- 31 Mar, 2022 1 commit
-
-
Maxime Ripard authored
The DRM_UT_STATE controls whether we're calling drm_atomic_print_new_state() whenever a new state is committed. However, that call is made in the drm_mode_atomic_ioctl(), whereas we have multiple users of the drm_atomic_commit() function in the kernel (framebuffer emulation, drm_atomic_helper_dirtyfb, etc.). This leads to multiple states being committed but never actually displayed even though we asked to have verbose atomic state debugging. Let's move the call to drm_atomic_print_new_state() to drm_atomic_commit() to make sure we don't miss any. Non-blocking commits were never logged though, and it would create too much churn in the logs to do so, so leave them out for now. Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://lore.kernel.org/r/20220328124304.2309418-2-maxime@cerno.tech
-
- 30 Mar, 2022 1 commit
-
-
Matthias Kaehlcke authored
Two digits are swapped in the AUO B133UAN01 panel id (0x8495 instead of 0x8594). This went initially unnoticed because the panel is still detected, though it is set up with a conservative default timing. Fix the digit swap. Fixes: ec57376f ("drm/panel-edp: Add AUO B133UAN01") Signed-off-by:
Matthias Kaehlcke <mka@chromium.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
- 29 Mar, 2022 18 commits
-
-
Matthias Kaehlcke authored
Add support for the AUO B133UAN01 13.3" WUXGA panel. Signed-off-by:
-
Jani Nikula authored
Reduce the size of the function that actually modifies the EDID. Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Emil Velikov <emil.l.velikov@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/437c3c79f68d1144444fb2dd18a678f3aa97272c.1648477901.git.jani.nikula@intel.com
-
Jani Nikula authored
With this, the remaining non-const parts are the ones that actually modify the EDID, for example to fix corrupt EDID. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Jani Nikula authored
Finalize detailed timing parsing constness by making struct edid also const in callbacks and closure. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Jani Nikula authored
Constify the first level of struct edid in detailed timing parsing. Also switch to struct edid instead of u8. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Jani Nikula authored
Moving one level higher, constify struct detailed_timing pointers in callbacks. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Jani Nikula authored
Start constifying the struct detailed_timing pointers being passed around from bottom up. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Jani Nikula authored
Use struct detailed_timing member access instead of direct offsets to avoid casting. Use BUILD_BUG_ON() for sanity check. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Jani Nikula authored
Use struct detailed_timing member access instead of direct offsets to avoid casting. Use BUILD_BUG_ON() for sanity check. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Jani Nikula authored
Use struct member access instead of direct offsets to avoid a cast. Use BUILD_BUG_ON() for sanity check. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Jani Nikula authored
Use struct member access instead of direct offsets to avoid lots of casts all over the place. Use BUILD_BUG_ON() for sanity check. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Jani Nikula authored
The reduced blanking bit is valid only for CVT, indicated by display range limits flags 0x04. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Jani Nikula authored
We'll want to keep the EDID immutable while parsing. Stop modifying the EDID because of the quirks. In theory, this does have userspace implications, but the userspace is supposed to use the modes exposed via KMS API, not by parsing the EDID directly. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Xiaomeng Tong authored
The bug is here: if (!encoder) { The list iterator value 'encoder' will *always* be set and non-NULL by list_for_each_entry(), so it is incorrect to assume that the iterator value will be NULL if the list is empty or no element is found. To fix the bug, use a new variable 'iter' as the list iterator, while use the original variable 'encoder' as a dedicated pointer to point to the found element. Cc: stable@vger.kernel.org Fixes: ec9eab09 ("drm/tilcdc: Add drm bridge support for attaching drm bridge drivers") Signed-off-by:Xiaomeng Tong <xiam0nd.tong@gmail.com> Reviewed-by:
Jyri Sarha <jyri.sarha@iki.fi> Tested-by:
-
Xiaomeng Tong authored
The bug is here: return crtc; The list iterator value 'crtc' will *always* be set and non-NULL by list_for_each_entry(), so it is incorrect to assume that the iterator value will be NULL if the list is empty or no element is found. To fix the bug, return 'crtc' when found, otherwise return NULL. Cc: stable@vger.kernel.org fixes: 89c78134 ("gma500: Add Poulsbo support") Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220327052028.2013-1-xiam0nd.tong@gmail.com
-
Christian König authored
We have the BO pointer in the base structure now as well. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20220321132601.2161-6-christian.koenig@amd.com
-
Christian König authored
Instead of providing the bulk move structure for each LRU update set this as property of the BO. This should avoid costly bulk move rebuilds with some games under RADV. v2: some name polishing, add a few more kerneldoc words. v3: add some lockdep v4: fix bugs, handle pin/unpin as well v5: improve kerneldoc Signed-off-by:
-
Christian König authored
Those functions are going to become more complex, don't inline them any more. Signed-off-by:
-
- 28 Mar, 2022 9 commits
-
-
Xiaomeng Tong authored
The bug is here: return encoder; The list iterator value 'encoder' will *always* be set and non-NULL by drm_for_each_encoder_mask(), so it is incorrect to assume that the iterator value will be NULL if the list is empty or no element found. Otherwise it will bypass some NULL checks and lead to invalid memory access passing the check. To fix this bug, just return 'encoder' when found, otherwise return NULL. Cc: stable@vger.kernel.org Fixes: 12885ecb ("drm/nouveau/kms/nvd9-: Add CRC support") Signed-off-by:
Lyude Paul <lyude@redhat.com> [Changed commit title] Signed-off-by:
-
Christian König authored
Not just TT and VRAM. Signed-off-by:
-
Christian König authored
Instead of duplicating that at different places add an iterator over all the resources in a resource manager. v2: add lockdep annotation and kerneldoc v3: fix various bugs pointed out by Felix v4: simplify the code a bit more Signed-off-by:
Felix Kuehling <Felix.Kuehling@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220321132601.2161-2-christian.koenig@amd.com
-
Christian König authored
This way we finally fix the problem that new resource are not immediately evict-able after allocation. That has caused numerous problems including OOM on GDS handling and not being able to use TTM as general resource manager. v2: stop assuming in ttm_resource_fini that res->bo is still valid. v3: cleanup kerneldoc, add more lockdep annotation v4: consistently use res->num_pages Signed-off-by:
-
Andrey Grodzovsky authored
Fixes the warning. Signed-off-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220328132532.406572-1-andrey.grodzovsky@amd.com
-
Xin Ji authored
As downstream sink was set into standby mode while bridge disabled, this patch used for setting downstream sink into normal status while enable bridge. Signed-off-by:
Xin Ji <xji@analogixsemi.com> Reviewed-by:
Pin-Yen Lin <treapking@chromium.org> Signed-off-by:
Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220322080213.1487134-1-xji@analogixsemi.com
-
Ivaylo Dimitrov authored
On devices with DMM, all allocations are done through either DMM or TILER. DMM/TILER being a limited resource means that such allocations will start to fail before actual free memory is exhausted. What is even worse is that with time DMM/TILER space gets fragmented to the point that even if we have enough free DMM/TILER space and free memory, allocation fails because there is no big enough free block in DMM/TILER space. Such failures can be easily observed with OMAP xorg DDX, for example - starting few GUI applications (so buffers for their windows are allocated) and then rotating landscape<->portrait while closing and opening new windows soon results in allocation failures. Fix that by mapping buffers through DMM/TILER only when really needed, like, for scanout buffers. Signed-off-by:
Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/1642587791-13222-4-git-send-email-ivo.g.dimitrov.75@gmail.com
-
Ivaylo Dimitrov authored
Currently code allocates non-scanout BOs from SHMEM and those objects are accessible to userspace by mmap(). However, on devices with no DMM (like OMAP3), the same objects are not accessible by kernel drivers that want to render to them as code refuses to export them. In turn this means that on devices with no DMM, all buffers must be allocated as scanout, otherwise only CPU can access them. On those devices, scanout buffers are allocated from CMA, making those allocations highly unreliable. Fix that by implementing functionality to export SHMEM backed buffers on devices with no DMM. This makes CMA memory only being used when needed, instead for every buffer that has to be off-CPU rendered. Tested on Motorola Droid4 and Nokia N900 Signed-off-by:
-
Ivaylo Dimitrov authored
Move tiler related code to its own function. Signed-off-by:
-
- 25 Mar, 2022 3 commits
-
-
Cong Liu authored
qxl use ioremap to map ram_header and rom, in the arm64 implementation, the device is mapped as DEVICE_nGnRE, it can not support unaligned access. and qxl is a virtual device, it can be treated more like RAM than actual MMIO registers. use ioremap_wc() replace it. Signed-off-by:
Cong Liu <liucong2@kylinos.cn> Acked-by:
Gerd Hoffmann <kraxel@redhat.com>
-
Rob Clark authored
With native userspace drivers in guest, a lot of GEM objects need to be neither shared nor mappable. And in fact making everything mappable and/or sharable results in unreasonably high fd usage in host VMM. Signed-off-by:
Rob Clark <robdclark@chromium.org> Reviewed-by:
Chia-I Wu <olvaffe@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20220219170301.545432-1-robdclark@gmail.comSigned-off-by:
-
Liu Zixian authored
drm_cvt_mode may return NULL and we should check it. This bug is found by syzkaller: FAULT_INJECTION stacktrace: [ 168.567394] FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 1 [ 168.567403] CPU: 1 PID: 6425 Comm: syz Kdump: loaded Not tainted 4.19.90-vhulk2201.1.0.h1035.kasan.eulerosv2r10.aarch64 #1 [ 168.567406] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 168.567408] Call trace: [ 168.567414] dump_backtrace+0x0/0x310 [ 168.567418] show_stack+0x28/0x38 [ 168.567423] dump_stack+0xec/0x15c [ 168.567427] should_fail+0x3ac/0x3d0 [ 168.567437] __should_failslab+0xb8/0x120 [ 168.567441] should_failslab+0x28/0xc0 [ 168.567445] kmem_cache_alloc_trace+0x50/0x640 [ 168.567454] drm_mode_create+0x40/0x90 [ 168.567458] drm_cvt_mode+0x48/0xc78 [ 168.567477] virtio_gpu_conn_get_modes+0xa8/0x140 [virtio_gpu] [ 168.567485] drm_helper_probe_single_connector_modes+0x3a4/0xd80 [ 168.567492] drm_mode_getconnector+0x2e0/0xa70 [ 168.567496] drm_ioctl_kernel+0x11c/0x1d8 [ 168.567514] drm_ioctl+0x558/0x6d0 [ 168.567522] do_vfs_ioctl+0x160/0xf30 [ 168.567525] ksys_ioctl+0x98/0xd8 [ 168.567530] __arm64_sys_ioctl+0x50/0xc8 [ 168.567536] el0_svc_common+0xc8/0x320 [ 168.567540] el0_svc_handler+0xf8/0x160 [ 168.567544] el0_svc+0x10/0x218 KASAN stacktrace: [ 168.567561] BUG: KASAN: null-ptr-deref in virtio_gpu_conn_get_modes+0xb4/0x140 [virtio_gpu] [ 168.567565] Read of size 4 at addr 0000000000000054 by task syz/6425 [ 168.567566] [ 168.567571] CPU: 1 PID: 6425 Comm: syz Kdump: loaded Not tainted 4.19.90-vhulk2201.1.0.h1035.kasan.eulerosv2r10.aarch64 #1 [ 168.567573] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 168.567575] Call trace: [ 168.567578] dump_backtrace+0x0/0x310 [ 168.567582] show_stack+0x28/0x38 [ 168.567586] dump_stack+0xec/0x15c [ 168.567591] kasan_report+0x244/0x2f0 [ 168.567594] __asan_load4+0x58/0xb0 [ 168.567607] virtio_gpu_conn_get_modes+0xb4/0x140 [virtio_gpu] [ 168.567612] drm_helper_probe_single_connector_modes+0x3a4/0xd80 [ 168.567617] drm_mode_getconnector+0x2e0/0xa70 [ 168.567621] drm_ioctl_kernel+0x11c/0x1d8 [ 168.567624] drm_ioctl+0x558/0x6d0 [ 168.567628] do_vfs_ioctl+0x160/0xf30 [ 168.567632] ksys_ioctl+0x98/0xd8 [ 168.567636] __arm64_sys_ioctl+0x50/0xc8 [ 168.567641] el0_svc_common+0xc8/0x320 [ 168.567645] el0_svc_handler+0xf8/0x160 [ 168.567649] el0_svc+0x10/0x218 Signed-off-by:
Liu Zixian <liuzixian4@huawei.com> Link: http://patchwork.freedesktop.org/patch/msgid/20220322091730.1653-1-liuzixian4@huawei.comSigned-off-by:
-
- 24 Mar, 2022 8 commits
-
-
Maxime Ripard authored
In addition to the RGB444 output, the BCM2711 HDMI controller supports the YUV444 and YUV422 output formats. Let's add support for them in the driver, but still use RGB as the preferred format. Signed-off-by:
-
Maxime Ripard authored
Currently we take the max_bpc property as the bpc value and do not try anything else. However, what the other drivers seem to be doing is that they would try with the highest bpc allowed by the max_bpc property and the hardware capabilities, test if it results in an acceptable configuration, and if not decrease the bpc and try again. Let's use the same logic. Signed-off-by:
-
Maxime Ripard authored
The current code only base its decision for whether the scrambler must be enabled or not on the pixel clock of the mode, but doesn't take the bits per color into account. Let's leverage the new function to compute the clock rate in the scrambler setup code. Signed-off-by:
-
Maxime Ripard authored
In the function that validates that the clock isn't too high, we've only taken our controller limitations into account so far. However, the sink can have a limit on the maximum TMDS clock it can deal with too which is exposed through the EDID and the drm_display_info. Make sure we check it. Signed-off-by:
-
Maxime Ripard authored
The code to compute our clock rate for a given setup will be called in multiple places in the next patches, so let's create a separate function for it. Signed-off-by:
-
Maxime Ripard authored
Our code is doing the same clock rate validation in multiple instances. Let's create a helper to share the rate validation. Signed-off-by:
-
Maxime Ripard authored
The pixel_rate field in the vc4_hdmi_connector_state struct actually stores the TMDS character rate, let's rename it for consistency. Suggested-by:
-
YueHaibing authored
If DRM_ITE_IT6505 is y but DRM_DP_HELPER is m, building failed: drivers/gpu/drm/bridge/ite-it6505.o: In function `it6505_i2c_remove': ite-it6505.c:(.text+0x35c): undefined reference to `drm_dp_aux_unregister' drivers/gpu/drm/bridge/ite-it6505.o: In function `it6505_dpcd_read': ite-it6505.c:(.text+0x420): undefined reference to `drm_dp_dpcd_read' drivers/gpu/drm/bridge/ite-it6505.o: In function `it6505_get_dpcd': ite-it6505.c:(.text+0x4a4): undefined reference to `drm_dp_dpcd_read' drivers/gpu/drm/bridge/ite-it6505.o: In function `it6505_dpcd_write': ite-it6505.c:(.text+0x52c): undefined reference to `drm_dp_dpcd_write' Select DRM_DP_HELPER for DRM_ITE_IT6505 to fix this. Fixes: b5c84a9e ("drm/bridge: add it6505 driver") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
-
