During setup, ipa_endpoint_program() programs each endpoint with
various configuration parameters.  One of those registers defines
whether to drop packets when a head-of-line blocking condition is
detected on an RX endpoint.  We currently assume this is disabled;
instead, explicitly set it to be disabled.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The head-of-line block (HOLB) drop timer is only meaningful when
dropping packets due to blocking is enabled.  Given that, redefine
the interface so the timer is specified when enabling HOLB drop, and
use a different function when disabling.

To enable and disable HOLB drop, these functions will now be used:
  ipa_endpoint_init_hol_block_enable(endpoint, milliseconds)
  ipa_endpoint_init_hol_block_disable(endpoint)

The existing ipa_endpoint_init_hol_block_enable() becomes a helper
function, renamed ipa_endpoint_init_hol_block_en(), and used with
ipa_endpoint_init_hol_block_timer() to enable HOLB block on an
endpoint.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Not all filter table entries are used.  Only certain endpoints
support filtering, and the table begins with a bitmap indicating
which endpoints use the "slots" that follow for filter rules.

Currently, unused filter table entries are not initialized.
Instead, zero-fill the entire unused portion of the filter table
memory regions, to make it more obvious that memory is unused (and
not subsequently modified).

This is not strictly necessary, but the result is reassuring when
looking at filter table memory.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

A recent commit made disabling the SMP2P "setup ready" interrupt
unrelated to ipa_modem_stop().  Given that, it seems fitting to get
rid of ipa_modem_init() and ipa_modem_exit() (which are trivial
wrapper functions), and call ipa_smp2p_init() and ipa_smp2p_exit()
directly instead.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The VSC9959 switch embedded within NXP LS1028A (and that version of
Ocelot switches only) supports cut-through forwarding - meaning it can
start the process of looking up the destination ports for a packet, and
forward towards those ports, before the entire packet has been received
(as opposed to the store-and-forward mode).

The up side is having lower forwarding latency for large packets. The
down side is that frames with FCS errors are forwarded instead of being
dropped. However, erroneous frames do not result in incorrect updates of
the FDB or incorrect policer updates, since these processes are deferred
inside the switch to the end of frame. Since the switch starts the
cut-through forwarding process after all packet headers (including IP,
if any) have been processed, packets with large headers and small
payload do not see the benefit of lower forwarding latency.

There are two cases that need special attention.

The first is when a packet is multicast (or flooded) to multiple
destinations, one of which doesn't have cut-through forwarding enabled.
The switch deals with this automatically by disabling cut-through
forwarding for the frame towards all destination ports.

The second is when a packet is forwarded from a port of lower link speed
towards a port of higher link speed. This is not handled by the hardware
and needs software intervention.

Since we practically need to update the cut-through forwarding domain
from paths that aren't serialized by the rtnl_mutex (phylink
mac_link_down/mac_link_up ops), this means we need to serialize physical
link events with user space updates of bonding/bridging domains.

Enabling cut-through forwarding is done per {egress port, traffic class}.
I don't see any reason why this would be a configurable option as long
as it works without issues, and there doesn't appear to be any user
space configuration tool to toggle this on/off, so this patch enables
cut-through forwarding on all eligible ports and traffic classes.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20211125125808.2383984-2-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The only called takes ocelot_port->bridge and passes it as the "bridge"
argument to this function, which then compares it with
ocelot_port->bridge. This is not useful.

Instead, we would like this function to return 0 if ocelot_port->bridge
is not present, which is what this patch does.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20211125125808.2383984-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

There is a spelling mistake in a netdev_err error message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20211125002932.49217-1-colin.i.king@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When XDP program is loaded, it is desirable that the previous TX and RX
coalesce values are not re-inited to its default value. This prevents
unnecessary re-configurig the coalesce values that were working fine
before.

Fixes: ac746c85 ("net: stmmac: enhance XDP ZC driver level switching performance")
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Tested-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://lore.kernel.org/r/20211124114019.3949125-1-boon.leong.ong@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The node pointer is returned by of_get_child_by_name() with
refcount incremented in tsnep_mdio_init(). Calling of_node_put()
to aovid the refcount leak in tsnep_mdio_init().
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20211124084048.175456-1-yangyingliang@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

use ethtools api ethtool_sprintf to instead of snprintf.
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Link: https://lore.kernel.org/r/20211125025444.13115-1-xiangxia.m.yue@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Populate the supported interfaces bitmap and MAC capabilities mask for
the macb driver and remove the old validate implementation.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1mpuRv-00D4rb-Lz@rmk-PC.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

It seems only XID 609 made it to the mass market. Therefore let's
disable detection of the other RTL8125a XID's. If nobody complains
we can remove support for RTL_GIGA_MAC_VER_60 later.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/2cd3df01-5f8b-08dd-6def-3f31a3014bde@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This is to match ipv4 behaviour, see __ip_sock_set_tos()
implementation.

Technically for ipv6 this might not be required because normally we
do not allow tclass to influence routing, yet the cli tooling does
support it:

lpk11:~# ip -6 rule add pref 5 tos 45 lookup 5
lpk11:~# ip -6 rule
5:      from all tos 0x45 lookup 5

and in general dscp/tclass based routing does make sense.

We already have cases where dscp can affect vlan priority and/or
transmit queue (especially on wifi).

So let's just make things match.  Easier to reason about and no harm.

Cc: Eric Dumazet <edumazet@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20211123223208.1117871-1-zenczykowski@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This is to match ipv4 behaviour, see __ip_sock_set_tos()
implementation at ipv4/ip_sockglue.c:579

void __ip_sock_set_tos(struct sock *sk, int val)
{
  if (sk->sk_type == SOCK_STREAM) {
    val &= ~INET_ECN_MASK;
    val |= inet_sk(sk)->tos & INET_ECN_MASK;
  }
  if (inet_sk(sk)->tos != val) {
    inet_sk(sk)->tos = val;
    sk->sk_priority = rt_tos2priority(val);
    sk_dst_reset(sk);
  }
}

Cc: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20211123223154.1117794-1-zenczykowski@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

A CAP_NET_RAW capable process can already spoof (on transmit) anything
it desires via raw packet sockets...  There is no good reason to not
allow it to also be able to play routing tricks on packets from its
own normal sockets.

There is a desire to be able to use SO_MARK for routing table selection
(via ip rule fwmark) from within a user process without having to run
it as root.  Granting it CAP_NET_RAW is much less dangerous than
CAP_NET_ADMIN (CAP_NET_RAW doesn't permit persistent state change,
while CAP_NET_ADMIN does - by for example allowing the reconfiguration
of the routing tables and/or bringing up/down devices).

Let's keep CAP_NET_ADMIN for persistent state changes,
while using CAP_NET_RAW for non-configuration related stuff.
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20211123203715.193413-1-zenczykowski@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

CAP_NET_ADMIN is and should continue to be about configuring the
system as a whole, not about configuring per-socket or per-packet
parameters.
Sending and receiving raw packets is what CAP_NET_RAW is all about.

It can already send packets with any VLAN tag, and any IPv4 TOS
mark, and any IPv6 TCLASS mark, simply by virtue of building
such a raw packet.  Not to mention using any protocol and source/
/destination ip address/port tuple.

These are the fields that networking gear uses to prioritize packets.

Hence, a CAP_NET_RAW process is already capable of affecting traffic
prioritization after it hits the wire.  This change makes it capable
of affecting traffic prioritization even in the host at the nic and
before that in the queueing disciplines (provided skb->priority is
actually being used for prioritization, and not the TOS/TCLASS field)

Hence it makes sense to allow a CAP_NET_RAW process to set the
priority of sockets and thus packets it sends.
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20211123203702.193221-1-zenczykowski@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Fix warning reported by bot.
Make sure hash is init to 0 and fix wrong logic for hash_type in
qca8k_lag_can_offload.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: def97530 ("net: dsa: qca8k: add LAG support")
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211123154446.31019-1-ansuelsmth@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Even if firmware fails to recognize the plugged-in port module type,
allow reading port module EEPROM anyway. This helps in obtaining
necessary diagnostics information for debugging and analysis.
Signed-off-by: Manoj Malviya <manojmalviya@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Link: https://lore.kernel.org/r/1637682437-31407-1-git-send-email-rahul.lakkireddy@chelsio.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Cited commit converted simple_strtoul() to kstrtoul() as suggested by
the former's documentation. However, it also forced all the inputs to be
decimal resulting in user space breakage.

Fix by setting the base to '0' so that the base is automatically
detected.

Before:

 # ip link add name br0 type bridge vlan_filtering 1
 # echo "0x88a8" > /sys/class/net/br0/bridge/vlan_protocol
 bash: echo: write error: Invalid argument

After:

 # ip link add name br0 type bridge vlan_filtering 1
 # echo "0x88a8" > /sys/class/net/br0/bridge/vlan_protocol
 # echo $?
 0

Fixes: 520fbdf7 ("net/bridge: replace simple_strtoul to kstrtol")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/20211124101122.3321496-1-idosch@idosch.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Eric Dumazet says:

====================
gro: remove redundant rcu_read_lock

Recent trees got an increase of rcu_read_{lock|unlock} costs,
it is time to get rid of the not needed pairs.
====================

Link: https://lore.kernel.org/r/20211123225608.2155163-1-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

All gro_complete() handlers are called from napi_gro_complete()
while rcu_read_lock() has been called.

There is no point stacking more rcu_read_lock()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

All gro_receive() handlers are called from dev_gro_receive()
while rcu_read_lock() has been called.

There is no point stacking more rcu_read_lock()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The following warning is fixed, by removing the unused resource size:

drivers/net/ethernet/engleder/tsnep_main.c:1155:21-24:
WARNING: Suspicious code. resource_size is maybe missing with io
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Link: https://lore.kernel.org/r/20211124205225.13985-1-gerhard@engleder-embedded.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Remove .owner field if calls are used which set it automatically

Eliminate the following coccicheck warning:
./drivers/net/ethernet/engleder/tsnep_main.c:1263:3-8: No need to set
.owner here. The core will do it.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Link: https://lore.kernel.org/r/1637721384-70836-2-git-send-email-yang.lee@linux.alibaba.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Guangbin Huang says:

====================
net: hns3: updates for -next

This series includes some updates for the HNS3 ethernet driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When tx timeout occurs, the info of dql maybe helpful, so print
these info to hns3_get_tx_timeo_queue_info().
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, there is no way to get drop packet number of multicast and
broadcast in IGU hardware module, it is not convenient to find problem
when multicast packet or broadcast packet is dropped in IGU, so this
patch adds statistics for them in debugfs.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Printing the whole MAC addresse may bring security risks. Therefore,
the MAC address is partially encrypted to improve security.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the mbx or reset message arrives, the driver is informed
through an interrupt. This task can be processed only after
the workqueue is scheduled. In some cases, this workqueue
scheduling takes a long time. As a result, the mbx or reset
service task cannot be processed in time. So add some warning
message to improve debugging efficiency for this case.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Eliminate the follow smatch warning:

drivers/net/usb/lan78xx.c:4961 lan78xx_resume() warn: inconsistent
indenting.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Kuniyuki Iwashima says:

====================
dccp/tcp: Minor fixes for inet_csk_listen_start().

The first patch removes an unused argument, and the second removes a stale
comment.
====================

Link: https://lore.kernel.org/r/20211122101622.50572-1-kuniyu@amazon.co.jpSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This patch inlines dccp_listen_start() and removes a stale comment in
inet_dccp_listen() so that it looks like inet_listen().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Reviewed-by: Richard Sailer <richard_siegfried@systemli.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The commit 1295e2cf ("inet: minor optimization for backlog setting in
listen(2)") added change so that sk_max_ack_backlog is initialised earlier
in inet_dccp_listen() and inet_listen().  Since then, we no longer use
backlog in inet_csk_listen_start(), so let's remove it.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Richard Sailer <richard_siegfried@systemli.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The clock domain crossing error (CDC) is calculated at every fetch of Tx or Rx
timestamps. It includes a division. Especially on arm32 based systems it is
expensive. It also requires two conditionals in the hotpath.

Add a compensation value cache to struct plat_stmmacenet_data and subtract it
unconditionally in the RX/TX functions which spares the conditionals.

The value is initialized to 0 and if supported calculated in the PTP
initialization code.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://lore.kernel.org/r/20211122111931.135135-1-kurt@linutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

.ndo_change_proto_down was added seemingly to enable out-of-tree
implementations. Over 2.5yrs later we still have no real users
upstream. Hardwire the generic implementation for now, we can
revert once real users materialize. (rocker is a test vehicle,
not a user.)

We need to drop the optimization on the sysfs side, because
unlike ndos priv_flags will be changed at runtime, so we'd
need READ_ONCE/WRITE_ONCE everywhere..
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tony Nguyen says:

====================
100GbE Intel Wired LAN Driver Updates 2021-11-22

Shiraz Saleem says:

Currently E800 devices come up as RoCEv2 devices by default.

This series add supports for users to configure iWARP or RoCEv2 functionality
per PCI function. devlink parameters is used to realize this and is keyed
off similar work in [1].

[1] https://lore.kernel.org/linux-rdma/20210810132424.9129-1-parav@nvidia.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Marek Behún says:

====================
Add 5gbase-r support for mvpp2

this adds support for 5gbase-r for mvpp2 driver. Current versions of
TF-A firmware support changing the PHY to 5gbase-r via SMC calls, at
least on Macchiatobin.

Tested on Macchiatobin.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for PHY_INTERFACE_MODE_5GBASER.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for PHY_INTERFACE_MODE_5GBASER mode within the Marvell CP110
common PHY driver.

This is currently only supported via SMC calls to TF-A. Legacy support
may be added later, if needed.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 4dfb9982 ("tsn:  Fix build.") fixed compilation with const
dev_addr. In tsnep_netdev_set_mac_address() the call of ether_addr_copy()
was replaced with dev_set_mac_address(), which calls
ndo_set_mac_address(). This results in an endless recursive loop because
ndo_set_mac_address is set to tsnep_netdev_set_mac_address.

Call eth_hw_addr_set() instead of dev_set_mac_address() in
ndo_set_mac_address()/tsnep_netdev_set_mac_address() to copy the address
as intended.

[   26.563303] Insufficient stack space to handle exception!
[   26.563312] ESR: 0x96000047 -- DABT (current EL)
[   26.563317] FAR: 0xffff80000a507fc0
[   26.563320] Task stack:     [0xffff80000a508000..0xffff80000a50c000]
[   26.563324] IRQ stack:      [0xffff80000a0c0000..0xffff80000a0c4000]
[   26.563327] Overflow stack: [0xffff00007fbaf2b0..0xffff00007fbb02b0]
[   26.563333] CPU: 3 PID: 381 Comm: ifconfig Not tainted 5.16.0-rc1-zynqmp #60
[   26.563340] Hardware name: TSN endpoint (DT)
[   26.563343] pstate: a0000005 (NzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   26.563351] pc : inetdev_event+0x4/0x560
[   26.563364] lr : raw_notifier_call_chain+0x54/0x78
[   26.563372] sp : ffff80000a508040
[   26.563374] x29: ffff80000a508040 x28: ffff00000132b800 x27: 0000000000000000
[   26.563386] x26: 0000000000000000 x25: ffff800000ea5058 x24: 0904030201020001
[   26.563396] x23: ffff800000ea5058 x22: ffff80000a5080e0 x21: 0000000000000009
[   26.563405] x20: 00000000fffffffa x19: ffff80000a009510 x18: 0000000000000000
[   26.563414] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffd1341030
[   26.563422] x14: ffffffffffffffff x13: 0000000000000020 x12: 0101010101010101
[   26.563432] x11: 0000000000000020 x10: 0101010101010101 x9 : 7f7f7f7f7f7f7f7f
[   26.563441] x8 : 7f7f7f7f7f7f7f7f x7 : fefefeff30677364 x6 : 0000000080808080
[   26.563450] x5 : 0000000000000000 x4 : ffff800008dee170 x3 : ffff80000a50bd42
[   26.563459] x2 : ffff80000a5080e0 x1 : 0000000000000009 x0 : ffff80000a0092d0
[   26.563470] Kernel panic - not syncing: kernel stack overflow
[   26.563474] CPU: 3 PID: 381 Comm: ifconfig Not tainted 5.16.0-rc1-zynqmp #60
[   26.563481] Hardware name: TSN endpoint (DT)
[   26.563484] Call trace:
[   26.563486]  dump_backtrace+0x0/0x1b0
[   26.563497]  show_stack+0x18/0x68
[   26.563504]  dump_stack_lvl+0x68/0x84
[   26.563513]  dump_stack+0x18/0x34
[   26.563519]  panic+0x164/0x324
[   26.563524]  nmi_panic+0x64/0x98
[   26.563533]  panic_bad_stack+0x108/0x128
[   2k6.563539]  handle_bad_stack+0x38/0x68
[   26.563548]  __bad_stack+0x88/0x8c
[   26.563553]  inetdev_event+0x4/0x560
[   26.563560]  call_netdevice_notifiers_info+0x58/0xa8
[   26.563569]  dev_set_mac_address+0x78/0x110
[   26.563576]  tsnep_netdev_set_mac_address+0x38/0x60 [tsnep]
[   26.563591]  dev_set_mac_address+0xc4/0x110
[   26.563599]  tsnep_netdev_set_mac_address+0x38/0x60 [tsnep]
...
[   26.565444]  dev_set_mac_address+0xc4/0x110
[   26.565452]  tsnep_netdev_set_mac_address+0x38/0x60 [tsnep]
[   26.565462]  dev_set_mac_address+0xc4/0x110
[   26.565469]  dev_set_mac_address_user+0x44/0x68
[   26.565477]  dev_ifsioc+0x30c/0x568
[   26.565483]  dev_ioctl+0x124/0x3f0
[   26.565489]  sock_do_ioctl+0xb4/0xf8
[   26.565497]  sock_ioctl+0x2f4/0x398
[   26.565503]  __arm64_sys_ioctl+0xa8/0xe8
[   26.565511]  invoke_syscall+0x44/0x108
[   26.565520]  el0_svc_common.constprop.3+0x94/0xf8
[   26.565527]  do_el0_svc+0x24/0x88
[   26.565534]  el0_svc+0x20/0x50
[   26.565541]  el0t_64_sync_handler+0x90/0xb8
[   26.565548]  el0t_64_sync+0x180/0x184
[   26.565556] SMP: stopping secondary CPUs
[   26.565622] Kernel Offset: disabled
[   26.565624] CPU features: 0x0,00004002,00000846
[   26.565628] Memory Limit: none
[   27.843428] ---[ end Kernel panic - not syncing: kernel stack overflow ]---

Fixes: 4dfb9982 ("tsn:  Fix build.")
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>