- 03 Nov, 2011 3 commits
-
-
Alex Deucher authored
Some Dell laptops only seem to work with MSIs. This looks like a platform/bios bug. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=37679Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
Some HP laptops only seem to work with MSIs. This looks like a platform/bios bug. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=37679Signed-off-by:
-
Alex Deucher authored
This makes it easier to add quirks for certain systems. Signed-off-by:
-
- 02 Nov, 2011 1 commit
-
-
Thomas Hellstrom authored
We need to redefine a connector as "connected" if it matches a window in the host preferred GUI layout. Otherwise "smart" window managers would turn on Xorg outputs that we don't want to be on. This reinstates the update_layout and adds the following information to the modesetting system. a) Connection status <-> Equivalent to real hardware connection status b) Preferred mode <-> Equivalent to real hardware reading EDID c) Host window position <-> Equivalent to a real hardware scanout address dynamic register. It should be noted that there is no assumption here about what should be displayed and where. Only how to access the host windows. This also bumps minor to signal availability of the new IOCTL. Based on code originally written by Jakob Bornecrantz Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
- 01 Nov, 2011 36 commits
-
-
Alex Deucher authored
Rather than having a quirk list just always check the EDID header when probing. This is the recommended behavior according to the display team. This avoids problems with improperly terminated i2c lines on some boards. This is also what the proprietary driver does. Signed-off-by:
-
Alex Deucher authored
The function didn't work with DP, eDP, or DP bridge connectors and thus confused users as it lead them to believe nothing was connected or the EDID was invalid when in fact is was, just on the aux bus rather an i2c. It should also speed up module loading as it avoids a bunch of extra DDC probing. Signed-off-by:
-
Alex Deucher authored
Use the table version to determine which params to use. Signed-off-by:
-
Alex Deucher authored
set up the params based on the table version number. Signed-off-by:
-
Alex Deucher authored
Use table version numbers for param setup. Signed-off-by:
-
Alex Deucher authored
Leave the common code in radeon_encoders.c and move the atom specific code to atombios_encoders.c. This matches legacy encoder setup and crtc setup. Signed-off-by:
-
Alex Deucher authored
The vram scratch was originally only used on some 7xx asics to work around a hw bug. Allocate the scratch page on all 6xx+ radeons and set the MC_VM_SYSTEM_APERTURE_DEFAULT_ADDR to point to it. We shouldn't ever hit it since we limit the system aperture to vram or vram and AGP, but better safe than sorry. Signed-off-by:
-
Alex Deucher authored
DP MST is DP multi-stream support, part of DP 1.2. v2: switch to a helper macro as suggested by Michel. Signed-off-by:
-
Alex Deucher authored
The existing function was getting too big and complex. Break it down into a more manageable set of functions. Signed-off-by:
-
Alex Deucher authored
Use the regular logic for other bridge chips. Signed-off-by:
-
Alex Deucher authored
Return the encoder id rather than a boolean. This is needed for differentiate between multiple DP bridge chips. Signed-off-by:
-
Ilija Hadzic authored
radeon_driver_irq_preinstall_kms and radeon_driver_irq_uninstall_kms hard code the loop to 6 which happens to be the current maximum number of crtcs and hpd pins; if one day an ASIC with more crtcs (or hpd pins) comes out, this is a trouble waiting to happen. introduce constants for maximum CRTC count, maximum HPD pins count and maximum HDMI blocks count (per FIXME in radeon_irq structure) and correct the loops in radeon_driver_irq_preinstall_kms and radeon_driver_irq_uninstall_kms v2: take care of goofs pointed out by Alex Deucher Signed-off-by:
Ilija Hadzic <ihadzic@research.bell-labs.com> Reviewed-by:
-
Jerome Glisse authored
Cayman seems to be particularly sensitive to read cache returning old data after bind/unbind to GTT. Flush read cache for GTT range with each fences for all new hw. Should fix several rendering glitches. Like V2 flush whole address space V3 also flush shader read cache https://bugs.freedesktop.org/show_bug.cgi?id=40221 https://bugs.freedesktop.org/show_bug.cgi?id=38022 https://bugzilla.redhat.com/show_bug.cgi?id=738790Signed-off-by:
Jerome Glisse <jglisse@redhat.com> Reviewed-by:
-
Jerome Glisse authored
Polarity needs to be set accordingly to connector status (connected or disconnected). Set it up at module init so first hotplug works reliably no matter what is the initial set of connector. Signed-off-by:
-
Alex Deucher authored
The logic was messy and hard to follow. Signed-off-by:
-
Alex Deucher authored
This should make eDP more reliable. Signed-off-by:
-
Alex Deucher authored
CP_COHER_CNTL2 has to be programmed manually when submitting packets to the ring directly rather than programmed via an IB. Signed-off-by:
-
Alex Deucher authored
Move the TC flush before the texture setup to match mesa and the ddx. Also, move the TC flush into the texture setup function. Signed-off-by:
-
Jerome Glisse authored
Since force handling rework of d0d0a225 we could end up bouncing connector status btw disconnected and unknown. When connector status change a call to output_poll_changed happen which in turn ask again for detect but with force set. So set the load detect flags whenever we report the connector as connected or unknown this avoid bouncing btw disconnected and unknown. Signed-off-by:
Alex Deucher <alexdeucher@gmail.com> Signed-off-by:
-
Thomas Hellstrom authored
Signed-off-by:
Jakob Bornecrantz <jakob@vmware.com> Signed-off-by:
-
Thomas Hellstrom authored
This will allow us to attach various properties specific to virtual monitors in the future. Note that we don't export an EDID property for "Virtual" connectors. Signed-off-by:
-
Linus Torvalds authored
Quoth Andrew: - Most of MM. Still waiting for the poweroc guys to get off their butts and review some threaded hugepages patches. - alpha - vfs bits - drivers/misc - a few core kerenl tweaks - printk() features - MAINTAINERS updates - backlight merge - leds merge - various lib/ updates - checkpatch updates * akpm: (127 commits) epoll: fix spurious lockdep warnings checkpatch: add a --strict check for utf-8 in commit logs kernel.h/checkpatch: mark strict_strto<foo> and simple_strto<foo> as obsolete llist-return-whether-list-is-empty-before-adding-in-llist_add-fix wireless: at76c50x: follow rename pack_hex_byte to hex_byte_pack fat: follow rename pack_hex_byte() to hex_byte_pack() security: follow rename pack_hex_byte() to hex_byte_pack() kgdb: follow rename pack_hex_byte() to hex_byte_pack() lib: rename pack_hex_byte() to hex_byte_pack() lib/string.c: fix strim() semantics for strings that have only blanks lib/idr.c: fix comment for ida_get_new_above() lib/percpu_counter.c: enclose hotplug only variables in hotplug ifdef lib/bitmap.c: quiet sparse noise about address space lib/spinlock_debug.c: print owner on spinlock lockup lib/kstrtox: common code between kstrto*() and simple_strto*() functions drivers/leds/leds-lp5521.c: check if reset is successful leds: turn the blink_timer off before starting to blink leds: save the delay values after a successful call to blink_set() drivers/leds/leds-gpio.c: use gpio_get_value_cansleep() when initializing drivers/leds/leds-lm3530.c: add __devexit_p where needed ...
-
Nelson Elhage authored
epoll can acquire recursively acquire ep->mtx on multiple "struct eventpoll"s at once in the case where one epoll fd is monitoring another epoll fd. This is perfectly OK, since we're careful about the lock ordering, but it causes spurious lockdep warnings. Annotate the recursion using mutex_lock_nested, and add a comment explaining the nesting rules for good measure. Recent versions of systemd are triggering this, and it can also be demonstrated with the following trivial test program: --------------------8<-------------------- int main(void) { int e1, e2; struct epoll_event evt = { .events = EPOLLIN }; e1 = epoll_create1(0); e2 = epoll_create1(0); epoll_ctl(e1, EPOLL_CTL_ADD, e2, &evt); return 0; } --------------------8<-------------------- Reported-by:Paul Bolle <pebolle@tiscali.nl> Tested-by:
Nelson Elhage <nelhage@nelhage.com> Acked-by:
Jason Baron <jbaron@redhat.com> Cc: Dave Jones <davej@redhat.com> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: <stable@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Joe Perches authored
Some find using utf-8 in commit logs inappropriate. Some patch commit logs contain unintended utf-8 characters when doing things like copy/pasting compilation output. Look for the start of any commit log by skipping initial lines that look like email headers and "From: " lines. Stop looking for utf-8 at the first signature line. Signed-off-by:
Joe Perches <joe@perches.com> Suggested-by:
-
Joe Perches authored
Mark obsolete/deprecated strict_strto<foo> and simple_strto<foo> functions and macros as obsolete. Update checkpatch to warn about their use. Signed-off-by:
-
Andrew Morton authored
clarify comment Cc: Huang Ying <ying.huang@intel.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Andy Shevchenko authored
There is no functional change. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Andy Shevchenko authored
There is no functional change. Signed-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by:
-
Andy Shevchenko authored
There is no functional change. Signed-off-by:
-
Andy Shevchenko authored
There is no functional change. Signed-off-by:
Jesper Nilsson <jesper.nilsson@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by:
-
Andy Shevchenko authored
As suggested by Andrew Morton in [1] there is better to have most significant part first in the function name. [1] https://lkml.org/lkml/2011/9/20/22 There is no functional change. Signed-off-by:
-
Michael Holzheu authored
Commit 84c95c9a ("string: on strstrip(), first remove leading spaces before running over str") improved the performance of the strim() function. Unfortunately this changed the semantics of strim() and broke my code. Before the patch it was possible to use strim() without using the return value for removing trailing spaces from strings that had either only blanks or only trailing blanks. Now this does not work any longer for strings that *only* have blanks. Before patch: " " -> "" (empty string) After patch: " " -> " " (no change) I think we should remove your patch to restore the old behavior. The description (lib/string.c): * Note that the first trailing whitespace is replaced with a %NUL-terminator => The first trailing whitespace of a string that only has whitespace characters is the first whitespace The patch restores the old strim() semantics. Signed-off-by:
Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: Andre Goddard Rosa <andre.goddard@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Wang Sheng-Hui authored
Signed-off-by:
Wang Sheng-Hui <shhuiw@gmail.com> Signed-off-by:
-
Glauber Costa authored
These variables are only used when CONFIG_HOTPLUG_CPU is enabled, they are ifdef'ed everywhere else. So don't define them when CONFIG_HOTPLUG_CPU is not enabled. Signed-off-by:
Glauber Costa <glommer@parallels.com> Signed-off-by:
-
H Hartley Sweeten authored
__bitmap_parse() and __bitmap_parselist() both take a pointer to a kernel buffer as a parameter and then cast it to a pointer to user buffer for use in cases when the parameter is_user indicates that the buffer is actually located in user space. This casting, and the casts in the callers, results in sparse noise like the following: warning: incorrect type in initializer (different address spaces) expected char const [noderef] <asn:1>*ubuf got char const *buf warning: cast removes address space of expression Since these casts are intentional, use __force to quiet the noise. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Len Brown <len.brown@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
Akinobu Mita authored
When SPIN_BUG_ON is triggered, the lock owner information is reported. But it is omitted when spinlock lockup is detected. This information is useful especially on the architectures which don't implement trigger_all_cpu_backtrace() that is called just after detecting lockup. So report it and also avoid message format duplication. Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by:
-
