There is no need to free the reset_data structure if the recovery is
unsuccessful and the reset is synchronous. The function
adf_dev_aer_schedule_reset() handles the cleanup properly. Only
asynchronous resets require such structure to be freed inside the reset
worker.

Fixes: d8cba25d ("crypto: qat - Intel(R) QAT driver framework")
Signed-off-by: Svyatoslav Pankratov <svyatoslav.pankratov@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Implement a ->digest function for sha256-ssse3, sha256-avx, sha256-avx2,
and sha256-ni.  This improves the performance of crypto_shash_digest()
with these algorithms by reducing the number of indirect calls that are
made.

For now, don't bother with this for sha224, since sha224 is rarely used.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Implement a ->digest function for sha256-ce.  This improves the
performance of crypto_shash_digest() with this algorithm by reducing the
number of indirect calls that are made.  This only adds ~112 bytes of
code, mostly for the inlined init, as the finup function is tail-called.

For now, don't bother with this for sha224, since sha224 is rarely used.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fold shash_digest_unaligned() into its only remaining caller.  Also,
avoid a redundant check of CRYPTO_TFM_NEED_KEY by replacing the call to
crypto_shash_init() with shash->init(desc).  Finally, replace
shash_update_unaligned() + shash_final_unaligned() with
shash_finup_unaligned() which does exactly that.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

For an shash algorithm that doesn't implement ->digest, currently
crypto_shash_digest() with aligned input makes 5 indirect calls: 1 to
shash_digest_unaligned(), 1 to ->init, 2 to ->update ('alignmask + 1'
bytes, then the rest), then 1 to ->final.  This is true even if the
algorithm implements ->finup.  This is caused by an unnecessary fallback
to code meant to handle unaligned inputs.  In fact,
crypto_shash_digest() already does the needed alignment check earlier.
Therefore, optimize the number of indirect calls for aligned inputs to 3
when the algorithm implements ->finup.  It remains at 5 when the
algorithm implements neither ->finup nor ->digest.

Similarly, for an shash algorithm that doesn't implement ->finup,
currently crypto_shash_finup() with aligned input makes 4 indirect
calls: 1 to shash_finup_unaligned(), 2 to ->update, and
1 to ->final.  Optimize this to 3 calls.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Since commit adad556e ("crypto: api - Fix built-in testing
dependency failures"), the following warning appears when booting an
x86_64 kernel that is configured with
CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y and CONFIG_CRYPTO_AES_NI_INTEL=y,
even when CONFIG_CRYPTO_XTS=y and CONFIG_CRYPTO_AES=y:

    alg: skcipher: skipping comparison tests for xts-aes-aesni because xts(ecb(aes-generic)) is unavailable

This is caused by an issue in the xts template where it allocates an
"aes" single-block cipher without declaring a dependency on it via the
crypto_spawn mechanism.  This issue was exposed by the above commit
because it reversed the order that the algorithms are tested in.

Specifically, when "xts(ecb(aes-generic))" is instantiated and tested
during the comparison tests for "xts-aes-aesni", the "xts" template
allocates an "aes" crypto_cipher for encrypting tweaks.  This resolves
to "aes-aesni".  (Getting "aes-aesni" instead of "aes-generic" here is a
bit weird, but it's apparently intended.)  Due to the above-mentioned
commit, the testing of "aes-aesni", and the finalization of its
registration, now happens at this point instead of before.  At the end
of that, crypto_remove_spawns() unregisters all algorithm instances that
depend on a lower-priority "aes" implementation such as "aes-generic"
but that do not depend on "aes-aesni".  However, because "xts" does not
use the crypto_spawn mechanism for its "aes", its dependency on
"aes-aesni" is not recognized by crypto_remove_spawns().  Thus,
crypto_remove_spawns() unexpectedly unregisters "xts(ecb(aes-generic))".

Fix this issue by making the "xts" template use the crypto_spawn
mechanism for its "aes" dependency, like what other templates do.

Note, this fix could be applied as far back as commit f1c131b4
("crypto: xts - Convert to skcipher").  However, the issue only got
exposed by the much more recent changes to how the crypto API runs the
self-tests, so there should be no need to backport this to very old
kernels.  Also, an alternative fix would be to flip the list iteration
order in crypto_start_tests() to restore the original testing order.
I'm thinking we should do that too, since the original order seems more
natural, but it shouldn't be relied on for correctness.

Fixes: adad556e ("crypto: api - Fix built-in testing dependency failures")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

MST pointed out: config change callback is also handled incorrectly
in this driver, it takes a mutex from interrupt context.

Handle config changed by work queue instead.

Cc: Gonglei (Arei) <arei.gonglei@huawei.com>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

If the temporarily applied memory is used to set or get the xqc
information, the driver releases the memory immediately after the
hardware mailbox operation time exceeds the driver waiting time.
However, the hardware does not cancel the operation, so the hardware
may write data to released memory.

Therefore, when the driver is bound to a device, the driver reserves
memory for the xqc configuration. The subsequent xqc configuration
uses the reserved memory to prevent hardware from accessing the
released memory.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In case a health test error occurs during runtime, the power-up health
tests are rerun to verify that the noise source is still good and
that the reported health test error was an outlier. For performing this
power-up health test, the already existing entropy collector instance
is used instead of allocating a new one. This change has the following
implications:

* The noise that is collected as part of the newly run health tests is
  inserted into the entropy collector and thus stirs the existing
  data present in there further. Thus, the entropy collected during
  the health test is not wasted. This is also allowed by SP800-90B.

* The power-on health test is not affected by the state of the entropy
  collector, because it resets the APT / RCT state. The remainder of
  the state is unrelated to the health test as it is only applied to
  newly obtained time stamps.

This change also fixes a bug report about an allocation while in an
atomic lock (the lock is taken in jent_kcapi_random, jent_read_entropy
is called and this can call jent_entropy_init).

Fixes: 04597c8d ("jitter - add RCT/APT support for different OSRs")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Neal Liu <neal_liu@aspeedtech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The Compress and Verify (CnV) feature check and ensures data integrity
in the compression operation. The implementation of CnV keeps a record
of the CnV errors that have occurred since the driver was loaded.

Expose CnV error stats by providing the "cnv_errors" file under
debugfs. This includes the number of errors detected up to now and
the type of the last error. The error count is provided on a per
Acceleration Engine basis and it is reset every time the driver is loaded.
Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

QAT devices implement a mechanism that allows them to go autonomously
to a low power state depending on the load.

Expose power management info by providing the "pm_status" file under
debugfs. This includes PM state, PM event log, PM event counters, PM HW
CSRs, per-resource type constrain counters and per-domain power gating
status specific to the QAT device.

This information is retrieved from (1) the FW by means of
ICP_QAT_FW_PM_INFO command, (2) CSRs and (3) counters collected by the
device driver.

In addition, add logic to keep track and report power management event
interrupts and acks/nacks sent to FW to allow/prevent state transitions.
Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Include kernel.h for GENMASK(), kstrtobool() and types.

Add forward declaration for struct adf_accel_dev. Remove unneeded
include.

This change doesn't introduce any function change.
Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add hw_random interface support in qcom-rng driver as new IP block
in Qualcomm SoC has inbuilt NIST SP800 90B compliant entropic source
to generate true random number.

Keeping current rng_alg interface as well for random number generation
using Kernel Crypto API.
Signed-off-by: Om Prakash Singh <quic_omprsing@quicinc.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Om Prakash Singh <quic_omprsing@quicinc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Document SM8550 compatible for the True Random Number Generator.
Reviewed-by: Om Prakash Singh <quic_omprsing@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

It has been reported at [1] the RNG HW on SM8450 is in fact a True Random
Number Generator and no more Pseudo, document this by adding
a new qcom,trng and the corresponding SoC specific sm8450 compatible.

[1] https://lore.kernel.org/all/20230818161720.3644424-1-quic_omprsing@quicinc.com/Suggested-by: Om Prakash Singh <quic_omprsing@quicinc.com>
Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Om Prakash Singh <quic_omprsing@quicinc.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

As skcipher spawn users can no longer assume the spawn is of type
struct skcipher_alg, these helpers are no longer used.  Remove them.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

As skcipher spawns may be of the type lskcipher, only the common
fields may be accessed.  This was already the case but use the
correct helpers to make this more obvious.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

As skcipher spawns may be of the type lskcipher, only the common
fields may be accessed.  This was already the case but use the
correct helpers to make this more obvious.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

As skcipher spawns may be of the type lskcipher, only the common
fields may be accessed.  This was already the case but use the
correct helpers to make this more obvious.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

As skcipher spawns may be of the type lskcipher, only the common
fields may be accessed.  This was already the case but use the
correct helpers to make this more obvious.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

As skcipher spawns may be of the type lskcipher, only the common
fields may be accessed.  This was already the case but use the
correct helpers to make this more obvious.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

As skcipher spawns may be of the type lskcipher, only the common
fields may be accessed.  This was already the case but use the
correct helpers to make this more obvious.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

As skcipher spawns may be of the type lskcipher, only the common
fields may be accessed.  This was already the case but use the
correct helpers to make this more obvious.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

As skcipher spawns may be of the type lskcipher, only the common
fields may be accessed.  This was already the case but use the
correct helpers to make this more obvious.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

As skcipher spawns may be of the type lskcipher, only the common
fields may be accessed.  This was already the case but use the
correct helpers to make this more obvious.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

As skcipher spawns may be of the type lskcipher, only the common
fields may be accessed.  This was already the case but use the
correct helpers to make this more obvious.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

As skcipher spawns may be of the type lskcipher, only the common
fields may be accessed.  This was already the case but use the
correct helpers to make this more obvious.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

As skcipher spawns may be of the type lskcipher, only the common
fields may be accessed.  This was already the case but use the
correct helpers to make this more obvious.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add code to handle an underlying lskcihper object when grabbing
an skcipher spawn.

Fixes: 31865c4c ("crypto: skcipher - Add lskcipher")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

As skcipher spawns can be of two different types (skcipher vs.
lskcipher), only the common fields can be accessed.  Add a helper
to return the common algorithm object.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Replace skcipher implementation with lskcipher.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

As lskcipher requires the ecb wrapper for the transition add an
explicit dependency on it so that it is always present.  This can
be removed once all simple ciphers have been converted to lskcipher.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Fixes: 705b52fe ("crypto: cbc - Convert from skcipher to lskcipher")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Create CRYPTO_QAT namespace for symbols exported by the qat_common
module and import those in the QAT drivers. It will reduce the global
namespace crowdedness and potential misuse or the API.

This does not introduce any functional change.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove zlib-deflate test vectors as it no longer exists in the kernel.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>

Remove the implementation of zlib-deflate because it is completely
unused in the kernel.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>

Remove the implementation of zlib-deflate because it is completely
unused in the kernel.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>

Remove support for md4 md5 hash and signatures in x.509 certificate
parsers, pkcs7 signature parser, authenticode parser.

All of these are insecure or broken, and everyone has long time ago
migrated to alternative hash implementations.

Also remove md2 & md3 oids which have already didn't have support.

This is also likely the last user of md4 in the kernel, and thus
crypto/md4.c and related tests in tcrypt & testmgr can likely be
removed. Other users such as cifs smbfs ext modpost sumversions have
their own internal implementation as needed.
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Correct typo of "destination".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>