- 08 Dec, 2010 15 commits
-
-
Rabin Vincent authored
Rework gpio registration to remove build-time changing macros. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
-
Rabin Vincent authored
Platforms may choose not to provide an additional name for the GPIO block. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
-
Carl-Johan Irekvist authored
The uncompress code for zImage uses the UART to print status messages, this was hard coded to use UART2 for the U8500 platform. This patch checks at run time which platform it is run on. U5500 uses UART0 as console UART. Signed-off-by: Carl-Johan Irekvist <carl-johan.irekvist@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
-
Per Forlin authored
Add basic DMA configuration for u5500 supporting memcpy. Make way for SDI0 dma support by setting SDI0 to -1, indicating it will be configured in runtime. Signed-off-by: Per Forlin <per.forlin@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
-
Per Forlin authored
U5500 now boots from sdi0 (onboard eMMC). Change machine type to U5500. Adjust uart and sdi0 clock rates for u5500. All necessary clocks must be enabled before Linux starts because there is no clock tree support in u5500 yet. Signed-off-by: Per Forlin <per.forlin@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
-
Per Forlin authored
PRCMU driver only supports u8500. Don't initialize prcmu if running on u5500. Signed-off-by: Per Forlin <per.forlin@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
-
Sundar Iyer authored
Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
-
Sundar Iyer authored
PRCM_TCR enables the various timers in the system. This must be achieved before any of the MTUs are usable for kernel usage. Explicit enabling of this in the kernel makes it independent of bootloader actions. Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
-
Rabin Vincent authored
In the nomadik GPIO pin configuration, allow the sleep mode direction and pull configurations to differ from the ones for the normal state. PIN_SLPM_PULL_*, PIN_SLPM_INPUT, PIN_SLPM_OUTPUT* macros are provided for this. Since the hardware does not allow seperate configurations for sleep mode and normal mode, this is implemented by having software remux the configurations as necessary. Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
-
Linus Walleij authored
A small fixup for the v1(.0) ASIC. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
-
Mattias Wallin authored
This patch removes the dublicated define for number of interrupts and instead include the needed header file. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
-
Mattias Wallin authored
This patch adds support for db8500 chip version 2. The TCDM memory address of the PRCMU is changed and dynamic detection of that is added. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com>
-
Rabin Vincent authored
Change the Ux500 devices to be dynamically allocated and added by calling functions instead of referencing structures, thereby allowing 5500 and other derivatives' support to be added without having to duplicate structures, use fixup functions, or use compile-time macros. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
-
Linus Walleij authored
Similar to the patch to MMCI this silences similar messages from the platform code. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
-
Rabin Vincent authored
Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
-
- 30 Nov, 2010 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Use call_rcu_sched() for pagetables
-
- 29 Nov, 2010 18 commits
-
-
Peter Zijlstra authored
PowerPC relies on IRQ-disable to guard against RCU quiecent states, use the appropriate RCU call version. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Dave Airlie authored
This reverts commit e0fdace1. On-list discussion seems to suggest that the robustness fixes for printk make this unnecessary and DaveM has also agreed in person at Kernel Summit and on list. The main problem with this code is once we hit a lockdep splat we always keep oops_in_progress set, the console layer uses oops_in_progress with KMS to decide when it should be showing the oops and not showing X, so it causes problems around suspend/resume time when a userspace resume can cause a console switch away from X, only if oops_in_progress is set (which is what we want if an oops actually is in progress, but not because we had a lockdep splat 2 days prior). Cc: David S Miller <davem@davemloft.net> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: tpm: Autodetect itpm devices
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (27 commits) af_unix: limit recursion level pch_gbe driver: The wrong of initializer entry pch_gbe dreiver: chang author ucc_geth: fix ucc halt problem in half duplex mode inet: Fix __inet_inherit_port() to correctly increment bsockets and num_owners ehea: Add some info messages and fix an issue hso: fix disable_net NET: wan/x25_asy, move lapb_unregister to x25_asy_close_tty cxgb4vf: fix setting unicast/multicast addresses ... net, ppp: Report correct error code if unit allocation failed DECnet: don't leak uninitialized stack byte au1000_eth: fix invalid address accessing the MAC enable register dccp: fix error in updating the GAR tcp: restrict net.ipv4.tcp_adv_win_scale (#20312) netns: Don't leak others' openreq-s in proc Net: ceph: Makefile: Remove unnessary code vhost/net: fix rcu check usage econet: fix CVE-2010-3848 econet: fix CVE-2010-3850 econet: disallow NULL remote addr for sendmsg(), fixes CVE-2010-3849 ...
-
Linus Torvalds authored
Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: OMAP2+: PM/serial: hold console semaphore while OMAP UARTs are disabled OMAP: UART: don't resume UARTs that are not enabled.
-
Matthew Garrett authored
Some Lenovos have TPMs that require a quirk to function correctly. This can be autodetected by checking whether the device has a _HID of INTC0102. This is an invalid PNPid, and as such is discarded by the pnp layer - however it's still present in the ACPI code, so we can pull it out that way. This means that the quirk won't be automatically applied on non-ACPI systems, but without ACPI we don't have any way to identify the chip anyway so I don't think that's a great concern. Signed-off-by: Matthew Garrett <mjg@redhat.com> Acked-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Tested-by: Jiri Kosina <jkosina@suse.cz> Tested-by: Andy Isaacson <adi@hexapodia.org> Signed-off-by: James Morris <jmorris@namei.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (24 commits) Btrfs: don't use migrate page without CONFIG_MIGRATION Btrfs: deal with DIO bios that span more than one ordered extent Btrfs: setup blank root and fs_info for mount time Btrfs: fix fiemap Btrfs - fix race between btrfs_get_sb() and umount Btrfs: update inode ctime when using links Btrfs: make sure new inode size is ok in fallocate Btrfs: fix typo in fallocate to make it honor actual size Btrfs: avoid NULL pointer deref in try_release_extent_buffer Btrfs: make btrfs_add_nondir take parent inode as an argument Btrfs: hold i_mutex when calling btrfs_log_dentry_safe Btrfs: use dget_parent where we can UPDATED Btrfs: fix more ESTALE problems with NFS Btrfs: handle NFS lookups properly btrfs: make 1-bit signed fileds unsigned btrfs: Show device attr correctly for symlinks btrfs: Set file size correctly in file clone btrfs: Check if dest_offset is block-size aligned before cloning file Btrfs: handle the space_cache option properly btrfs: Fix early enospc because 'unused' calculated with wrong sign. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC: Fix typos in Documentation/edac.txt EDAC, MCE: Fix edac_init_mce_inject error handling EDAC: Remove deprecated kbuild goal definitions
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixesLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes: GFS2: Userland expects quota limit/warn/usage in 512b blocks
-
Eric Dumazet authored
Its easy to eat all kernel memory and trigger NMI watchdog, using an exploit program that queues unix sockets on top of others. lkml ref : http://lkml.org/lkml/2010/11/25/8 This mechanism is used in applications, one choice we have is to have a recursion limit. Other limits might be needed as well (if we queue other types of files), since the passfd mechanism is currently limited by socket receive queue sizes only. Add a recursion_level to unix socket, allowing up to 4 levels. Each time we send an unix socket through sendfd mechanism, we copy its recursion level (plus one) to receiver. This recursion level is cleared when socket receive queue is emptied. Reported-by: Марк Коренберг <socketpair@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Toshiharu Okada authored
The wrong of initializer entry was modified. Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Reported-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Toshiharu Okada authored
This driver's AUTHOR was changed to "Toshiharu Okada" from "Masayuki Ohtake". I update the Kconfig, renamed "Topcliff" to "EG20T". Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Chris Mason authored
Fixes compile error Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Yang Li authored
In commit 58933c64(ucc_geth: Fix the wrong the Rx/Tx FIFO size), the UCC_GETH_UTFTT_INIT is set to 512 based on the recommendation of the QE Reference Manual. But that will sometimes cause tx halt while working in half duplex mode. According to errata draft QE_GENERAL-A003(High Tx Virtual FIFO threshold size can cause UCC to halt), setting UTFTT less than [(UTFS x (M - 8)/M) - 128] will prevent this from happening (M is the minimum buffer size). The patch changes UTFTT back to 256. Signed-off-by: Li Yang <leoli@freescale.com> Cc: Jean-Denis Boyer <jdboyer@media5corp.com> Cc: Andreas Schmitz <Andreas.Schmitz@riedel.net> Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nagendra Tomar authored
inet sockets corresponding to passive connections are added to the bind hash using ___inet_inherit_port(). These sockets are later removed from the bind hash using __inet_put_port(). These two functions are not exactly symmetrical. __inet_put_port() decrements hashinfo->bsockets and tb->num_owners, whereas ___inet_inherit_port() does not increment them. This results in both of these going to -ve values. This patch fixes this by calling inet_bind_hash() from ___inet_inherit_port(), which does the right thing. 'bsockets' and 'num_owners' were introduced by commit a9d8f911 (inet: Allowing more than 64k connections and heavily optimize bind(0)) Signed-off-by: Nagendra Singh Tomar <tomer_iisc@yahoo.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Breno Leitao authored
This patch adds some debug information about ehea not being able to allocate enough spaces. Also it correctly updates the amount of available skb. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Chris Mason authored
The new DIO bio splitting code has problems when the bio spans more than one ordered extent. This will happen as the generic DIO code merges our get_blocks calls together into a bigger single bio. This fixes things by walking forward in the ordered extent code finding all the overlapping ordered extents and completing them all at once. Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Linus Torvalds authored
This avoids some include-file hell, and the function isn't really important enough to be inlined anyway. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 28 Nov, 2010 5 commits
-
-
Linus Torvalds authored
And in particular, use it in 'pipe_fcntl()'. The other pipe functions do not need to use the 'careful' version, since they are only ever called for things that are already known to be pipes. The normal read/write/ioctl functions are called through the file operations structures, so if a file isn't a pipe, they'd never get called. But pipe_fcntl() is special, and called directly from the generic fcntl code, and needs to use the same careful function that the splice code is using. Cc: Jens Axboe <jaxboe@fusionio.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dave Jones <davej@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
.. and change it to take the 'file' pointer instead of an inode, since that's what all users want anyway. The renaming is preparatory to exporting it to other users. The old 'pipe_info()' name was too generic and is already used elsewhere, so before making the function public we need to use a more specific name. Cc: Jens Axboe <jaxboe@fusionio.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dave Jones <davej@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf: Fix the software context switch counter perf, x86: Fixup Kconfig deps x86, perf, nmi: Disable perf if counters are not accessible perf: Fix inherit vs. context rotation bug
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6Linus Torvalds authored
* 'fwnet' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: net: throttle TX queue before running out of tlabels firewire: net: replace lists by counters firewire: net: fix memory leaks firewire: net: count stats.tx_packets and stats.tx_bytes
-
Filip Aben authored
The HSO driver incorrectly creates a serial device instead of a net device when disable_net is set. It shouldn't create anything for the network interface. Signed-off-by: Filip Aben <f.aben@option.com> Reported-by: Piotr Isajew <pki@ex.com.pl> Reported-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-