- 30 Jun, 2016 21 commits
-
-
Sven Eckelmann authored
The bat_algo functionality in main.c is mostly unrelated to the rest of the content. It still takes up a large portion of this source file (~15%, 103 lines). Moving it to a separate file makes it better visible as a main component of the batman-adv implementation and hides it less in the other helper functions in main.c. Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de>
-
Markus Pargmann authored
The tvlv functionality in main.c is mostly unrelated to the rest of the content. It still takes up a large portion of this source file (~45%, 588 lines). Moving it to a separate file makes it better visible as a main component of the batman-adv implementation and hides it less in the other helper functions in main.c Signed-off-by:
Markus Pargmann <mpa@pengutronix.de> [sven@narfation.org: fix conflicts with current version, fix includes, rewrote commit message] Signed-off-by:
-
Sven Eckelmann authored
It is easier to detect if a include is already there for a used functionality when the includes are ordered. Using an alphabetic order together with the grouping in commit 1e2c2a4f ("batman-adv: Add required includes to all files") makes includes better manageable. Signed-off-by:
-
Sven Eckelmann authored
main.h includes statements which (re)define preprocessor variables which influence the compiled code. This makes it necessary to include it in all files. For example, it redefines pr_fmt used to the module as prefix for each pr_* message. Reported-by:
Antonio Quartulli <a@unstable.cc> Signed-off-by:
-
Linus Lüssing authored
This patch adds a debugfs table with originators and their according multicast flags to help users figure out why multicast optimizations might be enabled or disabled for them. Tested-by:
Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by:
-
Linus Lüssing authored
With this patch changes relevant to a node's own multicast flags are printed to the 'mcast' log level. Tested-by:
-
Linus Lüssing authored
With this patch we are finally able to support multicast optimizations in bridged setups, too. So far, if a bridge was added on top of a soft-interface (e.g. bat0) the batman-adv multicast optimizations needed to be disabled to avoid packetloss. Current Linux bridge implementations and API can now provide us with the so far missing information about interested but "remote" multicast receivers behind bridge ports. The Linux bridge performs the detection of remote participants interested in multicast packets with its own and mature so called IGMP and MLD snooping code and stores that in its database. With the new API provided by the bridge batman-adv can now simply hook into this database. We then reliably announce the gathered multicast listeners to other nodes through the batman-adv translation table. Additionally, the Linux bridge provides us with the information about whether an IGMP/MLD querier exists. If there is none then we need to disable multicast optimizations as we cannot learn about multicast listeners on external, bridged-in host then. Tested-by:
-
Linus Lüssing authored
With this patch IGMP or MLD reports are always flooded. This is necessary for the upcoming bridge integration to function without multicast packet loss. With the report handling so far bridges might miss interested multicast listeners, leading to wrongly excluding ports from multicast packet forwarding. Currently we are treating IGMP/MLD reports, the messages bridges use to learn about interested multicast listeners, just as any other multicast packet: We try to send them to nodes matching its multicast destination. Unfortunately, the destination address of reports of the older IGMPv2/MLDv1 protocol families do not strictly adhere to their own protocol: More precisely, the interested receiver, an IGMPv2 or MLDv1 querier, itself usually does not listen to the multicast destination address of any reports. Therefore with this patch we are simply excluding IGMP/MLD reports from the multicast forwarding code path and keep flooding them. By that any bridge receives them and can properly learn about listeners. To avoid compatibility issues with older nodes not yet implementing this report handling, we need to force them to flood reports: We do this by bumping the multicast TVLV version to 2, effectively disabling their multicast optimization. Tested-by:
-
Andrew Lunn authored
Unfragmented frames which traverse a node have their skb->priority set by looking at the IP ToS byte, or the 802.1p header. However for fragments this is not possible, only one of the fragments will contain the headers. Instead, place the priority into the fragment header and on receiving a fragment, use this information to set the skb->priority for when the fragment is forwarded. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Andrew Lunn authored
BATMAN will set the skb->priority based on the IP precedence or 802.1q tag. However, if it needs to fragment the frame, it currently leaves the fragment skb with the default priority and actually overwrites the priority in the unfragmented frame. Fix this. Signed-off-by:
-
Marek Lindner authored
The ELP interval and throughput override interface settings are initialized with default settings on every time an interface is added to a mesh. This patch prevents this behavior by moving the configuration init to the interface detection routine which runs only once per interface. Signed-off-by:
-
Antonio Quartulli authored
To reduce the field pollution in our main batadv_priv data structure we've already created some substructures so that we could group fields in a convenient manner. However gw_mode and gw_sel_class are still part of the main object. More both fields to the GW private substructure. Signed-off-by:
-
Antonio Quartulli authored
the compiler can optimize functions within the same C file and therefore there is no need to make it explicit. Remove the useless inline attribute for __batadv_store_uint_attr() Signed-off-by:
-
Antonio Quartulli authored
The ogm_emit and ogm_schedule API calls were rather tight to the B.A.T.M.A.N. IV logic and therefore rather difficult to use with other algorithm implementations. Remove such calls and move the surrounding logic into the B.A.T.M.A.N. IV specific code. Signed-off-by:
-
Marek Lindner authored
Signed-off-by:
-
Marek Lindner authored
Signed-off-by:
-
Marek Lindner authored
Signed-off-by:
-
Marek Lindner authored
Also update obsolete email address. Signed-off-by:
-
Simon Wunderlich authored
Signed-off-by:
-
Antonio Quartulli authored
To make it easier to search through the code it is better to print static strings directly instead of using format strings printing constants. This was addressed in a previous patch, but the Gateway table header was not updated accordingly. Signed-off-by:
-
Simon Wunderlich authored
Signed-off-by:
-
- 13 Jun, 2016 2 commits
-
-
Florian Westphal authored
sch_atm returns this when TC_ACT_SHOT classification occurs. But all other schedulers that use tc_classify (htb, hfsc, drr, fq_codel ...) return NET_XMIT_SUCCESS | __BYPASS in this case so just do that in atm. BATMAN uses it as an intermediate return value to signal forwarding vs. buffering, but it did not return POLICED to callers outside of BATMAN. Reviewed-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stefan Wahren authored
Since msleep is based on jiffies the PHY reset could take longer than expected. So use msleep for values greater than 20 msec otherwise usleep_range. Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Acked-by:
Fugang Duan <fugang.duan@nxp.com> Signed-off-by:
-
- 11 Jun, 2016 17 commits
-
-
Hannes Frederic Sowa authored
In IPv6 the ToS values are part of the flowlabel in flowi6 and get extracted during fib rule lookup, but we forgot to correctly initialize the flowlabel before the routing lookup. Reported-by: <liam.mcbirnie@boeing.com> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
David S. Miller authored
Eric Dumazet says: ==================== net_sched: remove qdisc_is_throttled() HTB, CBQ and HFSC pay a very high cost updating the qdisc 'throttled' status that nothing but CBQ seems to use. CBQ usage is flaky anyway, since no qdisc ->enqueue() updates the 'throttled' qdisc status. This looks like some 'optimization' that actually cost more than code without the optimization, and might cause latency issues with CBQ. In my tests, I could achieve a 8 % performance increase in TCP_RR workload through HTB qdisc, in presence of throttled classes, and 5 % without throttled classes. ==================== Signed-off-by: -
Eric Dumazet authored
__QDISC_STATE_THROTTLED bit manipulation is rather expensive for HTB and few others. I already removed it for sch_fq in commit f2600cf0 ("net: sched: avoid costly atomic operation in fq_dequeue()") and so far nobody complained. When one ore more packets are stuck in one or more throttled HTB class, a htb dequeue() performs two atomic operations to clear/set __QDISC_STATE_THROTTLED bit, while root qdisc lock is held. Removing this pair of atomic operations bring me a 8 % performance increase on 200 TCP_RR tests, in presence of throttled classes. This patch has no side effect, since nothing actually uses disc_is_throttled() anymore. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Eric Dumazet authored
Looks like it is only there as some optimization attempt. Since __QDISC_STATE_THROTTLED set/unset is way too expensive, and netem is the last user, just remove this check. Signed-off-by:
-
Eric Dumazet authored
So far no qdisc ever unset the throttled bit at enqueue() time, so CBQ usage of qdisc_is_throttled() was flaky. Since __QDISC_STATE_THROTTLED set/unset is way too expensive considering that only CBQ was eventually caring for this status, it would make sense to implement a Qdisc ops ->is_throttled() if we find that this is needed. Signed-off-by:
-
Eric Dumazet authored
We want to get rid of generic qdisc throttled management, so this qdisc has to use a private flag. Signed-off-by:
-
David S. Miller authored
Pramod Kumar says: ==================== Add MDIO bus multiplexer support for iProc SoCs Broadcom iProc based SoCs use a MDIO bus multiplexer where child buses could be internal as well external to SoCs. These buses could supports MDIO transaction compatible to C-22/C-45. Broadcom MDIO bus multiplexer is an integrated multiplexer where child bus selection and mdio transaction logic lies inside multiplexer itself. To accommodate this multiplexer in existing mux framework below changes were required- 1. Passed MDIO parent bus via mdio_mux_init to MDIO mux framework. This patch set includes MDIO bus multiplexer driver along with above framework change. It includes one external bus node having Ethernet PHY attached and two internal bus node holding PCIe PHYs. This patch series is based on v4.7-rc1 and is available from github- repo: https://github.com/Broadcom/arm64-linux.git branch:mdio-mux-v5 -Changes from v4: - disabled PCIe PHYs from dtsi and enabled in dts file. -Changes from v3: - Unregister and free the parent MDIO bus. - rebased on net-next/master branch. Reason for resend: -Rebased on v4.7-rc1 Changes from v2: -Addressed Rob's comments in this patch regarding typo/grammers. -Addressed David's comments regarding local variables order. -Removed property "mdio-integrated-mux" and used mdiobus_register() in place of of_mdiobus_regsiter(). -removed usage of IS_ERR_OR_NULL to IS_ERR in PCIe PHY driver. Changes from v1: - stop using "brcm,is_c45" from bus node as suggested by Andrew. MDIO PHY driver will logically OR MII_ADDR_C45 into the address when issues any C45 MDIO read/write transaction. ==================== Signed-off-by:
-
Pramod Kumar authored
Add PCI Phy support for Broadcom Northstar2 SoCs. This driver uses the interface from the iproc mdio mux driver to enable the devices respective phys. Reviewed-by:
Jon Mason <jonmason@broadcom.com> Signed-off-by:
Pramod Kumar <pramod.kumar@broadcom.com> Signed-off-by:
-
Pramod Kumar authored
Binding doc for NS2 PCIe PHYs. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Pramod Kumar authored
iProc based SoCs supports the integrated mdio multiplexer which has the bus selection as well as mdio transaction generation logic inside. This multiplexer has child buses for PCIe, SATA, USB and ETH. These buses could be internal or external to SOC where PHYs are attached. These buses could use C-45 or C-22 mdio transaction. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Pramod Kumar authored
Add integrated MDIO multiplexer driver node which contains two mux PCIe bus and one ethernet bus along with phys lying on these bus. Signed-off-by:
-
Pramod Kumar authored
Add DT binding doc for Broadcom MDIO bus multiplexer driver. Reviewed-by:
-
Pramod Kumar authored
Change "mdio-parent-bus" from mandatory section to optional as it won't be required by integrated MDIO multiplexer which has bus selection and mdio transaction generation logic, integrated inside. Signed-off-by:
-
Pramod Kumar authored
An integrated multiplexer uses same address space for "muxed bus selection" and "generation of mdio transaction" hence its good to register parent bus from mux driver. Hence added a mechanism where mux driver could register a parent bus and pass it down to framework via mdio_mux_init api. Signed-off-by:
-
Xin Long authored
Now sctp doesn't change socket state upon shutdown reception. It changes just the assoc state, even though it's a TCP-style socket. For some cases, if we really need to check sk->sk_state, it's necessary to fix this issue, at least when we use ss or netstat to dump, we can get a more exact information. As an improvement, we will change sk->sk_state when we change asoc->state to SHUTDOWN_RECEIVED, and also do it in sctp_shutdown to keep consistent with sctp_close. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo R. Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'mac80211-next-for-davem-2016-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== For the next cycle, we have the following: * the biggest change is Michał's work on integrating FQ/codel with the mac80211 internal software queues * cfg80211 connect result gets clarified for the "no connection at all" case * advertisement of per-interface type capabilities, in case they differ (which makes a lot of sense for some capabilities) * most of the nl80211 & hwsim unprivileged namespace operation changes * human-readable VHT capabilities in debugfs * some other cleanups, like spelling ==================== Signed-off-by:
-
David S. Miller authored
Zi Shen Lim says: ==================== arm64 BPF JIT updates Updates for arm64 eBPF JIT. The main addition here is implementation of bpf_tail_call. Changes since v2: - None. Resubmit per David Miller. Changes since v1: - Added patch #1 to address build error due to missing header inclusion in linux/bpf.h. (Thanks to suggestion and ack by Daniel Borkmann) Ordered it ahead of bpf_tail_call patch #2 so build error is not triggered. ==================== Signed-off-by:
-
