Attributes of stack filter are show as unsigned decimal, such as
'require-start', 'require-end'.  This patch change to show them as
unsigned hexadecimal for more readable.

Before:
  $ echo 0xffffffffc0257000 > /sys/kernel/debug/failslab/require-start
  $ cat /sys/kernel/debug/failslab/require-start
  18446744072638263296

After:
  $ echo 0xffffffffc0257000 > /sys/kernel/debug/failslab/require-start
  $ cat /sys/kernel/debug/failslab/require-start
  0xffffffffc0257000

[wangyufen@huawei.com: use debugfs_create_xul() instead of debugfs_create_xl()]
  Link: https://lkml.kernel.org/r/1664331299-4976-1-git-send-email-wangyufen@huawei.com
Link: https://lkml.kernel.org/r/20220817080332.1052710-4-weiyongjun1@huawei.comSigned-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Isabella Basso <isabbasso@riseup.net>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

If FAULT_INJECTION_STACKTRACE_FILTER is enabled, the depth is default to
32.  This means fail_stacktrace() will iter each entry's stacktrace, even
if filter is not configured.

This patch changes to quick return from fail_stacktrace() if stacktrace
filter is not set.

Link: https://lkml.kernel.org/r/20220817080332.1052710-3-weiyongjun1@huawei.comSigned-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Isabella Basso <isabbasso@riseup.net>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

This patchset allow fault injection to run on x86_64 and makes stacktrace
filter work as expected.  With this, we can test a device driver module
with fault injection more easily.


This patch (of 4):

FAULT_INJECTION_STACKTRACE_FILTER option was apparently disallowed on
x86_64 because of problems with the stack unwinder:

    commit 6d690dca
    Author: Akinobu Mita <akinobu.mita@gmail.com>
    Date:   Sat May 12 10:36:53 2007 -0700

        fault injection: disable stacktrace filter for x86-64

However, there is no problems whatsoever with this today. Let's allow
it again.

Link: https://lkml.kernel.org/r/20220817080332.1052710-1-weiyongjun1@huawei.com
Link: https://lkml.kernel.org/r/20220817080332.1052710-2-weiyongjun1@huawei.comSigned-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Isabella Basso <isabbasso@riseup.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Pull kvm updates from Paolo Bonzini:
 "ARM64:

   - Enable the per-vcpu dirty-ring tracking mechanism, together with an
     option to keep the good old dirty log around for pages that are
     dirtied by something other than a vcpu.

   - Switch to the relaxed parallel fault handling, using RCU to delay
     page table reclaim and giving better performance under load.

   - Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping
     option, which multi-process VMMs such as crosvm rely on (see merge
     commit 382b5b87: "Fix a number of issues with MTE, such as
     races on the tags being initialised vs the PG_mte_tagged flag as
     well as the lack of support for VM_SHARED when KVM is involved.
     Patches from Catalin Marinas and Peter Collingbourne").

   - Merge the pKVM shadow vcpu state tracking that allows the
     hypervisor to have its own view of a vcpu, keeping that state
     private.

   - Add support for the PMUv3p5 architecture revision, bringing support
     for 64bit counters on systems that support it, and fix the
     no-quite-compliant CHAIN-ed counter support for the machines that
     actually exist out there.

   - Fix a handful of minor issues around 52bit VA/PA support (64kB
     pages only) as a prefix of the oncoming support for 4kB and 16kB
     pages.

   - Pick a small set of documentation and spelling fixes, because no
     good merge window would be complete without those.

  s390:

   - Second batch of the lazy destroy patches

   - First batch of KVM changes for kernel virtual != physical address
     support

   - Removal of a unused function

  x86:

   - Allow compiling out SMM support

   - Cleanup and documentation of SMM state save area format

   - Preserve interrupt shadow in SMM state save area

   - Respond to generic signals during slow page faults

   - Fixes and optimizations for the non-executable huge page errata
     fix.

   - Reprogram all performance counters on PMU filter change

   - Cleanups to Hyper-V emulation and tests

   - Process Hyper-V TLB flushes from a nested guest (i.e. from a L2
     guest running on top of a L1 Hyper-V hypervisor)

   - Advertise several new Intel features

   - x86 Xen-for-KVM:

      - Allow the Xen runstate information to cross a page boundary

      - Allow XEN_RUNSTATE_UPDATE flag behaviour to be configured

      - Add support for 32-bit guests in SCHEDOP_poll

   - Notable x86 fixes and cleanups:

      - One-off fixes for various emulation flows (SGX, VMXON, NRIPS=0).

      - Reinstate IBPB on emulated VM-Exit that was incorrectly dropped
        a few years back when eliminating unnecessary barriers when
        switching between vmcs01 and vmcs02.

      - Clean up vmread_error_trampoline() to make it more obvious that
        params must be passed on the stack, even for x86-64.

      - Let userspace set all supported bits in MSR_IA32_FEAT_CTL
        irrespective of the current guest CPUID.

      - Fudge around a race with TSC refinement that results in KVM
        incorrectly thinking a guest needs TSC scaling when running on a
        CPU with a constant TSC, but no hardware-enumerated TSC
        frequency.

      - Advertise (on AMD) that the SMM_CTL MSR is not supported

      - Remove unnecessary exports

  Generic:

   - Support for responding to signals during page faults; introduces
     new FOLL_INTERRUPTIBLE flag that was reviewed by mm folks

  Selftests:

   - Fix an inverted check in the access tracking perf test, and restore
     support for asserting that there aren't too many idle pages when
     running on bare metal.

   - Fix build errors that occur in certain setups (unsure exactly what
     is unique about the problematic setup) due to glibc overriding
     static_assert() to a variant that requires a custom message.

   - Introduce actual atomics for clear/set_bit() in selftests

   - Add support for pinning vCPUs in dirty_log_perf_test.

   - Rename the so called "perf_util" framework to "memstress".

   - Add a lightweight psuedo RNG for guest use, and use it to randomize
     the access pattern and write vs. read percentage in the memstress
     tests.

   - Add a common ucall implementation; code dedup and pre-work for
     running SEV (and beyond) guests in selftests.

   - Provide a common constructor and arch hook, which will eventually
     be used by x86 to automatically select the right hypercall (AMD vs.
     Intel).

   - A bunch of added/enabled/fixed selftests for ARM64, covering
     memslots, breakpoints, stage-2 faults and access tracking.

   - x86-specific selftest changes:

      - Clean up x86's page table management.

      - Clean up and enhance the "smaller maxphyaddr" test, and add a
        related test to cover generic emulation failure.

      - Clean up the nEPT support checks.

      - Add X86_PROPERTY_* framework to retrieve multi-bit CPUID values.

      - Fix an ordering issue in the AMX test introduced by recent
        conversions to use kvm_cpu_has(), and harden the code to guard
        against similar bugs in the future. Anything that tiggers
        caching of KVM's supported CPUID, kvm_cpu_has() in this case,
        effectively hides opt-in XSAVE features if the caching occurs
        before the test opts in via prctl().

  Documentation:

   - Remove deleted ioctls from documentation

   - Clean up the docs for the x86 MSR filter.

   - Various fixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (361 commits)
  KVM: x86: Add proper ReST tables for userspace MSR exits/flags
  KVM: selftests: Allocate ucall pool from MEM_REGION_DATA
  KVM: arm64: selftests: Align VA space allocator with TTBR0
  KVM: arm64: Fix benign bug with incorrect use of VA_BITS
  KVM: arm64: PMU: Fix period computation for 64bit counters with 32bit overflow
  KVM: x86: Advertise that the SMM_CTL MSR is not supported
  KVM: x86: remove unnecessary exports
  KVM: selftests: Fix spelling mistake "probabalistic" -> "probabilistic"
  tools: KVM: selftests: Convert clear/set_bit() to actual atomics
  tools: Drop "atomic_" prefix from atomic test_and_set_bit()
  tools: Drop conflicting non-atomic test_and_{clear,set}_bit() helpers
  KVM: selftests: Use non-atomic clear/set bit helpers in KVM tests
  perf tools: Use dedicated non-atomic clear/set bit helpers
  tools: Take @bit as an "unsigned long" in {clear,set}_bit() helpers
  KVM: arm64: selftests: Enable single-step without a "full" ucall()
  KVM: x86: fix APICv/x2AVIC disabled when vm reboot by itself
  KVM: Remove stale comment about KVM_REQ_UNHALT
  KVM: Add missing arch for KVM_CREATE_DEVICE and KVM_{SET,GET}_DEVICE_ATTR
  KVM: Reference to kvm_userspace_memory_region in doc and comments
  KVM: Delete all references to removed KVM_SET_MEMORY_ALIAS ioctl
  ...

Pull more ACPI updates from Rafael Wysocki:
 "These fix an AML byte code execution issue in ACPICA and two issues in
  the ACPI EC driver which requires rearranging ACPICA code.

  Specifics:

   - Avoid trying to resolve operands in AML when there are none
     (Amadeusz Sławiński)

   - Fix indentation in include/acpi/acpixf.h to help applying patches
     from the upstream ACPICA git (Hans de Goede)

   - Make it possible to install an address space handler without
     evaluating _REG for Operation Regions in the given address space
     (Hans de Goede)

   - Defer the evaluation of _REG for ECDT described ECs till the
     matching EC device in the DSDT gets parsed and acpi_ec_add() gets
     called for it (Hans de Goede)

   - Fix EC address space handler unregistration (Hans de Goede)"

* tag 'acpi-6.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: EC: Fix ECDT probe ordering issues
  ACPI: EC: Fix EC address space handler unregistration
  ACPICA: Allow address_space_handler Install and _REG execution as 2 separate steps
  ACPICA: include/acpi/acpixf.h: Fix indentation
  ACPICA: Fix operand resolution

Pull more thermal control updates from Rafael Wysocki:
 "These are updates of assorted thermal drivers, mostly for ARM
  platforms, generally isolated and fairly straightforward, and the
  recent Intel HFI driver fix for systems without HFI support.

  Specifics:

   - Avoid clearing the HFI status bit on systems without HFI support
     which triggers unchecked MSR access errors (Srinivas Pandruvada)

   - Add sm8450 and sm8550 QCom compatible string to DT bindings (Luca
     Weiss, Neil Armstrong)

   - Use devm_platform_get_and_ioremap_resource on the ST platform to
     group two calls into a single one (Minghao Chi)

   - Use GENMASK instead of bitmaps and validate the temperature after
     reading it in the imx8mm_thermal driver (Marcus Folkesson)

   - Convert generic-adc-thermal to DT schema (Rob Herring)

   - Fix debug print message with inverted logic in the k3_j72xx_bandgap
     driver (Keerthy)

   - Fix memory leak on thermal_of_zone_register() failure (Ido
     Schimmel)

   - Add support for IPQ8074 in the tsens thermal driver along with the
     DT bindings (Robert Marko)

   - Fix and rework the debugfs code in the tsens driver (Christian
     Marangi)

   - Add calibration and DT documentation for the imx8mm driver (Marek
     Vasut)

   - Add DT bindings and compatible for the Mediatek SoCs mt7981 and
     mt7983 (Daniel Golle)

   - Don't show an error message if it happens at probe time while it
     will be deferred on the QCom SPMI ADC driver (Johan Hovold)

   - Add HWMon support for the imx8mm board (Alexander Stein)

   - Remove pointless include from the power allocator governor
     (Christophe JAILLET)

   - Add interrupt DT bindings for QCom SoCs SC8280XP, SM6350 and SM8450
     (Krzysztof Kozlowski)

   - Fix inaccurate warning message for the QCom tsens gen2 (Luca Weiss)

   - Demote error log of thermal zone register to debug in the tsens
     QCom driver (Manivannan Sadhasivam)

   - Consolidate the the efuse values and the errata handling in the TI
     Bandgap driver (Bryan Brattlof)

   - Document Renesas RZ/Five as compatible with RZ/G2UL in the DT
     bindings (Lad Prabhakar)

   - Fix the irq handler return value in the LMh driver (Bjorn
     Andersson)

   - Delete empty platform remove callback from imx_sc_thermal (Uwe
     Kleine-König)"

* tag 'thermal-6.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (35 commits)
  thermal/drivers/imx_sc_thermal: Drop empty platform remove function
  thermal/drivers/qcom/lmh: Fix irq handler return value
  dt-bindings: thermal: qcom-tsens: Add compatible for sm8550
  thermal/drivers/st: Use devm_platform_get_and_ioremap_resource()
  dt-bindings: thermal: rzg2l-thermal: Document RZ/Five SoC
  dt-bindings: thermal: k3-j72xx: conditionally require efuse reg range
  dt-bindings: thermal: k3-j72xx: elaborate on binding description
  thermal/drivers/k3_j72xx_bandgap: Map fuse_base only for erratum workaround
  thermal/drivers/k3_j72xx_bandgap: Remove fuse_base from structure
  thermal/drivers/k3_j72xx_bandgap: Use bool for i2128 erratum flag
  thermal/drivers/k3_j72xx_bandgap: Simplify k3_thermal_get_temp() function
  thermal/drivers/qcom: Demote error log of thermal zone register to debug
  thermal/drivers/qcom/temp-alarm: Fix inaccurate warning for gen2
  dt-bindings: thermal: qcom-tsens: narrow interrupts for SC8280XP, SM6350 and SM8450
  thermal/core/power allocator: Remove a useless include
  thermal/drivers/imx8mm: Add hwmon support
  thermal: qcom-spmi-adc-tm5: suppress probe-deferral error message
  dt-bindings: thermal: mediatek: add compatible string for MT7986 and MT7981 SoC
  thermal: ti-soc-thermal: Drop comma after SoC match table sentinel
  thermal/drivers/imx: Add support for loading calibration data from OCOTP
  ...

Pull gpio updates from Bartosz Golaszewski:
 "We have a new GPIO multiplexer driver, bunch of driver updates and
  refactoring in the core GPIO library.

  GPIO core:
   - teach gpiolib to work with software nodes for HW description
   - remove ARCH_NR_GPIOS treewide as we no longer impose any limit on
     the number of GPIOS since the allocation became entirely dynamic
   - add support for HW quirks for Cirrus CS42L56 codec, Marvell NFC
     controller, Freescale PCIe and Ethernet controller, Himax LCDs and
     Mediatek mt2701
   - refactor OF quirk code
   - some general refactoring of the OF and ACPI code, adding new
     helpers, minor tweaks and fixes, making fwnode usage consistent
     etc.

  GPIO uAPI:
   - fix an issue where the user-space can trigger a NULL-pointer
     dereference in the kernel by opening a device file, forcing a
     driver unbind and then calling one of the syscalls on the
     associated file descriptor

  New drivers:
   - add gpio-latch: a new GPIO multiplexer based on latches connected
     to other GPIOs

  Driver updates:
   - convert i2c GPIO expanders to using .probe_new()
   - drop the gpio-sta2x11 driver
   - factor out common code for the ACCES IDIO-16 family of controllers
     and use this new library wherever applicable in drivers
   - add DT support to gpio-hisi
   - allow building gpio-davinci as a module and increase its maxItems
     property
   - add support for a new model to gpio-pca9570
   - other minor changes to various drivers"

* tag 'gpio-updates-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (66 commits)
  gpio: sim: set a limit on the number of GPIOs
  gpiolib: protect the GPIO device against being dropped while in use by user-space
  gpiolib: cdev: fix NULL-pointer dereferences
  gpiolib: Provide to_gpio_device() helper
  gpiolib: Unify access to the device properties
  gpio: Do not include <linux/kernel.h> when not really needed.
  gpio: pcf857x: Convert to i2c's .probe_new()
  gpio: pca953x: Convert to i2c's .probe_new()
  gpio: max732x: Convert to i2c's .probe_new()
  dt-bindings: gpio: gpio-davinci: Increase maxItems in gpio-line-names
  gpiolib: ensure that fwnode is properly set
  gpio: sl28cpld: Replace irqchip mask_invert with unmask_base
  gpiolib: of: Use correct fwnode for DT-probed chips
  gpiolib: of: Drop redundant check in of_mm_gpiochip_remove()
  gpiolib: of: Prepare of_mm_gpiochip_add_data() for fwnode
  gpiolib: add support for software nodes
  gpiolib: consolidate GPIO lookups
  gpiolib: acpi: avoid leaking ACPI details into upper gpiolib layers
  gpiolib: acpi: teach acpi_find_gpio() to handle data-only nodes
  gpiolib: acpi: change acpi_find_gpio() to accept firmware node
  ...

Merge additional ACPI EC driver fixes for 6.2-rc1:

 - Fix EC address space handler unregistration (Hans de Goede).

 - Defer the evaluation of _REG for ECDT described ECs till the matching
   EC device in the DSDT gets parsed and acpi_ec_add() gets called for
   it (Hans de Goede).

* acpi-ec:
  ACPI: EC: Fix ECDT probe ordering issues
  ACPI: EC: Fix EC address space handler unregistration

Pull fbdev updates from Helge Deller:
 "The most relevant change are the patches from Dmitry Torokhov to
  switch omapfb to the gpiod API.

  The other patches are small and fix e.g. UML build issues, improve the
  error paths and cleanup code"

* tag 'fbdev-for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (32 commits)
  fbdev: fbcon: release buffer when fbcon_do_set_font() failed
  fbdev: sh_mobile_lcdcfb: use sysfs_emit() to instead of scnprintf()
  fbdev: uvesafb: use sysfs_emit() to instead of scnprintf()
  fbdev: uvesafb: Simplify uvesafb_remove()
  fbdev: uvesafb: Fixes an error handling path in uvesafb_probe()
  fbdev: uvesafb: don't build on UML
  fbdev: geode: don't build on UML
  fbdev: ep93xx-fb: Add missing clk_disable_unprepare in ep93xxfb_probe()
  fbdev: matroxfb: Convert to i2c's .probe_new()
  fbdev: da8xx-fb: add missing regulator_disable() in fb_probe
  fbdev: controlfb: fix spelling mistake "paramaters"->"parameters"
  fbdev: vermilion: decrease reference count in error path
  fbdev: smscufx: fix error handling code in ufx_usb_probe
  fbdev: via: Fix error in via_core_init()
  fbdev: pm2fb: fix missing pci_disable_device()
  fbdev: pxafb: Remove unnecessary print function dev_err()
  fbdev: omapfb: panel-sharp-ls037v7dw01: fix included headers
  fbdev: omapfb: panel-tpo-td028ttec1: stop including gpio.h
  fbdev: omapfb: panel-lgphilips-lb035q02: remove backlight GPIO handling
  fbdev: omapfb: encoder-opa362: fix included headers
  ...

Merge additional ACPICA changes for 6.2-rc1:

 - Avoid trying to resolve operands in AML when there are none (Amadeusz
   Sławiński).

 - Fix indentation in include/acpi/acpixf.h to help applying patches
   from the upstream ACPICA git (Hans de Goede).

 - Make it possible to install an address space handler without
   evaluating _REG for Operation Regions in the given address space (Hans
   de Goede).

* acpica:
  ACPICA: Allow address_space_handler Install and _REG execution as 2 separate steps
  ACPICA: include/acpi/acpixf.h: Fix indentation
  ACPICA: Fix operand resolution

Pull ksmbd updates from Steve French:
 "Six ksmbd server fixes"

* tag '6.2-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
  ksmbd: Convert to use sysfs_emit()/sysfs_emit_at() APIs
  ksmbd: Fix resource leak in smb2_lock()
  ksmbd: Fix resource leak in ksmbd_session_rpc_open()
  ksmbd: replace one-element arrays with flexible-array members
  ksmbd: use F_SETLK when unlocking a file
  ksmbd: set SMB2_SESSION_FLAG_ENCRYPT_DATA when enforcing data encryption for this share

Pull f2fs updates from Jaegeuk Kim:
 "In this round, we've added two features: F2FS_IOC_START_ATOMIC_REPLACE
  and a per-block age-based extent cache.

  F2FS_IOC_START_ATOMIC_REPLACE is a variant of the previous atomic
  write feature which guarantees a per-file atomicity. It would be more
  efficient than AtomicFile implementation in Android framework.

  The per-block age-based extent cache implements another type of extent
  cache in memory which keeps the per-block age in a file, so that block
  allocator could split the hot and cold data blocks more accurately.

  Enhancements:
   - introduce F2FS_IOC_START_ATOMIC_REPLACE
   - refactor extent_cache to add a new per-block-age-based extent cache support
   - introduce discard_urgent_util, gc_mode, max_ordered_discard sysfs knobs
   - add proc entry to show discard_plist info
   - optimize iteration over sparse directories
   - add barrier mount option

  Bug fixes:
   - avoid victim selection from previous victim section
   - fix to enable compress for newly created file if extension matches
   - set zstd compress level correctly
   - initialize locks early in f2fs_fill_super() to fix bugs reported by syzbot
   - correct i_size change for atomic writes
   - allow to read node block after shutdown
   - allow to set compression for inlined file
   - fix gc mode when gc_urgent_high_remaining is 1
   - should put a page when checking the summary info

  Minor fixes and various clean-ups in GC, discard, debugfs, sysfs, and
  doc"

* tag 'f2fs-for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (63 commits)
  f2fs: reset wait_ms to default if any of the victims have been selected
  f2fs: fix some format WARNING in debug.c and sysfs.c
  f2fs: don't call f2fs_issue_discard_timeout() when discard_cmd_cnt is 0 in f2fs_put_super()
  f2fs: fix iostat parameter for discard
  f2fs: Fix spelling mistake in label: free_bio_enrty_cache -> free_bio_entry_cache
  f2fs: add block_age-based extent cache
  f2fs: allocate the extent_cache by default
  f2fs: refactor extent_cache to support for read and more
  f2fs: remove unnecessary __init_extent_tree
  f2fs: move internal functions into extent_cache.c
  f2fs: specify extent cache for read explicitly
  f2fs: introduce f2fs_is_readonly() for readability
  f2fs: remove F2FS_SET_FEATURE() and F2FS_CLEAR_FEATURE() macro
  f2fs: do some cleanup for f2fs module init
  MAINTAINERS: Add f2fs bug tracker link
  f2fs: remove the unused flush argument to change_curseg
  f2fs: open code allocate_segment_by_default
  f2fs: remove struct segment_allocation default_salloc_ops
  f2fs: introduce discard_urgent_util sysfs node
  f2fs: define MIN_DISCARD_GRANULARITY macro
  ...

Pull RISC-V updates from Palmer Dabbelt:

 - Support for the T-Head PMU via the perf subsystem

 - ftrace support for rv32

 - Support for non-volatile memory devices

 - Various fixes and cleanups

* tag 'riscv-for-linus-6.2-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (52 commits)
  Documentation: RISC-V: patch-acceptance: s/implementor/implementer
  Documentation: RISC-V: Mention the UEFI Standards
  Documentation: RISC-V: Allow patches for non-standard behavior
  Documentation: RISC-V: Fix a typo in patch-acceptance
  riscv: Fixup compile error with !MMU
  riscv: Fix P4D_SHIFT definition for 3-level page table mode
  riscv: Apply a static assert to riscv_isa_ext_id
  RISC-V: Add some comments about the shadow and overflow stacks
  RISC-V: Align the shadow stack
  RISC-V: Ensure Zicbom has a valid block size
  RISC-V: Introduce riscv_isa_extension_check
  RISC-V: Improve use of isa2hwcap[]
  riscv: Don't duplicate _ALTERNATIVE_CFG* macros
  riscv: alternatives: Drop the underscores from the assembly macro names
  riscv: alternatives: Don't name unused macro parameters
  riscv: Don't duplicate __ALTERNATIVE_CFG in __ALTERNATIVE_CFG_2
  riscv: mm: call best_map_size many times during linear-mapping
  riscv: Move cast inside kernel_mapping_[pv]a_to_[vp]a
  riscv: Fix crash during early errata patching
  riscv: boot: add zstd support
  ...

Pull x86 core updates from Borislav Petkov:

 - Add the call depth tracking mitigation for Retbleed which has been
   long in the making. It is a lighterweight software-only fix for
   Skylake-based cores where enabling IBRS is a big hammer and causes a
   significant performance impact.

   What it basically does is, it aligns all kernel functions to 16 bytes
   boundary and adds a 16-byte padding before the function, objtool
   collects all functions' locations and when the mitigation gets
   applied, it patches a call accounting thunk which is used to track
   the call depth of the stack at any time.

   When that call depth reaches a magical, microarchitecture-specific
   value for the Return Stack Buffer, the code stuffs that RSB and
   avoids its underflow which could otherwise lead to the Intel variant
   of Retbleed.

   This software-only solution brings a lot of the lost performance
   back, as benchmarks suggest:

       https://lore.kernel.org/all/20220915111039.092790446@infradead.org/

   That page above also contains a lot more detailed explanation of the
   whole mechanism

 - Implement a new control flow integrity scheme called FineIBT which is
   based on the software kCFI implementation and uses hardware IBT
   support where present to annotate and track indirect branches using a
   hash to validate them

 - Other misc fixes and cleanups

* tag 'x86_core_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (80 commits)
  x86/paravirt: Use common macro for creating simple asm paravirt functions
  x86/paravirt: Remove clobber bitmask from .parainstructions
  x86/debug: Include percpu.h in debugreg.h to get DECLARE_PER_CPU() et al
  x86/cpufeatures: Move X86_FEATURE_CALL_DEPTH from bit 18 to bit 19 of word 11, to leave space for WIP X86_FEATURE_SGX_EDECCSSA bit
  x86/Kconfig: Enable kernel IBT by default
  x86,pm: Force out-of-line memcpy()
  objtool: Fix weak hole vs prefix symbol
  objtool: Optimize elf_dirty_reloc_sym()
  x86/cfi: Add boot time hash randomization
  x86/cfi: Boot time selection of CFI scheme
  x86/ibt: Implement FineIBT
  objtool: Add --cfi to generate the .cfi_sites section
  x86: Add prefix symbols for function padding
  objtool: Add option to generate prefix symbols
  objtool: Avoid O(bloody terrible) behaviour -- an ode to libelf
  objtool: Slice up elf_create_section_symbol()
  kallsyms: Revert "Take callthunks into account"
  x86: Unconfuse CONFIG_ and X86_FEATURE_ namespaces
  x86/retpoline: Fix crash printing warning
  x86/paravirt: Fix a !PARAVIRT build warning
  ...

Merge tag 'apparmor-pr-2022-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor

Pull apparmor updates from John Johansen:
 "Features:
   - switch to zstd compression for profile raw data

  Cleanups:
   - simplify obtaining the newest label on a cred
   - remove useless static inline functions
   - compute permission conversion on policy unpack
   - refactor code to share common permissins
   - refactor unpack to group policy backwards compatiblity code
   - add __init annotation to aa_{setup/teardown}_dfa_engine()

  Bug Fixes:
   - fix a memleak in
       - multi_transaction_new()
       - free_ruleset()
       - unpack_profile()
       - alloc_ns()
   - fix lockdep warning when removing a namespace
   - fix regression in stacking due to label flags
   - fix loading of child before parent
   - fix kernel-doc comments that differ from fns
   - fix spelling errors in comments
   - store return value of unpack_perms_table() to signed variable"

* tag 'apparmor-pr-2022-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor: (64 commits)
  apparmor: Fix uninitialized symbol 'array_size' in policy_unpack_test.c
  apparmor: Add __init annotation to aa_{setup/teardown}_dfa_engine()
  apparmor: Fix memleak in alloc_ns()
  apparmor: Fix memleak issue in unpack_profile()
  apparmor: fix a memleak in free_ruleset()
  apparmor: Fix spelling of function name in comment block
  apparmor: Use pointer to struct aa_label for lbs_cred
  AppArmor: Fix kernel-doc
  LSM: Fix kernel-doc
  AppArmor: Fix kernel-doc
  apparmor: Fix loading of child before parent
  apparmor: refactor code that alloc null profiles
  apparmor: fix obsoleted comments for aa_getprocattr() and audit_resource()
  apparmor: remove useless static inline functions
  apparmor: Fix unpack_profile() warn: passing zero to 'ERR_PTR'
  apparmor: fix uninitialize table variable in error in unpack_trans_table
  apparmor: store return value of unpack_perms_table() to signed variable
  apparmor: Fix kunit test for out of bounds array
  apparmor: Fix decompression of rawdata for read back to userspace
  apparmor: Fix undefined references to zstd_ symbols
  ...

Pull crypto updates from Herbert Xu:
 "API:
   - Optimise away self-test overhead when they are disabled
   - Support symmetric encryption via keyring keys in af_alg
   - Flip hwrng default_quality, the default is now maximum entropy

  Algorithms:
   - Add library version of aesgcm
   - CFI fixes for assembly code
   - Add arm/arm64 accelerated versions of sm3/sm4

  Drivers:
   - Remove assumption on arm64 that kmalloc is DMA-aligned
   - Fix selftest failures in rockchip
   - Add support for RK3328/RK3399 in rockchip
   - Add deflate support in qat
   - Merge ux500 into stm32
   - Add support for TEE for PCI ID 0x14CA in ccp
   - Add mt7986 support in mtk
   - Add MaxLinear platform support in inside-secure
   - Add NPCM8XX support in npcm"

* tag 'v6.2-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (184 commits)
  crypto: ux500/cryp - delete driver
  crypto: stm32/cryp - enable for use with Ux500
  crypto: stm32 - enable drivers to be used on Ux500
  dt-bindings: crypto: Let STM32 define Ux500 CRYP
  hwrng: geode - Fix PCI device refcount leak
  hwrng: amd - Fix PCI device refcount leak
  crypto: qce - Set DMA alignment explicitly
  crypto: octeontx2 - Set DMA alignment explicitly
  crypto: octeontx - Set DMA alignment explicitly
  crypto: keembay - Set DMA alignment explicitly
  crypto: safexcel - Set DMA alignment explicitly
  crypto: hisilicon/hpre - Set DMA alignment explicitly
  crypto: chelsio - Set DMA alignment explicitly
  crypto: ccree - Set DMA alignment explicitly
  crypto: ccp - Set DMA alignment explicitly
  crypto: cavium - Set DMA alignment explicitly
  crypto: img-hash - Fix variable dereferenced before check 'hdev->req'
  crypto: arm64/ghash-ce - use frame_push/pop macros consistently
  crypto: arm64/crct10dif - use frame_push/pop macros consistently
  crypto: arm64/aes-modes - use frame_push/pop macros consistently
  ...

Pull kernel hardening updates from Kees Cook:

 - Convert flexible array members, fix -Wstringop-overflow warnings, and
   fix KCFI function type mismatches that went ignored by maintainers
   (Gustavo A. R. Silva, Nathan Chancellor, Kees Cook)

 - Remove the remaining side-effect users of ksize() by converting
   dma-buf, btrfs, and coredump to using kmalloc_size_roundup(), add
   more __alloc_size attributes, and introduce full testing of all
   allocator functions. Finally remove the ksize() side-effect so that
   each allocation-aware checker can finally behave without exceptions

 - Introduce oops_limit (default 10,000) and warn_limit (default off) to
   provide greater granularity of control for panic_on_oops and
   panic_on_warn (Jann Horn, Kees Cook)

 - Introduce overflows_type() and castable_to_type() helpers for cleaner
   overflow checking

 - Improve code generation for strscpy() and update str*() kern-doc

 - Convert strscpy and sigphash tests to KUnit, and expand memcpy tests

 - Always use a non-NULL argument for prepare_kernel_cred()

 - Disable structleak plugin in FORTIFY KUnit test (Anders Roxell)

 - Adjust orphan linker section checking to respect CONFIG_WERROR (Xin
   Li)

 - Make sure siginfo is cleared for forced SIGKILL (haifeng.xu)

 - Fix um vs FORTIFY warnings for always-NULL arguments

* tag 'hardening-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (31 commits)
  ksmbd: replace one-element arrays with flexible-array members
  hpet: Replace one-element array with flexible-array member
  um: virt-pci: Avoid GCC non-NULL warning
  signal: Initialize the info in ksignal
  lib: fortify_kunit: build without structleak plugin
  panic: Expose "warn_count" to sysfs
  panic: Introduce warn_limit
  panic: Consolidate open-coded panic_on_warn checks
  exit: Allow oops_limit to be disabled
  exit: Expose "oops_count" to sysfs
  exit: Put an upper limit on how often we can oops
  panic: Separate sysctl logic from CONFIG_SMP
  mm/pgtable: Fix multiple -Wstringop-overflow warnings
  mm: Make ksize() a reporting-only function
  kunit/fortify: Validate __alloc_size attribute results
  drm/sti: Fix return type of sti_{dvo,hda,hdmi}_connector_mode_valid()
  drm/fsl-dcu: Fix return type of fsl_dcu_drm_connector_mode_valid()
  driver core: Add __alloc_size hint to devm allocators
  overflow: Introduce overflows_type() and castable_to_type()
  coredump: Proactively round up to kmalloc bucket size
  ...

Pull memblock updates from Mike Rapoport:
 "Extend test coverage:

   - add tests that trigger reallocation of memblock structures from
     memblock itself via memblock_double_array()

   - add tests for memblock_alloc_exact_nid_raw() that verify that
     requested node and memory range constraints are respected"

* tag 'memblock-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  memblock tests: remove completed TODO item
  memblock tests: add generic NUMA tests for memblock_alloc_exact_nid_raw
  memblock tests: add bottom-up NUMA tests for memblock_alloc_exact_nid_raw
  memblock tests: add top-down NUMA tests for memblock_alloc_exact_nid_raw
  memblock tests: introduce range tests for memblock_alloc_exact_nid_raw
  memblock test: Update TODO list
  memblock test: Add test to memblock_reserve() 129th region
  memblock test: Add test to memblock_add() 129th region

Pull orangefs updates from Mike Marshall:

 - fix problems with memory leaks on exit in sysfs and debufs (Zhang)

 - remove an unused variable and an unneeded assignment (Colin)

* tag 'for-linus-6.2-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
  orangefs: Fix kmemleak in orangefs_{kernel,client}_debug_init()
  orangefs: Fix kmemleak in orangefs_sysfs_init()
  orangefs: Fix kmemleak in orangefs_prepare_debugfs_help_string()
  orangefs: Fix sysfs not cleanup when dev init failed
  orangefs: remove redundant assignment to variable buffer_index
  orangefs: remove variable i

syzbot is reporting memory leak at fbcon_do_set_font() [1], for
commit a5a92303 ("fbdev: fbcon: Properly revert changes when
vc_resize() failed") missed that the buffer might be newly allocated
by fbcon_set_font().

Link: https://syzkaller.appspot.com/bug?extid=25bdb7b1703639abd498 [1]
Reported-by: syzbot <syzbot+25bdb7b1703639abd498@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot <syzbot+25bdb7b1703639abd498@syzkaller.appspotmail.com>
Fixes: a5a92303 ("fbdev: fbcon: Properly revert changes when vc_resize() failed")
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Helge Deller <deller@gmx.de>

Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Helge Deller <deller@gmx.de>

Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Helge Deller <deller@gmx.de>

When the remove() function is called, we know that the probe() function has
successfully been executed. So 'info' is known to be not NULL.

Simplify the code accordingly.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Helge Deller <deller@gmx.de>

If an error occurs after a successful uvesafb_init_mtrr() call, it must be
undone by a corresponding arch_phys_wc_del() call, as already done in the
remove function.

This has been added in the remove function in commit 63e28a7a
("uvesafb: Clean up MTRR code")

Fixes: 8bdb3a2d ("uvesafb: the driver core")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Helge Deller <deller@gmx.de>

The uvesafb fbdev driver uses memory management information that is not
available on ARCH=um, so don't allow this driver to be built on UML.

Prevents these build errors:

../drivers/video/fbdev/uvesafb.c: In function ‘uvesafb_vbe_init’:
../drivers/video/fbdev/uvesafb.c:807:21: error: ‘__supported_pte_mask’ undeclared (first use in this function)
  807 |                 if (__supported_pte_mask & _PAGE_NX) {
../drivers/video/fbdev/uvesafb.c:807:44: error: ‘_PAGE_NX’ undeclared (first use in this function)
  807 |                 if (__supported_pte_mask & _PAGE_NX) {

Fixes: 68f5d3f3 ("um: add PCI over virtio emulation driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Richard Weinberger <richard@nod.at>
Cc: linux-um@lists.infradead.org
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: Michal Januszewski <spock@gentoo.org>
Signed-off-by: Helge Deller <deller@gmx.de>

The geode fbdev driver uses struct cpuinfo fields that are not present
on ARCH=um, so don't allow this driver to be built on UML.

Prevents these build errors:

In file included from ../arch/x86/include/asm/olpc.h:7:0,
                 from ../drivers/mfd/cs5535-mfd.c:17:
../arch/x86/include/asm/geode.h: In function ‘is_geode_gx’:
../arch/x86/include/asm/geode.h:16:24: error: ‘struct cpuinfo_um’ has no member named ‘x86_vendor’
  return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
../arch/x86/include/asm/geode.h:16:39: error: ‘X86_VENDOR_NSC’ undeclared (first use in this function); did you mean ‘X86_VENDOR_ANY’?
  return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
../arch/x86/include/asm/geode.h:17:17: error: ‘struct cpuinfo_um’ has no member named ‘x86’
   (boot_cpu_data.x86 == 5) &&
../arch/x86/include/asm/geode.h:18:17: error: ‘struct cpuinfo_um’ has no member named ‘x86_model’
   (boot_cpu_data.x86_model == 5));
../arch/x86/include/asm/geode.h: In function ‘is_geode_lx’:
../arch/x86/include/asm/geode.h:23:24: error: ‘struct cpuinfo_um’ has no member named ‘x86_vendor’
  return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
../arch/x86/include/asm/geode.h:23:39: error: ‘X86_VENDOR_AMD’ undeclared (first use in this function); did you mean ‘X86_VENDOR_ANY’?
  return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
../arch/x86/include/asm/geode.h:24:17: error: ‘struct cpuinfo_um’ has no member named ‘x86’
   (boot_cpu_data.x86 == 5) &&
../arch/x86/include/asm/geode.h:25:17: error: ‘struct cpuinfo_um’ has no member named ‘x86_model’
   (boot_cpu_data.x86_model == 10));

Fixes: 68f5d3f3 ("um: add PCI over virtio emulation driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Richard Weinberger <richard@nod.at>
Cc: linux-um@lists.infradead.org
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: Andres Salomon <dilinger@queued.net>
Cc: linux-geode@lists.infradead.org
Signed-off-by: Helge Deller <deller@gmx.de>

The clk_disable_unprepare() should be called in the error handling
of register_framebuffer(), fix it.

Fixes: 0937a7b3 ("video: ep93xx: Prepare clock before using it")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>

The error handling code in fb_probe misses regulator_disable if
regulator_enable is called successfully. The previous commit only
adds regulator_disable in the .remove(), forgetting the error
handling code in the .probe.

Fix this by adding a new error label to call regulator_disable.

Fixes: 611097d5("fbdev: da8xx: add support for a regulator")
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Helge Deller <deller@gmx.de>

There is a spelling mistake in comment. Fix it.
Signed-off-by: Yu Zhe <yuzhe@nfschina.com>
Signed-off-by: Helge Deller <deller@gmx.de>

pci_get_device() will increase the reference count for the returned
pci_dev. For the error path, we need to use pci_dev_put() to decrease
the reference count.

Fixes: dbe7e429 ("vmlfb: framebuffer driver for Intel Vermilion Range")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>

The current error handling code in ufx_usb_probe have many unmatching
issues, e.g., missing ufx_free_usb_list, destroy_modedb label should
only include framebuffer_release, fb_dealloc_cmap only matches
fb_alloc_cmap.

My local syzkaller reports a memory leak bug:

memory leak in ufx_usb_probe

BUG: memory leak
unreferenced object 0xffff88802f879580 (size 128):
  comm "kworker/0:7", pid 17416, jiffies 4295067474 (age 46.710s)
  hex dump (first 32 bytes):
    80 21 7c 2e 80 88 ff ff 18 d0 d0 0c 80 88 ff ff  .!|.............
    00 d0 d0 0c 80 88 ff ff e0 ff ff ff 0f 00 00 00  ................
  backtrace:
    [<ffffffff814c99a0>] kmalloc_trace+0x20/0x90 mm/slab_common.c:1045
    [<ffffffff824d219c>] kmalloc include/linux/slab.h:553 [inline]
    [<ffffffff824d219c>] kzalloc include/linux/slab.h:689 [inline]
    [<ffffffff824d219c>] ufx_alloc_urb_list drivers/video/fbdev/smscufx.c:1873 [inline]
    [<ffffffff824d219c>] ufx_usb_probe+0x11c/0x15a0 drivers/video/fbdev/smscufx.c:1655
    [<ffffffff82d17927>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396
    [<ffffffff82712f0d>] call_driver_probe drivers/base/dd.c:560 [inline]
    [<ffffffff82712f0d>] really_probe+0x12d/0x390 drivers/base/dd.c:639
    [<ffffffff8271322f>] __driver_probe_device+0xbf/0x140 drivers/base/dd.c:778
    [<ffffffff827132da>] driver_probe_device+0x2a/0x120 drivers/base/dd.c:808
    [<ffffffff82713c27>] __device_attach_driver+0xf7/0x150 drivers/base/dd.c:936
    [<ffffffff82710137>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427
    [<ffffffff827136b5>] __device_attach+0x105/0x2d0 drivers/base/dd.c:1008
    [<ffffffff82711d36>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:487
    [<ffffffff8270e242>] device_add+0x642/0xdc0 drivers/base/core.c:3517
    [<ffffffff82d14d5f>] usb_set_configuration+0x8ef/0xb80 drivers/usb/core/message.c:2170
    [<ffffffff82d2576c>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238
    [<ffffffff82d16ffc>] usb_probe_device+0x5c/0x140 drivers/usb/core/driver.c:293
    [<ffffffff82712f0d>] call_driver_probe drivers/base/dd.c:560 [inline]
    [<ffffffff82712f0d>] really_probe+0x12d/0x390 drivers/base/dd.c:639
    [<ffffffff8271322f>] __driver_probe_device+0xbf/0x140 drivers/base/dd.c:778

Fix this bug by rewriting the error handling code in ufx_usb_probe.
Reported-by: syzkaller <syzkaller@googlegroups.com>
Tested-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Helge Deller <deller@gmx.de>

via_core_init() won't exit the driver when pci_register_driver() failed.
Exit the viafb-i2c and the viafb-gpio in failed path to prevent error.

VIA Graphics Integration Chipset framebuffer 2.4 initializing
Error: Driver 'viafb-i2c' is already registered, aborting...
Error: Driver 'viafb-gpio' is already registered, aborting...

Fixes: 7582eb9b ("viafb: Turn GPIO and i2c into proper platform devices")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>

Add missing pci_disable_device() in error path of probe() and remove() path.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>

Eliminate the follow coccicheck warning:

./drivers/video/fbdev/pxafb.c:2330:2-9: line 2330 is redundant because
platform_get_irq() already prints an error
Signed-off-by: KaiLong Wang <wangkailong@jari.cn>
Signed-off-by: Helge Deller <deller@gmx.de>

The driver is using gpiod API so it should include gpio/consumer.h and
not gpio.gh or of_gpio.h.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>

The driver does not use gpios, so there is no need to include gpio.h.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>

With f048e8c1 ("omapfb: panel-lgphilips-lb035q02: Remove legacy boot
support") it is no longer possible to specify GPIO to control the
backlight. Remove code trying to request and toggle it.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>

The driver has been switched to gpiod API, so it should include
gpio/consumer.h instead of gpio.h and of_gpio.h.

With of_gpio.h no longer included we need mod_devicetable.h for
of_device_id definition.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>

There are no users of connector_atv_platform_data in the mainline
kernel so support for it can be removed from the panel driver.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>