- 22 Jun, 2019 24 commits
-
-
Ido Schimmel authored
The driver tries to periodically refresh neighbours that are used to reach nexthops. This is done by periodically calling neigh_event_send(). However, if the neighbour becomes dead, there is nothing we can do to return it to a connected state and the above function call is basically a NOP. This results in the nexthop never being written to the device's adjacency table and therefore never used to forward packets. Fix this by dropping our reference from the dead neighbour and associating the nexthop with a new neigbhour which we will try to refresh. Fixes: a7ff87ac ("mlxsw: spectrum_router: Implement next-hop routing") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reported-by:
Alex Veber <alexve@mellanox.com> Tested-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Edward Srouji authored
Add missing entries for create/destroy UCTX and UMEM commands. This could get us wrong "unknown FW command" error in flows where we unbind the device or reset the driver. Also the translation of these commands from opcodes to string was missing. Fixes: 6e3722ba ("IB/mlx5: Use the correct commands for UMEM and UCTX allocation") Signed-off-by:
Edward Srouji <edwards@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Maxime Chevallier authored
[ Upstream commit f0d2ca15 ] Using ethtool, users can specify a classification action matching on the full vlan tag, which includes the DEI bit (also previously called CFI). However, when converting the ethool_flow_spec to a flow_rule, we use dissector keys to represent the matching patterns. Since the vlan dissector key doesn't include the DEI bit, this information was silently discarded when translating the ethtool flow spec in to a flow_rule. This commit adds the DEI bit into the vlan dissector key, and allows propagating the information to the driver when parsing the ethtool flow spec. Fixes: eca4205f ("ethtool: add ethtool_rx_flow_spec to flow_rule structure translator") Reported-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
-
Robert Hancock authored
[ Upstream commit 6bb9e376 ] If some of the switch ports were not listed in the device tree, due to being unused, the ksz_mib_read_work function ended up accessing a NULL dp->slave pointer and causing an oops. Skip checking statistics for any unused ports. Fixes: 7c6ff470 ("net: dsa: microchip: add MIB counter reading support") Signed-off-by:
Robert Hancock <hancock@sedsystems.ca> Reviewed-by:
Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Maxime Chevallier authored
[ Upstream commit 6b7a3430 ] When removing all VID filters, the mvpp2_prs_vid_entry_remove would be called with the TCAM id incorrectly used as a VID, causing the wrong TCAM entries to be invalidated. Fix this by directly invalidating entries in the VID range. Fixes: 56beda3d ("net: mvpp2: Add hardware offloading for VLAN filtering") Suggested-by:
Yuri Chipchev <yuric@marvell.com> Signed-off-by:
-
Maxime Chevallier authored
[ Upstream commit 46b0090a ] VID filtering is implemented in the Header Parser, with one range of 11 vids being assigned for each no-loopback port. Make sure we use the per-port range when looking for existing entries in the Parser. Since we used a global range instead of a per-port one, this causes VIDs to be removed from the whitelist from all ports of the same PPv2 instance. Fixes: 56beda3d ("net: mvpp2: Add hardware offloading for VLAN filtering") Suggested-by:
-
Stefano Brivio authored
[ Upstream commit eccc73a6 ] In commit a0796644 ("geneve: ICMP error lookup handler") I wrongly assumed buffers from icmp_socket_deliver() would be linear. This is not the case: icmp_socket_deliver() only guarantees we have 8 bytes of linear data. Eric fixed this same issue for fou and fou6 in commits 26fc181e ("fou, fou6: do not assume linear skbs") and 5355ed63 ("fou, fou6: avoid uninit-value in gue_err() and gue6_err()"). Use pskb_may_pull() instead of checking skb->len, and take into account the fact we later access the GENEVE header with udp_hdr(), so we also need to sum skb_transport_header() here. Reported-by:
Guillaume Nault <gnault@redhat.com> Fixes: a0796644 ("geneve: ICMP error lookup handler") Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
Stefano Brivio authored
[ Upstream commit 8399a693 ] In commit c3a43b9f ("vxlan: ICMP error lookup handler") I wrongly assumed buffers from icmp_socket_deliver() would be linear. This is not the case: icmp_socket_deliver() only guarantees we have 8 bytes of linear data. Eric fixed this same issue for fou and fou6 in commits 26fc181e ("fou, fou6: do not assume linear skbs") and 5355ed63 ("fou, fou6: avoid uninit-value in gue_err() and gue6_err()"). Use pskb_may_pull() instead of checking skb->len, and take into account the fact we later access the VXLAN header with udp_hdr(), so we also need to sum skb_transport_header() here. Reported-by:
-
Alaa Hleihel authored
Prior to reloading a device we must first verify that it was not already removed. Otherwise, the attempt to remove the device will do nothing, and in that case we will end up proceeding with adding an new device that no one was expecting to remove, leaving behind used resources such as EQs that causes a failure to destroy comp EQs and syndrome (0x30f433). Fix that by making sure that we try to remove and add a device (based on a protocol) only if the device is already added. Fixes: c5447c70 ("net/mlx5: E-Switch, Reload IB interface when switching devlink modes") Signed-off-by:
Alaa Hleihel <alaa@mellanox.com> Signed-off-by:
-
Stephen Barber authored
[ Upstream commit 42f5cda5 ] Set the SOCK_DONE flag to match the TCP_CLOSING state when a peer has shut down and there is nothing left to read. This fixes the following bug: 1) Peer sends SHUTDOWN(RDWR). 2) Socket enters TCP_CLOSING but SOCK_DONE is not set. 3) read() returns -ENOTCONN until close() is called, then returns 0. Signed-off-by:
Stephen Barber <smbarber@chromium.org> Signed-off-by:
-
Xin Long authored
[ Upstream commit 5cf02612 ] Syzbot reported a memleak caused by grp members' deferredq list not purged when the grp is be deleted. The issue occurs when more(msg_grp_bc_seqno(hdr), m->bc_rcv_nxt) in tipc_group_filter_msg() and the skb will stay in deferredq. So fix it by calling __skb_queue_purge for each member's deferredq in tipc_group_delete() when a tipc sk leaves the grp. Fixes: b87a5ea3 ("tipc: guarantee group unicast doesn't bypass group broadcast") Reported-by: syzbot+78fbe679c8ca8d264a8d@syzkaller.appspotmail.com Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
John Paul Adrian Glaubitz authored
[ Upstream commit 07a6d63e ] In d5a2aa24, the name in struct console sunhv_console was changed from "ttyS" to "ttyHV" while the name in struct uart_ops sunhv_pops remained unchanged. This results in the hypervisor console device to be listed as "ttyHV0" under /proc/consoles while the device node is still named "ttyS0": root@osaka:~# cat /proc/consoles ttyHV0 -W- (EC p ) 4:64 tty0 -WU (E ) 4:1 root@osaka:~# readlink /sys/dev/char/4:64 ../../devices/root/f02836f0/f0285690/tty/ttyS0 root@osaka:~# This means that any userland code which tries to determine the name of the device file of the hypervisor console device can not rely on the information provided by /proc/consoles. In particular, booting current versions of debian- installer inside a SPARC LDOM will fail with the installer unable to determine the console device. After renaming the device in struct uart_ops sunhv_pops to "ttyHV" as well, the inconsistency is fixed and it is possible again to determine the name of the device file of the hypervisor console device by reading the contents of /proc/console: root@osaka:~# cat /proc/consoles ttyHV0 -W- (EC p ) 4:64 tty0 -WU (E ) 4:1 root@osaka:~# readlink /sys/dev/char/4:64 ../../devices/root/f02836f0/f0285690/tty/ttyHV0 root@osaka:~# With this change, debian-installer works correctly when installing inside a SPARC LDOM. Signed-off-by:
John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by:
-
Neil Horman authored
[ Upstream commit ce950f10 ] Based on comments from Xin, even after fixes for our recent syzbot report of cookie memory leaks, its possible to get a resend of an INIT chunk which would lead to us leaking cookie memory. To ensure that we don't leak cookie memory, free any previously allocated cookie first. Change notes v1->v2 update subsystem tag in subject (davem) repeat kfree check for peer_random and peer_hmacs (xin) v2->v3 net->sctp also free peer_chunks v3->v4 fix subject tags v4->v5 remove cut line Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Reported-by: syzbot+f7e9153b037eac9b1df8@syzkaller.appspotmail.com CC: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> CC: Xin Long <lucien.xin@gmail.com> CC: "David S. Miller" <davem@davemloft.net> CC: netdev@vger.kernel.org Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Young Xiao authored
[ Upstream commit 385097a3 ] Check that the NFC_ATTR_TARGET_INDEX attributes (in addition to NFC_ATTR_DEVICE_INDEX) are provided by the netlink client prior to accessing them. This prevents potential unhandled NULL pointer dereference exceptions which can be triggered by malicious user-mode programs, if they omit one or both of these attributes. Signed-off-by:
Young Xiao <92siuyang@gmail.com> Signed-off-by:
-
John Fastabend authored
[ Upstream commit 648ee6ce ] tls_sw_do_sendpage needs to return the total number of bytes sent regardless of how many sk_msgs are allocated. Unfortunately, copied (the value we return up the stack) is zero'd before each new sk_msg is allocated so we only return the copied size of the last sk_msg used. The caller (splice, etc.) of sendpage will then believe only part of its data was sent and send the missing chunks again. However, because the data actually was sent the receiver will get multiple copies of the same data. To reproduce this do multiple sendfile calls with a length close to the max record size. This will in turn call splice/sendpage, sendpage may use multiple sk_msg in this case and then returns the incorrect number of bytes. This will cause splice to resend creating duplicate data on the receiver. Andre created a C program that can easily generate this case so we will push a similar selftest for this to bpf-next shortly. The fix is to _not_ zero the copied field so that the total sent bytes is returned. Reported-by:
Steinar H. Gunderson <steinar+kernel@gunderson.no> Reported-by:
Andre Tomt <andre@tomt.net> Tested-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
-
Taehee Yoo authored
[ Upstream commit 309b6697 ] In order to create an internal vport, internal_dev_create() is used and that calls register_netdevice() internally. If register_netdevice() fails, it calls dev->priv_destructor() to free private data of netdev. actually, a private data of this is a vport. Hence internal_dev_create() should not free and use a vport after failure of register_netdevice(). Test command ovs-dpctl add-dp bonding_masters Splat looks like: [ 1035.667767] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 1035.675958] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 1035.676916] CPU: 1 PID: 1028 Comm: ovs-vswitchd Tainted: G B 5.2.0-rc3+ #240 [ 1035.676916] RIP: 0010:internal_dev_create+0x2e5/0x4e0 [openvswitch] [ 1035.676916] Code: 48 c1 ea 03 80 3c 02 00 0f 85 9f 01 00 00 4c 8b 23 48 b8 00 00 00 00 00 fc ff df 49 8d bc 24 60 05 00 00 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 86 01 00 00 49 8b bc 24 60 05 00 00 e8 e4 68 f4 [ 1035.713720] RSP: 0018:ffff88810dcb7578 EFLAGS: 00010206 [ 1035.713720] RAX: dffffc0000000000 RBX: ffff88810d13fe08 RCX: ffffffff84297704 [ 1035.713720] RDX: 00000000000000ac RSI: 0000000000000000 RDI: 0000000000000560 [ 1035.713720] RBP: 00000000ffffffef R08: fffffbfff0d3b881 R09: fffffbfff0d3b881 [ 1035.713720] R10: 0000000000000001 R11: fffffbfff0d3b880 R12: 0000000000000000 [ 1035.768776] R13: 0000607ee460b900 R14: ffff88810dcb7690 R15: ffff88810dcb7698 [ 1035.777709] FS: 00007f02095fc980(0000) GS:ffff88811b400000(0000) knlGS:0000000000000000 [ 1035.777709] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1035.777709] CR2: 00007ffdf01d2f28 CR3: 0000000108258000 CR4: 00000000001006e0 [ 1035.777709] Call Trace: [ 1035.777709] ovs_vport_add+0x267/0x4f0 [openvswitch] [ 1035.777709] new_vport+0x15/0x1e0 [openvswitch] [ 1035.777709] ovs_vport_cmd_new+0x567/0xd10 [openvswitch] [ 1035.777709] ? ovs_dp_cmd_dump+0x490/0x490 [openvswitch] [ 1035.777709] ? __kmalloc+0x131/0x2e0 [ 1035.777709] ? genl_family_rcv_msg+0xa54/0x1030 [ 1035.777709] genl_family_rcv_msg+0x63a/0x1030 [ 1035.777709] ? genl_unregister_family+0x630/0x630 [ 1035.841681] ? debug_show_all_locks+0x2d0/0x2d0 [ ... ] Fixes: cf124db5 ("net: Fix inconsistent teardown and release of private netdev state.") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Reviewed-by:
Greg Rose <gvrose8192@gmail.com> Signed-off-by:
-
Linus Walleij authored
[ Upstream commit 760c80b7 ] We get this regression when using RTL8366RB as part of a bridge with OpenWrt: WARNING: CPU: 0 PID: 1347 at net/switchdev/switchdev.c:291 switchdev_port_attr_set_now+0x80/0xa4 lan0: Commit of attribute (id=7) failed. (...) realtek-smi switch lan0: failed to initialize vlan filtering on this port This is because it is trying to disable VLAN filtering on VLAN0, as we have forgot to add 1 to the port number to get the right VLAN in rtl8366_vlan_filtering(): when we initialize the VLAN we associate VLAN1 with port 0, VLAN2 with port 1 etc, so we need to add 1 to the port offset. Fixes: d8652956 ("net: dsa: realtek-smi: Add Realtek SMI driver") Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit f3e92cb8 ] Nine years ago, I added RCU handling to neighbours, not pneighbours. (pneigh are not commonly used) Unfortunately I missed that /proc dump operations would use a common entry and exit point : neigh_seq_start() and neigh_seq_stop() We need to read_lock(tbl->lock) or risk use-after-free while iterating the pneigh structures. We might later convert pneigh to RCU and revert this patch. sysbot reported : BUG: KASAN: use-after-free in pneigh_get_next.isra.0+0x24b/0x280 net/core/neighbour.c:3158 Read of size 8 at addr ffff888097f2a700 by task syz-executor.0/9825 CPU: 1 PID: 9825 Comm: syz-executor.0 Not tainted 5.2.0-rc4+ #32 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:188 __kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 kasan_report+0x12/0x20 mm/kasan/common.c:614 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:132 pneigh_get_next.isra.0+0x24b/0x280 net/core/neighbour.c:3158 neigh_seq_next+0xdb/0x210 net/core/neighbour.c:3240 seq_read+0x9cf/0x1110 fs/seq_file.c:258 proc_reg_read+0x1fc/0x2c0 fs/proc/inode.c:221 do_loop_readv_writev fs/read_write.c:714 [inline] do_loop_readv_writev fs/read_write.c:701 [inline] do_iter_read+0x4a4/0x660 fs/read_write.c:935 vfs_readv+0xf0/0x160 fs/read_write.c:997 kernel_readv fs/splice.c:359 [inline] default_file_splice_read+0x475/0x890 fs/splice.c:414 do_splice_to+0x127/0x180 fs/splice.c:877 splice_direct_to_actor+0x2d2/0x970 fs/splice.c:954 do_splice_direct+0x1da/0x2a0 fs/splice.c:1063 do_sendfile+0x597/0xd00 fs/read_write.c:1464 __do_sys_sendfile64 fs/read_write.c:1525 [inline] __se_sys_sendfile64 fs/read_write.c:1511 [inline] __x64_sys_sendfile64+0x1dd/0x220 fs/read_write.c:1511 do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4592c9 Code: fd b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f4aab51dc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028 RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00000000004592c9 RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000005 RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000080000000 R11: 0000000000000246 R12: 00007f4aab51e6d4 R13: 00000000004c689d R14: 00000000004db828 R15: 00000000ffffffff Allocated by task 9827: save_stack+0x23/0x90 mm/kasan/common.c:71 set_track mm/kasan/common.c:79 [inline] __kasan_kmalloc mm/kasan/common.c:489 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:462 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:503 __do_kmalloc mm/slab.c:3660 [inline] __kmalloc+0x15c/0x740 mm/slab.c:3669 kmalloc include/linux/slab.h:552 [inline] pneigh_lookup+0x19c/0x4a0 net/core/neighbour.c:731 arp_req_set_public net/ipv4/arp.c:1010 [inline] arp_req_set+0x613/0x720 net/ipv4/arp.c:1026 arp_ioctl+0x652/0x7f0 net/ipv4/arp.c:1226 inet_ioctl+0x2a0/0x340 net/ipv4/af_inet.c:926 sock_do_ioctl+0xd8/0x2f0 net/socket.c:1043 sock_ioctl+0x3ed/0x780 net/socket.c:1194 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0xd5f/0x1380 fs/ioctl.c:696 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 9824: save_stack+0x23/0x90 mm/kasan/common.c:71 set_track mm/kasan/common.c:79 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:451 kasan_slab_free+0xe/0x10 mm/kasan/common.c:459 __cache_free mm/slab.c:3432 [inline] kfree+0xcf/0x220 mm/slab.c:3755 pneigh_ifdown_and_unlock net/core/neighbour.c:812 [inline] __neigh_ifdown+0x236/0x2f0 net/core/neighbour.c:356 neigh_ifdown+0x20/0x30 net/core/neighbour.c:372 arp_ifdown+0x1d/0x21 net/ipv4/arp.c:1274 inetdev_destroy net/ipv4/devinet.c:319 [inline] inetdev_event+0xa14/0x11f0 net/ipv4/devinet.c:1544 notifier_call_chain+0xc2/0x230 kernel/notifier.c:95 __raw_notifier_call_chain kernel/notifier.c:396 [inline] raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:403 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1749 call_netdevice_notifiers_extack net/core/dev.c:1761 [inline] call_netdevice_notifiers net/core/dev.c:1775 [inline] rollback_registered_many+0x9b9/0xfc0 net/core/dev.c:8178 rollback_registered+0x109/0x1d0 net/core/dev.c:8220 unregister_netdevice_queue net/core/dev.c:9267 [inline] unregister_netdevice_queue+0x1ee/0x2c0 net/core/dev.c:9260 unregister_netdevice include/linux/netdevice.h:2631 [inline] __tun_detach+0xd8a/0x1040 drivers/net/tun.c:724 tun_detach drivers/net/tun.c:741 [inline] tun_chr_close+0xe0/0x180 drivers/net/tun.c:3451 __fput+0x2ff/0x890 fs/file_table.c:280 ____fput+0x16/0x20 fs/file_table.c:313 task_work_run+0x145/0x1c0 kernel/task_work.c:113 tracehook_notify_resume include/linux/tracehook.h:185 [inline] exit_to_usermode_loop+0x273/0x2c0 arch/x86/entry/common.c:168 prepare_exit_to_usermode arch/x86/entry/common.c:199 [inline] syscall_return_slowpath arch/x86/entry/common.c:279 [inline] do_syscall_64+0x58e/0x680 arch/x86/entry/common.c:304 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff888097f2a700 which belongs to the cache kmalloc-64 of size 64 The buggy address is located 0 bytes inside of 64-byte region [ffff888097f2a700, ffff888097f2a740) The buggy address belongs to the page: page:ffffea00025fca80 refcount:1 mapcount:0 mapping:ffff8880aa400340 index:0x0 flags: 0x1fffc0000000200(slab) raw: 01fffc0000000200 ffffea000250d548 ffffea00025726c8 ffff8880aa400340 raw: 0000000000000000 ffff888097f2a000 0000000100000020 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888097f2a600: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc ffff888097f2a680: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc >ffff888097f2a700: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ^ ffff888097f2a780: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff888097f2a800: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc Fixes: 767e97e1 ("neigh: RCU conversion of struct neighbour") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Jeremy Sowden authored
[ Upstream commit 6be8e297 ] lapb_register calls lapb_create_cb, which initializes the control- block's ref-count to one, and __lapb_insert_cb, which increments it when adding the new block to the list of blocks. lapb_unregister calls __lapb_remove_cb, which decrements the ref-count when removing control-block from the list of blocks, and calls lapb_put itself to decrement the ref-count before returning. However, lapb_unregister also calls __lapb_devtostruct to look up the right control-block for the given net_device, and __lapb_devtostruct also bumps the ref-count, which means that when lapb_unregister returns the ref-count is still 1 and the control-block is leaked. Call lapb_put after __lapb_devtostruct to fix leak. Reported-by: syzbot+afb980676c836b4a0afa@syzkaller.appspotmail.com Signed-off-by:
Jeremy Sowden <jeremy@azazel.net> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 65a3c497 ] Before taking a refcount, make sure the object is not already scheduled for deletion. Same fix is needed in ipv6_flowlabel_opt() Fixes: 18367681 ("ipv6 flowlabel: Convert np->ipv6_fl_list to RCU.") Signed-off-by:
-
Haiyang Zhang authored
[ Upstream commit 9a33629b ] For better consistency of synthetic NIC names, we set the probe mode to PROBE_FORCE_SYNCHRONOUS. So the names can be aligned with the vmbus channel offer sequence. Fixes: af0a5646 ("use the new async probing feature for the hyperv drivers") Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
Ivan Vecera authored
[ Upstream commit 718f4a25 ] Number of Rx queues used for flow hashing returned by the driver is incorrect and this bug prevents user to use the last Rx queue in indirection table. Let's say we have a NIC with 6 combined queues: [root@sm-03 ~]# ethtool -l enp4s0f0 Channel parameters for enp4s0f0: Pre-set maximums: RX: 5 TX: 5 Other: 0 Combined: 6 Current hardware settings: RX: 0 TX: 0 Other: 0 Combined: 6 Default indirection table maps all (6) queues equally but the driver reports only 5 rings available. [root@sm-03 ~]# ethtool -x enp4s0f0 RX flow hash indirection table for enp4s0f0 with 5 RX ring(s): 0: 0 1 2 3 4 5 0 1 8: 2 3 4 5 0 1 2 3 16: 4 5 0 1 2 3 4 5 24: 0 1 2 3 4 5 0 1 ... Now change indirection table somehow: [root@sm-03 ~]# ethtool -X enp4s0f0 weight 1 1 [root@sm-03 ~]# ethtool -x enp4s0f0 RX flow hash indirection table for enp4s0f0 with 6 RX ring(s): 0: 0 0 0 0 0 0 0 0 ... 64: 1 1 1 1 1 1 1 1 ... Now it is not possible to change mapping back to equal (default) state: [root@sm-03 ~]# ethtool -X enp4s0f0 equal 6 Cannot set RX flow hash configuration: Invalid argument Fixes: 594ad54a ("be2net: Add support for setting and getting rx flow hash options") Reported-by:
Tianhao <tizhao@redhat.com> Signed-off-by:
Ivan Vecera <ivecera@redhat.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit d4d5d8e8 ] Before thread in process context uses bh_lock_sock() we must disable bh. sysbot reported : WARNING: inconsistent lock state 5.2.0-rc3+ #32 Not tainted inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. blkid/26581 [HC0[0]:SC1[1]:HE1:SE0] takes: 00000000e0da85ee (slock-AF_AX25){+.?.}, at: spin_lock include/linux/spinlock.h:338 [inline] 00000000e0da85ee (slock-AF_AX25){+.?.}, at: ax25_destroy_timer+0x53/0xc0 net/ax25/af_ax25.c:275 {SOFTIRQ-ON-W} state was registered at: lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:4303 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:151 spin_lock include/linux/spinlock.h:338 [inline] ax25_rt_autobind+0x3ca/0x720 net/ax25/ax25_route.c:429 ax25_connect.cold+0x30/0xa4 net/ax25/af_ax25.c:1221 __sys_connect+0x264/0x330 net/socket.c:1834 __do_sys_connect net/socket.c:1845 [inline] __se_sys_connect net/socket.c:1842 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1842 do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301 entry_SYSCALL_64_after_hwframe+0x49/0xbe irq event stamp: 2272 hardirqs last enabled at (2272): [<ffffffff810065f3>] trace_hardirqs_on_thunk+0x1a/0x1c hardirqs last disabled at (2271): [<ffffffff8100660f>] trace_hardirqs_off_thunk+0x1a/0x1c softirqs last enabled at (1522): [<ffffffff87400654>] __do_softirq+0x654/0x94c kernel/softirq.c:320 softirqs last disabled at (2267): [<ffffffff81449010>] invoke_softirq kernel/softirq.c:374 [inline] softirqs last disabled at (2267): [<ffffffff81449010>] irq_exit+0x180/0x1d0 kernel/softirq.c:414 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(slock-AF_AX25); <Interrupt> lock(slock-AF_AX25); *** DEADLOCK *** 1 lock held by blkid/26581: #0: 0000000010fd154d ((&ax25->dtimer)){+.-.}, at: lockdep_copy_map include/linux/lockdep.h:175 [inline] #0: 0000000010fd154d ((&ax25->dtimer)){+.-.}, at: call_timer_fn+0xe0/0x720 kernel/time/timer.c:1312 stack backtrace: CPU: 1 PID: 26581 Comm: blkid Not tainted 5.2.0-rc3+ #32 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_usage_bug.cold+0x393/0x4a2 kernel/locking/lockdep.c:2935 valid_state kernel/locking/lockdep.c:2948 [inline] mark_lock_irq kernel/locking/lockdep.c:3138 [inline] mark_lock+0xd46/0x1370 kernel/locking/lockdep.c:3513 mark_irqflags kernel/locking/lockdep.c:3391 [inline] __lock_acquire+0x159f/0x5490 kernel/locking/lockdep.c:3745 lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:4303 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:151 spin_lock include/linux/spinlock.h:338 [inline] ax25_destroy_timer+0x53/0xc0 net/ax25/af_ax25.c:275 call_timer_fn+0x193/0x720 kernel/time/timer.c:1322 expire_timers kernel/time/timer.c:1366 [inline] __run_timers kernel/time/timer.c:1685 [inline] __run_timers kernel/time/timer.c:1653 [inline] run_timer_softirq+0x66f/0x1740 kernel/time/timer.c:1698 __do_softirq+0x25c/0x94c kernel/softirq.c:293 invoke_softirq kernel/softirq.c:374 [inline] irq_exit+0x180/0x1d0 kernel/softirq.c:414 exiting_irq arch/x86/include/asm/apic.h:536 [inline] smp_apic_timer_interrupt+0x13b/0x550 arch/x86/kernel/apic/apic.c:1068 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:806 </IRQ> RIP: 0033:0x7f858d5c3232 Code: 8b 61 08 48 8b 84 24 d8 00 00 00 4c 89 44 24 28 48 8b ac 24 d0 00 00 00 4c 8b b4 24 e8 00 00 00 48 89 7c 24 68 48 89 4c 24 78 <48> 89 44 24 58 8b 84 24 e0 00 00 00 89 84 24 84 00 00 00 8b 84 24 RSP: 002b:00007ffcaf0cf5c0 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13 RAX: 00007f858d7d27a8 RBX: 00007f858d7d8820 RCX: 00007f858d3940d8 RDX: 00007ffcaf0cf798 RSI: 00000000f5e616f3 RDI: 00007f858d394fee RBP: 0000000000000000 R08: 00007ffcaf0cf780 R09: 00007f858d7db480 R10: 0000000000000000 R11: 0000000009691a75 R12: 0000000000000005 R13: 00000000f5e616f3 R14: 0000000000000000 R15: 00007ffcaf0cf798 Signed-off-by:
-
Florian Westphal authored
commit 6bac76db upstream. Due to copy&paste error nf_nat_mangle_udp_packet passes IPPROTO_TCP, resulting in incorrect udp checksum when payload had to be mangled. Fixes: dac3fe72 ("netfilter: nat: remove csum_recalc hook") Reported-by:
Marc Haber <mh+netdev@zugschlus.de> Tested-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
- 19 Jun, 2019 16 commits
-
-
Greg Kroah-Hartman authored
-
Nicholas Piggin authored
commit 33258a1d upstream. Commit 1b2443a5 ("powerpc/book3s64: Avoid multiple endian conversion in pte helpers") changed the actual bitwise tests in pte_access_permitted by using pte_write() and pte_present() helpers rather than raw bitwise testing _PAGE_WRITE and _PAGE_PRESENT bits. The pte_present() change now returns true for PTEs which are !_PAGE_PRESENT and _PAGE_INVALID, which is the combination used by pmdp_invalidate() to synchronize access from lock-free lookups. pte_access_permitted() is used by pmd_access_permitted(), so allowing GUP lock free access to proceed with such PTEs breaks this synchronisation. This bug has been observed on a host using the hash page table MMU, with random crashes and corruption in guests, usually together with bad PMD messages in the host. Fix this by adding an explicit check in pmd_access_permitted(), and documenting the condition explicitly. The pte_write() change should be okay, and would prevent GUP from falling back to the slow path when encountering savedwrite PTEs, which matches what x86 (that does not implement savedwrite) does. Fixes: 1b2443a5 ("powerpc/book3s64: Avoid multiple endian conversion in pte helpers") Cc: stable@vger.kernel.org # v4.20+ Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Reviewed-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Christophe Leroy authored
commit 6c284228 upstream. In the old days, _PAGE_EXEC didn't exist on 6xx aka book3s/32. Therefore, allthough __mapin_ram_chunk() was already mapping kernel text with PAGE_KERNEL_TEXT and the rest with PAGE_KERNEL, the entire memory was executable. Part of the memory (first 512kbytes) was mapped with BATs instead of page table, but it was also entirely mapped as executable. In commit 385e89d5 ("powerpc/mm: add exec protection on powerpc 603"), we started adding exec protection to some 6xx, namely the 603, for pages mapped via pagetables. Then, in commit 63b2bc61 ("powerpc/mm/32s: Use BATs for STRICT_KERNEL_RWX"), the exec protection was extended to BAT mapped memory, so that really only the kernel text could be executed. The problem here is that kexec is based on copying some code into upper part of memory then executing it from there in order to install a fresh new kernel at its definitive location. However, the code is position independant and first part of it is just there to deactivate the MMU and jump to the second part. So it is possible to run this first part inplace instead of running the copy. Once the MMU is off, there is no protection anymore and the second part of the code will just run as before. Reported-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Fixes: 63b2bc61 ("powerpc/mm/32s: Use BATs for STRICT_KERNEL_RWX") Cc: stable@vger.kernel.org # v5.1+ Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Tested-by:
-
Jani Nikula authored
commit 48eaeb76 upstream. We've moved the override and firmware EDID (simply "override EDID" from now on) handling to the low level drm_do_get_edid() function in order to transparently use the override throughout the stack. The idea is that you get the override EDID via the ->get_modes() hook. Unfortunately, there are scenarios where the DDC probe in drm_get_edid() called via ->get_modes() fails, although the preceding ->detect() succeeds. In the case reported by Paul Wise, the ->detect() hook, intel_crt_detect(), relies on hotplug detect, bypassing the DDC. In the case reported by Ilpo Järvinen, there is no ->detect() hook, which is interpreted as connected. The subsequent DDC probe reached via ->get_modes() fails, and we don't even look at the override EDID, resulting in no modes being added. Because drm_get_edid() is used via ->detect() all over the place, we can't trivially remove the DDC probe, as it leads to override EDID effectively meaning connector forcing. The goal is that connector forcing and override EDID remain orthogonal. Generally, the underlying problem here is the conflation of ->detect() and ->get_modes() via drm_get_edid(). The former should just detect, and the latter should just get the modes, typically via reading the EDID. As long as drm_get_edid() is used in ->detect(), it needs to retain the DDC probe. Or such users need to have a separate DDC probe step first. The EDID caching between ->detect() and ->get_modes() done by some drivers is a further complication that prevents us from making drm_do_get_edid() adapt to the two cases. Work around the regression by falling back to a separate attempt at getting the override EDID at drm_helper_probe_single_connector_modes() level. With a working DDC and override EDID, it'll never be called; the override EDID will come via ->get_modes(). There will still be a failing DDC probe attempt in the cases that require the fallback. v2: - Call drm_connector_update_edid_property (Paul) - Update commit message about EDID caching (Daniel) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107583Reported-by:
Paul Wise <pabs3@bonedaddy.net> Cc: Paul Wise <pabs3@bonedaddy.net> References: http://mid.mail-archive.com/alpine.DEB.2.20.1905262211270.24390@whs-18.cs.helsinki.fiReported-by:
Ilpo Järvinen <ilpo.jarvinen@cs.helsinki.fi> Cc: Ilpo Järvinen <ilpo.jarvinen@cs.helsinki.fi> Suggested-by:
Daniel Vetter <daniel.vetter@ffwll.ch> References: 15f080f0 ("drm/edid: respect connector force for drm_get_edid ddc probe") Fixes: 53fd40a9 ("drm: handle override and firmware EDID at drm_do_get_edid() level") Cc: <stable@vger.kernel.org> # v4.15+ 56a2b7f2 drm/edid: abstract override/firmware EDID retrieval Cc: <stable@vger.kernel.org> # v4.15+ Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harish Chegondi <harish.chegondi@intel.com> Tested-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190610093054.28445-1-jani.nikula@intel.comSigned-off-by:
-
Jani Nikula authored
commit 56a2b7f2 upstream. Abstract the debugfs override and the firmware EDID retrieval function. We'll be needing it in the follow-up. No functional changes. Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Harish Chegondi <harish.chegondi@intel.com> Reviewed-by:
-
Prarit Bhargava authored
commit c7563e62 upstream. Booting with kernel parameter "rdt=cmt,mbmtotal,memlocal,l3cat,mba" and executing "mount -t resctrl resctrl -o mba_MBps /sys/fs/resctrl" results in a NULL pointer dereference on systems which do not have local MBM support enabled.. BUG: kernel NULL pointer dereference, address: 0000000000000020 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 722 Comm: kworker/0:3 Not tainted 5.2.0-0.rc3.git0.1.el7_UNSUPPORTED.x86_64 #2 Workqueue: events mbm_handle_overflow RIP: 0010:mbm_handle_overflow+0x150/0x2b0 Only enter the bandwith update loop if the system has local MBM enabled. Fixes: de73f38f ("x86/intel_rdt/mba_sc: Feedback loop to dynamically update mem bandwidth") Signed-off-by:
Prarit Bhargava <prarit@redhat.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190610171544.13474-1-prarit@redhat.comSigned-off-by:
-
Baoquan He authored
commit 00e5a2bb upstream. The size of the vmemmap section is hardcoded to 1 TB to support the maximum amount of system RAM in 4-level paging mode - 64 TB. However, 1 TB is not enough for vmemmap in 5-level paging mode. Assuming the size of struct page is 64 Bytes, to support 4 PB system RAM in 5-level, 64 TB of vmemmap area is needed: 4 * 1000^5 PB / 4096 bytes page size * 64 bytes per page struct / 1000^4 TB = 62.5 TB. This hardcoding may cause vmemmap to corrupt the following cpu_entry_area section, if KASLR puts vmemmap very close to it and the actual vmemmap size is bigger than 1 TB. So calculate the actual size of the vmemmap region needed and then align it up to 1 TB boundary. In 4-level paging mode it is always 1 TB. In 5-level it's adjusted on demand. The current code reserves 0.5 PB for vmemmap on 5-level. With this change, the space can be saved and thus used to increase entropy for the randomization. [ bp: Spell out how the 64 TB needed for vmemmap is computed and massage commit message. ] Fixes: eedb92ab ("x86/mm: Make virtual memory layout dynamic for CONFIG_X86_5LEVEL=y") Signed-off-by:
Baoquan He <bhe@redhat.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
Kees Cook <keescook@chromium.org> Acked-by:
Kirill A. Shutemov <kirill@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: kirill.shutemov@linux.intel.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable <stable@vger.kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190523025744.3756-1-bhe@redhat.comSigned-off-by:
-
Andrey Ryabinin authored
commit f3176ec9 upstream. Since commit d52888aa ("x86/mm: Move LDT remap out of KASLR region on 5-level paging") kernel doesn't boot with KASAN on 5-level paging machines. The bug is actually in early_p4d_offset() and introduced by commit 12a8cc7f ("x86/kasan: Use the same shadow offset for 4- and 5-level paging") early_p4d_offset() tries to convert pgd_val(*pgd) value to a physical address. This doesn't make sense because pgd_val() already contains the physical address. It did work prior to commit d52888aa because the result of "__pa_nodebug(pgd_val(*pgd)) & PTE_PFN_MASK" was the same as "pgd_val(*pgd) & PTE_PFN_MASK". __pa_nodebug() just set some high bits which were masked out by applying PTE_PFN_MASK. After the change of the PAGE_OFFSET offset in commit d52888aa __pa_nodebug(pgd_val(*pgd)) started to return a value with more high bits set and PTE_PFN_MASK wasn't enough to mask out all of them. So it returns a wrong not even canonical address and crashes on the attempt to dereference it. Switch back to pgd_val() & PTE_PFN_MASK to cure the issue. Fixes: 12a8cc7f ("x86/kasan: Use the same shadow offset for 4- and 5-level paging") Reported-by:
Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by:
-
Borislav Petkov authored
commit 78f4e932 upstream. Adric Blake reported the following warning during suspend-resume: Enabling non-boot CPUs ... x86: Booting SMP configuration: smpboot: Booting Node 0 Processor 1 APIC 0x2 unchecked MSR access error: WRMSR to 0x10f (tried to write 0x0000000000000000) \ at rIP: 0xffffffff8d267924 (native_write_msr+0x4/0x20) Call Trace: intel_set_tfa intel_pmu_cpu_starting ? x86_pmu_dead_cpu x86_pmu_starting_cpu cpuhp_invoke_callback ? _raw_spin_lock_irqsave notify_cpu_starting start_secondary secondary_startup_64 microcode: sig=0x806ea, pf=0x80, revision=0x96 microcode: updated to revision 0xb4, date = 2019-04-01 CPU1 is up The MSR in question is MSR_TFA_RTM_FORCE_ABORT and that MSR is emulated by microcode. The log above shows that the microcode loader callback happens after the PMU restoration, leading to the conjecture that because the microcode hasn't been updated yet, that MSR is not present yet, leading to the #GP. Add a microcode loader-specific hotplug vector which comes before the PERF vectors and thus executes earlier and makes sure the MSR is present. Fixes: 400816f6 ("perf/x86/intel: Implement support for TSX Force Abort") Reported-by:
Adric Blake <promarbler14@gmail.com> Signed-off-by:
-
Borislav Petkov authored
commit f3c74b38 upstream. Switch to using Donald Knuth's binary search algorithm (The Art of Computer Programming, vol. 3, section 6.2.1). This should've been done from the very beginning but the author must've been smoking something very potent at the time. The problem with the current one was that it would return the wrong element index in certain situations: https://lkml.kernel.org/r/CAM_iQpVd02zkVJ846cj-Fg1yUNuz6tY5q1Vpj4LrXmE06dPYYg@mail.gmail.com and the noodling code after the loop was fishy at best. So switch to using Knuth's binary search. The final result is much cleaner and straightforward. Fixes: 011d8261 ("RAS: Add a Corrected Errors Collector") Reported-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Cong Wang authored
commit 0ade0b62 upstream. cec_timer_fn() is a timer callback which reads ce_arr.array[] and updates its decay values. However, it runs in interrupt context and the mutex protection the CEC uses for that array, is inadequate. Convert the used timer to a workqueue to keep the tasks the CEC performs preemptible and thus low-prio. [ bp: Rewrite commit message. s/timer/decay/gi to make it agnostic as to what facility is used. ] Fixes: 011d8261 ("RAS: Add a Corrected Errors Collector") Signed-off-by:
-
Thomas Gleixner authored
commit e3ff9c36 upstream. Jason reported that the coarse ktime based time getters advance only once per second and not once per tick as advertised. The code reads only the monotonic base time, which advances once per second. The nanoseconds are accumulated on every tick in xtime_nsec up to a second and the regular time getters take this nanoseconds offset into account, but the ktime_get_coarse*() implementation fails to do so. Add the accumulated xtime_nsec value to the monotonic base time to get the proper per tick advancing coarse tinme. Fixes: b9ff604c ("timekeeping: Add ktime_get_coarse_with_offset") Reported-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
-
Eiichi Tsukata authored
commit f01098c7 upstream. Just like the case of commit 8b05a3a7 ("tracing/kprobes: Fix NULL pointer dereference in trace_kprobe_create()"), writing an incorrectly formatted string to uprobe_events can trigger NULL pointer dereference. Reporeducer: # echo r > /sys/kernel/debug/tracing/uprobe_events dmesg: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 8000000079d12067 P4D 8000000079d12067 PUD 7b7ab067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 1903 Comm: bash Not tainted 5.2.0-rc3+ #15 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014 RIP: 0010:strchr+0x0/0x30 Code: c0 eb 0d 84 c9 74 18 48 83 c0 01 48 39 d0 74 0f 0f b6 0c 07 3a 0c 06 74 ea 19 c0 83 c8 01 c3 31 c0 c3 0f 1f 84 00 00 00 00 00 <0f> b6 07 89 f2 40 38 f0 75 0e eb 13 0f b6 47 01 48 83 c RSP: 0018:ffffb55fc0403d10 EFLAGS: 00010293 RAX: ffff993ffb793400 RBX: 0000000000000000 RCX: ffffffffa4852625 RDX: 0000000000000000 RSI: 000000000000002f RDI: 0000000000000000 RBP: ffffb55fc0403dd0 R08: ffff993ffb793400 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff993ff9cc1668 R14: 0000000000000001 R15: 0000000000000000 FS: 00007f30c5147700(0000) GS:ffff993ffda00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000007b628000 CR4: 00000000000006f0 Call Trace: trace_uprobe_create+0xe6/0xb10 ? __kmalloc_track_caller+0xe6/0x1c0 ? __kmalloc+0xf0/0x1d0 ? trace_uprobe_create+0xb10/0xb10 create_or_delete_trace_uprobe+0x35/0x90 ? trace_uprobe_create+0xb10/0xb10 trace_run_command+0x9c/0xb0 trace_parse_run_command+0xf9/0x1eb ? probes_open+0x80/0x80 __vfs_write+0x43/0x90 vfs_write+0x14a/0x2a0 ksys_write+0xa2/0x170 do_syscall_64+0x7f/0x200 entry_SYSCALL_64_after_hwframe+0x49/0xbe Link: http://lkml.kernel.org/r/20190614074026.8045-1-devel@etsukata.com Cc: stable@vger.kernel.org Fixes: 0597c49c ("tracing/uprobes: Use dyn_event framework for uprobe events") Reviewed-by:
Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by:
Eiichi Tsukata <devel@etsukata.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Daniele Palmas authored
commit f3dfd407 upstream. Added support for Telit LE910Cx 0x1260 and 0x1261 compositions. Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Jörgen Storvist authored
commit 5417a7e4 upstream. Added IDs for Simcom SIM7500/SIM7600 series cellular module in RNDIS mode. Reserved the interface for ADB. T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1e0e ProdID=9011 Rev=03.18 S: Manufacturer=SimTech, Incorporated S: Product=SimTech, Incorporated S: SerialNumber=0123456789ABCDEF C: #Ifs= 8 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=ff Driver=rndis_host I: If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) Signed-off-by:
Jörgen Storvist <jorgen.storvist@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Chris Packham authored
commit c5f81656 upstream. This is adds the vendor and device id for the AT-VT-Kit3 which is a pl2303-based device. Signed-off-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
