- 04 Jun, 2014 40 commits
-
-
Xue jiufei authored
We found a race situation when dlm recovery and node joining occurs simultaneously if the network state is bad. N1 N4 start joining dlm and send query join to all live nodes set joining node to N1, return OK send query join to other live nodes and it may take a while call dlm_send_join_assert() to send assert join message when N2 is down, so keep trying to send message to N2 until find N2 is down send assert join message to N3, but connection is down with N3, so it may take a while become the recovery master for N2 and send begin reco message to other nodes in domain map but no N1 connection with N3 is rebuild, then send assert join to N4 call dlm_assert_joined_handler(), add N1 to domain_map dlm recovery done, send finalize message to nodes in domain map, including N1 receiving finalize message, trigger the BUG() because recovery master mismatch. Signed-off-by:joyce.xue <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Xue jiufei authored
Revert commit 75f82eaa ("ocfs2: fix NULL pointer dereference when dismount and ocfs2rec simultaneously") because it may cause a umount hang while shutting down the truncate log. fix NULL pointer dereference when dismount and ocfs2rec simultaneously The situation is as followes: ocfs2_dismout_volume -> ocfs2_recovery_exit -> free osb->recovery_map -> ocfs2_truncate_shutdown -> lock global bitmap inode -> ocfs2_wait_for_recovery -> check whether osb->recovery_map->rm_used is zero Because osb->recovery_map is already freed, rm_used can be any other values, so it may yield umount hang. To prevent NULL pointer dereference while getting sys_root_inode, we use a osb_tl_disable flag to disable schedule osb_truncate_log_wq after truncate log shutdown. Signed-off-by:
-
Fabian Frederick authored
ocfs_info_foo() and ocfs2_get_request_ptr functions are only used in ioctl.c Signed-off-by:
Fabian Frederick <fabf@skynet.be> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Xue jiufei authored
We found there is a conversion deadlock when the owner of lockres happened to crash before send DLM_PROXY_AST_MSG for a downconverting lock. The situation is as follows: Node1 Node2 Node3 the owner of lockresA lock_1 granted at EX mode and call ocfs2_cluster_unlock to decrease ex_holders. converting lock_3 from NL to EX send DLM_PROXY_AST_MSG to Node1, asking Node 1 to downconvert. receiving DLM_PROXY_AST_MSG, thread ocfs2dc send DLM_CONVERT_LOCK_MSG to Node2 to downconvert lock_1(EX->NL). lock_1 can be granted and put it into pending_asts list, return DLM_NORMAL. then something happened and Node2 crashed. received DLM_NORMAL, waiting for DLM_PROXY_AST_MSG. selected as the recovery master, receving migrate lock from Node1, queue lock_1 to the tail of converting list. After dlm recovery, converting list in the master of lockresA(Node3) will be: converting list head <-> lock_3(NL->EX) <->lock_1(EX<->NL). Requested mode of lock_3 is not compatible with the granted mode of lock_1, so it can not be granted. and lock_1 can not downconvert because covnerting queue is strictly FIFO. So a deadlock is created. We think function dlm_process_recovery_data() should queue_ast for lock_1 or alter the order of lock_1 and lock_3, so dlm_thread can process lock_1 first. And if there are multiple downconverting locks, they must convert form PR to NL, so no need to sort them. Signed-off-by: -
Joseph Qi authored
Once JBD2_ABORT is set, ocfs2_commit_cache will fail in ocfs2_commit_thread. Then it will get into a loop with mass logs. This will meaninglessly consume a larger number of resource and may lead to the system hanging. So limit printk in this case. [akpm@linux-foundation.org: document the msleep] Signed-off-by:
Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
George Spelvin authored
There are two standard techniques for dereferencing structures pointed to by void *: cast to the right type each time they're used, or assign to local variables of the right type. But there's no need to do *both*. Signed-off-by:
George Spelvin <linux@horizon.com> Cc: Mark Fasheh <mfasheh@suse.com> Acked-by:
Joel Becker <jlbec@evilplan.org> Reviewed-by:
Jie Liu <jeff.liu@oracle.com> Signed-off-by:
-
Fabian Frederick authored
Replace strncpy(size 63) by defined value. Signed-off-by:
-
Fabian Frederick authored
Static values are automatically initialized to NULL. Signed-off-by:
-
Fabian Frederick authored
Direct conversion of one KERN_DEBUG message without DEBUG definition (suggested by Josh Triplett) That message will now be disabled by default. (see Documentation/CodingStyle Chapter 13) Signed-off-by:
Josh Triplett <josh@joshtriplett.org> Signed-off-by:
-
Fabian Frederick authored
Add ODEBUG: prefix to pr_fmt Signed-off-by:
-
Fabian Frederick authored
Convert all printk to pr_foo() except KERN_DEBUG (see Documentation/CodingStyle Chapter 13) Signed-off-by:
-
Fabian Frederick authored
Add pr_fmt based on module name. Signed-off-by:
-
Fabian Frederick authored
Signed-off-by:
-
Fabian Frederick authored
Fix function parameter documentation EXPORT_SYMBOLS moved after corresponding functions Small coding style and checkpatch warning fixes Signed-off-by:
-
Andrew Morton authored
__uc32_ioremap_pfn_caller() should return NULL when the pfn is found to be invalid. From a recommendation by Guan Xuetao. Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Fabian Frederick <fabf@skynet.be> Signed-off-by:
-
Fabian Frederick authored
Coalesce formats. [akpm@linux-foundation.org: undo crazy long line] Signed-off-by:
-
Fabian Frederick authored
Update the last pr_warning callsite in fs branch Signed-off-by:
-
Christoph Lameter authored
__get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Signed-off-by:Christoph Lameter <cl@linux.com> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> [compilation only] Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by:
-
Fabian Frederick authored
Static values are automatically initialized to NULL. Signed-off-by:
Anton Altaparmakov <anton@tuxera.com> Signed-off-by:
-
Heinrich Schuchardt authored
Without this patch fanotify_init does not validate the value passed in event_f_flags. When a fanotify event is read from the fanotify file descriptor a new file descriptor is created where file.f_flags = event_f_flags. Internal and external open flags are stored together in field f_flags of struct file. Hence, an application might create file descriptors with internal flags like FMODE_EXEC, FMODE_NOCMTIME set. Jan Kara and Eric Paris both aggreed that this is a bug and the value of event_f_flags should be checked: https://lkml.org/lkml/2014/4/29/522 https://lkml.org/lkml/2014/4/29/539 This updated patch version considers the comments by Michael Kerrisk in https://lkml.org/lkml/2014/5/4/10 With the patch the value of event_f_flags is checked. When specifying an invalid value error EINVAL is returned. Internal flags are disallowed. File creation flags are disallowed: O_CREAT, O_DIRECTORY, O_EXCL, O_NOCTTY, O_NOFOLLOW, O_TRUNC, and O_TTY_INIT. Flags which do not make sense with fanotify are disallowed: __O_TMPFILE, O_PATH, FASYNC, and O_DIRECT. This leaves us with the following allowed values: O_RDONLY, O_WRONLY, O_RDWR are basic functionality. The are stored in the bits given by O_ACCMODE. O_APPEND is working as expected. The value might be useful in a logging application which appends the current status each time the log is opened. O_LARGEFILE is needed for files exceeding 4GB on 32bit systems. O_NONBLOCK may be useful when monitoring slow devices like tapes. O_NDELAY is equal to O_NONBLOCK except for platform parisc. To avoid code breaking on parisc either both flags should be allowed or none. The patch allows both. __O_SYNC and O_DSYNC may be used to avoid data loss on power disruption. O_NOATIME may be useful to reduce disk activity. O_CLOEXEC may be useful, if separate processes shall be used to scan files. Once this patch is accepted, the fanotify_init.2 manpage has to be updated. Signed-off-by:
Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by:
Jan Kara <jack@suse.cz> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Signed-off-by:
-
Heinrich Schuchardt authored
If fanotify_mark is called with illegal value of arguments flags and marks it usually returns EINVAL. When fanotify_mark is called with FAN_MARK_FLUSH the argument flags is not checked for irrelevant flags like FAN_MARK_IGNORED_MASK. The patch removes this inconsistency. If an irrelevant flag is set error EINVAL is returned. Signed-off-by:
Michael Kerrisk <mtk.manpages@gmail.com> Acked-by:
-
David Cohen authored
Do not initialize private_destroy_list twice. list_replace_init() already takes care of initializing private_destroy_list. We don't need to initialize it with LIST_HEAD() beforehand. Signed-off-by:
David Cohen <david.a.cohen@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by:
-
Heinrich Schuchardt authored
Before the patch, read creates FAN_ACCESS_PERM and FAN_ACCESS events, readdir creates only FAN_ACCESS_PERM events. This is inconsistent. After the patch, readdir creates FAN_ACCESS_PERM and FAN_ACCESS events. Signed-off-by:
-
Heinrich Schuchardt authored
Originally from Tvrtko Ursulin (https://lkml.org/lkml/2011/1/12/112) Avoid having to provide a fake/invalid fd and path when flushing marks Currently for a group to flush marks it has set it needs to provide a fake or invalid (but resolvable) file descriptor and path when calling fanotify_mark. This patch pulls the flush handling a bit up so file descriptor and path are completely ignored when flushing. I reworked the patch to be applicable again (the signature of fanotify_mark has changed since Tvrtko's work). Signed-off-by:
Eric Paris <eparis@redhat.com> Signed-off-by:
-
Fabian Frederick authored
Replace seq_printf where possible + coalesce formats from 2 existing seq_puts Signed-off-by:
-
Fabian Frederick authored
All printk converted to pr_foo() except internal.h: printk(KERN_DEBUG Coalesce formats. Add pr_fmt Signed-off-by:
-
Tetsuo Handa authored
Commit 786235ee ("kthread: make kthread_create() killable") meant for allowing kthread_create() to abort as soon as killed by the OOM-killer. But returning -ENOMEM is wrong if killed by SIGKILL from userspace. Change kthread_create() to return -EINTR upon SIGKILL. Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Acked-by:
David Rientjes <rientjes@google.com> Cc: <stable@vger.kernel.org> [3.13+] Signed-off-by:
-
Naoya Horiguchi authored
Currently hugepage migration is available for all archs which support pmd-level hugepage, but testing is done only for x86_64 and there're bugs for other archs. So to avoid breaking such archs, this patch limits the availability strictly to x86_64 until developers of other archs get interested in enabling this feature. Simply disabling hugepage migration on non-x86_64 archs is not enough to fix the reported problem where sys_move_pages() hits the BUG_ON() in follow_page(FOLL_GET), so let's fix this by checking if hugepage migration is supported in vma_migratable(). Signed-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reported-by:
Michael Ellerman <mpe@ellerman.id.au> Tested-by:
Hugh Dickins <hughd@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Miller <davem@davemloft.net> Cc: <stable@vger.kernel.org> [3.12+] Signed-off-by:
-
Hugh Dickins authored
Trinity reports BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:47 in_atomic(): 0, irqs_disabled(): 0, pid: 5787, name: trinity-c27 __might_sleep < down_write < __put_anon_vma < page_get_anon_vma < migrate_pages < compact_zone < compact_zone_order < try_to_compact_pages .. Right, since conversion to mutex then rwsem, we should not put_anon_vma() from inside an rcu_read_lock()ed section: fix the two places that did so. And add might_sleep() to anon_vma_free(), as suggested by Peter Zijlstra. Fixes: 88c22088 ("mm: optimize page_lock_anon_vma() fast-path") Reported-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
Andi Kleen authored
Horiguchi-san has done most of the work on hwpoison in the last years and he also does most of the reviewing. So I'm passing on the hwpoison maintainership to him. Signed-off-by:
Andi Kleen <ak@linux.intel.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
-
Joe Perches authored
Might as well be the get_maintainer maintainer... Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Konstantin Khlebnikov authored
Recently added page-cache dumping is known to be a little bit racy. But after race with truncate it just dies due to unhandled SIGBUS when it tries to poke pages beyond the new end of file. This patch adds handler for SIGBUS which skips the rest of the file. Signed-off-by:
Konstantin Khlebnikov <koct9i@gmail.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Linus Torvalds authored
Merge tag 'devicetree-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux into next Pull DeviceTree updates from Rob Herring: - Another round of clean-up of FDT related code in architecture code. This removes knowledge of internal FDT details from most architectures except powerpc. - Conversion of kernel's custom FDT parsing code to use libfdt. - DT based initialization for generic serial earlycon. The introduction of generic serial earlycon support went in through the tty tree. - Improve the platform device naming for DT probed devices to ensure unique naming and use parent names instead of a global index. - Fix a race condition in of_update_property. - Unify the various linker section OF match tables and fix several function prototype errors. - Update platform_get_irq_byname to work in deferred probe cases. - 2 binding doc updates * tag 'devicetree-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (58 commits) of: handle NULL node in next_child iterators of/irq: provide more wrappers for !CONFIG_OF devicetree: bindings: Document micrel vendor prefix dt: bindings: dwc2: fix required value for the phy-names property of_pci_irq: kill useless variable in of_irq_parse_pci() of/irq: do irq resolution in platform_get_irq_byname() of: Add a testcase for of_find_node_by_path() of: Make of_find_node_by_path() handle /aliases of: Create unlocked version of for_each_child_of_node() lib: add glibc style strchrnul() variant of: Handle memory@0 node on PPC32 only pci/of: Remove dead code of: fix race between search and remove in of_update_property() of: Use NULL for pointers of: Stop naming platform_device using dcr address of: Ensure unique names without sacrificing determinism tty/serial: pl011: add DT based earlycon support of/fdt: add FDT serial scanning for earlycon of/fdt: add FDT address translation support serial: earlycon: add DT support ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound updates from Takashi Iwai: "At this time, majority of changes come from ASoC world while we got a few new drivers in other places for FireWire and USB. There have been lots of ASoC core cleanups / refactoring, but very little visible to external users. ASoC: - Support for specifying aux CODECs in DT - Removal of the deprecated mux and enum macros - More moves towards full componentisation - Removal of some unused I/O code - Lots of cleanups, fixes and enhancements to the davinci, Freescale, Haswell and Realtek drivers - Several drivers exposed directly in Kconfig for use with simple-card - GPIO descriptor support for jacks - More updates and fixes to the Freescale SSI, Intel and rsnd drivers - New drivers for Cirrus CS42L56, Realtek RT5639, RT5642 and RT5651 and ST STA350, Analog Devices ADAU1361, ADAU1381, ADAU1761 and ADAU1781, and Realtek RT5677 HD-audio: - Clean up Dell headset quirks - Noise fixes for Dell and Sony laptops - Thinkpad T440 dock fix - Realtek codec updates (ALC293,ALC233,ALC3235) - Tegra HD-audio HDMI support FireWire-audio: - FireWire audio stack enhancement (AMDTP, MIDI), support for incoming isochronous stream and duplex streams with timestamp synchronization - BeBoB-based devices support - Fireworks-based device support USB-audio: - Behringer BCD2000 USB device support Misc: - Clean up of a few old drivers, atmel, fm801, etc" * tag 'sound-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (480 commits) ASoC: Fix wrong argument for card remove callbacks ASoC: free jack GPIOs before the sound card is freed ALSA: firewire-lib: Remove a comment about restriction of asynchronous operation ASoC: cache: Fix error code when not using ASoC level cache ALSA: hda/realtek - Fix COEF widget NID for ALC260 replacer fixup ALSA: hda/realtek - Correction of fixup codes for PB V7900 laptop ALSA: firewire-lib: Use IEC 61883-6 compliant labels for Raw Audio data ASoC: add RT5677 CODEC driver ASoC: intel: The Baytrail/MAX98090 driver depends on I2C ASoC: rt5640: Add the function "get_clk_info" to RL6231 shared support ASoC: rt5640: Add the function of the PLL clock calculation to RL6231 shared support ASoC: rt5640: Add RL6231 class device shared support for RT5640, RT5645 and RT5651 ASoC: cache: Fix possible ZERO_SIZE_PTR pointer dereferencing error. ASoC: Add helper functions to cast from DAPM context to CODEC/platform ALSA: bebob: sizeof() vs ARRAY_SIZE() typo ASoC: wm9713: correct mono out PGA sources ALSA: synth: emux: soundfont.c: Cleaning up memory leak ASoC: fsl: Remove dependencies of boards for SND_SOC_EUKREA_TLV320 ASoC: fsl-ssi: Use regmap ASoC: fsl-ssi: reorder and document fsl_ssi_private ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linuxLinus Torvalds authored
Pull omap fbdev changes from Tomi Valkeinen: - DT support for the panel drivers that were still missing it - TI AM43xx support - TI OMAP5 support * tag 'fbdev-omap-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (46 commits) OMAPDSS: move 'compatible' converter to omapdss driver OMAPDSS: HDMI: fix devm_ioremap_resource error checks OMAPDSS: HDMI: remove unused defines OMAPDSS: HDMI: cleanup WP ioremaps OMAPDSS: panel NEC-NL8048HL11 DT support Doc/DT: Add DT binding documentation for TPO td043mtea1 panel OMAPDSS: Panel TPO-TD043MTEA1 DT support Doc/DT: Add DT binding documentation for SHARP LS037V7DW01 OMAPDSS: panel sharp-ls037v7dw01 DT support OMAPDSS: panel-sharp-ls037v7dw01: update to use gpiod Doc/DT: Add binding doc for lgphilips,lb035q02.txt OMAPDSS: panel-lgphilips-lb035q02: Add DT support OMAPDSS: panel-lgphilips-lb035q02: use gpiod for enable gpio OMAPDSS: hdmi5_core: Fix compilation with OMAP5_DSS_HDMI_AUDIO OMAPDSS: panel-dpi: enable-gpio OMAPDSS: Fix writes to DISPC_POL_FREQ Doc/DT: Add OMAP5 DSS DT bindings OMAPDSS: HDMI: cleanup ioremaps OMAPDSS: HDMI: Add OMAP5 HDMI support OMAPDSS: HDMI: PLL changes for OMAP5 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linuxLinus Torvalds authored
Pull main fbdev changes from Tomi Valkeinen: "Mainly fixes and small improvements. The biggest change seems to be backlight control support for mx3fb" * tag 'fbdev-main-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (31 commits) drivers/video/fbdev/fb-puv3.c: Add header files for function unifb_mmap video: fbdev: s3fb.c: Fix for possible null pointer dereference video: fbdev: grvga.c: Fix for possible null pointer dereference matroxfb: perform a dummy read of M_STATUS video: of: display_timing: fix default native-mode setting video: delete unneeded call to platform_get_drvdata video: mx3fb: Add backlight control support video: omap: delete support for early fbmem allocation video: of: display_timing: remove two unsafe error messages fbdev: fbmem: remove positive test on unsigned values fbcon: Fix memory leak in con2fb_release_oldinfo() video: Kconfig: Add a dependency to the Goldfish framebuffer driver video: exynos: Add a dependency to the menu video: mx3fb: Use devm_kzalloc video/nuc900: allow modular build video: atmel needs FB_BACKLIGHT video: export fb_prepare_logo video/mbx: fix building debugfs support video/omap: fix modular build video: clarify I2C dependencies ...
-
Linus Torvalds authored
Merge tag 'pm+acpi-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm into next Pull ACPI and power management updates from Rafael Wysocki: "ACPICA is the leader this time (63 commits), followed by cpufreq (28 commits), devfreq (15 commits), system suspend/hibernation (12 commits), ACPI video and ACPI device enumeration (10 commits each). We have no major new features this time, but there are a few significant changes of how things work. The most visible one will probably be that we are now going to create platform devices rather than PNP devices by default for ACPI device objects with _HID. That was long overdue and will be really necessary to be able to use the same drivers for the same hardware blocks on ACPI and DT-based systems going forward. We're not expecting fallout from this one (as usual), but it's something to watch nevertheless. The second change having a chance to be visible is that ACPI video will now default to using native backlight rather than the ACPI backlight interface which should generally help systems with broken Win8 BIOSes. We're hoping that all problems with the native backlight handling that we had previously have been addressed and we are in a good enough shape to flip the default, but this change should be easy enough to revert if need be. In addition to that, the system suspend core has a new mechanism to allow runtime-suspended devices to stay suspended throughout system suspend/resume transitions if some extra conditions are met (generally, they are related to coordination within device hierarchy). However, enabling this feature requires cooperation from the bus type layer and for now it has only been implemented for the ACPI PM domain (used by ACPI-enumerated platform devices mostly today). Also, the acpidump utility that was previously shipped as a separate tool will now be provided by the upstream ACPICA along with the rest of ACPICA code, which will allow it to be more up to date and better supported, and we have one new cpuidle driver (ARM clps711x). The rest is improvements related to certain specific use cases, cleanups and fixes all over the place. Specifics: - ACPICA update to upstream version 20140424. That includes a number of fixes and improvements related to things like GPE handling, table loading, headers, memory mapping and unmapping, DSDT/SSDT overriding, and the Unload() operator. The acpidump utility from upstream ACPICA is included too. From Bob Moore, Lv Zheng, David Box, David Binderman, and Colin Ian King. - Fixes and cleanups related to ACPI video and backlight interfaces from Hans de Goede. That includes blacklist entries for some new machines and using native backlight by default. - ACPI device enumeration changes to create platform devices rather than PNP devices for ACPI device objects with _HID by default. PNP devices will still be created for the ACPI device object with device IDs corresponding to real PNP devices, so that change should not break things left and right, and we're expecting to see more and more ACPI-enumerated platform devices in the future. From Zhang Rui and Rafael J Wysocki. - Updates for the ACPI LPSS (Low-Power Subsystem) driver allowing it to handle system suspend/resume on Asus T100 correctly. From Heikki Krogerus and Rafael J Wysocki. - PM core update introducing a mechanism to allow runtime-suspended devices to stay suspended over system suspend/resume transitions if certain additional conditions related to coordination within device hierarchy are met. Related PM documentation update and ACPI PM domain support for the new feature. From Rafael J Wysocki. - Fixes and improvements related to the "freeze" sleep state. They affect several places including cpuidle, PM core, ACPI core, and the ACPI battery driver. From Rafael J Wysocki and Zhang Rui. - Miscellaneous fixes and updates of the ACPI core from Aaron Lu, Bjørn Mork, Hanjun Guo, Lan Tianyu, and Rafael J Wysocki. - Fixes and cleanups for the ACPI processor and ACPI PAD (Processor Aggregator Device) drivers from Baoquan He, Manuel Schölling, Tony Camuso, and Toshi Kani. - System suspend/resume optimization in the ACPI battery driver from Lan Tianyu. - OPP (Operating Performance Points) subsystem updates from Chander Kashyap, Mark Brown, and Nishanth Menon. - cpufreq core fixes, updates and cleanups from Srivatsa S Bhat, Stratos Karafotis, and Viresh Kumar. - Updates, fixes and cleanups for the Tegra, powernow-k8, imx6q, s5pv210, nforce2, and powernv cpufreq drivers from Brian Norris, Jingoo Han, Paul Bolle, Philipp Zabel, Stratos Karafotis, and Viresh Kumar. - intel_pstate driver fixes and cleanups from Dirk Brandewie, Doug Smythies, and Stratos Karafotis. - Enabling the big.LITTLE cpufreq driver on arm64 from Mark Brown. - Fix for the cpuidle menu governor from Chander Kashyap. - New ARM clps711x cpuidle driver from Alexander Shiyan. - Hibernate core fixes and cleanups from Chen Gang, Dan Carpenter, Fabian Frederick, Pali Rohár, and Sebastian Capella. - Intel RAPL (Running Average Power Limit) driver updates from Jacob Pan. - PNP subsystem updates from Bjorn Helgaas and Fabian Frederick. - devfreq core updates from Chanwoo Choi and Paul Bolle. - devfreq updates for exynos4 and exynos5 from Chanwoo Choi and Bartlomiej Zolnierkiewicz. - turbostat tool fix from Jean Delvare. - cpupower tool updates from Prarit Bhargava, Ramkumar Ramachandra and Thomas Renninger. - New ACPI ec_access.c tool for poking at the EC in a safe way from Thomas Renninger" * tag 'pm+acpi-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (187 commits) ACPICA: Namespace: Remove _PRP method support. intel_pstate: Improve initial busy calculation intel_pstate: add sample time scaling intel_pstate: Correct rounding in busy calculation intel_pstate: Remove C0 tracking PM / hibernate: fixed typo in comment ACPI: Fix x86 regression related to early mapping size limitation ACPICA: Tables: Add mechanism to control early table checksum verification. ACPI / scan: use platform bus type by default for _HID enumeration ACPI / scan: always register ACPI LPSS scan handler ACPI / scan: always register memory hotplug scan handler ACPI / scan: always register container scan handler ACPI / scan: Change the meaning of missing .attach() in scan handlers ACPI / scan: introduce platform_id device PNP type flag ACPI / scan: drop unsupported serial IDs from PNP ACPI scan handler ID list ACPI / scan: drop IDs that do not comply with the ACPI PNP ID rule ACPI / PNP: use device ID list for PNPACPI device enumeration ACPI / scan: .match() callback for ACPI scan handlers ACPI / battery: wakeup the system only when necessary power_supply: allow power supply devices registered w/o wakeup source ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
Pull HID patches from Jiri Kosina: - RMI driver for Synaptics touchpads, by Benjamin Tissoires, Andrew Duggan and Jiri Kosina - cleanup of hid-sony driver and improved support for Sixaxis and Dualshock 4, by Frank Praznik - other usual small fixes and support for new device IDs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (29 commits) HID: thingm: thingm_fwinfo[] doesn't need to be global HID: core: add two new usages for digitizer HID: hid-sensor-hub: new device id and quirk for STM Sensor hub HID: usbhid: enable NO_INIT_REPORTS quirk for Semico USB Keykoard HID: hid-sensor-hub: Set report quirk for Microsoft Surface HID: debug: add labels for HID Sensor Usages HID: uhid: Use kmemdup instead of kmalloc + memcpy HID: rmi: do not handle touchscreens through hid-rmi HID: quirk for Saitek RAT7 and MMO7 mices' mode button HID: core: fix validation of report id 0 HID: rmi: fix masks for x and w_x data HID: rmi: fix wrong struct field name HID: rmi: do not fetch more than 16 bytes in a query HID: rmi: check for the existence of some optional queries before reading query 12 HID: i2c-hid: hid report descriptor retrieval changes HID: add missing hid usages HID: hid-sony - allow 3rd party INTEC controller to turn off all leds HID: sony: Add blink support to the Sixaxis and DualShock 4 LEDs HID: sony: Initialize the controller LEDs with a device ID value HID: sony: Use the controller Bluetooth MAC address as the unique value in the battery name string ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivialLinus Torvalds authored
Pull trivial tree changes from Jiri Kosina: "Usual pile of patches from trivial tree that make the world go round" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits) staging: go7007: remove reference to CONFIG_KMOD aic7xxx: Remove obsolete preprocessor define of: dma: doc fixes doc: fix incorrect formula to calculate CommitLimit value doc: Note need of bc in the kernel build from 3.10 onwards mm: Fix printk typo in dmapool.c modpost: Fix comment typo "Modules.symvers" Kconfig.debug: Grammar s/addition/additional/ wimax: Spelling s/than/that/, wording s/destinatary/recipient/ aic7xxx: Spelling s/termnation/termination/ arm64: mm: Remove superfluous "the" in comment of: Spelling s/anonymouns/anonymous/ dma: imx-sdma: Spelling s/determnine/determine/ ath10k: Improve grammar in comments ath6kl: Spelling s/determnine/determine/ of: Improve grammar for of_alias_get_id() documentation drm/exynos: Spelling s/contro/control/ radio-bcm2048.c: fix wrong overflow check doc: printk-formats: do not mention casts for u64/s64 doc: spelling error changes ...
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM updates from Paolo Bonzini: "At over 200 commits, covering almost all supported architectures, this was a pretty active cycle for KVM. Changes include: - a lot of s390 changes: optimizations, support for migration, GDB support and more - ARM changes are pretty small: support for the PSCI 0.2 hypercall interface on both the guest and the host (the latter acked by Catalin) - initial POWER8 and little-endian host support - support for running u-boot on embedded POWER targets - pretty large changes to MIPS too, completing the userspace interface and improving the handling of virtualized timer hardware - for x86, a larger set of changes is scheduled for 3.17. Still, we have a few emulator bugfixes and support for running nested fully-virtualized Xen guests (para-virtualized Xen guests have always worked). And some optimizations too. The only missing architecture here is ia64. It's not a coincidence that support for KVM on ia64 is scheduled for removal in 3.17" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (203 commits) KVM: add missing cleanup_srcu_struct KVM: PPC: Book3S PR: Rework SLB switching code KVM: PPC: Book3S PR: Use SLB entry 0 KVM: PPC: Book3S HV: Fix machine check delivery to guest KVM: PPC: Book3S HV: Work around POWER8 performance monitor bugs KVM: PPC: Book3S HV: Make sure we don't miss dirty pages KVM: PPC: Book3S HV: Fix dirty map for hugepages KVM: PPC: Book3S HV: Put huge-page HPTEs in rmap chain for base address KVM: PPC: Book3S HV: Fix check for running inside guest in global_invalidates() KVM: PPC: Book3S: Move KVM_REG_PPC_WORT to an unused register number KVM: PPC: Book3S: Add ONE_REG register names that were missed KVM: PPC: Add CAP to indicate hcall fixes KVM: PPC: MPIC: Reset IRQ source private members KVM: PPC: Graciously fail broken LE hypercalls PPC: ePAPR: Fix hypercall on LE guest KVM: PPC: BOOK3S: Remove open coded make_dsisr in alignment handler KVM: PPC: BOOK3S: Always use the saved DAR value PPC: KVM: Make NX bit available with magic page KVM: PPC: Disable NX for old magic page using guests KVM: PPC: BOOK3S: HV: Add mixed page-size support for guest ...
-
