- 07 Jan, 2022 16 commits
-
-
Eric Hankland authored
When KVM retires a guest branch instruction through emulation, increment any vPMCs that are configured to monitor "branch instructions retired," and update the sample period of those counters so that they will overflow at the right time. Signed-off-by:
Eric Hankland <ehankland@google.com> [jmattson: - Split the code to increment "branch instructions retired" into a separate commit. - Moved/consolidated the calls to kvm_pmu_trigger_event() in the emulation of VMLAUNCH/VMRESUME to accommodate the evolution of that code. ] Fixes: f5132b01 ("KVM: Expose a version 2 architectural PMU to a guests") Signed-off-by:
Jim Mattson <jmattson@google.com> Message-Id: <20211130074221.93635-7-likexu@tencent.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Eric Hankland authored
When KVM retires a guest instruction through emulation, increment any vPMCs that are configured to monitor "instructions retired," and update the sample period of those counters so that they will overflow at the right time. Signed-off-by:
Like Xu <likexu@tencent.com> Message-Id: <20211130074221.93635-6-likexu@tencent.com> Signed-off-by:
-
Like Xu authored
Depending on whether intr should be triggered or not, KVM registers two different event overflow callbacks in the perf_event context. The code skeleton of these two functions is very similar, so the pmc->intr can be stored into pmc from pmc_reprogram_counter() which provides smaller instructions footprint against the u-architecture branch predictor. The __kvm_perf_overflow() can be called in non-nmi contexts and a flag is needed to distinguish the caller context and thus avoid a check on kvm_is_in_guest(), otherwise we might get warnings from suspicious RCU or check_preemption_disabled(). Suggested-by:
-
Like Xu authored
Since we set the same semantic event value for the fixed counter in pmc->eventsel, returning the perf_hw_id for the fixed counter via find_fixed_event() can be painlessly replaced by pmc_perf_hw_id() with the help of pmc_is_fixed() check. Signed-off-by:
-
Like Xu authored
The find_arch_event() returns a "unsigned int" value, which is used by the pmc_reprogram_counter() to program a PERF_TYPE_HARDWARE type perf_event. The returned value is actually the kernel defined generic perf_hw_id, let's rename it to pmc_perf_hw_id() with simpler incoming parameters for better self-explanation. Signed-off-by:
-
Like Xu authored
The current pmc->eventsel for fixed counter is underutilised. The pmc->eventsel can be setup for all known available fixed counters since we have mapping between fixed pmc index and the intel_arch_events array. Either gp or fixed counter, it will simplify the later checks for consistency between eventsel and perf_hw_id. Signed-off-by:
-
Paolo Bonzini authored
Because IceLake has 4 fixed performance counters but KVM only supports 3, it is possible for reprogram_fixed_counters to pass to reprogram_fixed_counter an index that is out of bounds for the fixed_pmc_events array. Ultimately intel_find_fixed_event, which is the only place that uses fixed_pmc_events, handles this correctly because it checks against the size of fixed_pmc_events anyway. Every other place operates on the fixed_counters[] array which is sized according to INTEL_PMC_MAX_FIXED. However, it is cleaner if the unsupported performance counters are culled early on in reprogram_fixed_counters. Signed-off-by: -
Lai Jiangshan authored
When !CR0_PG -> CR0_PG, vcpu->arch.cr3 becomes active, but GUEST_CR3 is still vmx->ept_identity_map_addr if EPT + !URG. So VCPU_EXREG_CR3 is considered to be dirty and GUEST_CR3 needs to be updated in this case. Reported-by:
Maxim Levitsky <mlevitsk@redhat.com> Suggested-by:
Sean Christopherson <seanjc@google.com> Signed-off-by:
Lai Jiangshan <laijs@linux.alibaba.com> Message-Id: <20211216021938.11752-4-jiangshanlai@gmail.com> Fixes: c62c7bd4 ("KVM: VMX: Update vmcs.GUEST_CR3 only when the guest CR3 is dirty") Signed-off-by:
-
Lai Jiangshan authored
For shadow paging, the page table needs to be reconstructed before the coming VMENTER if the guest PDPTEs is changed. But not all paths that call load_pdptrs() will cause the page tables to be reconstructed. Normally, kvm_mmu_reset_context() and kvm_mmu_free_roots() are used to launch later reconstruction. The commit d81135a5("KVM: x86: do not reset mmu if CR0.CD and CR0.NW are changed") skips kvm_mmu_reset_context() after load_pdptrs() when changing CR0.CD and CR0.NW. The commit 21823fbd("KVM: x86: Invalidate all PGDs for the current PCID on MOV CR3 w/ flush") skips kvm_mmu_free_roots() after load_pdptrs() when rewriting the CR3 with the same value. The commit a91a7c70("KVM: X86: Don't reset mmu context when toggling X86_CR4_PGE") skips kvm_mmu_reset_context() after load_pdptrs() when changing CR4.PGE. Guests like linux would keep the PDPTEs unchanged for every instance of pagetable, so this missing reconstruction has no problem for linux guests. Fixes: d81135a5("KVM: x86: do not reset mmu if CR0.CD and CR0.NW are changed") Fixes: 21823fbd("KVM: x86: Invalidate all PGDs for the current PCID on MOV CR3 w/ flush") Fixes: a91a7c70("KVM: X86: Don't reset mmu context when toggling X86_CR4_PGE") Suggested-by:
-
Lai Jiangshan authored
The host CR3 in the vcpu thread can only be changed when scheduling, so commit 15ad9762 ("KVM: VMX: Save HOST_CR3 in vmx_prepare_switch_to_guest()") changed vmx.c to only save it in vmx_prepare_switch_to_guest(). However, it also has to be synced in vmx_sync_vmcs_host_state() when switching VMCS. vmx_set_host_fs_gs() is called in both places, so rename it to vmx_set_vmcs_host_state() and make it update HOST_CR3. Fixes: 15ad9762 ("KVM: VMX: Save HOST_CR3 in vmx_prepare_switch_to_guest()") Signed-off-by:
-
Paolo Bonzini authored
This reverts commit 24cd19a2. Sean Christopherson reports: "Commit 24cd19a2 ('KVM: X86: Update mmu->pdptrs only when it is changed') breaks nested VMs with EPT in L0 and PAE shadow paging in L2. Reproducing is trivial, just disable EPT in L1 and run a VM. I haven't investigating how it breaks things." Reviewed-by:
-
Peter Gonda authored
Add tests to confirm mirror vms can only run correct subset of commands. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Marc Orr <marcorr@google.com> Signed-off-by:
Peter Gonda <pgonda@google.com> Message-Id: <20211208191642.3792819-4-pgonda@google.com> Signed-off-by:
-
Peter Gonda authored
TEST_ASSERT in SEV ioctl was allowing errors because it checked return value was good OR the FW error code was OK. This TEST_ASSERT should require both (aka. AND) values are OK. Removes the LAUNCH_START from the mirror VM because this call correctly fails because mirror VMs cannot call this command. Currently issues with the PSP driver functions mean the firmware error is not always reset to SEV_RET_SUCCESS when a call is successful. Mainly sev_platform_init() doesn't correctly set the fw error if the platform has already been initialized. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Marc Orr <marcorr@google.com> Signed-off-by:
-
Peter Gonda authored
Mirrors should not be able to call LAUNCH_START. Remove the call on the mirror to correct the test before fixing sev_ioctl() to correctly assert on this failed ioctl. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Marc Orr <marcorr@google.com> Signed-off-by:
-
https://github.com/kvm-riscv/linuxPaolo Bonzini authored
KVM/riscv changes for 5.17, take #1 - Use common KVM implementation of MMU memory caches - SBI v0.2 support for Guest - Initial KVM selftests support - Fix to avoid spurious virtual interrupts after clearing hideleg CSR - Update email address for Anup and Atish
-
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarmPaolo Bonzini authored
KVM/arm64 updates for Linux 5.16 - Simplification of the 'vcpu first run' by integrating it into KVM's 'pid change' flow - Refactoring of the FP and SVE state tracking, also leading to a simpler state and less shared data between EL1 and EL2 in the nVHE case - Tidy up the header file usage for the nvhe hyp object - New HYP unsharing mechanism, finally allowing pages to be unmapped from the Stage-1 EL2 page-tables - Various pKVM cleanups around refcounting and sharing - A couple of vgic fixes for bugs that would trigger once the vcpu xarray rework is merged, but not sooner - Add minimal support for ARMv8.7's PMU extension - Rework kvm_pgtable initialisation ahead of the NV work - New selftest for IRQ injection - Teach selftests about the lack of default IPA space and page sizes - Expand sysreg selftest to deal with Pointer Authentication - The usual bunch of cleanups and doc update
-
- 06 Jan, 2022 14 commits
-
-
Anup Patel authored
I am no longer work at Western Digital so update my email address to personal one and add entries to .mailmap as well. Signed-off-by:
Anup Patel <anup@brainfault.org> Acked-by:
Atish Patra <atishp@rivosinc.com>
-
Vincent Chen authored
When the last VM is terminated, the host kernel will invoke function hardware_disable_nolock() on each CPU to disable the related virtualization functions. Here, RISC-V currently only clears hideleg CSR and hedeleg CSR. This behavior will cause the host kernel to receive spurious interrupts if hvip CSR has pending interrupts and the corresponding enable bits in vsie CSR are asserted. To avoid it, hvip CSR and vsie CSR must be cleared before clearing hideleg CSR. Fixes: 99cdc6c1 ("RISC-V: Add initial skeletal KVM support") Signed-off-by:
Vincent Chen <vincent.chen@sifive.com> Reviewed-by:
Anup Patel <anup.patel@wdc.com> Signed-off-by:
-
Anup Patel authored
We add initial support for RISC-V 64-bit in KVM selftests using which we can cross-compile and run arch independent tests such as: demand_paging_test dirty_log_test kvm_create_max_vcpus, kvm_page_table_test set_memory_region_test kvm_binary_stats_test All VM guest modes defined in kvm_util.h require at least 48-bit guest virtual address so to use KVM RISC-V selftests hardware need to support at least Sv48 MMU for guest (i.e. VS-mode). Signed-off-by:
-
Anup Patel authored
We add EXTRA_CFLAGS to the common CFLAGS of top-level Makefile which will allow users to pass additional compile-time flags such as "-static". Signed-off-by:
-
Anup Patel authored
The number of GPA bits supported for a RISC-V Guest/VM is based on the MMU mode used by the G-stage translation. The KVM RISC-V will detect and use the best possible MMU mode for the G-stage in kvm_arch_init(). We add a generic VM capability KVM_CAP_VM_GPA_BITS which can be used by the KVM userspace to get the number of GPA (guest physical address) bits supported for a Guest/VM. Signed-off-by:
-
Anup Patel authored
The SBI experimental extension space is for temporary (or experimental) stuff whereas SBI vendor extension space is for hardware vendor specific stuff. Both these SBI extension spaces won't be standardized by the SBI specification so let's blindly forward such SBI calls to the userspace. Signed-off-by:
-
Jisheng Zhang authored
There are no users outside vcpu_fp.c so make kvm_riscv_vcpu_fp_clean() static. Signed-off-by:
Jisheng Zhang <jszhang@kernel.org> Signed-off-by:
-
Atish Patra authored
I am no longer employed by western digital. Update my email address to personal one and add entries to .mailmap as well. Signed-off-by:
Atish Patra <atishp@atishpatra.org> Signed-off-by:
-
Atish Patra authored
SBI HSM extension allows OS to start/stop harts any time. It also allows ordered booting of harts instead of random booting. Implement SBI HSM exntesion and designate the vcpu 0 as the boot vcpu id. All other non-zero non-booting vcpus should be brought up by the OS implementing HSM extension. If the guest OS doesn't implement HSM extension, only single vcpu will be available to OS. Signed-off-by:
Atish Patra <atish.patra@wdc.com> Signed-off-by:
-
Atish Patra authored
The SBI v0.2 contains some of the improved versions of required v0.1 extensions such as remote fence, timer and IPI. This patch implements those extensions. Signed-off-by:
-
Atish Patra authored
SBI v0.2 base extension defined to allow backward compatibility and probing of future extensions. This is also the only mandatory SBI extension that must be implemented by SBI implementors. Signed-off-by:
-
Atish Patra authored
With SBI v0.2, there may be more SBI extensions in future. It makes more sense to group related extensions in separate files. Guest kernel will choose appropriate SBI version dynamically. Move the existing implementation to a separate file so that it can be removed in future without much conflict. Signed-off-by:
-
Atish Patra authored
The existing SBI specification impelementation follows v0.1 specification. The latest specification allows more scalability and performance improvements. Rename the existing implementation as v0.1 and provide a way to allow future extensions. Signed-off-by:
-
Sean Christopherson authored
Use common KVM's implementation of the MMU memory caches, which for all intents and purposes is semantically identical to RISC-V's version, the only difference being that the common implementation will fall back to an atomic allocation if there's a KVM bug that triggers a cache underflow. RISC-V appears to have based its MMU code on arm64 before the conversion to the common caches in commit c1a33aeb ("KVM: arm64: Use common KVM implementation of MMU memory caches"), despite having also copy-pasted the definition of KVM_ARCH_NR_OBJS_PER_MEMORY_CACHE in kvm_types.h. Opportunistically drop the superfluous wrapper kvm_riscv_stage2_flush_cache(), whose name is very, very confusing as "cache flush" in the context of MMU code almost always refers to flushing hardware caches, not freeing unused software objects. No functional change intended. Signed-off-by:
-
- 04 Jan, 2022 6 commits
-
-
Marc Zyngier authored
* kvm-arm64/misc-5.17: : . : Misc fixes and improvements: : - Add minimal support for ARMv8.7's PMU extension : - Constify kvm_io_gic_ops : - Drop kvm_is_transparent_hugepage() prototype : - Drop unused workaround_flags field : - Rework kvm_pgtable initialisation : - Documentation fixes : - Replace open-coded SCTLR_EL1.EE useage with its defined macro : - Sysreg list selftest update to handle PAuth : - Include cleanups : . KVM: arm64: vgic: Replace kernel.h with the necessary inclusions KVM: arm64: Fix comment typo in kvm_vcpu_finalize_sve() KVM: arm64: selftests: get-reg-list: Add pauth configuration KVM: arm64: Fix comment on barrier in kvm_psci_vcpu_on() KVM: arm64: Fix comment for kvm_reset_vcpu() KVM: arm64: Use defined value for SCTLR_ELx_EE KVM: arm64: Rework kvm_pgtable initialisation KVM: arm64: Drop unused workaround_flags vcpu field Signed-off-by:Marc Zyngier <maz@kernel.org>
-
Andy Shevchenko authored
arm_vgic.h does not require all the stuff that kernel.h provides. Replace kernel.h inclusion with the list of what is really being used. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Marc Zyngier authored
* kvm-arm64/selftest/irq-injection: : . : New tests from Ricardo Koller: : "This series adds a new test, aarch64/vgic-irq, that validates the injection of : different types of IRQs from userspace using various methods and configurations" : . KVM: selftests: aarch64: Add test for restoring active IRQs KVM: selftests: aarch64: Add ISPENDR write tests in vgic_irq KVM: selftests: aarch64: Add tests for IRQFD in vgic_irq KVM: selftests: Add IRQ GSI routing library functions KVM: selftests: aarch64: Add test_inject_fail to vgic_irq KVM: selftests: aarch64: Add tests for LEVEL_INFO in vgic_irq KVM: selftests: aarch64: Level-sensitive interrupts tests in vgic_irq KVM: selftests: aarch64: Add preemption tests in vgic_irq KVM: selftests: aarch64: Cmdline arg to set EOI mode in vgic_irq KVM: selftests: aarch64: Cmdline arg to set number of IRQs in vgic_irq test KVM: selftests: aarch64: Abstract the injection functions in vgic_irq KVM: selftests: aarch64: Add vgic_irq to test userspace IRQ injection KVM: selftests: aarch64: Add vGIC library functions to deal with vIRQ state KVM: selftests: Add kvm_irq_line library function KVM: selftests: aarch64: Add GICv3 register accessor library functions KVM: selftests: aarch64: Add function for accessing GICv3 dist and redist registers KVM: selftests: aarch64: Move gic_v3.h to shared headers Signed-off-by: -
Marc Zyngier authored
* kvm-arm64/selftest/ipa: : . : Expand the KVM/arm64 selftest infrastructure to discover : supported page sizes at runtime, support 16kB pages, and : find out about the original M1 stupidly small IPA space. : . KVM: selftests: arm64: Add support for various modes with 16kB page size KVM: selftests: arm64: Add support for VM_MODE_P36V48_{4K,64K} KVM: selftests: arm64: Rework TCR_EL1 configuration KVM: selftests: arm64: Check for supported page sizes KVM: selftests: arm64: Introduce a variable default IPA size KVM: selftests: arm64: Initialise default guest mode at test startup time Signed-off-by: -
Zenghui Yu authored
kvm_arm_init_arch_resources() was renamed to kvm_arm_init_sve() in commit a3be836d ("KVM: arm/arm64: Demote kvm_arm_init_arch_resources() to just set up SVE"). Fix the function name in comment of kvm_vcpu_finalize_sve(). Signed-off-by:
Zenghui Yu <yuzenghui@huawei.com> Signed-off-by:
-
Marc Zyngier authored
The get-reg-list test ignores the Pointer Authentication features, which is a shame now that we have relatively common HW with this feature. Define two new configurations (with and without PMU) that exercise the KVM capabilities. Signed-off-by:
Andrew Jones <drjones@redhat.com> Link: https://lore.kernel.org/r/20211228121414.1013250-1-maz@kernel.org
-
- 28 Dec, 2021 4 commits
-
-
Ricardo Koller authored
Add a test that restores multiple IRQs in active state, it does it by writing into ISACTIVER from the guest and using KVM ioctls. This test tries to emulate what would happen during a live migration: restore active IRQs. Signed-off-by:
Ricardo Koller <ricarkol@google.com> Acked-by:
-
Ricardo Koller authored
Add injection tests that use writing into the ISPENDR register (to mark IRQs as pending). This is typically used by migration code. Signed-off-by:
-
Ricardo Koller authored
Add injection tests for the KVM_IRQFD ioctl into vgic_irq. Signed-off-by:
-
Ricardo Koller authored
Add an architecture independent wrapper function for creating and writing IRQ GSI routing tables. Also add a function to add irqchip entries. Signed-off-by:
-
