- 23 Feb, 2009 4 commits
-
-
Stephen Hemminger authored
Mark some strings as const. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Get rid of compile warning about non-const format Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Extend existing reverse path filter option to allow strict or loose filtering. (See http://en.wikipedia.org/wiki/Reverse_path_filtering). For compatibility with existing usage, the value 1 is chosen for strict mode and 2 for loose mode. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
This reverts commit 7d3d5ec1. Russell is going to merge this in via the ARM tree. Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 22 Feb, 2009 3 commits
-
-
Herbert Xu authored
Our TCP stack does not set the urgent flag if the urgent pointer does not fit in 16 bits, i.e., if it is more than 64K from the sequence number of a packet. This behaviour is different from the BSDs, and clearly contradicts the purpose of urgent mode, which is to send the notification (though not necessarily the associated data) as soon as possible. Our current behaviour may in fact delay the urgent notification indefinitely if the receiver window does not open up. Simply matching BSD however may break legacy applications which incorrectly rely on the out-of-band delivery of urgent data, and conversely the in-band delivery of non-urgent data. Alexey Kuznetsov suggested a safe solution of following BSD only if the urgent pointer itself has not yet been transmitted. This way we guarantee that when the remote end sees the packet with non-urgent data marked as urgent due to wrap-around we would have advanced the urgent pointer beyond, either to the actual urgent data or to an as-yet untransmitted packet. The only potential downside is that applications on the remote end may see multiple SIGURG notifications. However, this would occur anyway with other TCP stacks. More importantly, the outcome of such a duplicate notification is likely to be harmless since the signal itself does not carry any information other than the fact that we're in urgent mode. Thanks to Ilpo Järvinen for fixing a critical bug in this and Jeff Chua for reporting that bug. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
Further to a71558d0, this is round five of fixes to make etherh work again. As mainline kernels stand, the fixes in b9a9b4b0 were the wrong approach. The 8390 driver was structured by Al Viro to allow the flexibility required by platforms. lib8390.c contains the core code which drivers explicitly include: - 8390.c includes lib8390.c to provide the standard ISA based driver. - etherh.c includes it with the accessors defined for RiscPC platforms, where it is addressed via the MMIO accessors with a device dependent register spacing. Other platform drivers do something similar. However, b9a9b4b0 caused the kernel to contain not only the etherh private build of lib8390 (included in etherh.c) but also lib8390.c itself, and referred the new net_device_ops methods to the ISA version. The result of this is is not pretty: Unable to handle kernel paging request at virtual address 12032030 pgd = c8330000 [12032030] *pgd=00000000 Internal error: Oops: 18331805 [#1] Modules linked in: ipv6 CPU: 0 Not tainted (2.6.29-rc3 #167) PC is at do_set_multicast_list+0xd0/0x190 LR is at bitrev32+0x28/0x34 pc : [<c017aab4>] lr : [<c0139120>] psr: a0000093 sp : c8321d9c ip : c8321d84 fp : c8321dbc r10: c80c6800 r9 : 00000000 r8 : c80c6b60 r7 : c80c6b80 r6 : cc80c800 r5 : c80c6800 r4 : 00000000 r3 : cc80c80c r2 : 00000004 r1 : 00000007 r0 : e0000000 Flags: NzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user ... Fix up b9a9b4b0 by making etherh's net_device_ops refer to the internal lib8390 functions, and remove the build of the ISA 8390.c driver. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hannes Eder authored
Fix this sparse warning: net/ipv6/xfrm6_state.c:72:26: warning: Using plain integer as NULL pointer Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 21 Feb, 2009 2 commits
-
-
Don Skidmore authored
The failure happens when an interrupt occurs and the driver is reading EICR. This read will cause a clear-by-read which leads to two TLP being inserted in the PCIe retry buffer leading to an overflow of the buffer and corruption of TLPs. The solution is different depending where the reading of EICR takes place. For ixgbe_msix_lsc() since we are in MSIX mode and know OCD is enabled a clear-by-write is done instead of the normal clear-by-read. For ixgbe_intr() 0xffffffff is written to EIMC before the read, masking the interrupts. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Patrick Ohly authored
The current implementation of the TX software time stamping fallback is faulty because it accesses the skb after ndo_start_xmit() returns successfully. This patch removes the fallback, which fixes kernel panics seen during stress tests. Hardware time stamping is not affected by this removal. Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 20 Feb, 2009 9 commits
-
-
Pablo Neira Ayuso authored
This patch adds NETLINK_BROADCAST_ERROR which is a netlink socket option that the listener can set to make netlink_broadcast() return errors in the delivery to the caller. This option is useful if the caller of netlink_broadcast() do something with the result of the message delivery, like in ctnetlink where it drops a network packet if the event delivery failed, this is used to enable reliable logging and state-synchronization. If this socket option is not set, netlink_broadcast() only reports ESRCH errors and silently ignore ENOBUFS errors, which is what most netlink_broadcast() callers should do. This socket option is based on a suggestion from Patrick McHardy. Patrick McHardy can exchange this patch for a beer from me ;). Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Santwona Behera authored
Signed-off-by: Santwona Behera <santwona.behera@sun.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Santwona Behera authored
Signed-off-by: Santwona Behera <santwona.behera@sun.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Klein authored
Added missing set_bit() to disable data transfer when a memchange notification is handled Signed-off-by: Thomas Klein <tklein@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexander Duyck authored
This code adds a module parameter called num_vfs which defines if the driver should attempt to use sr-iov and if so how many VFs should be enabled. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexander Duyck authored
This patch adds the support to handle requests from the VF to perform operations such as completing resets, setting/reading mac address, adding vlans, adding multicast addresses, setting rlpml, and general communications between the PF and all VFs. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexander Duyck authored
Add the pf portion of vmdq support. This provides enough support so that VMDq is enabled, and the pf is functional without enabling vfs. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexander Duyck authored
This is the first step in supporting sr-iov. The vf_allocated_count value will be 0 until we actually have vfs present. In the meantime it represents an offset value for the start of the queues. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexander Duyck authored
igb is currently not returning the correct values for napi. In addition it is doing more work than necessary since it will not exit polling until work_done is equal to zero. This patch makes the following changes: 1. Consolidates msi-x and non-msi polling routines. 2. Corrects return values for polling routines. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 19 Feb, 2009 9 commits
-
-
Breno Leitao authored
Removing the unused macro PAGE_USE_COUNT(), since there is no more reference to it. The last reference was removed by Jesse's commit number 630b25cd. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hannes Eder authored
Impact: Move variable declaration as far inner as possible. Fix this sparse warning: drivers/net/igb/igb_main.c:1895:21: warning: symbol 'j' shadows an earlier one drivers/net/igb/igb_main.c:1855:16: originally declared here Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Roel Kluin authored
Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jesse Brandeburg authored
During the move of support for PCIe devices from e1000 to e1000e, this workaround necessary only for older non-PCIe devices was mistakenly copied into e1000e. Remove it. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jeff Kirsher authored
To match ixgbe GRO functionality, we remove the LRO (which is now GRO) Kconfig option which enables GRO by default. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Krishna Kumar authored
Optimize skb_tx_hash() by eliminating a comparison that executes for every packet. skb_tx_hashrnd initialization is moved to a later part of the startup sequence, namely after the "random" driver is initialized. Rebooted the system three times and verified that the code generates different random numbers each time. Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Constantin Baranov authored
Introduced support for link speed and duplex setting (ethtool -s), link advertising parameters and autonegotiation (ethtool -r): - struct niu_link_config: split advertising and autoneg fields into active and target values (similar to speed and duplex fields) - mii_init_common(): rewrite function to actually apply requested niu_link_config parameters instead of providing default initialization - link_status_1g(): move parsing of MII registers into new link_status_mii() function (link_status_1g_rgmii() could possibly use this new implementation too) - introduce simple nway_reset method - fix incorrect XMAC_CONFIG_MODE selection for 10Mbps case Signed-off-by: Constantin Baranov <baranov@mercdev.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Constantin Baranov authored
Fixed a typo in niu_determine_phy_disposition() which resulted in phy_template_1g_copper being selected for 10G/copper configuration. Signed-off-by: Constantin Baranov <baranov@mercdev.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hannes Eder authored
Impact: Include the header file. If CONFIG_SFC_MTD is not defined then the functions 'efx_mtd_remove' and 'efx_mtd_rename' are defined 'static inline' with an empty function body in the header file, but the the whole file mtd.c is not built in this case. Fix this sparse warnings: drivers/net/sfc/mtd.c:204:6: warning: symbol 'efx_mtd_remove' was not declared. Should it be static? drivers/net/sfc/mtd.c:221:6: warning: symbol 'efx_mtd_rename' was not declared. Should it be static? drivers/net/sfc/mtd.c:230:5: warning: symbol 'efx_mtd_probe' was not declared. Should it be static? Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 18 Feb, 2009 13 commits
-
-
Dhananjay Phadke authored
If for some reason, read from card memory fails the console get flooded with failure prints. This patch confines print under printk_ratelimit(). Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dhananjay Phadke authored
Fix following sparse warnings (multiple instances) warning: restricted degrades to integer warning: cast to restricted type warning: incorrect type in argument 3 (different signedness) warning: context imbalance in 'netxen_nic_hw_write_wx_2M' - different lock contexts for basic block Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dhananjay Phadke authored
For NX3031 pci doorbells are not used. If unnecessary mapping of doorbell space fails, pci probe bails out. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hannes Eder authored
Impact: Remove the write-only field 'current_ring_status' completely. Fix this sparse warnings: drivers/net/tokenring/smctr.c:4410:52: warning: cast truncates bits from constant value (100 becomes 0) drivers/net/tokenring/smctr.c:4415:52: warning: cast truncates bits from constant value (400 becomes 0) drivers/net/tokenring/smctr.c:4420:52: warning: cast truncates bits from constant value (800 becomes 0) drivers/net/tokenring/smctr.c:4425:52: warning: cast truncates bits from constant value (1000 becomes 0) drivers/net/tokenring/smctr.c:4430:52: warning: cast truncates bits from constant value (2000 becomes 0) drivers/net/tokenring/smctr.c:4435:52: warning: cast truncates bits from constant value (4000 becomes 0) drivers/net/tokenring/smctr.c:4440:52: warning: cast truncates bits from constant value (8000 becomes 0) Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hannes Eder authored
Fix sparse warning: drivers/net/wireless/prism54/isl_ioctl.c:2997:32: warning: incorrect type in argument 2 (different signedness) drivers/net/wireless/prism54/oid_mgt.c:712:42: warning: incorrect type in argument 2 (different signedness) Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hannes Eder authored
Fix this sparse warnings: drivers/net/wireless/ipw2x00/ipw2100.c:1930:43: warning: incorrect type in argument 4 (different signedness) drivers/net/wireless/ipw2x00/ipw2100.c:1938:76: warning: incorrect type in argument 4 (different signedness) drivers/net/wireless/ipw2x00/ipw2100.c:1946:67: warning: incorrect type in argument 4 (different signedness) drivers/net/wireless/ipw2x00/ipw2100.c:1953:72: warning: incorrect type in argument 4 (different signedness) drivers/net/wireless/ipw2x00/ipw2100.c:4071:73: warning: incorrect type in argument 4 (different signedness) drivers/net/wireless/ipw2x00/ipw2100.c:4078:43: warning: incorrect type in argument 4 (different signedness) drivers/net/wireless/ipw2x00/ipw2100.c:4084:67: warning: incorrect type in argument 4 (different signedness) drivers/net/wireless/ipw2x00/ipw2100.c:7141:73: warning: incorrect type in argument 4 (different signedness) drivers/net/wireless/ipw2x00/ipw2100.c:8317:48: warning: incorrect type in argument 4 (different signedness) Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hannes Eder authored
Fix this compilation warning: drivers/net/wireless/b43/main.c: In function 'b43_print_fw_helptext': drivers/net/wireless/b43/main.c:1971: warning: format not a string literal and no format arguments drivers/net/wireless/b43/main.c:1973: warning: format not a string literal and no format arguments Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hannes Eder authored
Impact: Make symbols static. Fix this sparse warnings: drivers/net/wireless/ath9k/eeprom.c:1343:5: warning: symbol 'ath9k_hw_4k_get_spur_channel' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:1372:19: warning: symbol 'eep_4k_ops' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:2649:5: warning: symbol 'ath9k_hw_def_get_spur_channel' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:2678:19: warning: symbol 'eep_def_ops' was not declared. Should it be static? Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hannes Eder authored
Fix this sparse warnings: drivers/net/wireless/airo.c:2102:21: warning: incorrect type in initializer (different signedness) drivers/net/wireless/airo.c:2126:21: warning: incorrect type in initializer (different signedness) drivers/net/wireless/airo.c:2167:21: warning: incorrect type in initializer (different signedness) drivers/net/wireless/airo.c:2191:21: warning: incorrect type in initializer (different signedness) Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hannes Eder authored
Impact: Move variable closer to usage resp. remove redundant variables resp. rename function scope variable. Fix this sparse warnings: drivers/net/wireless/airo.c:3840:29: warning: symbol 'i' shadows an earlier one drivers/net/wireless/airo.c:3751:13: originally declared here drivers/net/wireless/airo.c:3847:29: warning: symbol 'i' shadows an earlier one drivers/net/wireless/airo.c:3751:13: originally declared here drivers/net/wireless/airo.c:3861:21: warning: symbol 'i' shadows an earlier one drivers/net/wireless/airo.c:3751:13: originally declared here drivers/net/wireless/wavelan.c:43:13: warning: symbol 'irq' shadows an earlier one drivers/net/wireless/wavelan.p.h:692:17: originally declared here Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hannes Eder authored
Impact: Attribute function with __acquires(...) resp. __releases(...). Fix this sparse warnings: drivers/net/wireless/strip.c:955:21: warning: context imbalance in 'strip_seq_start' - wrong count at exit drivers/net/wireless/strip.c:975:13: warning: context imbalance in 'strip_seq_stop' - unexpected unlock Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hannes Eder authored
Impact: Rename function scope variable and while being at it fix some coding style issues. Fix this sparse warning: drivers/net/wan/sbni.c:1526:14: warning: symbol 'num' shadows an earlier one drivers/net/wan/sbni.c:160:13: originally declared here Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hannes Eder authored
Impact: Use 'static const char[]' instead of 'static char[]'. Fix this compilation warnings: drivers/net/wan/lapbether.c: In function 'lapbeth_init_driver': drivers/net/wan/lapbether.c:441: warning: format not a string literal and no format arguments drivers/net/wan/z85230.c: In function 'z85230_init_driver': drivers/net/wan/z85230.c:1782: warning: format not a string literal and no format arguments Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-