- 04 Jan, 2022 12 commits
-
-
Mateusz Palczewski authored
Hide i40e opcode information sent during response to VF in case when untrusted VF tried to change MAC on the VF interface. This is implemented by adding an additional parameter 'hide' to the response sent to VF function that hides the display of error information, but forwards the error code to VF. Previously it was not possible to send response with some error code to VF without displaying opcode information. Fixes: 5c3c48ac ("i40e: implement virtual device interface") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Reviewed-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Jakub Kicinski authored
Merge tag 'mac80211-for-net-2022-01-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Two more changes: - mac80211: initialize a variable to avoid using it uninitialized - mac80211 mesh: put some data structures into the container to fix bugs with and not have to deal with allocation failures * tag 'mac80211-for-net-2022-01-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211: mac80211: mesh: embedd mesh_paths and mpp_paths into ieee80211_if_mesh mac80211: initialize variable have_higher_than_11mbit ==================== Link: https://lore.kernel.org/r/20220104144449.64937-1-johannes@sipsolutions.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Pavel Skripkin authored
Syzbot hit NULL deref in rhashtable_free_and_destroy(). The problem was in mesh_paths and mpp_paths being NULL. mesh_pathtbl_init() could fail in case of memory allocation failure, but nobody cared, since ieee80211_mesh_init_sdata() returns void. It led to leaving 2 pointers as NULL. Syzbot has found null deref on exit path, but it could happen anywhere else, because code assumes these pointers are valid. Since all ieee80211_*_setup_sdata functions are void and do not fail, let's embedd mesh_paths and mpp_paths into parent struct to avoid adding error handling on higher levels and follow the pattern of others setup_sdata functions Fixes: 60854fd9 ("mac80211: mesh: convert path table to rhashtable") Reported-and-tested-by: syzbot+860268315ba86ea6b96b@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Link: https://lore.kernel.org/r/20211230195547.23977-1-paskripkin@gmail.comSigned-off-by: Johannes Berg <johannes.berg@intel.com>
-
Tom Rix authored
Clang static analysis reports this warnings mlme.c:5332:7: warning: Branch condition evaluates to a garbage value have_higher_than_11mbit) ^~~~~~~~~~~~~~~~~~~~~~~ have_higher_than_11mbit is only set to true some of the time in ieee80211_get_rates() but is checked all of the time. So have_higher_than_11mbit needs to be initialized to false. Fixes: 5d6a1b06 ("mac80211: set basic rates earlier") Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20211223162848.3243702-1-trix@redhat.comSigned-off-by: Johannes Berg <johannes.berg@intel.com>
-
Eric Dumazet authored
tx_queue_len can be set to ~0U, we need to be more careful about overflows. __fls(0) is undefined, as this report shows: UBSAN: shift-out-of-bounds in net/sched/sch_qfq.c:1430:24 shift exponent 51770272 is too large for 32-bit type 'int' CPU: 0 PID: 25574 Comm: syz-executor.0 Not tainted 5.16.0-rc7-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x201/0x2d8 lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:151 [inline] __ubsan_handle_shift_out_of_bounds+0x494/0x530 lib/ubsan.c:330 qfq_init_qdisc+0x43f/0x450 net/sched/sch_qfq.c:1430 qdisc_create+0x895/0x1430 net/sched/sch_api.c:1253 tc_modify_qdisc+0x9d9/0x1e20 net/sched/sch_api.c:1660 rtnetlink_rcv_msg+0x934/0xe60 net/core/rtnetlink.c:5571 netlink_rcv_skb+0x200/0x470 net/netlink/af_netlink.c:2496 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x814/0x9f0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0xaea/0xe60 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg net/socket.c:724 [inline] ____sys_sendmsg+0x5b9/0x910 net/socket.c:2409 ___sys_sendmsg net/socket.c:2463 [inline] __sys_sendmsg+0x280/0x370 net/socket.c:2492 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 462dbc91 ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Hellwig authored
This code used to copy in an unsigned long worth of data before the sockptr_t conversion, so restore that. Fixes: a7b75c5a ("net: pass a sockptr_t into ->setsockopt") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Andrew Lunn says: ==================== Fix traceroute in the presence of SRv6 When using SRv6 the destination IP address in the IPv6 header is not always the true destination, it can be a router along the path that SRv6 is using. When ICMP reports an error, e.g, time exceeded, which is what traceroute uses, it included the packet which invoked the error into the ICMP message body. Upon receiving such an ICMP packet, the invoking packet is examined and an attempt is made to find the socket which sent the packet, so the error can be reported. Lookup is performed using the source and destination address. If the intermediary router IP address from the IP header is used, the lookup fails. It is necessary to dig into the header and find the true destination address in the Segment Router header, SRH. v2: Play games with the skb->network_header rather than clone the skb v3: Move helpers into seg6.c v4: Move short helper into header file. Rework getting SRH destination address v5: Fix comment to describe function, not caller Patch 1 exports a helper which can find the SRH in a packet Patch 2 does the actual examination of the invoking packet Patch 3 makes use of the results when trying to find the socket. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
When finding the socket to report an error on, if the invoking packet is using Segment Routing, the IPv6 destination address is that of an intermediate router, not the end destination. Extract the ultimate destination address from the segment address. This change allows traceroute to function in the presence of Segment Routing. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
RFC8754 says: ICMP error packets generated within the SR domain are sent to source nodes within the SR domain. The invoking packet in the ICMP error message may contain an SRH. Since the destination address of a packet with an SRH changes as each segment is processed, it may not be the destination used by the socket or application that generated the invoking packet. For the source of an invoking packet to process the ICMP error message, the ultimate destination address of the IPv6 header may be required. The following logic is used to determine the destination address for use by protocol-error handlers. * Walk all extension headers of the invoking IPv6 packet to the routing extension header preceding the upper-layer header. - If routing header is type 4 Segment Routing Header (SRH) o The SID at Segment List[0] may be used as the destination address of the invoking packet. Mangle the skb so the network header points to the invoking packet inside the ICMP packet. The seg6 helpers can then be used on the skb to find any segment routing headers. If found, mark this fact in the IPv6 control block of the skb, and store the offset into the packet of the SRH. Then restore the skb back to its old state. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
An ICMP error message can contain in its message body part of an IPv6 packet which invoked the error. Such a packet might contain a segment router header. Export get_srh() so the ICMP code can make use of it. Since his changes the scope of the function from local to global, add the seg6_ prefix to keep the namespace clean. And move it into seg6.c so it is always available, not just when IPV6_SEG6_LWTUNNEL is enabled. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.open-mesh.org/linux-mergeJakub Kicinski authored
Simon Wunderlich says: ==================== Here is a batman-adv bugfix: - avoid sending link-local multicast to multicast routers, by Linus Lüssing * tag 'batadv-net-pullrequest-20220103' of git://git.open-mesh.org/linux-merge: batman-adv: mcast: don't send link-local multicast to mcast routers ==================== Link: https://lore.kernel.org/r/20220103171203.1124980-1-sw@simonwunderlich.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Florian Fainelli authored
This reverts commit b45396af ("net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register") since it prevents any system that uses a fixed PHY without a GPIO descriptor from properly working: [ 5.971952] brcm-systemport 9300000.ethernet: failed to register fixed PHY [ 5.978854] brcm-systemport: probe of 9300000.ethernet failed with error -22 [ 5.986047] brcm-systemport 9400000.ethernet: failed to register fixed PHY [ 5.992947] brcm-systemport: probe of 9400000.ethernet failed with error -22 Fixes: b45396af ("net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220103193453.1214961-1-f.fainelli@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 03 Jan, 2022 2 commits
-
-
David Ahern authored
As Nicolas noted, if gateway validation fails walking the multipath attribute the code should jump to the cleanup to free previously allocated memory. Fixes: 1ff15a71 ("ipv6: Check attribute length for RTA_GATEWAY when deleting multipath route") Signed-off-by: David Ahern <dsahern@kernel.org> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Link: https://lore.kernel.org/r/20220103170555.94638-1-dsahern@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
David Ahern authored
ip6_route_multipath_del loop continues processing the multipath attribute even if delete of a nexthop path fails. For consistency, do the same if the gateway attribute is invalid. Fixes: 1ff15a71 ("ipv6: Check attribute length for RTA_GATEWAY when deleting multipath route") Signed-off-by: David Ahern <dsahern@kernel.org> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Link: https://lore.kernel.org/r/20220103171911.94739-1-dsahern@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 02 Jan, 2022 9 commits
-
-
Markus Koch authored
commit 26eee021 ("net/fsl: fix a bug in xgmac_mdio") fixed a bug in the QorIQ mdio driver but left the (now unused) incorrect bit definition for MDIO_DATA_BSY in the code. This commit removes it. Signed-off-by: Markus Koch <markus@notsyncing.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Toye authored
Hytera makes a range of digital (DMR) radios. These radios can be programmed to a allow a computer to control them over Ethernet over USB, either using NCM or RNDIS. This commit adds support for RNDIS for Hytera radios. I tested with a Hytera PD785 and a Hytera MD785G. When these radios are programmed to set up a Radio to PC Network using RNDIS, an USB interface will be added with class 2 (Communications), subclass 2 (Abstract Modem Control) and an interface protocol of 255 ("vendor specific" - lsusb even hints "MSFT RNDIS?"). This patch is similar to the solution of this StackOverflow user, but that only works for the Hytera MD785: https://stackoverflow.com/a/53550858 To use the "Radio to PC Network" functionality of Hytera DMR radios, the radios need to be programmed correctly in CPS (Hytera's Customer Programming Software). "Forward to PC" should be checked in "Network" (under "General Setting" in "Conventional") and the "USB Network Communication Protocol" should be set to RNDIS. Signed-off-by: Thomas Toye <thomas@toye.io> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
The same fix in commit 5ec7d18d ("sctp: use call_rcu to free endpoint") is also needed for dumping one asoc and sock after the lookup. Fixes: 86fdb344 ("sctp: ensure ep is not destroyed before doing the dump") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Arthur Kiyanovski says: ==================== ENA driver bug fixes Patchset V2 chages: ------------------- Updated SHA1 of Fixes tag in patch 3/3 to be 12 digits long Original cover letter: ---------------------- ENA driver bug fixes ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arthur Kiyanovski authored
The role of ena_calc_max_io_queue_num() is to return the number of queues supported by the device, which means the return value should be >=0. The function that calls ena_calc_max_io_queue_num(), checks the return value. If it is 0, it means the device reported it supports 0 IO queues. This case is considered an error and is handled by the calling function accordingly. However the current implementation of ena_calc_max_io_queue_num() is wrong, since when it detects the device supports 0 IO queues, it returns -EFAULT. In such a case the calling function doesn't detect the error, and therefore doesn't handle it. This commit changes ena_calc_max_io_queue_num() to return 0 in case the device reported it supports 0 queues, allowing the calling function to properly handle the error case. Fixes: 736ce3f4 ("net: ena: make ethtool -l show correct max number of queues") Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arthur Kiyanovski authored
A wrong request id received from the device is a sign that something is wrong with it, therefore trigger a device reset. Also add some debug info to the "Page is NULL" print to make it easier to debug. Fixes: 1738cd3e ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arthur Kiyanovski authored
ena_com_tx_comp_req_id_get() checks the req_id of a received completion, and if it is out of bounds returns -EINVAL. This is a sign that something is wrong with the device and it needs to be reset. The current code does not reset the device in this case, which leaves the driver in an undefined state, where this completion is not properly handled. This commit adds a call to handle_invalid_req_id() in ena_clean_tx_irq() and ena_clean_xdp_irq() which resets the device to fix the issue. This commit also removes unnecessary request id checks from validate_tx_req_id() and validate_xdp_req_id(). This check is unneeded because it was already performed in ena_com_tx_comp_req_id_get(), which is called right before these functions. Fixes: 548c4940 ("net: ena: Implement XDP_TX action") Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gagan Kumar authored
Add neighbour source flag in mctp_neigh_remove(...) to allow removal of only static neighbours. This should be a no-op change and might be useful later when mctp can have MCTP_NEIGH_DISCOVER neighbours. Signed-off-by: Gagan Kumar <gagan1kumar.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Linus Lüssing authored
The addition of routable multicast TX handling introduced a bug/regression for packets with a link-local multicast destination: These packets would be sent to all batman-adv nodes with a multicast router and to all batman-adv nodes with an old version without multicast router detection. This even disregards the batman-adv multicast fanout setting, which can potentially lead to an unwanted, high number of unicast transmissions or even congestion. Fixing this by avoiding to send link-local multicast packets to nodes in the multicast router list. Fixes: 11d458c1 ("batman-adv: mcast: apply optimizations for routable packets, too") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
-
- 01 Jan, 2022 3 commits
-
-
Haimin Zhang authored
struct tipc_socket_addr.ref has a 4-byte hole,and __tipc_getname() currently copying it to user space,causing kernel-infoleak. BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline] BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline] lib/usercopy.c:33 BUG: KMSAN: kernel-infoleak in _copy_to_user+0x1c9/0x270 lib/usercopy.c:33 lib/usercopy.c:33 instrument_copy_to_user include/linux/instrumented.h:121 [inline] instrument_copy_to_user include/linux/instrumented.h:121 [inline] lib/usercopy.c:33 _copy_to_user+0x1c9/0x270 lib/usercopy.c:33 lib/usercopy.c:33 copy_to_user include/linux/uaccess.h:209 [inline] copy_to_user include/linux/uaccess.h:209 [inline] net/socket.c:287 move_addr_to_user+0x3f6/0x600 net/socket.c:287 net/socket.c:287 __sys_getpeername+0x470/0x6b0 net/socket.c:1987 net/socket.c:1987 __do_sys_getpeername net/socket.c:1997 [inline] __se_sys_getpeername net/socket.c:1994 [inline] __do_sys_getpeername net/socket.c:1997 [inline] net/socket.c:1994 __se_sys_getpeername net/socket.c:1994 [inline] net/socket.c:1994 __x64_sys_getpeername+0xda/0x120 net/socket.c:1994 net/socket.c:1994 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_x64 arch/x86/entry/common.c:51 [inline] arch/x86/entry/common.c:82 do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was stored to memory at: tipc_getname+0x575/0x5e0 net/tipc/socket.c:757 net/tipc/socket.c:757 __sys_getpeername+0x3b3/0x6b0 net/socket.c:1984 net/socket.c:1984 __do_sys_getpeername net/socket.c:1997 [inline] __se_sys_getpeername net/socket.c:1994 [inline] __do_sys_getpeername net/socket.c:1997 [inline] net/socket.c:1994 __se_sys_getpeername net/socket.c:1994 [inline] net/socket.c:1994 __x64_sys_getpeername+0xda/0x120 net/socket.c:1994 net/socket.c:1994 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_x64 arch/x86/entry/common.c:51 [inline] arch/x86/entry/common.c:82 do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was stored to memory at: msg_set_word net/tipc/msg.h:212 [inline] msg_set_destport net/tipc/msg.h:619 [inline] msg_set_word net/tipc/msg.h:212 [inline] net/tipc/socket.c:1486 msg_set_destport net/tipc/msg.h:619 [inline] net/tipc/socket.c:1486 __tipc_sendmsg+0x44fa/0x5890 net/tipc/socket.c:1486 net/tipc/socket.c:1486 tipc_sendmsg+0xeb/0x140 net/tipc/socket.c:1402 net/tipc/socket.c:1402 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg net/socket.c:724 [inline] sock_sendmsg_nosec net/socket.c:704 [inline] net/socket.c:2409 sock_sendmsg net/socket.c:724 [inline] net/socket.c:2409 ____sys_sendmsg+0xe11/0x12c0 net/socket.c:2409 net/socket.c:2409 ___sys_sendmsg net/socket.c:2463 [inline] ___sys_sendmsg net/socket.c:2463 [inline] net/socket.c:2492 __sys_sendmsg+0x704/0x840 net/socket.c:2492 net/socket.c:2492 __do_sys_sendmsg net/socket.c:2501 [inline] __se_sys_sendmsg net/socket.c:2499 [inline] __do_sys_sendmsg net/socket.c:2501 [inline] net/socket.c:2499 __se_sys_sendmsg net/socket.c:2499 [inline] net/socket.c:2499 __x64_sys_sendmsg+0xe2/0x120 net/socket.c:2499 net/socket.c:2499 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_x64 arch/x86/entry/common.c:51 [inline] arch/x86/entry/common.c:82 do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Local variable skaddr created at: __tipc_sendmsg+0x2d0/0x5890 net/tipc/socket.c:1419 net/tipc/socket.c:1419 tipc_sendmsg+0xeb/0x140 net/tipc/socket.c:1402 net/tipc/socket.c:1402 Bytes 4-7 of 16 are uninitialized Memory access of size 16 starts at ffff888113753e00 Data copied to user address 0000000020000280 Reported-by: syzbot+cdbd40e0c3ca02cae3b7@syzkaller.appspotmail.com Signed-off-by: Haimin Zhang <tcs_kernel@tencent.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Link: https://lore.kernel.org/r/1640918123-14547-1-git-send-email-tcs.kernel@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jianguo Wu authored
As Paolo pointed out, the result of ping IPv6 address depends on the running distro. So explicitly checking the available ping feature, as e.g. do the bareudp.sh self-tests. Fixes: 8b3170e0 ("selftests: net: using ping6 for IPv6 in udpgro_fwd.sh") Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn> Link: https://lore.kernel.org/r/825ee22b-4245-dbf7-d2f7-a230770d6e21@163.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf 2021-12-31 We've added 2 non-merge commits during the last 14 day(s) which contain a total of 2 files changed, 3 insertions(+), 3 deletions(-). The main changes are: 1) Revert of an earlier attempt to fix xsk's poll() behavior where it turned out that the fix for a rare problem made it much worse in general, from Magnus Karlsson. (Fyi, Magnus mentioned that a proper fix is coming early next year, so the revert is mainly to avoid slipping the behavior into 5.16.) 2) Minor misc spell fix in BPF selftests, from Colin Ian King. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf, selftests: Fix spelling mistake "tained" -> "tainted" Revert "xsk: Do not sleep in poll() when need_wakeup set" ==================== Link: https://lore.kernel.org/r/20211231160050.16105-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 31 Dec, 2021 6 commits
-
-
David S. Miller authored
David Ahern says: ==================== net: Length checks for attributes within multipath routes Add length checks for attributes within a multipath route (attributes within RTA_MULTIPATH). Motivated by the syzbot report in patch 1 and then expanded to other attributes as noted by Ido. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
lwtunnel_valid_encap_type_attr is used to validate encap attributes within a multipath route. Add length validation checking to the type. lwtunnel_valid_encap_type_attr is called converting attributes to fib{6,}_config struct which means it is used before fib_get_nhs, ip6_route_multipath_add, and ip6_route_multipath_del - other locations that use rtnh_ok and then nla_get_u16 on RTA_ENCAP_TYPE attribute. Fixes: 9ed59592 ("lwtunnel: fix autoload of lwt modules") Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Make sure RTA_GATEWAY for IPv6 multipath route has enough bytes to hold an IPv6 address. Fixes: 6b9ea5a6 ("ipv6: fix multipath route replace error recovery") Signed-off-by: David Ahern <dsahern@kernel.org> Cc: Roopa Prabhu <roopa@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Commit referenced in the Fixes tag used nla_memcpy for RTA_GATEWAY as does the current nla_get_in6_addr. nla_memcpy protects against accessing memory greater than what is in the attribute, but there is no check requiring the attribute to have an IPv6 address. Add it. Fixes: 51ebd318 ("ipv6: add support of equal cost multipath (ECMP)") Signed-off-by: David Ahern <dsahern@kernel.org> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Make sure RTA_FLOW is at least 4B before using. Fixes: 4e902c57 ("[IPv4]: FIB configuration using struct fib_config") Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
syzbot reported uninit-value: ============================================================ BUG: KMSAN: uninit-value in fib_get_nhs+0xac4/0x1f80 net/ipv4/fib_semantics.c:708 fib_get_nhs+0xac4/0x1f80 net/ipv4/fib_semantics.c:708 fib_create_info+0x2411/0x4870 net/ipv4/fib_semantics.c:1453 fib_table_insert+0x45c/0x3a10 net/ipv4/fib_trie.c:1224 inet_rtm_newroute+0x289/0x420 net/ipv4/fib_frontend.c:886 Add helper to validate RTA_GATEWAY length before using the attribute. Fixes: 4e902c57 ("[IPv4]: FIB configuration using struct fib_config") Reported-by: syzbot+d4b9a2851cc3ce998741@syzkaller.appspotmail.com Signed-off-by: David Ahern <dsahern@kernel.org> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 30 Dec, 2021 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from.. Santa? No regressions on our radar at this point. The igc problem fixed here was the last one I was tracking but it was broken in previous releases, anyway. Mostly driver fixes and a couple of largish SMC fixes. Current release - regressions: - xsk: initialise xskb free_list_node, fixup for a -rc7 fix Current release - new code bugs: - mlx5: handful of minor fixes: - use first online CPU instead of hard coded CPU - fix some error handling paths in 'mlx5e_tc_add_fdb_flow()' - fix skb memory leak when TC classifier action offloads are disabled - fix memory leak with rules with internal OvS port Previous releases - regressions: - igc: do not enable crosstimestamping for i225-V models Previous releases - always broken: - udp: use datalen to cap ipv6 udp max gso segments - fix use-after-free in tw_timer_handler due to early free of stats - smc: fix kernel panic caused by race of smc_sock - smc: don't send CDC/LLC message if link not ready, avoid timeouts - sctp: use call_rcu to free endpoint, avoid UAF in sock diag - bridge: mcast: add and enforce query interval minimum - usb: pegasus: do not drop long Ethernet frames - mlx5e: fix ICOSQ recovery flow for XSK - nfc: uapi: use kernel size_t to fix user-space builds" * tag 'net-5.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits) fsl/fman: Fix missing put_device() call in fman_port_probe selftests: net: using ping6 for IPv6 in udpgro_fwd.sh Documentation: fix outdated interpretation of ip_no_pmtu_disc net/ncsi: check for error return from call to nla_put_u32 net: bridge: mcast: fix br_multicast_ctx_vlan_global_disabled helper net: fix use-after-free in tw_timer_handler selftests: net: Fix a typo in udpgro_fwd.sh selftests/net: udpgso_bench_tx: fix dst ip argument net: bridge: mcast: add and enforce startup query interval minimum net: bridge: mcast: add and enforce query interval minimum ipv6: raw: check passed optlen before reading xsk: Initialise xskb free_list_node net/mlx5e: Fix wrong features assignment in case of error net/mlx5e: TC, Fix memory leak with rules with internal port ionic: Initialize the 'lif->dbid_inuse' bitmap igc: Fix TX timestamp support for non-MSI-X platforms igc: Do not enable crosstimestamping for i225-V models net/smc: fix kernel panic caused by race of smc_sock net/smc: don't send CDC/LLC message if link not ready NFC: st21nfca: Fix memory leak in device probe and remove ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc fixes from Greg KH: "Here are two misc driver fixes for 5.16-final: - binder accounting fix to resolve reported problem - nitro_enclaves fix for mmap assert warning output Both of these have been for over a week with no reported issues" * tag 'char-misc-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: nitro_enclaves: Use get_user_pages_unlocked() call to handle mmap assert binder: fix async_free_space accounting for empty parcels
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some small USB driver fixes for 5.16 to resolve some reported problems: - mtu3 driver fixes - typec ucsi driver fix - xhci driver quirk added - usb gadget f_fs fix for reported crash All of these have been in linux-next for a while with no reported problems" * tag 'usb-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: typec: ucsi: Only check the contract if there is a connection xhci: Fresco FL1100 controller should not have BROKEN_MSI quirk set. usb: mtu3: set interval of FS intr and isoc endpoint usb: mtu3: fix list_head check warning usb: mtu3: add memory barrier before set GPD's HWO usb: mtu3: fix interval value for intr and isoc usb: gadget: f_fs: Clear ffs_eventfd in ffs_data_clear.
-
Miaoqian Lin authored
The reference taken by 'of_find_device_by_node()' must be released when not needed anymore. Add the corresponding 'put_device()' in the and error handling paths. Fixes: 18a6c85f ("fsl/fman: Add FMan Port Support") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jianguo Wu authored
udpgro_fwd.sh output following message: ping: 2001:db8:1::100: Address family for hostname not supported Using ping6 when pinging IPv6 addresses. Fixes: a062260a ("selftests: net: add UDP GRO forwarding self-tests") Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
-
xu xin authored
The updating way of pmtu has changed, but documentation is still in the old way. So this patch updates the interpretation of ip_no_pmtu_disc and min_pmtu. See commit 28d35bcd ("net: ipv4: don't let PMTU updates increase route MTU") Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: xu xin <xu.xin16@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5 fixes 2021-12-28 This series provides bug fixes to mlx5 driver. * tag 'mlx5-fixes-2021-12-28' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: Fix wrong features assignment in case of error net/mlx5e: TC, Fix memory leak with rules with internal port ==================== Link: https://lore.kernel.org/r/20211229065352.30178-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jiasheng Jiang authored
As we can see from the comment of the nla_put() that it could return -EMSGSIZE if the tailroom of the skb is insufficient. Therefore, it should be better to check the return value of the nla_put_u32 and return the error code if error accurs. Also, there are many other functions have the same problem, and if this patch is correct, I will commit a new version to fix all. Fixes: 955dc68c ("net/ncsi: Add generic netlink family") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Link: https://lore.kernel.org/r/20211229032118.1706294-1-jiasheng@iscas.ac.cnSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-