/virtio: move module license stub to module.h
  virtio: include asm/barrier explicitly
  virtio: VIRTIO_F_ANY_LAYOUT feature
  lguest: fix example launcher compilation for broken glibc headers.
  virtio-net: fix the race between channels setting and refill
  tools/lguest: real barriers.
  tools/lguest: fix missing rmb().
  virtio_balloon: leak_balloon(): only tell host if we got pages deflated
  virtio-pci: fix leaks of msix_affinity_masks
  Fix comment typo "CONFIG_PAE"

Pull vfio updates from Alex Williamson:
 "Largely hugepage support for vfio/type1 iommu and surrounding cleanups
  and fixes"

* tag 'vfio-v3.11' of git://github.com/awilliam/linux-vfio:
  vfio/type1: Fix leak on error path
  vfio: Limit group opens
  vfio/type1: Fix missed frees and zero sized removes
  vfio: fix documentation
  vfio: Provide module option to disable vfio_iommu_type1 hugepage support
  vfio: hugepage support for vfio_iommu_type1
  vfio: Convert type1 iommu to use rbtree

Pull vhost fixes and cleanups from Michael S Tsirkin:
 "This includes some fixes and cleanups for vhost net and scsi drivers"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vhost/test: update test after vhost cleanups
  vhost: Make local function static
  vhost: Make vhost a separate module
  vhost-scsi: Rename struct tcm_vhost_cmd *tv_cmd to *cmd
  vhost-scsi: Rename struct tcm_vhost_tpg *tv_tpg to *tpg
  vhost-scsi: Make func indention more consistent
  vhost-scsi: Rename struct vhost_scsi *s to *vs
  vhost-scsi: Remove unnecessary forward struct vhost_scsi declaration
  vhost: Simplify dev->vqs[i] access
  vhost-net: fix use-after-free in vhost_net_flush

Pull IOMMU updates from Joerg Roedel:
 "A few updates this time, most important and exiciting (to me) is:

   - The new ARM SMMU driver.  This is a common IOMMU driver that will
     hopefully be used in a lot of upcoming ARM chips.  So the mess in
     the past where every SOC had its own IOMMU will be over.

  Besides that:

   - Some important fixes in the IOMMU unmap path.  There are fixes in
     the common code and also in the AMD IOMMU driver.
   - Other random fixes"

* tag 'iommu-updates-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  MAINTAINERS: add entry for ARM system MMU driver
  iommu/arm: Add support for ARM Ltd. System MMU architecture
  documentation/iommu: Add description of ARM System MMU binding
  iommu: Use %pa and %zx instead of casting
  iommu/amd: Only unmap large pages from the first pte
  iommu: Fix compiler warning on pr_debug
  iommu/amd: Fix memory leak in free_pagetable
  iommu: Split iommu_unmaps
  iommu/{vt-d,amd}: Remove multifunction assumption around grouping
  iommu/omap: fix checkpatch warnings in omap iommu code
  iommu/omap: fix printk formats for dma_addr_t
  iommu/vt-d: DMAR reporting table needs at least one DRHD
  iommu/vt-d: Downgrade the warning if enabling irq remapping fails